Deleting unused clips in Events

I'd like to get rid of all video not used in each iMovie 09' video I've made but find 'Space Saver' very unclear.
Can anyone tell me how to do this?
Thanks,
Mike

Mark them as Rejected, then use Space Saver to move them to the Trash, then empty the Trash

Similar Messages

Titles or Music in Project Shift when deleting unused clips from Event

When deleting unused clips from an Event ("Move Event to Trash | Delete Unused") the Titles and/or the Music / Voiceover shifts in time within the project built from clips in that Event. Sometimes, the music slides later, so instead of starting at the beginning of the project, it's slid over by 20 or so. Other times, the music stayed anchored, but the titles moved to later times. In some cases, the titles not only moved, but streched in time, so that a 5 second title placed at 10 seconds into the project, became a 47 second title, starting 35 seconds into the project! This has happened to four projects and I just verified again as part of this posting that it is still an issue. Easy enough to slide the clips and music back where they belong but now it says "Itunes" and "YouTube" is out of date; they are not - it's iMovie that got confused.

You're performing a 'Ripple delete' by using the DEL key. Use the DELETE key to perform a 'Lift delete'. The DELETE key is located just above the backslash key.
-DH

What can be done to avoid getting the following error when trying to delete unused clips he operation could not be completed. *** -[__NSArrayM insertObject:atIndex:]: object cannot be nil

what can be done to avoid getting the following error when trying to delete unused clips in Imovie 09 "the operation could not be completed. *** -[__NSArrayM insertObject:atIndex:]: object cannot be nil" I use to get these type of error messages when trying to delete unsused clips from a large event 60 minutes or longer, but now I get this message when trying to reduce a 4 minute event.
Also, does anyone know if there is a limit to the total amount of space that can be taken up by Projects in Imovie 09
Thanks for any help

Zachy,
It goes something like this...
Put your new drive in the enclosure. Use Disk Utility to format it, etc. I'd give it a slightly different name than the original. Let's say you have Old Disk and New Disk as your drive names. Use Carbon Copy Cloner to copy Old Disk to New Disk. Now you should have an exact copy, which you can test by rebooting and holding down the Option key. Choose New Disk from the list and let it boot, make sure all is well.
Shut down and physically swap the drives. Take Old Disk and put it in the enclosure. Now your system has a new disk with a lot more space and you can reformat your old disk and just use it for large files or whatever.

Deleting Unused Clips?

Is there a way to delete unused clips not used in a project? iMovie has that option, but I can't find it in Final Cut Pro X. Or is there a way to see which clips are used in your project and which are not?

Witih the project open, click the "Page" button in the lower left of the window. If you mouse over it, the tooltip will tell you it is the "Timeline Index". When you open it, by defauilt it will list all clips in use with that project. It will actually show you every "clipped clip". So if you have trimmed a lot of stuff and have 20 "subclips" of the original clip from the Event Browser, you will see 20 clips of the same name.
If you have played around in it, perhaps it will show other information. In that case, just click "clips" at the top and "Video" at the bottom.
It is a very useful little window. If you want to go to a particular clip in the project, just click on it in the Index.
If you have set up titles, click the "Titles" button at the bottom, and you can go to any title by clicking on it.
Similarly, if you have set up markers, you can click "tags" at the top of the window and "markers" at the bottom of the window, then click any name and go to the marker.
A feature I really love is being able to turn markers into "todo" items to remind yourself (for instance) to go back to put in a title, or work on the color correction a bit more, or whatever.
Anyway. More information than you asked, but that's the way to tell what clips have been used.
Unfortunately, having left many things out of FCPX from FCP 7, I guess they felt obligated to leave a few things out of "iMovie Pro" as well, and one of them is that cool colored bar that quickly informed you of what parts of what clips have been used in the project.

Delete unused Clips in FC Express HD

Is there no funktion in FC Express HD to delete unused clips of an project?
This is important for me, cause if have to watch and select many hours of HD-Material.
I need help. Could you help me?

That's what i assumed.
I hope that apple will see that missing function.
I hope that it is including in the next update.

IMovie 08 - Deleting rejected clips in Event

I've rejected some movie clips in iMovie 08 (red bar shown), but when I click the button to move these to the trash, no action occurs. Any suggestions? -Don

i get spinning wheel that does not stop....not even after hours. I manually shut down, and it deletes the entire project. I cant find a good solution anywhere to this.

Consolidate not deleting (still including) unused clips?

I try to consolidate like I usually do, deleting unused clips and leaving 1 sec of handles to a duplicated sequence and copying files, so I can back up the source sequence files to DVD. I usually edit a 2 min piece and it's around 2-3 GB in size (XDCAM HD files). After ending up with 8 GB, I wondered what was wrong. I looked at the resulting files after consolidating and the entire clips were maintained and in-tact even though I checked "delete unused media from duplicated items". Why is FCP doing this? Is there a way to avoid it?
My guess: The clips are all transcode from 5Dm2 clip using mpeg streamclip, so I don't know if timecode was produced or properly handled, but I read somewhere that timecode is required to properly consolidate. Might this refer to the sequence timecode or timecode of source clips? And if so, is there a way to add timecode during transcode process?
Anyone experienced this or know what's going on?

Why is FCP doing this? Is there a way to avoid it?
It's because those clips don't have *Reel Names*. In that situation, Final Cut Pro sees the media as coming from a source that is not possible to recapture. It protects you against potential loss of media by saving all of it.
To assign a Reel Name, click a clip in the Browser then press command and 9 keys to bring up the Item Properties window. In the Format section, you will see that the Reel Name column is already highlighted for you to input the information.

Deleteing Unused video files

In Premiere Elements 9, I can delete unused clips displayed in the Organizer, but when I delete the original video file, Premiere 9 still asks for the unused file when loading a project. How do I tell Premiere 9 the file is no longer needed and to remove it from the list of needed video files?

BobL52
Get into the project.prel with the missing media by clicking Skip All on the Missing Media messages that you encounter trying to open the project.
Then delete all instances for the missing file or files in all of the following locations:
a. Timeline
b. Organize Header Media Tab in row below the Organize
c. Organize Header, Project Tab in row below the Organize Header
The files that you seek should have the characteristic red green arrows which form a circle look.
ATR

Deleting unused footage in the Event library?

I always make an edit of my videos and therefore end up with a fair amount of footage in each event which is not needed any more.
Is there a way of deleting unused footage from a specific project from it's event?

Use the Reject Tool to drag with your mouse over the frames you don't need. They will be marked with a red bar underneath. If you want to reject a whole clip, you can right-click and reject the clip that way too.
Then, select "Rejected Clips Only" in the selection box at the bottom.
Finally, click "move rejected clips to trash".

How do I invert a selection in iMovie 11/ delete unused portions of clips

I want to delete unused portions of clips:
In iMovie 11 an orange bar appears at the bottom of a clip to show that that portion of the clip is being used in a project.
If I click on the orange bar, the yellow clip selection extends to that portion of the clip.
I want to invert the selection so that the portion of the clip that is not used is selected so that I can reject it and later delete unused portions.
If there is another way to do that then great...
Thanks
David

I think it might be easier to first finish the project with all that extra video clip lying around and then use the Space Saver to tidy things up. It's under the File Menu and is always done at the very end when you have already Finalized your project.
From the iMovie Help:
In the Event Library, select one or more Events.
To select more than one Event at a time, press Command as you click Event names.
Choose File > Space Saver.
The File menu appears in a light gray bar across the top of your computer screen.
Select any of the following:
To reject all of the video that hasn’t been added to an iMovie project, select “Not added to any project.”
To reject all of the video that you haven’t marked as “favorite,” select “Not marked as Favorite.”
To reject all of the video that you haven’t marked with a keyword, select “Not marked with a keyword.”
Click “Reject and Review.”The view changes to show only the rejected clips in the selected Events.
*Note: This is not the full listing of Help for the Space Saver function but you get the idea. It seems as though Apple thinks it's a much better use of your time to put off the house keeping tasks like cleaning up unused video until after you have Finalized the project.

I made a movie in iMovie then deleted the clips in it. I have reimported the clips in an event with the same name as previously and some clips in the movie are still saying source slip missing even though they are there. What can I do?

I made a movie in iMovie then deleted the clips in it. I have reimported the clips in an event with the same name as previously and some clips in the movie are still saying source slip missing even though they are there. Some clips are fine in the movie, but most are just black and when I hover over them, it says source clip missing. How to I fix this? Thank You

I did that too, then I did a migration assistant to a new Mac and ALL of my movies have Source Clip Missing now, even though the original clips are still in the iPhoto Videos. I can stand to re edit one or two projects, but not ALL.

Media Manager not deleting unused media from HDV (intermediate codec) clips

I have a project which uses HDV footage which I captured using the Apple Intermediate Codec. I now have a bunch of clips that are very large in file size so I'd like to use the Media Manager to delete all the unused footage from the clips. I have tried countless different selections of sequences, clips in the browser, clips in a timeline etc but can't seem to get the Media Manager to show a smaller file size for the processed files based on 'Use Existing' with 'Delete unused media' option. The two size meters at the top always stay the same. Can the media manager trim HDV/Apple Intermediate Codec footage? If not is there a way to get rid of the footage that I haven't used? Thanks!
Ben

I've never mastered MM. If I want a small section out of larger clip, I simply just export that section of the clip using 'current settings'.
Hope someone who has tamed the MM beast will step in here and offer you a better way...
good luck.
x

Cant locate offline clips after deleting unused media using Media Manager

Hi,
I recently used Media Manager for the first time to clean up an old project of mine, and delete unused media to save some space. Having read and re-read all manuals/help I proceeded with the 'Use Existing' command in the Media Manager...and now a big portion of my files are offline.
There was no option to 'save to a location' but when I go to 'reconnect media' the pathway for these offline files is -
Macintosh HD:private:var:tmp:folders.501:TemporaryItems
and the clips are labelled with '-2' or '-3' after their name.
Ive used spotlight and searched through my HD and lacie - and I cant find the location above at all! Im getting worried, as i need to go back into the project to make some really minor changes but cant face re-capturing material then eye-matching the shots ive used, it will take days! These clips must be floating around somewhere on the system?
Please please help! Thank you!!

Thanks Chris - I can go back to my source material although dont know if I can batch capture ok as the source material was captured in an old version of FC Express and had been moved over to my new FCP 4 - dont know if this might cause problems...i hope not!
Regarding the backup of source material - just wondering if theres any other way to make those files smaller - it seems a waste of valuable storage space if Ive captured say an hours worth of footage but only ended up using 20 mins of it in my end sequence (for example). Is there no way to get rid of that extra 40 mins of media that ill never use again?

My event is saying background activities are running even though they aren't- it wont let me import clips to that event or make a multicam clip. what should i do? ( i had deleted some clips from this event that were elsewhere)

Some clips somehow showed up in one of my events that belonged elsewhere. I deleted them from this event. Now it says background activities are running and wont let me import a file to start a multicam clip.
Thanks

Some clips somehow showed up in one of my events that belonged elsewhere. I deleted them from this event. Now it says background activities are running and wont let me import a file to start a multicam clip.
Thanks

Deleting iphoto clips in imovie

In Imovie, I can see and edit my iphoto videos. If i delete these iphoto clips within imove, are they deleted completely or do they remain in iphoto? Thanks so much for your help.

Thank you SO MUCH. That will explain why, when I have copied an iphoto clip (within imovie) to an imovie event and then deleted the iphoto clip (within imovie), suddenly my hard drive filled up to capacity. So it sounds like I need to go to iphoto and delete that clip, in order to save space. This leads me to 2 further questions:
1 - If i have copied the iphoto clip into an imovie event, will it remain in my imovie event if I delete it from iphoto? I don't want to lose these clips, I just want to tidy up my video clips and would rather keep them in imovie events than iphoto, if thats possible.
2 - If I delete the clip from iphoto but have used some bits of it in an imovie project - will it delete only the unused sections of that clip and where will it store the used clips if I delete the source clip in iphoto?
Hope these questions make sense and cannot thank you enough for helping me.

Deleting unused clips in Events

Similar Messages

Maybe you are looking for