Deletion of data from view

hi all
i have to delete data from a view .i deleted data from all dimension tables but still data exists in one of the table which is a view
can any one give me some inputs
thanks in advance
surya

Hi,
Basically the view doesn't contain any data. It is the table which contains the data. So you can find out the tables on which the view is based and delete the data from them. In SE11, find out the definition of view, there you will also find the tables involved.
Regards,
Yogesh.

Similar Messages

Not able to Delete the data from Memory card

Hi all,
I have bought a new nokia 3120 classic.it is working fine but recently i have received some data from my friend.
Then suddenly the problem begins like.. when i take a photo.. i am getting error like the image is not in the format and i am not able to save that.And also, the main problem is I am unable to delete the data from my memory card.
Every time after deleting i am getting the same data.
Why this happening..is it because of VIRUS?? If so how to delete the virus from my memory card??
When i contacted the nokia care people in bangalore they are saying that they can offer the service of formatting the memory card??
Except that my Phone is working fine..the problem is with Memory card!!!
Please help me...

you can actually format your memory card first see if you have such option on your phone to format directly from the phone if that is not possible you can always use a card reader and reformat your card using your pc. just understand that all data from that memory card will be lost unless you do a back up of it. if you do a back up and restore the data to the memory card after reformat you might get the same issue so be careful as to what you will decide to do with the data from the card. once you format your card it should all be good unless the card is corrupted itself which can also happen. but first try with the reformat and see if it works out for you.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

What would happen if I turn off my backup and delete backup data From my device? Will it delete my music and everything for ever or just stay in the cloud but not on my device?

What would happen if I turn off my backup and delete backup data From my device? Will it delete my music and everything for ever or just stay in the cloud but not on my device?

If you have multiple devices backing up to the Cloud, you will see all of them listed. You would click on each device to change what is backed up from that device. You can then delete your individual back-ups.
Once you have all your settings to your liking, you can then go back to Settings>iCloud>Storage & Backup, and click on Back Up Now (bottom of the screen) to create a fresh backup with your new settings.
Cheers,
GB

How to delete the data from partition table

Hi all,
Am very new to partition concepts in oracle..
here my question is how to delete the data from partition table.
is the below query will work ?
delete from table1 partition (P_2008_1212)
we have define range partition ...
or help me how to delete the data from partition table.
Thanks
Sree

874823 wrote:
delete from table1 partition (P_2008_1212)This approach is wrong - as Andre pointed, this is not how partition tables should be used.
Oracle supports different structures for data and indexes. A table can be a hash table or index organised table. It can have B+tree index. It can have bitmap indexes. It can be partitioned. Etc.
How the table implements its structure is a physical design consideration.
Application code should only deal with the logical data structure. How that data structure is physically implemented has no bearing on application. Does your application need to know what the indexes are and the names of the indexes,in order to use a table? Obviously not. So why then does your application need to know that the table is partitioned?
When your application code starts referring directly to physical partitions, it needs to know HOW the table is partitioned. It needs to know WHAT partitions to use. It needs to know the names of the partitions. Etc.
And why? All this means is increased complexity in application code as this code now needs to know and understand the physical data structure. This app code is now more complex, has more moving parts, will have more bugs, and will be more complex to maintain.
Oracle can take an app SQL and it can determine (based on the predicates of the SQL), which partitions to use and not use for executing that SQL. All done totally transparently. The app does not need to know that the table is even partitioned.
This is a crucial concept to understand and get right.

Not able to query data from View

Hi,
I am not able to fetch data from views even while running simple select statements. I am using SQL Developer Version 3.0.04,
Same query is fetching data on other computers running SQL Developer or Toad.
Has anyone faced this issue??

Is that the first version ever you installed? You unzipped in a clean directory, right?
What OS/JDK/DB versions?
So do you get an error or what?
K.

Error while deleting the data from DSO

Hi Experts
I am getting the ABAP Dumps when I am trying to delete the data from the DSO Objects in my Systems.
"    An entry was to be entered into the table
     "\FUNCTION=RSAR_ODS_GET\DATA=L_TH_ISOSMAP" (which should have
    had a unique table key (UNIQUE KEY)).
    However, there already existed a line with an identical key.
The insert-operation could have ocurred as a result of an INSERT- or
    MOVE command, or in conjunction with a SELECT ... INTO.
The statement "INSERT INITIAL LINE ..." cannot be used to insert several
     initial lines into a table with a unique key.     "
I have tried with multiple DSO's and Have the same issue. Please need your suggestions.
Regards,
Mahesh

Hi......
I think in the ODS setting Unique Data Records checkbox is ticked........if so.........The DataStore object can be used for loading unique data records...........If the loaded request does contain data that is already in the DataStore object, activation of the request will lead to an error.
Find the request in SE16>>RSICCONT table .........and try to delete there....it may work........
Check this.....
u2022 Note 1007717 -Deleting from Data Store object: Termination w/o log
u2022 Note 998704 - Deleting req from DataStore obj: Status at end of processing
u2022 Note 1037507 - System Termination when you delete from DataStore objects
Regards,
Debjani.....

While deleting the data from cube..getting the following erros...

while deleting the data from cube the below error occured in develoment..any help
i have 4 requets.....2 are deltedd but no records for those...
2 are not deleted and they have some data..
please give me u r inputts pelase
Performing check and potential update for status control table
Message no. RSM1490
Diagnosis
If data is loaded into an InfoCube, or existing data is edited (aggregated/compressed/deleted/got from a DataMart), then there is a change in the potential reportability of the data , or the possibility of deleting data by request, or of aggregating or compressing.
This status of each one of these Cubes is stored in a status table, that is updated when there is any change to the status of a request in the Cube.
The system now analyzes the requests in the Cube and compares the calculated status with the status table.
If deviations from the status table arise then you are given the option of adjusting the status table.
System Response Procedure Procedure for System Administration

Hi,
Did you tried by right click on cube and delete data? are those requests are compressed or roll up?

How to delete PSA Data from any Table

Pls specify the steps to delete PSA Data from any specific table.

You can delete the PSA requests manually one by one as specified in the previous posts.
You can also trigger the deletion of PSA periodically by using Process chain.
'Deletion of PSA request' is the process type that need to be used.
By this way you can delete all the PSA requests of the table, that are older than certain number of days.
you can also schedule the PSA deletion for more than one table at a time, by including the tables in the same Process chain.

How to delete the data from KNVP without using the delete statement

Hello friends,
I have a requirement that I have to delete the data from KNVP table without using any delete statement. For it I have to use the Standard BAPI or any standard program.
Can you please tell me the name of the standard program or BAPI to delete the data .
Thanks in Advance
Kuldeep

Hello Raymond,
I have use the function 'CUSTOMER_UPDATE' in which I only gives the data in T_XKNVP table only but still the data is not get deleting. Please see the code below.
=============================================================
REPORT ZK_TEST2                                .
data :
    I_KNA1     LIKE     KNA1,
    I_KNB1     LIKE     KNB1,
    I_KNVV     LIKE     KNVV,
    I_YKNA1     LIKE     KNA1,
    I_YKNB1     LIKE     KNB1.
Data :
T_XKNAS       LIKE     FKNAS occurs 0,
T_XKNB5     LIKE     FKNB5 occurs 0,
T_XKNBK     LIKE     FKNBK occurs 0,
T_XKNVA     LIKE     FKNVA occurs 0,
T_XKNVD     LIKE     FKNVD occurs 0,
T_XKNVI     LIKE     FKNVI occurs 0,
T_XKNVK     LIKE     FKNVK occurs 0,
T_XKNVL     LIKE     FKNVL occurs 0,
T_XKNVP     LIKE     FKNVP occurs 0 with header line,
T_XKNVS     LIKE     FKNVS occurs 0,
T_XKNEX     LIKE     FKNEX occurs 0,
T_XKNZA     LIKE     FKNZA occurs 0,
T_YKNAS     LIKE     FKNAS occurs 0,
T_YKNB5     LIKE     FKNB5 occurs 0,
T_YKNBK     LIKE     FKNBK occurs 0,
T_YKNVA     LIKE     FKNVA occurs 0,
T_YKNVD     LIKE     FKNVD occurs 0,
T_YKNVI     LIKE     FKNVI occurs 0,
T_YKNVK     LIKE     FKNVK occurs 0,
T_YKNVL     LIKE     FKNVL occurs 0,
T_YKNVP     LIKE     FKNVP occurs 0 with header line,
T_YKNVS     LIKE     FKNVS occurs 0,
T_YKNEX     LIKE     FKNEX occurs 0,
T_YKNZA     LIKE     FKNZA occurs 0.
T_XKNVP-KUNNR     =     '7000002648'     .
*T_XKNVP-VKORG     =     '0001'     .
*T_XKNVP-VTWEG     =     '01'     .
*T_XKNVP-SPART     =     '01'     .
T_XKNVP-KZ      =     'D'     .
append T_XKNVP to T_XKNVP.
CALL FUNCTION 'CUSTOMER_UPDATE'
EXPORTING
    I_KNA1        = I_KNA1
    I_KNB1        = I_KNB1
    I_KNVV        = I_KNVV
    I_YKNA1       = I_YKNA1
    I_YKNB1       = I_YKNB1
TABLES
    T_XKNAS       = T_XKNAS
    T_XKNB5       = T_XKNB5
    T_XKNBK       = T_XKNBK
    T_XKNVA       = T_XKNVA
    T_XKNVD       = T_XKNVD
    T_XKNVI       = T_XKNVI
    T_XKNVK       = T_XKNVK
    T_XKNVL       = T_XKNVL
    T_XKNVP       = T_XKNVP
    T_XKNVS       = T_XKNVS
    T_XKNEX       = T_XKNEX
    T_XKNZA       = T_XKNZA
    T_YKNAS       = T_YKNAS
    T_YKNB5       = T_YKNB5
    T_YKNBK       = T_YKNBK
    T_YKNVA       = T_YKNVA
    T_YKNVD       = T_YKNVD
    T_YKNVI       = T_YKNVI
    T_YKNVK       = T_YKNVK
    T_YKNVL       = T_YKNVL
    T_YKNVP       = T_YKNVP
    T_YKNVS       = T_YKNVS
    T_YKNEX       = T_YKNEX
    T_YKNZA       = T_YKNZA
=============================================================

Select data from view ( V_T856 ).

Hi All,
i need to download transaction type and text from V_T856 , but the data is not selected from V_T856 view.
how to select data from a view, is there any special conditions.
i declared V_T856 in tables statement, even though select statement not exicuted.
pls suggest me with relevant information..
thank you
Regards
Ramesh.

hi ramesh,
using Select statement you cannot retrieve the data from view.
use the FM - VIEW_GET_DATA.
call function 'VIEW_GET_DATA'      " func. mod to get data from maintenance view.
    exporting
      view_name = view
    tables
      data      = gt_data.
Regards,
Sakthi.

Delete Transaction Data from date to date

Hi All,
we want to delete transactional data from date to to date
is there any way to delete data from date to todate?
We are aware of following tcodes
OBR1- Reset transaction data
CXDL - Delete transaction data from ledger
But there is no period/from date to date option available
Example:
we are in 2010 now we want to delete data from 2005- 2007 and we don't want to archive
Thanks in advance
Regards,
MS

Hi Eli,
Thanks for the reply,
Yes, you are right its not right to delete data based on the period... but we have such kind of typical scenario
Let me get some other opinion
Regards,
MS

Deletion of Data from Infoprovider after upgradation of source system

HI All,
In our project source system is upgraded from 4.7 to ecc 6.
I have kept the same logical name and changed the RFC connection so that it points to new source system.
Now do i need to delete all data before uploading data from source system or it will be fine as source system name is same.
If i need to delete data ,can u help me how to delete master data especially Hierarchy data. do we need to Delete Hierarchy and recreate it.
Please help em to resolve this issue

Hi,
It depends on your requirements whether you have to keep the history or not.
If you delete the data from your info providers, you have to reload everything from scratch.
If you want to delete the data from all
1. first delete the data in data targets such as cubes, DSO's or ODS then
2. master data
use these programs to delete from se38
-> rsdrd_delete_facts - for Cubes and DSO or ODS
-> rsdmd_del_background - for master data in background
-> rsdmd_del_master_data_texts - for master data right away
manage your master data info objetcs after the deletion, if you still find them....
go to se14 and delete individually each and every table such as attributes, texts, sids, hierarchy.
hope it helps you better.
But I dont recommend you to delete try to load full repair options for all yur loads

Selective deletion of data from ODS

Hai,
I need to delete selectively data from an ODS. I know that I have the option of selective deltionin cube. But how can I delete them in ODS?
Thank you.

Hi Vasu,
In ODS > right click > Manage on the Contents tab you also have the option of Selective Delete...were you looking for something else?

Deleting selected data from an Infocube in BW using ABAP program?

Hi Everybody,
I have to create a ABAP program in SE38 which, on execution will delete selected data from a Cube in BW module. How to achieve it. Is there any function module that can do so? Eagerly waiting for your suggestions.
Regards,
Pulokesh

select the records from the cube or ods and put in to one internal table.
and then u can delete the records

I want to delete my data from iphone while i doesnot have the access but i know my apple id so plz help me its urgent, i want to delete my data from iphone while i doesnot have the access but i know my apple id so plz help me its urgent

i want to delete my data from iphone while i doesnot have the access but i know my apple id so plz help me its urgent, i want to delete my data from iphone while i doesnot have the access but i know my apple id so plz help me its urgent

Welcome to the Apple Community.
You can only wipe your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely.

Deletion of data from view

Similar Messages

Maybe you are looking for