Deletion of Confirmation (created on 2008) goes in to error

Hi,
When i am deleting the confirmation in SRM which created on 2008, the reversal document goes in to error saying that "
Error whilst creating an entry sheet in the backend system 9300000475 053 Posting only possible in periods 2009/02 and 2009/01 "
The same service entry sheet i have tried to revoke in R/3 and found that when trying to save I need  to change the posting  date manually to current date other wise system is not allowing to save  revoked entry sheet getting same error "Posting only possible in periods 2009/0
2009/01 in company code LA01"
need advice for this
Regards,'
JM

Hello Jairaj,
Check in R/3 backend posting period values in OB52 transaction for you company code.
Regards.
Laurent.

Similar Messages

  • Error while deleting the confirmation- Reason has to be entered for 102

    Hi,
    When i try to delete the confirmation for Goods, an error -"A reason has to be entered for movement type 102" is occuring. I have maintained the reason for rejection in the document tab at the line item level while deleting the confirmation.The reason for movement field is mandatory in R/3 system for movement type 102. I have maintained this reason for rejection that has maintained in the R/3 system in the SRM config and able to select that during deletion of confirmation, but still i am getting this error. Please suggest.
    Regards
    GGL

    sorry for the very late reply..
    Note 1345896 - Error due to reason for movement when deleting the GR in EBP
    When we try to delete a goods confirmation with the Reason for Rejection text in SRM, we get the error "A reason has to be entered for movement type 102" (M7 325) thrown from the backend R/3 system.
    Other terms
    M7 325, RREJ, Reason for Rejection, MOVE_REAS, c_subtype_ca, LBBP_CFF60, FORM mapping_gr_for_backend.
    Reason and Prerequisites
    This is caused by a program error
    it helps aothers too

  • Posting period issue while deleting a confirmation posted for a limit PO

    Hi ..
    I am facing an issue whiel deleting a confirmation posted for a limit PO.
    Confirmation was posted for a limit PO in SRM and it created a service entry sheet in SAP. If I deleted that confirmation in the same posting period, then it is getting deleted. No issue here.
    But if I deleted that confirmation in the next posting period then the reversal document is going to error in process. RZ20 is showing the error "Positng only possible in periods 2012/2 and 2012/3".
    Posting date of reversal document is current date only and the backend posting period is 2012/3, but still it is failing with this posting period error.
    If I tried to delete a confirmation posted for a normal PO then I could able to delete it even in next posting period by just changing the posting date.
    Why this posting occurs while deleting the limit confirmation, even through the posting date is falls within the backenn posting periiod? Is it like, SAP system is trying to delete the service entry sheet in original posting period? Kindly help.
    I am in SRM 5.0 (server 5.5) SP12.
    Thanks,
    Arun

    OK.
    Well, if the variable is not used in any interval selection, then I would say "something happened to it".
    I would make a copy of the query and run it to check if I get the same problem with period 12.
       -> If not, something is wrong in the original query (you can proceed as below, if changes to original are permitted).
    If so, then try removing the variable completely from the query and hardcode restriction to 12.
       -> If problem still persists, I would have to do some thinking.
    If problem is gone, then add the variable again. Check.
       -> If problem is back, then the variable "is sick". Only quick thing to do, is to build an identical variable and use that one.
    If problem also happens with the new variable, then it's time to share this experience with someone else and consider raising an OSS.
    Good luck!
    Jacob
    P.S: what fisc year variant are you using?
    Edited by: Jacob Jansen on Jan 25, 2010 8:36 PM

  • Is it possible to use Siri to send text messages to groups? I want to be able to say to Siri "Send a text message to the people in 'group 4' category." I then dictate the text message, confirm, and out it goes. Groups of 100 to 250 contacts.

    Is it possible to use Siri to send text messages to groups (categories, distribution lists)? I want to be able to say to Siri "Send a text message to the people in 'group 4' category." I then dictate the text message, confirm, and out it goes. Groups of 100 to 250 contacts. What app(s), if any, would I need? Is this in anyway dependent on my carrier?
    Thanks in advance for your help.

    Hmmm, that's strange - just checked again and it is 1066288.
    Note 1066288 - ESS LEA:Workitem XXXX cannot be executed in status COMPLETED
    Perhaps you can't see it because it is a "Pilot Release"?
    Release Status: Pilot Release
    Released on: 26.02.2008  04:54:32
    Priority: Correction with high priority
    Category: Program error
    Primary Component: PT-RC-UI-XS Self Services Web Dynpro

  • How can i stop icloud from downloading all my photos onto my iphone 4s each time I sync. Then, how do I delete them from my phone, there are no delete options. I'm slowly going crazy.

    How can i stop icloud from downloading all my photos onto my iphone 4s each time I sync. Then, how do I delete them from my phone, there are no delete options. I'm slowly going crazy.

    Hi iprover,
      Let me first say that I am NO EXPERT with anything Apple and really have only started looking into this iCloud stuff a few hours ago because I'm trying to help my mom free up some space on her iCloud. But anyway, here's what I'm learning and what I THINK might be happening to you.
    Also, if any Apple support people (do they browse the forums to dish out helpful hints?) or people who probably know infinitely more than me about this stuff, please do chime in and confirm / correct my statements!
    This is what I gather.
    iCloud for Windows is set up with a local folder (let's call it "C:\Users\Administrator\Pictures\iCloud Photos\My Photo Stream") where iCloud will store photos uploaded to the Photo Stream. This will allow you to view your Photo Stream photos on your PC.
    This does not mean that this is a PC backup of your Photo Stream photos, but just a way to view your Photo Stream from your PC. That being said, the general Photo Stream rules apply: 1. No videos are on the photo-stream, and 2. Photos on the Photo Stream will be removed after ~30 days and/or after hitting the Photo Stream limit of 1000 photos.
    My guess is that the iCloud Windows App will delete photos from the local folder that are older than ~30 days and/or delete all but the most recent 1000 items if the 1000-item limit is reached.
    That is a scary thought! I really hope you did not lose all your pictures, but my guess is that the iCloud local folder is NOT meant for backup but instead is the iCloud Windows App's sandbox for updating and managing Photo Stream photos.
    All that being said, I'd say it's important to back up your photos in a separate folder not related to the iCloud local folder.

  • Can we delete a confirmation done in SRM ??

    Hi All,
    Once we have created a Confirmation in SRM against a PO, is it possible to delete it directly
    (i.e. without doing a Returns Delivery)  ??
    Thanks,
    Ruchika

    Hi Ruchika,
    When ever you want to delete a confirmation , you can post the cancellation document for the confirmation which in turn deletes the confirmation posted. You can either perform a cancellation for the complete quantity or partial quantity.
    Hope this answer helps.
    Regards,
    Kalyan

  • When can user delete a confirmation?

    When I'm in the Display/Process Confirmation view, I noticed that come confirmations have the Delete button active, while for some the Delete button is inactive.
    At what point am I not able to delete a confirmation? I thought that once the item received is invoiced, I'm not able to delete the receipt. However, I have a confirmation that has not been invoiced but I'm not able to delete. Is it because this SC is old? It's dated a couple of months back and I just created a confirmation today.
    Please advise.
    SN

    HI,
    Is it because this SC is old?
    It's not based on SC old or new..
    check the confirmation status.. whether its transfered to R/3 Or not
    check inbound and outbound idocs.. if it is not transferd to R/3
    check in RZ20 any error messages..
    Thanks
    prasad

  • Deleting last, next 'create' creates non-empty row

    I have been struggling with this for some hours now.
    I have a table component binded to a VO, based on a EO.
    I have two buttons added to the page. A "CreateInsert" button and a "Delete" button. The delete-button has immediate = true, bc some of the values are required.
    The inputfield on each row are editable and have autosubmit = true
    If I:
    1. Create a row
    2. Edit the row's attributes
    3. Delete the row
    4. Create a row
    then the row that I deleted in step 3 shows up in step 4.
    I have also tried to commiting the data (between 2 and 3, and between 3 and 4).
    This only happens if the deleted row is the last row left in the set (iter.getEstimatedRowCount() = 1 before the delete action)
    BUT! If I set immediate = false on the delete-button, the create / delete works as expected.
    I'm running JDeveloper 11.1.1.5
    The iterator has the ChangeEventPolicy attribute set to 'ppr'
    The delete action has the RequiresUpdateModel set to 'false' - Action is set to 'removeCurrentRow'
    The create action has the RequiresUpdateModel set to 'true' - Action is set to 'createInsert'

    it never happens as you said in jdev11.1.1.5.0.
    by default, both of the buttons having immdieate is should be false. so no need to disturb that.
    if you are going to disturb the oracle standard means what it would be reason?
    hen the row that I deleted in step 3 shows up in step 4.from here i understood what i understood means you get deleted row when you click create insert button if am getting you right?
    this will be my answer:
    you make that createinsert immidieate is true. if so means you could get this behavoiur as you said.

  • My screen on my iMac 2008 goes darker in the top 1/3, readable but why?, My screen on my iMac 2008 goes darker in the top 1/3, readable but why?

    The screen on my iMac (2008) goes darker all the time in the top 1/3 of the screen.  It has been doing this for the past year.  It's readable but just.  Is there anything I can do to correct this or is it just the screen is dying?

    Either the display or graphics card is in trouble. Run Apple Hardware Test in extended mode three times back to back. If errors appear then a hardware issue is confirmed, the next step would be to take the machine in for repair. Because the machine is 6 years old now you may want to consider looking into a replacement for it. 

  • How to create a error message for Deleted batch while creating a PO

    Hi ,
    Can any body tell me how to create error message for a deleted batch while creating a PO in ME21n,
    when a PO is created for a deleted batch at GI &GR lebel it is showing  a error message,
    but i want to show a error message while doing the PO creation.
    Thanks,
    Sachhi

    in badi  me_process_po_cust u can  put this message
    METHOD if_ex_me_process_po_cust~check.

  • How to delete the row created by AddAnotherRow Button

    Hi Every one,
    We have a seeded page in Oracle Sales Opportunity Update.
    Here we have an activities region where we can add activities by clicking on AddAnotherRow Button.
    But there are no restriction of the row created in activities
    The issue we are facing is the end users are clicking the AddAnotherRow Button but not able to clear the row from the table.
    Is there any functionality where the user can delete the row created by AddAnotherRow
    Regards,
    Krishna

    Hi Krishna,
    If the delete functionality is not available on the page then there is no other way, you need to implement it.
    Regards,
    Reetesh Sharma

  • How to delete the automatically created receipt in the expense report

    Hi experts,
    I am getting an error "no expense type for estimated costs has been defined. cannot save" while creating a travel request for an employee.
    Base on the reply from Raynard which posted on Re: FM for  trip exp
    It's because "The estimated cost in plan and request are now included into fund management. So if you have active funds management, the entered estimated cost are used to make availability check and commitment. Therefore you must create an expense type in view V_T706B1. Under 'amounts are' you have to choose 'estimated cost, no reimbursement to employee'."
    How ever, because the linkage with funds management, I faced the problem and also ckecked out the reason from SAP Help that "After the trip takes place, the user needs to manually delete the automatically created receipt in the expense report."
    Anybody can provide the solution how to automatically delete this receipt before user create the expense report??
    Thanks
    Daniel

    Hi Francis,
    Check the BADI "TRIP_WEB_CHECK" method "USER_CHECK_GENERAL_DATA".
    Here based on the schema you can modify the "estimated cost" field.
    Hope it helps.
    Regards,
    Jyothi

  • Error in Process chain while deleting index and create index

    While executing the process chain  for delete index  the process chain failed with the below error message as "The system has not finished loading request 445315 into data target ZECC_C01". While creating index also it failed with error message as "Lock NOT set for: Generate index, RSSM_PROCESS_INDEX terminated, because InfoCube/DSO object ZECC_C01 could not be locked".
    Please help me in solving this issue.
    Thanks & Regards,
    Bharathi

    Hi,
    Manage the data target - ZECC_C01 and check the request number 445315. Also check the subsequent data targets if further loading was erroneous. Check whether the request is green / Properly loaded or not.
    You can also use RSBKREQUEST table to check the request and its corresponding data target.
    This request is either red or yellow caused this failure.
    Hope this helps.
    Regards,

  • Sales Order Confirmation when sales order goes for Credit Block

    want Sales Order to be Confirmed , i e Schedule line Confirmation , when sales order goes for Credit Block
    How i can Achieve this?
    Even when set for Sales Document typpe credit check as 'D' and credit group as ;03; ie at Goods Issue still order is not getting confirmed.

    I am not sure, why you want schedule line to be confirmed for credit blocked sales orders. Re-confirm with the client.
    There are controls when defining delivery blocks.
    Goto IMG - Log.Execution-Shipping - Deliveries- Define delivery blocks( check menu path in system, may not be same as shown here).
    Select 01- credit block " untick" from "Confirmation" Column.
    Now test with & see how ti works.
    Regards,
    Reazuddin MD

  • CS 3.0.1 will not open InDesign files created in 2008  - it says a plug-in may be missing.

    My CS 3.0.1 will not open InDesign files created in 2008.  It says a plug-in may be missing.  I did have a computer crash since I last opened it.  I've tried changing the extension to inx, but that doesn't work.  I cannot get the file to open.  Can someone help?

    The OP is using CS. He/she could be trying to open CS2 or later.
    Simply changing the file extension will do know good and only an INX exported from CS2 will work.
    Bob

Maybe you are looking for