Deletion of ASN for a delivery

Hi,
For a delivery, an EDI had been processed and an IDOC created via EDI. nOW, THE ORDER HAD TO BE REVERSED for some reasons. So, the Output has been recreated again. Hence, 2 ASN IDOC with same data, and we need to delete the ASN created earlier.
How to do this, as if i go in VL03, header-output, and try to delete the output type for EDI, try to delete it, it says its already in processed state and hence cannot be deleted.
How do i proceed?
Thanks,

Hi,
Identify the inbound delivery created against that ASN and delete that.
Regards,
Ram

Similar Messages

SUS ASN for changed delivery date

We are on SRM 7.0 EHP4 with MM-SUS.
PO is been sent to SUS with Required on date 02/03/2011. Supplier confirms for 02/04/2011.
Now the system doesn't allow the supplier to create ASN in SUS. The SUS system is waiting for a change order from Buyer to be sent so that it can be confirmed with the new proposed date and subsequent ASN to be created.
Business doesn't want to go through these additional steps of changing their purchase order and also will not help them to monitor vendor performance.
Can you please suggest how to avoid delivery date change to purchase order and create the ASN in SUS.
Thanks,
-Devi Swain

devi,
what is the problem?
a) system returns an error message and ASN can not be created? if yes what is the error message?
or
b) the ASN button itself is not enabled for the document creation?
let me know this and i will be able to help you further.

How to delete handling units for a delivery

While deleting delivery note there are hundreds of handling units.
please help me how to delete handling units
Thanks for the help
Rajendra Prasad

Hi
u can delete Handling Units in change view delivery document.. Click Packing it will show Handling Units..By there itself u can delete..
IN VL02N

1 ASN is only for 1 delivery(line item)??

Hi,
1 ASN is only for 1 delivery (line item)?
or others??
Thank you.

Am i understand right in below way??
ASN is for 1 delivery. ASN is for whole delivery and this delivery might contain many line items.
ASN is an confirmation of shipment of this whole delivery.
thanks.

Deletion of Scheduling Agreement and Delivery Schedule using BAPI

Hi SAP MM Gurus,
Please assist in inquiry below:
My scenario is that I am trying to delete delivery schedules and scheduling lines using BAPIs. I have no issues when there is no GR made yet for the delivery schedules. The error arises when there are already existing Goods Receipts and Invoices for the schedule line that I wish to delete
When using the BAPIs (either BAPI_SAG_CHANGE or BAPI_SCHEDULE_MAINTAIN), I set the deletion indicator to "L" and set to X all change relevant fields (i.e. DELETION_INDX). However, whenever I execute it, I get the error message 06088. The funny thing is both the Quantities and the delivered quantities that are normally populated are left blank.
For example:
Normal error for 06088:
Quantity 100.0 smaller than quantity delivered 179.0
Error using BAPI with deletion indicator:
Quantity smaller than quantity delivered
Is this a bug of the BAPI? or am I just missing some settings?
Your immediate response is appreciated
Regards,
DeLo

Hi,
Please find the below link check the setting are correct or not
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a02cb00a-bfb4-2c10-98aa-e33e7f64ba28?quicklink=index&overridelayout=true
Reagrds,
Pramod

MRP issue for future delivery PO/STO date

We have a sceanrio where the available material quantity in MRP list is considering future delivery date STO quantity. The PO delivery date is 08.11.2008 and MRP run date is 07.11.2008.
Step 1, material master details:
Material = 16814, MRP Type = PD, Lot size = EX, Special Procurement = D0 (Stock Transfer), Consumption mode = 2 Backward\forward consumption, Fwd Consumption per = 0.
Step 2, MRP list details , before PO creation:
MRP list before having any purchase order = 191-
i.e, Available qty on 07.11.2008 with a DepReq = 191-
Step 3, Creating Purchase oder (In our case it is STO):
We created one Stock Transport Order on 7th Nov 2008 giving Delivery date as 08 Nov 2008 which is in future. Our plant is receiving plant = y100.
PO quantity = 2
Step 4, Running MRP in MD02:
Processing key       =   NETCH               Net Change in Total Horizon
Create purchase req.   = 1                   Purchase requisitions
Delivery schedules   =   3                   Schedule lines
Create MRP list   =      1                   MRP list
Planning mode     =      3                   Delete and recreate planning data
Scheduling         =     1                   Determination of Basic Dates for Pl
Result = PR is getting created for Qty = 189, but our actual required qty = 191 - meaning it is considering the future delivery date(8th Nov 2008) PO qty while creating PR and removing that qty while creating PR's on 7th Nov 2008.
Here we are running the MRP on today (7th Nov 2008). STO delivery date is 8th Nov 2008
Step 5, MRP List details, after STO creation:
Now the PO is coming in MRP list and the available qty is 189-
Earlier stock before purchase order is 191 - after creating purchase order (STO) for future delivery date available qty is coming as 189-
DepReq is still 191- but the total available qty is changing to 189-
We want PR to be created for DepReq of 191 and not 189.

In step 2
What is the stock?
If it is PO then the qty cannot be in minus 189
step3
Where are u running MRP? In receiving plant or sending plant and all the steps you are showing for which plant?
It is confusing...
What i can say is in general if it is MTS scenario, then system will always consideres stock + receipt - issues = 0 after running MRP.
If it is MTO, then for each sales order/project segment stock + receipt - issues = 0...
Hence apply your situation in the plant and see the data.

Idoc WHSORD for inbound delivery

Hello,
We want to send inbound deliveries to an external WMS (not SAP WM) by using an output in the inbound delivery.
I tried to use idoc WHSORD (basic type DELVRY01) as for Outbound delivery.
I obtained an error message when processing the output : "The message record of the message control contains a partner role with a partner type LS that cannot be used here. Only the 'KU' and 'LI' partner types are allowed."
<u>Configuration done</u> (same as outbound delivery) :
Output : Medium "6 EDI" / Partner type LS
Partner profile (WE20) : Partner type LS / Partner role LS /Message control : Application E1 / process code DELV.
Finally, I've been able to generate one idoc from the inbound delivery by using medium "A ALE" and partner type LI "vendor". But I need to do it for a LS partner as we do want to maintain partner profile for each vendor.
Is this due to some missing configuration linked to application E1 (i.e allow partner type LS ?) ?
How can we solve this ?
Thanks a lot for your help

Hi zhiqiang,
In order to test inbound idocs, you can use transaction WE19 to create manually idocs.
As pre-requisite, you have to maintain ALE configuration : port and partner profiles.
Then in WE19, you can create an idoc from message type : fill all the fields you need to and delete unuse segments. Then click on "Standard inbound" and your idoc will be received in your SAP system.
Check the status in transaction BD87.
To fill correctlly your idoc :
1. You can find documentation on message type in transaction WE60 (when you go in this transaction, check the documention is "active" => Goto => user settings => "Documentation output" and "field value output" must be ticked)
2. In WE19, for some fields, if you press F4, you will get list of possible values.
Good luck,
JP

Delete non-picked items in delivery using iDoc

Hello gurus,
I'm integrating SAP ECC and external WM solutions using iDocs. The outbound delivery is created in SAP ECC and sent to WMS using DESADV iDoc. The picking is performed in WMS and the list of shipped items with batch numbers are returned to SAP and Goods Issue is posted. iDoc WHSCON is supposed to be used for that purpose.
The problem is that in case if not all the line items were shipped it's necessary to delete them from the delivery because otherwise GI will not be posted. But the non-picked items no longer exist in the response iDoc WHSCON so it's even impossible to set QUALF=DEL for these items. WMS sends back only actually shipped items in iDoc, and not the deleted ones.
Do you have any solutions for overcoming this problem?
Maybe there is any BAPI or iDoc qualifier that will allow to delete all items from the delivery so that they will be recreated by the same iDoc? Or there is any checkbox in SAP that will automatically delete unpicked items during posting of GI?
Thanks!

hi
in this both error comes ,
1)E VL 609 20 Delivery has not yet been put away / picked (completely)
a) picking quantity not entered , in delivery , first you enter the picking quantity ,
you create the 2 lines for sale order , so create for one line item for delery , go to vlo1n enter shipping point , sale order number line item number 1 to 1 enter press enter system will take only one item in delivery then you enter the picking quantity , and pgi ,
in delivery two line item only line item enter picking quantity and another line item not enter the picking quantity , it not possible to pgi , both line item you enter the picking quantity ,
you create the same delivery number for 2line item , so first complete the 1st line item pgi and , go to vl02n and enter , click on menu bar out bound deliverrs-delivery sale order -enter sale order number and line item , and do the pgi ,
2)VL 608 20 Delivery has not yet been completely processed by WM
you process activate the wm , so you can do the lt03 , then it will come vlo2n and check the picking quantity it will come auto matically

LSMW for Outbound Delivery

Hi,
I am not able to find an LSMW for creating GR for outbound delivery. I tried using recording in MIGO but it did not work. Also MB1C is not working for outbound delivery. Please help.
Regards,
Anubhav

Hi
I think it is better to write a Z program/ BDC to have a mass GR creation of an outbound delivery.
or
You have an Auto Goods receipt using confimations. If we activate Auto GR in customizing for Confirmation control key. Once confirmations(ASN) is created a GR will be created automatically.
Hope this helps
Regards,
Sasi

Internet sales - List for the delivery type

Hello everybody,
In ISA, when you are connected, and you go in the basket page. You have an list option for the delivery type with "Standard", "Pick up" etc...
I want to modify the element list. Exactly i want to delete one of teh option.
How could i do that.
Somebody knows how to do that?

I found the solution, you can configure in the shopadmin, the option you want to display in the catalog page.

Urgent :--------- Transfer Requirement creating for the delivery

Hi Gurus,
For a Delivery document Transfer Requirement and as well as Transfer Order is creating,
Based on Transfer Order picking was happening in the WMu2026 the PGI for the delivery and Billing properly is happening.
But Open Transfer Requirements are laying for each delivery document, here source is respective storage type and bins and destination storage type 916 and bin is delivery number.
Please suggest me how the it is happening where we did configuration mistake.
Regards
madhu

Hi,
I think you set TR creation indicator for IM mvt 601 (reference mvt) under SPRO > LE > WM > Interfaces > IM > Define Movement Types - LE-WM interface....
Please check it. If it is set delete it.
BR
Csaba

Mandatory fields for inbound delivery idocs

hi all
i want to generate inbound idocs for inbound delivery ASN
i am using message type DESADV and idoc type /AFS/DELVRY03
in order to generate inbound idoc what are mandatory values i have to pass to the idocs
thanks
Anil

HI,
I created inbound idoc for ASN Inbound delivery in test mode we19
i got idoc with status 62, when i am trying to process the idoc in bd87, its allowing me
is there any other way to process the idocs , so that status will be 53
thanks

User Authorization for Outbound Delivery

Hi sap gurus,
I want to restrict sales document delete option for selective users in vl02n(outbound delivery). Can anyone tell me. How to do this?
Warm Regards,
Vinodh Rajendran
Edited by: Vinodh Rajendran on Jul 27, 2009 8:30 AM

Hi,
Check with your BASIS person.
They will provide/delete authorisations for a specific Transaction.
SUIM is the T.Code for checking roles of a Transaction code.
In SU01,by entering the user name one can delete that role for the user.
Regards,
Krishna.

Delete transf reqmt generated by delivery(without cancelling shipment/PGI)

HI Friends ,
I have came across below issue-
A Z delivery type is being used to ship Material to vendor for external processing (Goods issue is NOT done against the delivery but is done against a Process order , it is a type of dummy delivery. Requirements should not get generated for such delivery.
Because of error in configuartion, requirements were getting genearetd which is now corrected , now no new requirements are getting generated for this delivery type.
Now the problem is - How to delete requirements generated for old deliveries (Shipmentment has already been posted , PGI can not be done). These deliveries are now affecting MRP calculations significantly.
To my knowledge , such deliveries can be cancelled only after cancellation of shipment , the solution is not acceptable as there are thounsands of such deliveries lying in system & it would be practically impossible to follow this route for resolution of this issue.
Is there any program / quick way to delete these old requirements without cancelling shipment / without doing PGI ?
Please help, Thanks.
Edited by: Csaba Szommer on Feb 12, 2012 4:41 PM

Sandeep,
Because of error in configuration, requirements were getting generated which is now corrected , now no new requirements are getting generated for this delivery type.
One wonders how the business was able to manage with these 'thousands' of deliveries (which had requirements) for so long, prior to the correction of configuration.,,,
Anyway, if you are lucky, simply rebuilding the requirements file may solve your problem. Run report SDRQCR21 against these materials. Otherwise, for a mass change, you will probably need to develop some custom functionality.
Best Regards,
DB49

Change Ship to party number for outbound delivery

Hi guys
I have a problem
We need to change Ship to party number for outbound delivery
Any suggestions
Any Table level changes posibility???
Thanks
SAP MM

Hi,
You cannot change the ship to party in delivery, nor should you change it.
If you really want to change the SH in delivery, please delete the delivery (after cancelling the picking) and then go to sales order in change mode and then change the ship to party there. After doing this, create the delivery once again with the new SH.
It is not advisable even through programatically to change SH in delivery. This will have lot of implications in the further processes like PGI, Proof of Delivery and so on.

Deletion of ASN for a delivery

Similar Messages

Maybe you are looking for