Deleting Windows Logical Drives and Reallocating for Reuse as Raw Devices

Can I delete 2 obsolete OCR/Voting Disk Windows 2003 SP 1 logical drives on a raw disk? They are at the beginning of a disk volume that contains other raw ASM and active OCR/Voting disk logical drives. I want to recreate these 2 logical drives for testing OCR and Voting disk mirroring.

Well I deleted the old logical drives that were previously used for OCR and Voting Disk. They were on the beginning of a LUN that also has ASM logical drives as well as new logical drives for OCR and Voting. All this was to test out procedures for moving the voting and ocr.
The test went well and everything still worked after deleting the old logical drives. I never got to the point of reprovisiong that space for reuse...but I assume I could. Unfortunately, I am running 10.2.0.1 Windows and the inter-node workings become unstable whenever I do a new config to the raw LUN. I learned the hard way that it is best to set all services to manual on both nodes, reboot and restart CRS a node at a time.
I'm assuming that many of inter-node stability issues are fixed if I got to 10.2.0.3, right?

Similar Messages

How can I find fingerprint reader driver and software for windows 8.1 Pro - HP Dv5 1225et

I have Hp dv5 1225et Laptop. There are drivers in Hp's web site for win 7 and vista.. I need validity sensors driver and software for windows 8.1 Pro (64Bit)... Thanks a lot all of users.

Hi @mfatihbodur
Welcome to the HP Support Community. I see that you are looking for Windows 8.1 version of your Validity Sensor and SimplePass software. I have included the links below but as your model doesn't have drivers I can't guarantee that they will work but they are the latest versions.
Validity Fingerprint Sensor Driver (Windows 8.1)
HP SimplePass Identity Protection Software (Windows 8.1)
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Windows 7 - Driver Availability Chart For Creative Products is nearly useless

<span class="text">[url="http://support.creative.com/kb/showarticle.aspx?sid=605">Windows 7 - Driver Availability Chart For Creative Products[/url] is outdated Windows pre-release drivers (at least for the Audigy SB0090 series) back from July. This appear to be revamped Vista drivers that are not usable for W7 RTM. MS made changes to W7 where most Vista drivers do not work properly any more.
When I try to install the drivers through the installer I get the incompatibility error and the installer quits, then I get the failed install pop-up for W7.
What I would like to know is when Creative plans on releasing drivers that work with W7 RTM? Llinking drivers that worked for W7 RC is not helping and really should be removed.
I have used Creative sound cards since just before the SB6 came out. I have been a loyal Creative customer from early on. But if Creative can not deali'ver a fully working driver suit for my sound card by the end of the month (November) I would appreciate knowing so I can start looking for another a replacement, which won't be a Creative product.
Even though my last 3 MBs have had good built-in sound, I have went out and bought Creative sound cards because I wanted the best, which Creative has previously provided.
I need to upgrade my MB so I have put of buying a new sound card until I do. But if I'm forced to buy a new sound card because Creative says it will provide drivers that work with W7 RTM and for what ever reason can not do so, I will not be buying another Creative product.
I maintain 4 PCs of my own so that will be 4 cards bought from a competitor since Creative has completely dropped the ball. All major component manufacturers have been able to release stable drivers at the same time as W7 RTM release , or within days after release. Why hasn't Creative been able to do so? Creative was able to release suitable drivers for RC in a timely fashion, what happened with W7 RTM? Did they recently fire all the programs and techs?
Please do not link useless info. Please find out what is going on and tell the powers-that-be at Creative they have some really upset customers and ask them to tell us what is happening here. Tell them we would like to know when Creative plans on releasing drivers for W7 RTM so we can make the decision to wait it out or buy replacements.

Again, yes Device Manager has no problem detecting the card and W7 has no problem loading the default Window drivers for it.
Since I had to replace my TV Tuner Card, I used Device Manager to remove it and my Audigy card and then shut the PC down. My new TV Tuner Card is a PCI-E x so I installed it in an open slot and move the Audigy to the PCI slot where the old TV Tuner Card was.
When I started my PC again, W7 detected the Audigy card and loaded the defeult drivers. I again tried to use the installer and had the same error.
The sound works, but I only have basic Windows functions/controls.
It is most definately not a hardware issue.
The online auto update detects it, just the installer does not detect it.
I am currently awaiting a response from CS now. Of course the problem there is that you have to wait/respond, wait/respond, wait/respond just to cover the same ground that has been gone over a hundrd times already.
I put every step I have done in the email. As usual, it was a waste to type because you are asked questions already answered and to preform steps already done.
It would be nice if CS would realize that some of us are only contacting CS because we have already done all the standard steps without success and now need to move onto the advanced ste
ps.

Windows 7 Driver Availability Chart for Creative's products

Hello Everyone,
There is a Knowledge base article that contains the Windows 7 Driver Availability Chart for Creative's products. Please note that the date in the chart may vary from time to time in accordance to Microsoft's plans on Windows 7 release.
Thank you.

For Windows 7
To run the Hardware and Devices troubleshooter in Windows 7, follow these steps:
Open the Hardware and Devices troubleshooter by clicking the Start button , and then clicking Control Panel.
In the search box, enter troubleshooter, and then click Troubleshooting.
Under Hardware and Sound, click Configure a device.

HT201250 I've just used an external drive to back up my Mac with Time Machine. I have Lion, but didn't click and check the "Encrypt Backup Disc". What should I do? Can I delete the external drive and start again, or can I encrypt later?

I've just used an external drive to back up my Mac with Time Machine. I have Lion, but didn't click and check the "Encrypt Backup Disc". What should I do? Can I delete the external drive and start again, or can I encrypt later?

I guess if stolen or lost it would protect my "stuff", and if I'm travelling would protect my privacy.
You must understand the purpose and implications of encryption before deciding whether to use it.
Encryption locks your data with a password. If you forget that password, the data is lost beyond any chance of recovery. Neither Apple nor anyone else will be able to help you recover that data if you don't know the password.
By the same token, the password must be strong enough to provide the security you want. For example, if you're the potential target of industrial espionage by a government or large corporation, you need the strongest possible password. To create and manage such a password safely is a task in itself, not to be undertaken lightly.
If you're only concerned about casual snooping by someone with no special skill, a weak, easily-remembered password is appropriate.
But regardless of the strength of the password, if you lose it, the data is gone forever.
Another point to remember is that if you encrypt your data on one storage device, you must also encrypt it on all other storage devices that would be accessible to the same attacker. Otherwise the data isn't protected. For example, if you keep your computer and your backup drive in the same room, and the internal drive of the computer is not encrypted, then there's no point in encrypting the backup drive.

When will a Windows 8 driver be available for the Pixima ip1500?

When will a Windows 8 driver be available for the Pixima ip1500?

That's a cop out answer. I know it's not compatable, there's no driver! There's no excuse for not providing an updated driver for Windows 8. There is NOTHING about windows 8 that is so different from Windows 7 that Canon cannot easily delelop a driver for it. If I am forced to buy a new printer because you won't provide a driver for my ip 1500 it wont be a Canon.

Can i use time capsule for external h drive and also for time machine?

Can i use time capsule for external h drive and also for time machine?

Hello, vascocaco.
If I understand correctly, you're wondering if you can use your Time Capsule's internal hard disk both for Time Machine backups and as an ordinary drive. Is this your question?
You can, but Time Machine backups may take longer.
To do it, you should partition your Time Capsule's hard disk to create one volume for the backups and one for other files.

Hi to all, I use Windows 7, 64Bit and Lightroom 5.7, Camera Raw 8.7, when I develop or export files (mostly Raw Fils from Nikon D810) after 10 to 20 pictures my computer shuts down or I get a bluescreen. Please tell me why.

Hi to all, I use Windows 7, 64Bit and Lightroom 5.7, Camera Raw 8.7, when I develop or export files (mostly Raw Fils from Nikon D810) after 10 to 20 pictures my computer shuts down or I get a bluescreen. Please tell me why.

Blue screen/Computer shuts down is almost always a hardware malfunction or a driver problem.
Make sure your video driver is up to date.
If it is, then the next suspect, in my mind, is overheating, make sure all of the fans in your CPU case are working properly.

Hard drive and system recovery question - "No boot device"

I replaced a 320Gb - 5400 rpm drive that failed with a 750Gb - 7200 rpm drive. Using the HP System Recovery disks to reload the OS, once it goes through the restoration process the mb doesn't seem to recognize the hard drive and I get the "No Boot device" message upon rebbot. Unfortunately, the BIOS is not the best and it won't allow me to see if it actually recognizes the new hdd, which I suspect it doesn't - even though the Recovery Manager seems to . Either that or I have a bad MB.
Sytem information - HP G71-340US
Processor - 2.20 GHz Intel Core2 Duo Processor T6600
BIOS - InsydeH20 3.5
So even though Recovery manager *appears* to be installing W7 just fine, but it's a no go when it's time to actually boot to it, what is the problem? Is this a mb issue or did I just buy the wrong hd?

Well, a few reboots later and it seems the issue is no longer the mb or the hd. W7 is having a tough time though, and am now working on the second system restore, this time from the recovery partition, to try and get it to load fully. When I reinstalled from the System Recovery DVD the second time through, I skipped installing the third (driver) disk and that appeared to help. Just wish I could get the OS to comply. Maybe the third time will be a charm?

Windows 7 and Windows 8 Driver Availability Chart for Creative's products

Hello Everyone,
There is a Knowledge base article that contains the Windows 7 and 8 Driver Availability Chart for Creative's products.
Thank you.
Mod Notes: Updated the link and include Windows 8.

For Windows 7
To run the Hardware and Devices troubleshooter in Windows 7, follow these steps:
Open the Hardware and Devices troubleshooter by clicking the Start button , and then clicking Control Panel.
In the search box, enter troubleshooter, and then click Troubleshooting.
Under Hardware and Sound, click Configure a device.

My macbook pro hard drive died. I only have a windows hard drive and an old powerbook G4 which of course you can't use to create a boot disk for my macbook. How can I solve this?

I can't get app store on my old power book to download OS X, My macbook pro hard drive died and all I have is a windows hard drive, still has windows os on it, a 500 Gb USB drive and this power book. How can I get my macbook back up without spending money? Thanks

And what happens if the OPs Mac is of a newer version that came with a version of Snow Leopard above the 10.6.3 version that is on that Retail, meant for Upgrade, disc? Like if it came with 10.6.4/.5/.6/.7? That disc you linked to would not work.
He needs to contact Apple and get a replacement set of Original System Reinstall Discs. That is the only way he can be assured it will work and he would also get the iLife apps which he wouldn't buying that DVD disc you linked to.
dwb wrote:
The Snow Leopard DVD is $20 from Apple. You'll just have to wait a few days. BTW this is a full installer that works with any model computer that can run SL. Apple used to ship recovery/installation disks that were tied to specific computer models so that a 15" MBP installer disk coudn't be used on a 13" MBP computer. So you need either full installer or the recovery disks for your specific model.
And BTW, I have a 2009 13" MBP w/8GB RAM that is running Mavericks. With a 5400 RPM drive I used to experience a bit of beach balling (think hour glassing) but an SSD has given it new life. It feels now slower than the newest MBPs - it obviously benchmarks considerably slower but in everyday use it doesn't feel like a 4 1/2 year old computer at all.

Windows 8.1 and looking for DeskJet 882C Driver

I am upgrading to Windows 8.1 and need a driver for an DeskJet 882C Printer. Any ideas where I find one?

There is no full feature software for this printer in WInodws 8/8.1 but it does have an in-OS driver. Click on the link below and it should help you get your printer working.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03460648&cc=us&dlc=en&lc=en&os=4132&product=593...=
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star**

Can i delete my recovery drive and create a new one? (HP Envy m6 ko25dx)

Hi, I have an HP envy m6 ko25dx that I had some issues upgrading from Windows 8 to 8.1. I was getting stuck at a black screen on start up. I had to contact HP support by phone and they ended up sending me a flash drive with factory recovery data. When I went through the process of getting my computer working again, one of the steps affected the recovery partition on drive D: to store the data from the flash drive in order to proceed. I finished the process and got my computer back to Windows 8. After completing that, I now have a problem. When clicking on file explorer, the D: drive shows as almost full but when I click on it to view files, it says "this folder is empty" . When I go to computer management-storage-disk management, I have 2 recovery drive D:'s. One shows NTFS for file system, while the other has a blank and they are both 11% free (89% full). Also, there are 3 other un-named volumes; 2 have a status of "healthy (recovery partitions)" and 1 has a status of "healthy (EFI system recovery)". Those un-named volumes are a total of 1,100 mb's (1.1 gb) and they are each 100% free. The only thing that shows when i right click all of those volumes, D and un-named, is help and when I click that, it is in fact, not helpful. When I right click the C: drive, it shows: open, explore, mark partition as active, etcetera... Is there a way for me to access and move the un-named volumes back to C:? And is there a way for me to delete the D: drive data and re-create the recovery data from this point? A week ago I dared to try upgrading from 8 to 8.1. During the process it was recommended that I create a recovery set but was unable to so due to the full D: drive and the fact that i didn't have an external storage large enough. I decided to update the drivers and proceed without creating the recovery set or creating a volume large enough from the space I have on C:. When the computer was done with installing and updating everything it could, it got stuck on a black screen again, this time with the cursor and the ability to access the task manager with Ctrl+Alt+Del. I had to use that to manually download the Windows 8.1 drivers since it wasn't possible to do it from 8. 8.1 is now working. I keep getting warnings about D: being so full and I understand having a nearly full drive affects computer performance. If more information is needed, please let me know. Thanks for reading if you made it this far!
This question was solved.
View Solution.

All the "drives" you see are part of Windows 8 and HP's factory installation. The recovery partition is designed to return the computer to a factory like state and nothing more. You cannot delete the D: drive "HP Recovery" partition and recreate an updated recovery image. The following image shows the factory installed partitions on my HP 13 Split x2;
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

AnyConnect pre Windows login connects and disconnects for some users

Hi,
I have Cisco VPN AnyConnect (version 3.1.0310) clients with a connectivity issue which manifests as follows:
A user boots their Windows 7 SP1 laptop up.
Before Windows login, the user clicks "switch user" and enters their Cisco AnyConnect credentials (this connects OK).
Once the VPN tunnel is established a user logs into Windows.
At this point, 1 of 2 things happen:
1. Most users VPN connection stays connected and user GPO processing\logins work as normal
2. For a minority of users, the VPN connection disconnects and then reconnects. The VPN disconnect and reconnect causes connectivity issues with mapped drives and Outlook (most likely due to GPO processing not applying as the VPN tunnel wasn't established at the required time).
There are no known commanalities between problematic users - all users are in the same OU and laptops are in the same OU, so they should be getting the same AD settings. The same user can login 14 times OK, but may experience this issue on the 15th occasion.
Within the profile xml file (stored in c:\program data\) the key "AutoConnectStart" is set to false for user controllable and default value. The XML policy settings are being applied correctly (we've checked Event ID 3010 within the Cisco AnyConnect Windows logs).
What we have noticed from using the back end Cisco monitoring client is that users who experience connection issues, connect pre windows login OK, but once they're logged into Windows the Cisco VPN AnyConnects seems to try and re-connect, which causes the current VPN tunnel to disconnect and re-connect. This disconnect and re-connect for users seems to cause issues with logon and GPO processing.
So far, the only rock solid way we've found of stopping this disconnect and re-connect behaviour is by configuring a system deny permission on registry key "HKLM\Software\Microsoft\Windows\CurrentVersion\Run". This key contains an entry for Cisco AnyConnect VPN. Unfortunately setting a deny on the individual node value isn't possible and if the key is deleted or modified the system re-creates it. I'd rather avoid setting a system deny on the key for all users.
Any advice on how troubleshoot and diagnose this problem is appreciated.
Thanks

I've attached some log files in case someone is particularly keen eyed at spotting issues (all data is anonymized)
6
Oct 30 2013
10:19:31
172.16.12.17
58124
10.5.128.21
8080
Built inbound TCP connection 123678229 for outside:172.16.12.17/58124 (172.16.12.17/58124)(LOCAL\jpk789) to inside:10.5.128.21/8080 (10.5.128.21/8080)
6
Oct 30 2013
10:19:31
172.16.12.17
58122
10.5.140.210
443
Teardown TCP connection 123678214 for outside:172.16.12.17/58122(LOCAL\jpk789) to inside:10.5.140.210/443 duration 0:00:00 bytes 11971 TCP Reset-O
6
Oct 30 2013
10:19:31
172.16.12.17
51368
10.5.141.155
53
Teardown UDP connection 123678191 for outside:172.16.12.17/51368(LOCAL\jpk789) to inside:10.5.141.155/53 duration 0:00:00 bytes 110
6
Oct 30 2013
10:19:31
172.16.12.17
58123
10.5.12.182
88
Built inbound TCP connection 123678217 for outside:172.16.12.17/58123 (172.16.12.17/58123)(LOCAL\jpk789) to inside:10.5.12.182/88 (10.5.12.182/88)
6
Oct 30 2013
10:19:31
172.16.12.17
62455
10.5.141.155
53
Teardown UDP connection 123678189 for outside:172.16.12.17/62455(LOCAL\jpk789) to inside:10.5.141.155/53 duration 0:00:00 bytes 430
6
Oct 30 2013
10:19:31
172.16.12.17
58122
10.5.140.210
443
Built inbound TCP connection 123678214 for outside:172.16.12.17/58122 (172.16.12.17/58122)(LOCAL\jpk789) to inside:10.5.140.210/443 (10.5.140.210/443)
6
Oct 30 2013
10:19:31
172.16.12.17
56197
10.5.141.155
53
Built inbound UDP connection 123678212 for outside:172.16.12.17/56197 (172.16.12.17/56197)(LOCAL\jpk789) to inside:10.5.141.155/53 (10.5.141.155/53)
6
Oct 30 2013
10:19:31
172.16.12.17
58121
10.5.12.179
389
Built inbound TCP connection 123678196 for outside:172.16.12.17/58121 (172.16.12.17/58121)(LOCAL\jpk789) to inside:10.5.12.179/389 (10.5.12.179/389)
6
Oct 30 2013
10:19:31
172.16.12.17
58120
10.5.12.199
80
Built inbound TCP connection 123678195 for outside:172.16.12.17/58120 (172.16.12.17/58120)(LOCAL\jpk789) to inside:10.5.12.199/80 (10.5.12.199/80)
6
Oct 30 2013
10:19:31
172.16.12.17
51368
10.5.141.155
53
Built inbound UDP connection 123678191 for outside:172.16.12.17/51368 (172.16.12.17/51368)(LOCAL\jpk789) to inside:10.5.141.155/53 (10.5.141.155/53)
6
Oct 30 2013
10:19:31
172.16.12.17
62458
10.5.12.182
389
Built inbound UDP connection 123678190 for outside:172.16.12.17/62458 (172.16.12.17/62458)(LOCAL\jpk789) to inside:10.5.12.182/389 (10.5.12.182/389)
6
Oct 30 2013
10:19:31
172.16.12.17
62455
10.5.141.155
53
Built inbound UDP connection 123678189 for outside:172.16.12.17/62455 (172.16.12.17/62455)(LOCAL\jpk789) to inside:10.5.141.155/53 (10.5.141.155/53)
6
Oct 30 2013
10:19:30
IPSEC: An inbound remote access SA (SPI= 0x67ED9B28) between 80.21.182.245 and 75.12.34.56 (user= jpk789) has been created.
6
Oct 30 2013
10:19:30
IPSEC: An outbound remote access SA (SPI= 0x9C00507E) between 80.21.182.245 and 75.12.34.56 (user= jpk789) has been created.
6
Oct 30 2013
10:19:30
Group User IP <75.12.34.56> AnyConnect session resumed connection from IP <75.12.34.56>.
5
Oct 30 2013
10:19:30
Local:80.21.182.245:4500 Remote:75.12.34.56:62457 Username:jpk789 SA UP. Reason: New Connection Established
4
Oct 30 2013
10:19:30
Local:80.21.182.245:4500 Remote:75.12.34.56:62457 Username:jpk789 Warning Configuration Payload request for attribute 0x7041 could not be processed. Error: Unknown/Unsupported Attribute
4
Oct 30 2013
10:19:30
Local:80.21.182.245:4500 Remote:75.12.34.56:62457 Username:jpk789 Warning Configuration Payload request for attribute 0x7040 could not be processed. Error: Unknown/Unsupported Attribute
4
Oct 30 2013
10:19:30
Local:80.21.182.245:4500 Remote:75.12.34.56:62457 Username:jpk789 Warning Configuration Payload request for attribute 0x703f could not be processed. Error: Unknown/Unsupported Attribute
4
Oct 30 2013
10:19:30
Local:80.21.182.245:4500 Remote:75.12.34.56:62457 Username:jpk789 Warning Configuration Payload request for attribute 0x703e could not be processed. Error: Unknown/Unsupported Attribute
4
Oct 30 2013
10:19:30
Local:80.21.182.245:4500 Remote:75.12.34.56:62457 Username:jpk789 Warning Configuration Payload request for attribute 0x703d could not be processed. Error: Unknown/Unsupported Attribute
4
Oct 30 2013
10:19:30
Local:80.21.182.245:4500 Remote:75.12.34.56:62457 Username:jpk789 Warning Configuration Payload request for attribute 0x703c could not be processed. Error: Unknown/Unsupported Attribute
4
Oct 30 2013
10:19:30
Local:80.21.182.245:4500 Remote:75.12.34.56:62457 Username:jpk789 Warning Configuration Payload request for attribute 0x703b could not be processed. Error: Unknown/Unsupported Attribute
6
Oct 30 2013
10:19:18
172.16.12.17
64287
10.5.12.182
445
Teardown TCP connection 123673186 for outside:172.16.12.17/64287(LOCAL\jpk789) to inside:10.5.12.182/445 duration 0:02:01 bytes 14605 Tunnel has been torn down
6
Oct 30 2013
10:19:17
172.16.12.17
64278
10.5.141.144
445
Teardown TCP connection 123672510 for outside:172.16.12.17/64278(LOCAL\jpk789) to inside:10.5.141.144/445 duration 0:02:15 bytes 9237 Tunnel has been torn down
6
Oct 30 2013
10:19:14
172.16.12.17
64273
10.5.140.231
445
Teardown TCP connection 123672368 for outside:172.16.12.17/64273(LOCAL\jpk789) to inside:10.5.140.231/445 duration 0:02:16 bytes 7297 Tunnel has been torn down
6
Oct 30 2013
10:19:04
172.16.12.17
54449
10.5.141.155
389
Teardown UDP connection 123672541 for outside:172.16.12.17/54449(LOCAL\jpk789) to inside:10.5.141.155/389 duration 0:02:01 bytes 366
6
Oct 30 2013
10:19:04
172.16.12.17
137
10.5.141.155
137
Teardown UDP connection 123672421 for outside:172.16.12.17/137(LOCAL\jpk789) to inside:10.5.141.155/137 duration 0:02:04 bytes 486
6
Oct 30 2013
10:19:00
172.16.12.17
138
10.5.141.155
138
Teardown UDP connection 123672424 for outside:172.16.12.17/138(LOCAL\jpk789) to inside:10.5.141.155/138 duration 0:02:01 bytes 177
6
Oct 30 2013
10:18:58
172.16.12.17
63666
10.5.141.155
389
Teardown UDP connection 123672316 for outside:172.16.12.17/63666(LOCAL\jpk789) to inside:10.5.141.155/389 duration 0:02:01 bytes 366
6
Oct 30 2013
10:18:58
172.16.12.17
53105
10.5.141.155
389
Teardown UDP connection 123672300 for outside:172.16.12.17/53105(LOCAL\jpk789) to inside:10.5.141.155/389 duration 0:02:01 bytes 366
6
Oct 30 2013
10:18:47
172.16.12.17
61715
10.5.12.182
389
Teardown UDP connection 123671945 for outside:172.16.12.17/61715(LOCAL\jpk789) to inside:10.5.12.182/389 duration 0:02:01 bytes 312
6
Oct 30 2013
10:18:43
172.16.12.17
54262
10.5.12.179
389
Teardown UDP connection 123671801 for outside:172.16.12.17/54262(LOCAL\jpk789) to inside:10.5.12.179/389 duration 0:02:01 bytes 355
6
Oct 30 2013
10:18:42
172.16.12.17
57911
10.5.141.156
389
Teardown UDP connection 123671777 for outside:172.16.12.17/57911(LOCAL\jpk789) to inside:10.5.141.156/389 duration 0:02:01 bytes 365
6
Oct 30 2013
10:18:40
172.16.12.17
123
10.5.12.182
123
Teardown UDP connection 123671670 for outside:172.16.12.17/123(LOCAL\jpk789) to inside:10.5.12.182/123 duration 0:02:01 bytes 136
6
Oct 30 2013
10:18:40
172.16.12.17
58107
10.5.12.179
389
Teardown UDP connection 123671639 for outside:172.16.12.17/58107(LOCAL\jpk789) to inside:10.5.12.179/389 duration 0:02:01 bytes 356
6
Oct 30 2013
10:18:40
172.16.12.17
58825
10.5.12.179
389
Teardown UDP connection 123671633 for outside:172.16.12.17/58825(LOCAL\jpk789) to inside:10.5.12.179/389 duration 0:02:02 bytes 355
6
Oct 30 2013
10:18:39
172.16.12.17
60424
10.5.141.156
389
Teardown UDP connection 123671611 for outside:172.16.12.17/60424(LOCAL\jpk789) to inside:10.5.141.156/389 duration 0:02:01 bytes 365
6
Oct 30 2013
10:18:38
172.16.12.17
56635
10.5.141.156
389
Teardown UDP connection 123671566 for outside:172.16.12.17/56635(LOCAL\jpk789) to inside:10.5.141.156/389 duration 0:02:01 bytes 365
6
Oct 30 2013
10:18:38
172.16.12.17
61204
10.5.12.179
389
Teardown UDP connection 123671558 for outside:172.16.12.17/61204(LOCAL\jpk789) to inside:10.5.12.179/389 duration 0:02:01 bytes 355
6
Oct 30 2013
10:18:38
172.16.12.17
50615
10.5.12.179
389
Teardown UDP connection 123671545 for outside:172.16.12.17/50615(LOCAL\jpk789) to inside:10.5.12.179/389 duration 0:02:01 bytes 355
6
Oct 30 2013
10:18:38
172.16.12.17
57940
10.5.141.154
389
Teardown UDP connection 123671537 for outside:172.16.12.17/57940(LOCAL\jpk789) to inside:10.5.141.154/389 duration 0:02:02 bytes 313
6
Oct 30 2013
10:18:38
172.16.12.17
57939
10.5.141.156
389
Teardown UDP connection 123671536 for outside:172.16.12.17/57939(LOCAL\jpk789) to inside:10.5.141.156/389 duration 0:02:02 bytes 366
6
Oct 30 2013
10:18:38
172.16.12.17
64495
10.5.12.182
389
Teardown UDP connection 123671532 for outside:172.16.12.17/64495(LOCAL\jpk789) to inside:10.5.12.182/389 duration 0:02:02 bytes 356
6
Oct 30 2013
10:18:37
172.16.12.17
62965
10.5.12.182
389
Teardown UDP connection 123671521 for outside:172.16.12.17/62965(LOCAL\jpk789) to inside:10.5.12.182/389 duration 0:02:01 bytes 356
6
Oct 30 2013
10:18:37
172.16.12.17
54994
10.5.12.179
389
Teardown UDP connection 123671514 for outside:172.16.12.17/54994(LOCAL\jpk789) to inside:10.5.12.179/389 duration 0:02:01 bytes 356
6
Oct 30 2013
10:18:37
172.16.12.17
54993
10.5.12.179
389
Teardown UDP connection 123671513 for outside:172.16.12.17/54993(LOCAL\jpk789) to inside:10.5.12.179/389 duration 0:02:01 bytes 356
6
Oct 30 2013
10:18:37
172.16.12.17
63390
10.34.140.104
389
Teardown UDP connection 123671483 for outside:172.16.12.17/63390(LOCAL\jpk789) to inside:10.34.140.104/389 duration 0:02:01 bytes 385
6
Oct 30 2013
10:18:37
172.16.12.17
63389
10.33.140.104
389
Teardown UDP connection 123671482 for outside:172.16.12.17/63389(LOCAL\jpk789) to inside:10.33.140.104/389 duration 0:02:01 bytes 384
6
Oct 30 2013
10:18:10
IPSEC: An inbound remote access SA (SPI= 0x5650EE30) between 75.12.34.56 and 80.21.182.245 (user= jpk789) has been deleted.
6
Oct 30 2013
10:18:10
IPSEC: An outbound remote access SA (SPI= 0x42DBDD66) between 80.21.182.245 and 75.12.34.56 (user= jpk789) has been deleted.
6
Oct 30 2013
10:18:10
Group User IP <75.12.34.56> AnyConnect session lost connection. Waiting to resume.
5
Oct 30 2013
10:18:10
Local:80.21.182.245:4500 Remote:75.12.34.56:57103 Username:jpk789 SA DOWN. Reason: peer lost
6
Oct 30 2013
10:17:42
172.16.12.17
64250
10.5.141.186
445
Teardown TCP connection 123671908 for outside:172.16.12.17/64250(LOCAL\jpk789) to inside:10.5.141.186/445 duration 0:00:57 bytes 454851 TCP Reset-I
6
Oct 30 2013
10:17:20
172.16.12.17
137
172.16.13.255
137
Teardown UDP connection 123673268 for outside:172.16.12.17/137(LOCAL\jpk789) to outside:172.16.13.255/137 duration 0:00:00 bytes 0
6
Oct 30 2013
10:17:19
172.16.12.17
137
172.16.13.255
137
Teardown UDP connection 123673244 for outside:172.16.12.17/137(LOCAL\jpk789) to outside:172.16.13.255/137 duration 0:00:00 bytes 0
6
Oct 30 2013
10:17:18
172.16.12.17
137
172.16.13.255
137
Teardown UDP connection 123673218 for outside:172.16.12.17/137(LOCAL\jpk789) to outside:172.16.13.255/137 duration 0:00:00 bytes 0
6
Oct 30 2013
10:16:36
172.16.12.17
63060
10.5.141.155
53
Built inbound UDP connection 123671551 for outside:172.16.12.17/63060 (172.16.12.17/63060)(LOCAL\jpk789) to inside:10.5.141.155/53 (10.5.141.155/53)
6
Oct 30 2013
10:16:36
172.16.12.17
63010
10.5.12.182
88
Built inbound TCP connection 123671549 for outside:172.16.12.17/63010 (172.16.12.17/63010)(LOCAL\jpk789) to inside:10.5.12.182/88 (10.5.12.182/88)
6
Oct 30 2013
10:16:36
172.16.12.17
63009
10.5.12.182
88
Built inbound TCP connection 123671548 for outside:172.16.12.17/63009 (172.16.12.17/63009)(LOCAL\jpk789) to inside:10.5.12.182/88 (10.5.12.182/88)
6
Oct 30 2013
10:16:36
172.16.12.17
63008
10.5.141.156
389
Built inbound TCP connection 123671546 for outside:172.16.12.17/63008 (172.16.12.17/63008)(LOCAL\jpk789) to inside:10.5.141.156/389 (10.5.141.156/389)
6
Oct 30 2013
10:16:36
172.16.12.17
50615
10.5.12.179
389
Built inbound UDP connection 123671545 for outside:172.16.12.17/50615 (172.16.12.17/50615)(LOCAL\jpk789) to inside:10.5.12.179/389 (10.5.12.179/389)
6
Oct 30 2013
10:16:36
172.16.12.17
63007
10.5.12.182
88
Built inbound TCP connection 123671544 for outside:172.16.12.17/63007 (172.16.12.17/63007)(LOCAL\jpk789) to inside:10.5.12.182/88 (10.5.12.182/88)
6
Oct 30 2013
10:16:36
172.16.12.17
55425
10.5.141.155
53
Teardown UDP connection 123671487 for outside:172.16.12.17/55425(LOCAL\jpk789) to inside:10.5.141.155/53 duration 0:00:00 bytes 164
6
Oct 30 2013
10:16:36
172.16.12.17
50614
10.5.141.155
53
Built inbound UDP connection 123671543 for outside:172.16.12.17/50614 (172.16.12.17/50614)(LOCAL\jpk789) to inside:10.5.141.155/53 (10.5.141.155/53)
6
Oct 30 2013
10:16:35
172.16.12.17
56263
10.5.141.156
53
Built inbound UDP connection 123671461 for outside:172.16.12.17/56263 (172.16.12.17/56263)(LOCAL\jpk789) to inside:10.5.141.156/53 (10.5.141.156/53)
6
Oct 30 2013
10:16:35
172.16.12.17
60708
10.5.141.155
53
Built inbound UDP connection 123671460 for outside:172.16.12.17/60708 (172.16.12.17/60708)(LOCAL\jpk789) to inside:10.5.141.155/53 (10.5.141.155/53)
6
Oct 30 2013
10:16:35
172.16.12.17
56982
10.5.141.156
53
Built inbound UDP connection 123671459 for outside:172.16.12.17/56982 (172.16.12.17/56982)(LOCAL\jpk789) to inside:10.5.141.156/53 (10.5.141.156/53)
6
Oct 30 2013
10:16:35
172.16.12.17
64548
10.5.141.155
53
Built inbound UDP connection 123671458 for outside:172.16.12.17/64548 (172.16.12.17/64548)(LOCAL\jpk789) to inside:10.5.141.155/53 (10.5.141.155/53)
6
Oct 30 2013
10:16:35
172.16.12.17
60827
10.5.141.156
53
Built inbound UDP connection 123671457 for outside:172.16.12.17/60827 (172.16.12.17/60827)(LOCAL\jpk789) to inside:10.5.141.156/53 (10.5.141.156/53)
6
Oct 30 2013
10:16:35
172.16.12.17
64207
10.5.141.155
53
Built inbound UDP connection 123671453 for outside:172.16.12.17/64207 (172.16.12.17/64207)(LOCAL\jpk789) to inside:10.5.141.155/53 (10.5.141.155/53)
6
Oct 30 2013
10:16:35
172.16.12.17
137
172.16.13.255
137
Teardown UDP connection 123671443 for outside:172.16.12.17/137(LOCAL\jpk789) to outside:172.16.13.255/137 duration 0:00:00 bytes 0
6
Oct 30 2013
10:16:35
172.16.12.17
137
172.16.13.255
137
Teardown UDP connection 123671442 for outside:172.16.12.17/137(LOCAL\jpk789) to outside:172.16.13.255/137 duration 0:00:00 bytes 0
6
Oct 30 2013
10:16:35
172.16.12.17
137
172.16.13.255
137
Teardown UDP connection 123671441 for outside:172.16.12.17/137(LOCAL\jpk789) to outside:172.16.13.255/137 duration 0:00:00 bytes 0
6
Oct 30 2013
10:16:34
IPSEC: An inbound remote access SA (SPI= 0x5650EE30) between 80.21.182.245 and 75.12.34.56 (user= jpk789) has been created.
6
Oct 30 2013
10:16:34
IPSEC: An outbound remote access SA (SPI= 0x42DBDD66) between 80.21.182.245 and 75.12.34.56 (user= jpk789) has been created.
5
Oct 30 2013
10:16:34
Local:80.21.182.245:4500 Remote:75.12.34.56:57103 Username:jpk789 SA UP. Reason: New Connection Established
4
Oct 30 2013
10:16:34
Local:80.21.182.245:4500 Remote:75.12.34.56:57103 Username:jpk789 Warning Configuration Payload request for attribute 0x7041 could not be processed. Error: Unknown/Unsupported Attribute
4
Oct 30 2013
10:16:34
Local:80.21.182.245:4500 Remote:75.12.34.56:57103 Username:jpk789 Warning Configuration Payload request for attribute 0x7040 could not be processed. Error: Unknown/Unsupported Attribute
4
Oct 30 2013
10:16:34
Local:80.21.182.245:4500 Remote:75.12.34.56:57103 Username:jpk789 Warning Configuration Payload request for attribute 0x703f could not be processed. Error: Unknown/Unsupported Attribute
4
Oct 30 2013
10:16:34
Local:80.21.182.245:4500 Remote:75.12.34.56:57103 Username:jpk789 Warning Configuration Payload request for attribute 0x703e could not be processed. Error: Unknown/Unsupported Attribute
4
Oct 30 2013
10:16:34
Local:80.21.182.245:4500 Remote:75.12.34.56:57103 Username:jpk789 Warning Configuration Payload request for attribute 0x703d could not be processed. Error: Unknown/Unsupported Attribute
4
Oct 30 2013
10:16:34
Local:80.21.182.245:4500 Remote:75.12.34.56:57103 Username:jpk789 Warning Configuration Payload request for attribute 0x703c could not be processed. Error: Unknown/Unsupported Attribute
4
Oct 30 2013
10:16:34
Local:80.21.182.245:4500 Remote:75.12.34.56:57103 Username:jpk789 Warning Configuration Payload request for attribute 0x703b could not be processed. Error: Unknown/Unsupported Attribute
6
Oct 30 2013
10:16:34
Group User IP <75.12.34.56> AnyConnect parent session started.
6
Oct 30 2013
10:16:34
DAP: User jpk789, Addr 75.12.34.56, Connection AnyConnect: The following DAP records were selected for this connection: ContosoPolicy
6
Oct 30 2013
10:16:34
AAA transaction status ACCEPT : user = jpk789
6
Oct 30 2013
10:16:34
AAA retrieved default group policy (DfltGrpPolicy) for user = jpk789
6
Oct 30 2013
10:16:34
AAA retrieved user specific group policy (useGroup1s.Grp) for user = jpk789
6
Oct 30 2013
10:16:34
AAA group policy for user jpk789 is being set to useGroup1s.Grp;
6
Oct 30 2013
10:16:34
AAA user authentication Successful : server = 192.168.7.4 : user = jpk789

Can I recover data from a reformatted hard drive? I did not do a back up prior to talking to Apple Support and the guy having me delete the hard drive and start anew. My bad but is all lost??

Can I recover data from a reformatted hard drive? I did not complete a back up prior to talking to Apple Support and the guy having me delete the hard drive (10.5.8) and start anew (10.6.3). My bad but is all lost?? Years of very important information....

You will need to purchase reovery sofware such as such as FileSalvage
http://subrosasoft.com/software/filesalvage
You can download a demo copy that will tell you what it can recover
If you want to recover that you must pay for the software then
When you do the recovery, you will need another disk drive to receive the recovered files
Having install a new operating system on the disk after the retformat is going to gradually reduce the amount of data that this software will be able to recover for you
Allan

Deleting Windows Logical Drives and Reallocating for Reuse as Raw Devices

Similar Messages

Maybe you are looking for