Deleting user status profile in equipment master

Hello experts,
can anyone tell if it's possible to delete a user status profile. Once we used an user status profile in an equipment i cannot find i way to delete or change the profile to another profile.

Hi,
You can only change the user status profile in the equipment provided no status value has been set. Once a status value is set (maybe as intital status) the field is closed for input and no change can be made to the profile.
-Paul
Please use [Enterprise Asset Management (EAM)|Enterprise Asset Management (SAP EAM); forum for PM/CS specific topics

Similar Messages

  • Config User Status to the Equipment Master User Status

    All,
    I created a user status profile and assigned the same user profile to a sales order item category and also an equipment master. I was hoping that when I created my sales order and selected a user status and then saved the order and also delivered and PGId the delivery. I was hoping since it's the same user status profile that my equipment master would get updated automatically but it didn't. Is there anyway to do this that anyone knows of without using a user exit? Thanks for any help in advance.

    Hi,
    For single equipment, there would be "n" number of PM orders. While doing MIGO, PM order status will be changed by automatic. Why do you want to change the Equipment Status? How do you want to change the status. Please elaborate your concern.
    Regards,
    Maheswaran.

  • How to change the status profile of equipment?

    Hi Experts,
    Is it possible to change the user status profile for already created equipment? I tried to change the assignment of status profile to equipment category and found it works only for new equipments. It is not applicable to already created equipments. The status of the status profile is already used in equipments.
    Please suggest and do the neeful.
    Thanks and best regards,
    Praveen.

    No you can not change status profile assigned with already created equipment.
    Eg. You assigned status profile 00000003 to equipment category M of equipment. so whnever any new equipment created will get status profile 00000003 only.
    For your case, dont make any change status profile no .00000003--> make whatever changes you have to made about status naming,sequence keeping same status profile.
    After that goto equipment change master edit>change category>selet same category for assignment. so equipment will get same status profile with status changed.
    Hope this will help you.

  • In Service Orders - Adding addition status in User Status Profile

    Hi Guyds,
    I have a question.
    Customer have a requirement where, in repair process when they receive the defective device (equipment) thru return delivery they want to put the device in contamination. And once the contamination is done they want to stage the device for repair. They are asking how can this requirement be met or mapped in SAP system? I suggested we can define additional user statuses in user status profile. Like when the device is received the user can manually set the user status as "Put to decontamination" status in service order. And once the decontamination is complete, then user can manually set another user status as "Decontamination complete" (just as an example). Customer has agreed with this suggestion.
    Now, my question is I can meet this requirement by adding addtional statuses to the user profile and then assigning the user profile to service order right? And as customer has agreed that user will have to manually set these statuses in service order, so customizing/configuring the status profile should suffice right? Or do I have to perform any enhancement? Please advice but remember that the customer has agreed to setting the user status manually, automation is not required. So, in this case do I still have to go for any enhancement to meet this requirement or can I do it just by defining extra statuses in user status profile.
    Please guide me. Appreciate your help.
    If you have any questions or need any clarifications, please let me know.
    Best regards,
    Abdul Rafey

    Hi
    As you correctly pointed out user status will be straight answer. there is no enhancement required. you have to create the user status and assign the same for the order type .
    also you can automate to some extent ex while order created you can make the "Put to decontamination" as initial and while releasing the order you can automate that "device for repair" will be set on releasing
    regards
    thyagarajan

  • Object Types in User Status profile for Investment managment

    Is there any one who has idea about what object types should I select in User Status Profile for Investment management . this is very urgent .
    Regards
    Rama Shanker Sharma

    Dear Ram,
    User Status can be maintained in the system as foll
    Maintain the Status Profile first in OK02
    Status no       Status        Short text         Initial status flag    lowest    Highest
    10                  NBU            Not Budgeted             ^                10          20
    20                  BUD           Budgeted                                      10          20      
    in
    Status
    NBU
    maintain the required fields as required by your process requirement
    Material purchase order
    Material purchase requisition
    Partially release project
    Release etc
    and define each line item weather it should be No influence/Allowed/Warning/Forbidden/No Action/Set/Delete
    Repeat the same logic for
    Status
    BUD
    I hope this solves your problem, if not please write in detail your requirement.
    Regards,
    Vikat Verlekar

  • Automatic Selection of  "User Status Profile" for Inspection lot

    Hi all,
    I have created "User Status Profile" for particular plant to block UD if Results are not recorded ; I want this 'User status profile' to be selected automatically in record usage decision screen - qa11 of inspection lot .Please let me know how to go about this?
    Thanks
    Veeresh

    You can call the inspectiion whatever you want up to I think 6, (maybe 8) characters.
    You can use 04pppp where pppp = your plant ID.  So 041000, 042000, 042010, 043000, 043140, etc...
    In the insepction type setup in the material masters you can set the inpsection type you want to use in that plant as the "preferred" one by checking that box in the inspection setup in the material master.
    FF

  • User Status Profile for an Installed Base

    hello everybody!
    I need your help! I want to assign a User Status for an Installed Base, Anybody knows what is the step by step for this?
    I already have the User status profile, but i dont know where I can assign it into de Ibase.
    I think is into this Dialog step but I'm not sure. This is SAP CRM 7.0.
    Thank you so much for your help, regards!

    Hi,
    You need to add the below Object Types in your user status profile.
    Go into your user status profile and click on the Object Types as highlighted below and then enable the list of object types. Then you will be able to see the status profile in the IBase header.
    Enable these object types for IBase.
    Allowed Object Types
    General Object
    Ibase Header
    Product Master Data
    Regards,
    Siraj

  • User Status Profile for Notification PM

    Dear Masters,
    I know the steps to create the user statuses and user status profile for notification but I want a brief description on maintaining the user statuses. Can i have any document that can explain me the user statuses.
    Hope to find the reply soon. Thanks in advance.
    Chin2

    Hi Naveen,
    Thanks for such a valuable reply, this document is very much helpful to me. See the below example i am showing for the status profile i have created
    STATUS PROFILE:  ZP-NOTIF
    Status number        Status     description                                          Init      Lowest       Highest      position     priority
             1                    OPEN       Open Notification                                no        1                   1                 1               1
             2                    RUNG      Equip. Running Condition                    no         1                   2                1               1                
             3                    NRUN      Non-Running Condition                       no         1                   2                1               1                
             4                    CLSD      Closed                                                 no         1                   2                1               1                
    When I am trying to set the first status (OPEN) to the notification, it works fine but even after I am assigning the order to this notification, put notification in process, assign equipment I cannot set the next status (i.e., RUNG) it is showing me the following error:
    "Status RUNG is not allowed (QNF 100000000000) "  -> -> 
    Diagnosis
    The user status 'RUNG' has reference number 02.  In the current object status 'QNF 100000000000', the reference number of a status may not be higher than 01.
    Procedure
    You can only set user status whose reference number is not higher than 01.
    please help me solving this question its a bit urgent.
    Thanks once again for your replies.

  • Different user status profile for network header and activities

    Hi everyone!
    Is there any way to define different user status profile at network header level and at network activity level? As far as I know, it is only possible to enter a user profile at network type level, and both netwok headers and activities use the same statuses. Does it work this way?
    Thanks!
    Regards.
    Edited by: Thalos on Jul 2, 2011 12:27 AM

    Hi Punith, Hi abdul!
    Thanks for the reply!
    I've gone through the OPSC, but the thing is that here you define a user status profile at network plant level. But I need to define it at network activity level.
    The reason why I need this is because we have types of activities. We use network activities for client activities, for internal activities, to identify and follow-up risk management, etc. Each group of activities -since they have different usages- has different user status associated. But as I don't have any way to assign different user status profiles, all the activities have the same statuses, although  they will only use some of them.
    Thanks!
    Regards,
    Thalos.

  • Delete user status

    Hi,
    as per our requirement, we have 5 user statuses for item level --
    Open
    In process
    Partially Delivered
    Delivered
    Now the problem is that with change of a previously saved order, the 2nd status 'in process' is being set. The transaction analysis in the system says that 'Error     User status InPr must not be deleted     Long text exists".
    Does anyone know how to ensure that the second status gets deleted so that the next status can be set for the line item?
    Thanks for any pointers.
    regards
    Edited by: Jaya Nigam on May 29, 2009 10:29 AM

    Hi,
    Please look into this thread.
    deleted user status
    Thanks
    CHinmaya

  • User Status Profile at Component Level in PM order

    Hi All,
    How can we assign a User Status Profile at the component level in a PM order.
    System statuses are available at component level. And these system statuses control other business transaction also. I want similar to system status, I should have some User status, which can control some business transaction.
    Please share some inputs.
    Thanks,
    Piyush

    Hi Thyagarajan,
    Thanks for the reply.
    My actual requirement is as follows:
    The component's tab page will have many component line items.
    I want a seperate PR for each one.
    But I want that based on an influencing factor, I should be able to control, the timing when PR is generated for each component line item.
    i.e. PR should not be generated together for all line items, but at different times for diff line items.
    Please give some input.
    Thanks and regards,
    Piyush

  • Bapi for Project User Status Profile

    Hi,
    Is there any bapi that contains the field "Status Profile (STSMA) of the Project? I only can find the WBS status...
    Thanks in advance.
    LM

    Hi,
    Thanks for your reply.
    But this function is to get the status... The problem is when creating a project by BAPI, the "user status profile" field (STSMA) is not available to fill. In this case, it happens if we have 2 schemes for projects, the bapi only puts the first that appears and I want the 2nd one to be fullfilled.
    How can we create a projet by bapi and have this field?
    Thanks in advance,
    LM

  • BAPI_BUS2173_SET_STATUS should be able to set user status profile.

    Hi,
    I need use a workflow to setup user status profile for PHASE and TASK, but I found that the unique easy way to setup the user status profile for PHASE or TASK is manual operation.  I have created a user status profile of the BUS2173 and BUS2175. I can't use BAPI_BUS2173_SET_STATUS function to setup user status profile, but it can be used to setup a user status after the user status profiel has been setup by manuay.
    Why?
    Best regards,
    Arrow Yang.

    Hi,
    Try calling BAPI_BUS2173_SET_STATUS first time for setting the status profile by passing the status profile in iv_status_profile parameter and the phase guid but not passing the user status to the bapi.
    Now after this again call the same bapi, this time just passing the user status and phase guid and not passing anything in the status profile.
    We have used this bapi to set the status profile.
    Regards,
    Simmi

  • Marketing user status profile

    Hi experts,please answer this question.
    I am working on marketing planning, i have requirement to create user profile .
    I have created and assigned my profile to Marketing Plan , but I don't know how to assign the user status profile  with system status profile.
    Please answer this question and send your reply to [email protected]
    thanks and regards
    madhusudan

    Solved....

  • User status profiles

    While for both project and WBS the user status profile is assigned in the project profile, the network activity status profile is assigned in the network type.
    But where to default the network status profile?  Or in the network type it should be for both: network and activity?
    Thank you.

    Yes,  you can default same user status profile for both network profile and activity.
    if maintain XYZ user staus profile for network type ps01( example) and maintaining same network type in network profile ABC.
    then you are having same user staus profile in both netwok as weel as activity.
    Venkatesh

Maybe you are looking for