Deletion of customized package

Hi experts,
I need to delete a customized package which has subobjects. So i deleted each subobject individually into a transport request, I released the TR. Now when i try to delete package it says there are sub objects in tht package. When i checked the TADIR table I still find the entries for theese subobjects for this package.
I know there is a question previously on this.. but i tried all those it did not work.
In one post they mentioned to delete using SE03 object directory entry, I tried tht but it says object is already distributed so cannot delete.
In another post they mentioned about deleting the entries using the test program by bruteforcing.
Is there any way i can delete the package?
Thanks,
sapuser.

Hi,
Still the same error.'package contains sub objects'.
Any one pls help me.
Thanks,
sapuser

Similar Messages

Deleting the custom package from system

Hello All,
I have created a custom package and added few custom programs.
I have deleted the custom program first, they were deleted successfully.
At last I try to delete the custom package, I am getting a message as "The package still contains subobjects".
But actual all the objects related to package were deleted.
Please let me know how to delete the custom package completely from the system?
Thanks,
Feroz.

or I think you may remove the package (and its lock) from the transport request, delete the object directory entry of the package (SM30 TADIR), then you can delete the package. Or vice versa (I don't remember exactly).

Error while deleting a customer table

When I try to delete a customer table which is saved as a local object I get an error stating that the table is still used in ABAP Dictionary. It seems that the customer table is still used in a customer program, but the program is already deleted! I deleted the program earlier and thus no longer exist in our system. I cannot find any trace of the program, but am unable to delete the customer table now. Any suggestions?

Program name would have been of the table maintenance generator and you deleted it manually.
It should have been deleted from TMG .
Your problem will be resolved if you will create Table maintenance of the database table and then delete it again.

Bug in Print Module, LR3.6, custom package

Hi everybody,
After two days of unequal fight with Print Module bug I hope I finally pinned it down.
Hope it saves someone time
I have my photos usually cropped in DSLR format (2:3)
Printing I use often two popular formats 13x18cm and 15x21cm that are close to 5:7 (first one is 5x7in)
Initially I was using virtual copies and had them cropped to 5:7 format.
However this makes a little mess in my workflow and it's time consuming.
What I found was Custom Package in Print Module.
Having cell with target size I drag desired photo into the cell and using cmd-key drag this foto to have proper look as the width target format is smaller. So far so good, but ...
From time to time printed photo looked totally different from what I saw on-screen.
First of all there are couple threads about that problem. I visited them but they remain unanswered
http://forums.adobe.com/message/3344521
http://forums.adobe.com/message/3278739
http://forums.adobe.com/thread/697107
http://forums.adobe.com/message/3885690
There are visual samples there of what happens.
Photos in JPG file that was created from LR look differently than in LR. Photos in file are bigger or/and wrong positioned within the cell
What I managed to find is:
Everything goes fine until photo is rotated by 'Rotate to Fit' function. It happens in my case only with photos that have the same orientation that template.
Example:
Template is set on A4 borderless format set to portait (Page Setup... button).
Two cells 14,85cm height x 21cm width (A5 format). First one over second and both in landcape position.
When I drag photo cropped in Landscape orientation such a photo is rendered properly.
When I drag photo cropped in Portrait orientation it's atutomatically rotated 90 degrees (couterclockwise) by "Rotate to Fit option" and that is when **** happens.
Final print (to file or printer) shows that user dragging is omitted in render. What's more if "Photo border" is set to on, photo in this cell is not reduced. Instead of this (as far as I can see) photo border just crop some part of picture.
If I switch orientation of the A4 page from portrait to lansdcape, magically photos that are cropped in portrait orientation start to render good (they are not rotated now) while those in landscape start to render wrong.
This looks 99% as software bug.
I'm using LR3.6 on mac osx 10.6.8
I'd like someone to follow it and to check if the same happens on different Mac or Windows.
Cheers
Robert

Confirmed in LR 5.3, OS X 10.9.1.
Screen display is fine, user repositioning is ignored when printing if page is in landscape mode and the image is rotated 90° (Rotate to Fit on). A4, Epson printer. Bug also appears in PDFs generated via the "Printer…" button. I didn't check JPEG export.

How to delete a customer in R/3 beside vd06?

Hi
how to delete a customer in R/3 besides vd06.
vd06 marks it for deletion though i can create a
sales order with a warning.
Regards,
Abhimanyu.L

Hi
The only way is to archive the customer. If the requirement is to prevent the customer from being used then try VD05 and block the customer.Another alternative is to write code in the user exit mv45afzb and check if the customer is marked for deletion then give an error message
Reward if this helps
Thanks

How to delete a Customer in its SALES AREA?

Hi All,
I've deleted a Customer by t.code OBR2. But it exists again in its SALES AREA.
Could anyone tell me how to delete it in the sales area too?
Thanks

Hi Gandalf,
not possible.
Note 725857 provides some reference coding for your own program.
Regards,
Joosz

Hello, How can I edit or delete a custom label in the contacts list on iOS 7.0.3 on iPhone 4S ?

Hello, How can I edit or delete a custom label in the contacts list on iOS 7.0.3 on iPhone 4S ?
i need it so muchhh!

Sort of depend on what you are trying to do precisely. In Edit mode, if you tap on any label, you will be given a list of options, plus an Add Custom Label option near the bottom of the list

How can I edit or delete a custom label in the contacts list on iOS 7 on iPhone 4S ?

How can I edit or delete a custom label in the contacts list on iOS 7 on iPhone 4S ?

Alfre311 wrote:
I've been trying to find a way to do this since I updated to IOS 7, and I've just found the solution/explanation, even tho is a bit heavy to carry out.
IOS 6 creates custom labels and save them giving you the option to delete them.
IOS 7 creates custom labels but don't save them, so there is no need to have the option to delete them.
But here comes the problem, if you have some custom labes saved in you Iphone / Ipad with IOS 6 and you update it to IOS 7, the device will keep those labels saved, but you wont be able to delete them.
I realized this by going to contacts on Icloud. There those labels that I had on my devices weren't there. So simply restoring your device and configuring it as a new one to later sync your Icloud Contacts, will solve the problem.
I know this post is old, but I might just try this with iOS 8. I have outdated custom labels that annoy me, because I still seem them in the list as options. If I get desperate enough, I may try your solution.

How to delete a custom format in Numbers 3

I am one of the poor unfortunates that has upgraded to Numbers 3 BIG mistake!!
However does anyone know how to delete a custom format in Numbers 3?
I'm not sure where the custom format came from in the erlier version of numbers. I guess I must have created it for something, I can't remember what.
It now appaers that when I send a Numbers 3 document via email to an Excel format it adds a weird custom format that turns currency into garbage. Once in Excel simply going to format cells and deleting this odd format cures the problem.
If I could find a way of deleting it in Numbers 3, hopefully the problem will go away.
This is far from the only problem I'm having with Numbers 3. It's begining to look like I'll have to abandon Numbers 3 having had to go to the expense of buying a new iPad because Numbers 3 documents (and presumably Pages Keynote etc) no longer work on the original iPad.

I never promote the method the deletion unless you understand the underlying tables of planning, if you search on the forum you will see posts on the subject just like this one - Delete dimension from planning application
Cheers
John
http://john-goodwin.blogspot.com/

How to delete a custom dimension in planning - 9.3.1

Hi
some one please let me know how to delete a custom dimension in planning
Thanks

I never promote the method the deletion unless you understand the underlying tables of planning, if you search on the forum you will see posts on the subject just like this one - Delete dimension from planning application
Cheers
John
http://john-goodwin.blogspot.com/

I would like to know how to to deleta a custom template in Pages

I would like to know how to to delete a custom template in Pages

http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=215&highlight=delete +template&mforum=iworktipsntrick
Peter

Issue while running a custom package:ORA-20100: File o2670336.tmp creation for FND_FILE failed.You will find more information on the cause of the error in request log. in Package PA_OPPORTUNITY_MGT_PVT Procedure modify_project_attributes ORA-20100: File o

Hi Guys,
We have created a custom package where in we are trying to call the standard API's of Oracle projects i.e PA_PROJECT_PUB.When we are trying to call these APIs we are facing the below issue.
We have tried testing in two instances ,Initially it worked in both instances.
Using the same API's multiple times we tested the same data set in these instances.
For the first few runs it works fine.But when we go on using the same API's again and again for our testing we face now and then the below issue.
Standard API's
=========
add_task
update_project
change_structure_status
create_draft_plan
Error:
ORA-20100: File o2670336.tmp creation for FND_FILE failed.You will find more information on the cause of the error in request log. in Package PA_OPPORTUNITY_MGT_PVT Procedure modify_project_attributes ORA-20100: File o2670336.tmp creation for FND_FILE failed.
You will find more information on the cause of the error in request log. in Package PA_PROJECT_PUB Procedure update_project:ORA-0000: normal, successful completionError while publishing the task
Please let us know if anyone of has come across the same situation.
Regards,
Vijay

But have issue only with validating invoice batch. I followed metalink ID's 605542.1, 167990.1,261693.1,1088553.1,749491.1, 461271.1 and few more.Was this working before? If yes, any changes have been done recently?
Please see if these docs help.
APXAPRVL: Invoice Validation Errors With MSG-00001 and REP-1419 [ID 333305.1]
Invoice Validation Errors When Others:101505:Non-Oracle Exception Rep-1419 [ID 464125.1]
Invoice Validation Fails with REP-1419 Error in Ap_approval_matched_pkg.Execute_matched_checks [ID 293425.1]
Invoice Validation Failing On Fnd_file Could Not Write To File L0202306.Tmp [ID 461520.1]
Invoice Validation (APPRVL) Errors ORA-20001 APP-SQLAP-10000 PSA_FUNDS_CONTROL_PKG.glxfck [ID 463184.1]
Validate Invoice Error With ORA-20001: APP-SQLAP-10000: AP_FUNDS_CONTROL_PKG.Calc_QV [ID 432702.1]
Invoice Validation Program Is Erroring Out [ID 382844.1]
Error On Validation Of Invoices From Previous Periods [ID 412814.1]
Thanks,
Hussein

How can I get an ucropped image in a Custom Package when using Stroke and/or Border??

How can I get a picture in a Custom Package that has a Stroke and/or a border and get the image shown fully, and not cropped in one way or other?
When I add the stroke/border it adds them inside the cell, thereby altering the ratio of the area for the picture inside it, which crops it in some way. How can I get the image to be uncropped? The controls available seem to all be for the ration of the outside of the cell, but my image is inside the stroke/border and nothing seems to work on it directly ...
Many thanks,
Gary

Perhaps I misunderstood your requirement. I have been frustrated by LR print module and labs effectively squeezing individual shots into existing frames. So I have used LR2Mogrify to export (and then re-import) a 'new image' which manages the discrepancy between a crop and a cell of a different aspect ratio by adding padding - usually 'white' - around the image to a canvas corresponding to cell dimensions. Adding stroke borders can be accomplished in Mogrify inside or outside the image. A custom package, with multiple cell dimensions can be populated with images created in the corresponding aspect ratio(s) for the relevant cells.
I'm not aware of a way of automating the creation of cells in a page to dimensions which change with the crop as discovered - drag and drop images onto a blank page creates cells of the same standard size.

How do I personalize a form to call a custom package instead of standard

We are finding that the vertex tax package is not correctly calculating the taxes for AR late changes. The late payment charge invoices are being created without an item and we know that if we had this in there the taxes would be calculated correctly. We have a solution designed by a senior architect and would like to pursue that approach unless it has been established it is impossible.
From the Batch maintenance form ARIINR.fmb there is a generate button. It calls some pl/sql and eventually the api to create the invoice. What we want to do here is from the when button pressed trigger call a custom package (with most of the same logic intact). The problem is is that we don't want to call both the custom and standard package, only the custom one.
My question is really is there any way to avoid calling the standard package by exiting out of the trigger after the custom package completed? I know I could easily change the standard form to accomplish this but we want to accomplish this in such a way to still maintain our support with Oracle on this form. So we are looking to do this via a personalization or custom.pll change.
Any help would be very much appreciated. Thanks for your time.

To my knowledge, both CUSTOM.pll and Forms Personalization execute code in addition to standard code, not instead off.

How to Download the Custom Package Created with all the objects

Hi All,
Could any body let me know how to download a custom package created in sap with all the objects including webdynpros and modulepool programs.
Thanks.

Hi,
U can use open source programs available in net like Mass Download, ZAPLINK, SAPLINK.
Mass Download --> Download the objects
SAPLINK, ZAPLINK --> Used for downloading and also for importing the downloaded objects to other system.
Regards,
Arun

Deletion of customized package

Similar Messages

Maybe you are looking for