Deletion of data to reduce the size of the SAP instance

Hi ,
Could you please provide me steps of deletion of PO's Req's, Material Masters and any other data that might be plant specific in SAP for a new instance for a site .We want to keep the config and key master data elements but not all the archiveable data in the system.
My information is not relating to archive but delete the data to reduce the size of the SAP instance and any financial data.
Many thanks in advance,
Krish.

resolved

Similar Messages

How do you reduce the size of the email storage on an iPhone? I have deleted all mail items and my mailbox still takes up 1.2 GB of space.

how do you reduce the size of the email storage on an iPhone? I have deleted all mail items and my mailbox still takes up 1.2 GB of space.

What is the Other on my iPhone and How to Remove It
Also
"First you go settings/general/usage/music/then left swipe over music and press delete and you would think it deletes your music but it doesn't instead it deletes your other but make sure your ipod is connected to a computer while doing this"
as recommended by:
How do I get rid of "other" storage: Apple Support Communities
Next, usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
To restore from backup see:
iOS: How to back up
To restore to factory settings/new iPod see:
iTunes: Restoring iOS software

IPhone 5 (16GB) iOS 7.0.4 Mail App size is 1GB and continuously increasing. How to reduce the size of the Mail App?

Hi,
I am using an iPhone 5 (16GB) iOS 7.0.4.
Currently the size of the mail app is 1GB and is continously increasing, even though the advanced settings in the mail account have been set as following:
MOVE DISCARDED MESSAGES INTO:
Deleted Mailbox
DELETED MESSAGES:
Remove: After one day
INCOMING SETTINGS:
Delete from Server: When removed from Inbox
The problem that I am facing is that only a few emails reside on my iPhone as I keep deleting emails, which are also deleted from the server automatically because of the settings as above, which is perfectly fine. The emails are deleted from the Mail app and only a very few of them are visible which I have not deleted as yet, and all is fine till here. The problem is that the size of the Mail app is more than 1GB and is continously increasing, when i check the size of the Mail app in the Settings > General > Usage section.
When I search for an email that has previously been deleted from the search feature by swiping down in the main page, it still comes up in the search, and upon clicking the searched email, it takes me into the Mail app, however, the mail is not there. I have tried searching for emails which were deleted weeks ago, and they still come up in the search feature, however, they DO NOT open in the Mail app when i click them within the search feature in the main page.
Up until a couple of months ago, the size of the Mail app was about 5.2GB and at this point I had no space on my 16GB iPhone 5, therefore I resetted my phone two months ago, and after a complete reset of the iPhone 5, the size of the Mail app went back to 0.3KB (like it was brand new out-of the box); however, within a matter of two months the size of the Mail app has now exceeded 1GB and is continously increasing, as I receive alot of emails which is why I delete them on daily basis and even delete them from the Trash folder (mailbox).
I have read alot of blogs and even checked with other friends using similar settings on the same model, however, I just cant seem to figure this out. I would really appreciate if someone can help me with this issue as I dont want to have to reset it again after another 2-3 months.
There are practically only 14-15 emails on my Mail app with not alot of KBs for these emails, and the trash folder is also empty, but the size of the Mail app is still not reducing. Please help!!
Regards,
Shoaib Malik

Have you tried restarting or resetting your iPhone?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
Also consider deleting and reinstalling the Mail Account in question.

BI Publisher 10g - Limit to the size of the data model?

Hello,
We are using OBIEE 10g 10.1.3.4.1 in our organization and have a problem when working on a large report in BI Publisher. It seems that once our data model gets large enough, we are no longer able to edit the report. When we click on the Edit link to load the report editor, the side menu that lists the data model, parameters, bursting, etc does not load, preventing us from making any changes to the report.
At first we thought it was a timeout issue and changed the following:
$J2EE_HOME/applications/xmlpserver/xmlpserver/js/XDOReportModel.js
Property name : XDOReportModel.TIMEOUTMSEC
set value in Milli seconds as " XDOReportModel.TIMEOUTMSEC = 15000
After making the change and restarting the services, it did not help. Is there a different place for the timeout of loading the report editor? What about some kind of cap to the size of the data model? We have one large data template that is used to generate a report. I tried breaking the large data set into multiple, smaller data sets (still using data tempalte) and that didn't seem to help any. Is there a limit the size of the data model BI Publisher can return?
Any help would be greatly appreciated! Thanks!

Hello,
I think you should create a recordStore with RMS and use it like a string array. You can store huge amount of data and the time access when request data from recordStore is very similar as if it is store on the RAM memory with recent devices.
And if it is not persistent data you can delete the recordStore when closing the midlet.

How to reduce the size of the database

Hi
My recent observation on my DB size and the population of it. Apparently the DB is very fragmented and I have actual data upto 800GB but the container size is more 1.1TB.
Could you kindly recommend me what to do in order to reduce the size of the allocated container space?
I appriciate value suggestions and URLs.
thanks
Raj

Rangarajan wrote:
b) re-organise and then shrink tablespaces.
Means..?In case you are not familiar with the instructions that came with your Oracle database
http://tahiti.oracle.com/
Pick your version, e.g.
http://www.oracle.com/pls/db112/homepage
Type shrink tablespace in the search box at the top of the page
http://www.oracle.com/pls/db112/search?remark=quick_search&word=shrink+tablespace
And pick a link that looks promising and read it, e.g.
http://download.oracle.com/docs/cd/E11882_01/server.112/e10897/storage.htm#ADMQS12071

How to reduce the size of the query

Hi all,
Can any one suggest me how to reduce the size of the following query .
/* Formatted on 2011/07/12 11:02 (Formatter Plus v4.8.8) */
SELECT prs.pa_rqst_srvc_sid,
(SELECT prpre.erroneous_data_value
FROM pa_error pe,
pa_error_detail ped,
pa_request_procedure_run_error prpre
WHERE pe.pa_error_sid = ped.pa_error_sid
AND ped.pa_error_sid = prpre.pa_error_sid
AND ped.oprtnl_flag = 'A'
AND prpre.oprtnl_flag = 'A'
AND prpre.pa_rqst_prcdr_sid = prp.pa_rqst_prcdr_sid
AND pe.pa_error_nmbr = '5031'
AND ped.aaa_segment_loop_nmbr = '2000F') revenue_iid,
(SELECT prpre.erroneous_data_value
FROM pa_error pe,
pa_error_detail ped,
pa_request_procedure_run_error prpre
WHERE pe.pa_error_sid = ped.pa_error_sid
AND ped.pa_error_sid = prpre.pa_error_sid
AND ped.oprtnl_flag = 'A'
AND prpre.oprtnl_flag = 'A'
AND prpre.pa_rqst_prcdr_sid = prp.pa_rqst_prcdr_sid
AND pe.pa_error_nmbr = '5013'
AND ped.aaa_segment_loop_nmbr = '2000F') x12_code_list_qlfr_lkpcd,
(SELECT prpre.erroneous_data_value
FROM pa_error pe,
pa_error_detail ped,
pa_request_procedure_run_error prpre
WHERE pe.pa_error_sid = ped.pa_error_sid
AND ped.pa_error_sid = prpre.pa_error_sid
AND ped.oprtnl_flag = 'A'
AND prpre.oprtnl_flag = 'A'
AND prpre.pa_rqst_prcdr_sid = prp.pa_rqst_prcdr_sid
AND pe.pa_error_nmbr = '5026'
AND ped.aaa_segment_loop_nmbr = '2000F') procedure_iid,
(SELECT prpre.erroneous_data_value
FROM pa_error pe,
pa_error_detail ped,
pa_request_procedure_run_error prpre
WHERE pe.pa_error_sid = ped.pa_error_sid
AND ped.pa_error_sid = prpre.pa_error_sid
AND ped.oprtnl_flag = 'A'
AND prpre.oprtnl_flag = 'A'
AND prpre.pa_rqst_prcdr_sid = prp.pa_rqst_prcdr_sid
AND pe.pa_error_nmbr = '5027'
AND ped.aaa_segment_loop_nmbr = '2000F') mdfr_code,
(SELECT prpre.erroneous_data_value
FROM pa_error pe,
pa_error_detail ped,
pa_request_procedure_run_error prpre
WHERE pe.pa_error_sid = ped.pa_error_sid
AND ped.pa_error_sid = prpre.pa_error_sid
AND ped.oprtnl_flag = 'A'
AND prpre.oprtnl_flag = 'A'
AND prpre.pa_rqst_prcdr_sid = prp.pa_rqst_prcdr_sid
AND pe.pa_error_nmbr = '5028'
AND ped.aaa_segment_loop_nmbr = '2000F') mdfr2_code,
(SELECT prpre.erroneous_data_value
FROM pa_error pe,
pa_error_detail ped,
pa_request_procedure_run_error prpre
WHERE pe.pa_error_sid = ped.pa_error_sid
AND ped.pa_error_sid = prpre.pa_error_sid
AND ped.oprtnl_flag = 'A'
AND prpre.oprtnl_flag = 'A'
AND prpre.pa_rqst_prcdr_sid = prp.pa_rqst_prcdr_sid
AND pe.pa_error_nmbr = '5029'
AND ped.aaa_segment_loop_nmbr = '2000F') mdfr3_code,
(SELECT prpre.erroneous_data_value
FROM pa_error pe,
pa_error_detail ped,
pa_request_procedure_run_error prpre
WHERE pe.pa_error_sid = ped.pa_error_sid
AND ped.pa_error_sid = prpre.pa_error_sid
AND ped.oprtnl_flag = 'A'
AND prpre.oprtnl_flag = 'A'
AND prpre.pa_rqst_prcdr_sid = prp.pa_rqst_prcdr_sid
AND pe.pa_error_nmbr = '5030'
AND ped.aaa_segment_loop_nmbr = '2000F') mdfr4_code,
(SELECT prpre.erroneous_data_value
FROM pa_error pe,
pa_error_detail ped,
pa_request_procedure_run_error prpre
WHERE pe.pa_error_sid = ped.pa_error_sid
AND ped.pa_error_sid = prpre.pa_error_sid
AND ped.oprtnl_flag = 'A'
AND prpre.oprtnl_flag = 'A'
AND prpre.pa_rqst_prcdr_sid = prp.pa_rqst_prcdr_sid
AND pe.pa_error_nmbr = '5014'
AND ped.aaa_segment_loop_nmbr = '2000F') rqst_prcdr_amt,
(SELECT prpre.erroneous_data_value
FROM pa_error pe,
pa_error_detail ped,
pa_request_procedure_run_error prpre
WHERE pe.pa_error_sid = ped.pa_error_sid
AND ped.pa_error_sid = prpre.pa_error_sid
AND ped.oprtnl_flag = 'A'
AND prpre.oprtnl_flag = 'A'
AND prpre.pa_rqst_prcdr_sid = prp.pa_rqst_prcdr_sid
AND pe.pa_error_nmbr = '5015'
AND ped.aaa_segment_loop_nmbr = '2000F') srvc_line_rate,
'NA' drug_desc, 'NA' product_service_id, 'NA' uom_code,
'NA' rqst_prcdr_units
FROM pa_transaction_request ptr,
input_acknwldgmnt ia,
input_batch_file ibf,
pa_request pr,
pa_request_service prs,
pa_request_procedure prp
WHERE ptr.input_acknwldgmnt_sid = ia.input_acknwldgmnt_sid
AND ia.input_batch_file_sid = ibf.input_batch_file_sid
AND ptr.pa_trnsctn_rqst_sid = pr.pa_trnsctn_rqst_sid
AND pr.pa_rqst_sid = prs.pa_rqst_sid
AND prs.pa_rqst_srvc_sid = prp.pa_rqst_srvc_sid
AND pr.oprtnl_flag = 'A'
AND prs.oprtnl_flag = 'A'
AND ptr.oprtnl_flag = 'A'
AND prp.oprtnl_flag = 'A'
AND prs.rqst_ctgry_lkpcd = 'AR'
AND ibf.original_file_name = 'HIPAA.165760000.20110613I001.278_IRej.dat';
Thanks,
P Prakash

Hi,
Maybe like that, but keep in mind that it is highly untested_ :SELECT
prs.pa_rqst_srvc_sid,
pvt.c5031 revenue_iid,
pvt.c5013 x12_code_list_qlfr_lkpcd,
pvt.c5026 procedure_iid,
pvt.c5027 mdfr_code,
pvt.c5028 mdfr2_code,
pvt.c5029 mdfr3_code,
pvt.c5030 mdfr4_code,
pvt.c5014 rqst_prcdr_amt,
pvt.c5015 srvc_line_rate,
srvc_line_rate,
'NA' drug_desc,
'NA' product_service_id,
'NA' uom_code,
'NA' rqst_prcdr_units
FROM
pa_transaction_request ptr,
input_acknwldgmnt ia,
input_batch_file ibf,
pa_request pr,
pa_request_service prs,
pa_request_procedure prp,
    SELECT
      prpre.pa_rqst_prcdr_sid,
      MAX(DECODE(pa_error_nmbr,'5013',prpre.erroneous_data_value,NULL)) c5013,
      MAX(DECODE(pa_error_nmbr,'5014',prpre.erroneous_data_value,NULL)) c5014,
      MAX(DECODE(pa_error_nmbr,'5015',prpre.erroneous_data_value,NULL)) c5015,
      MAX(DECODE(pa_error_nmbr,'5026',prpre.erroneous_data_value,NULL)) c5026,
      MAX(DECODE(pa_error_nmbr,'5027',prpre.erroneous_data_value,NULL)) c5027,
      MAX(DECODE(pa_error_nmbr,'5028',prpre.erroneous_data_value,NULL)) c5028,
      MAX(DECODE(pa_error_nmbr,'5029',prpre.erroneous_data_value,NULL)) c5029,
      MAX(DECODE(pa_error_nmbr,'5030',prpre.erroneous_data_value,NULL)) c5030,
      MAX(DECODE(pa_error_nmbr,'5031',prpre.erroneous_data_value,NULL)) c5031
    FROM
      pa_error pe,
      pa_error_detail ped,
      pa_request_procedure_run_error prpre
    WHERE
      pe.pa_error_sid     = ped.pa_error_sid
    AND ped.pa_error_sid = prpre.pa_error_sid
    AND ped.oprtnl_flag   = 'A'
    AND prpre.oprtnl_flag = 'A'
    AND pe.pa_error_nmbr IN ('5013','5014','5015','5026','5027','5028','5029',
      '5030','5031')
    AND ped.aaa_segment_loop_nmbr = '2000F'
    GROUP BY
      prpre.pa_rqst_prcdr_sid
pvt
WHERE
pvt.pa_rqst_prcdr_sid       = prp.pa_rqst_prcdr_sid
AND ptr.input_acknwldgmnt_sid = ia.input_acknwldgmnt_sid
AND ia.input_batch_file_sid   = ibf.input_batch_file_sid
AND ptr.pa_trnsctn_rqst_sid   = pr.pa_trnsctn_rqst_sid
AND pr.pa_rqst_sid            = prs.pa_rqst_sid
AND prs.pa_rqst_srvc_sid      = prp.pa_rqst_srvc_sid
AND pr.oprtnl_flag            = 'A'
AND prs.oprtnl_flag           = 'A'
AND ptr.oprtnl_flag           = 'A'
AND prp.oprtnl_flag           = 'A'
AND prs.rqst_ctgry_lkpcd      = 'AR'
AND ibf.original_file_name    = 'HIPAA.165760000.20110613I001.278_IRej.dat';Edited by: Nicosa on Jul 12, 2011 2:20 PM
Corrected columns aliases in outer query :
- c5031 instead of 5031
- c5013 instead of 5013

[svn] 3672: Removing the commonly used getUnqualifiedClassName out of the less commonly used utility class to reduce SWF size for the general case .

Revision: 3672
Author: [email protected]
Date: 2008-10-15 16:54:51 -0700 (Wed, 15 Oct 2008)
Log Message:
Removing the commonly used getUnqualifiedClassName out of the less commonly used utility class to reduce SWF size for the general case.
Reviewer: Gordon
QE: No
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/graphics/graphicsClasses/TextGraphicEleme nt.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/core/UIComponent.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/core/UITextField.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/Effect.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/effects/EffectInstance.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/SystemManager.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/utils/NameUtil.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/utils/ObjectUtil.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/utils/OrderedObject.as

In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt

How to find the size of the master data objects in the BW system?

Hi,
We would like to understand the size of the master data tables overall for a specific source system (Logical name is Ex.ABCD, which supplies all master data to BW). Can you please advise the procedure to find out this?
Is there any table that will allows to see all the master data objects related to specific sources system so that we can find out that table size? Thanks.
For example, we have many Texts, Hier & Attributes.
0COUNTRY_TEXT
0REGION_TEXT
0PERSON_ATTR
0MATERIAL_LPRH_HIER
Advance Thanks.
Edited by: BW USA on Feb 2, 2010 10:52 AM

Hi,
You can find out all the master data tales used in the BW system by
Tcode : SE11
Enter as /BIC/P* for master data tables and press F4 which gives list of master data tables currently used in BW system.
Similarly for Texts /BIC/T* and press F4
Similarly for Hierarchies /BIC/H-* press F4
and can know the size of the all tables.
Thanks,
Gopal

I am shooting with a Nikon D60 on Fine Format and unable to print larger than 11x14. I have been able to print larger pictures. I am told iPhoto reduces the size of the file when uploaded. Is this true? If so how can I change this? I need 16x20's

I am shooting with a Nikon D60 on Fine Format and unable to print larger than 11x14. I have been able to print larger pictures. I am told iPhoto reduces the size of the file when uploaded. Is this true? If so how can I change this? I need 16x20's

I am shooting with a Nikon D60 on Fine Format and unable to print larger than 11x14. I have been able to print larger pictures. I am told iPhoto reduces the size of the file when uploaded. Is this true? If so how can I change this? I need 16x20's

HI, I need your help. How can I delete all data, when I do not have the special security code, which I didn´t remember ? I also think, that I never create this code before. But I cannot put my settings back.

HI, I need your help. How can I delete all data, when I do not have the special security code, which I didn´t remember ? I also think, that I never create this code before. But I cannot put my settings back.

You must remember the code, if you can't then take the phone and proof of purchase to an Apple Store.

DeserializeJSON - is there a limit on the size of the JSON data that can be converted?

I have some valid JSON data that's being converted successfully by DeserializeJSON... until it gets to a certain size, or that's certainly what appears to be happening. The breaking point seems to be somewhere in the neighborhood of 35,000 characters... about 35KB. When the conversion fails, it fails with a "JSON parsing failure: Unexpected end of JSON string" message. And when the conversion fails, the JSON data is deemed to be valid per tools like this one: http://www.freeformatter.com/json-validator.html.
So, is there a limit on the size of the JSON data that can be converted by DeserializeJSON?
Thanks!

Thanks Carl.
The JSON is being submitted in its entirety, confirmed by Fiddler. And it's actually being successfully saved to a SQL Server nvarchar(MAX) field too. I can validate that saved JSON.
I'm actually grabbing the JSON to convert directly from the SQL Server, and your comments / thoughts led me down the path of resolution.
Turns out that the JSON was being truncated prior to getting to the DeserializeJSON command, but it was the cfquery pull that was doing the truncating. The fix was to enable "long text retrieval (CLOB)" for this datasource in CF Admin. I'd never run into that before or even knew that this setting existed.
Thanks again for your comments!

I have an imac 27 inch O SX 10.6.8. using iphoto 11 Version 9.1.5. I have scanned some photos at very high resolution with each photo being about 45MB. They're saved to desktop. How can I reduce the size of the scanned photo's they are crashing iphoto

I have an imac 27 inch O SX 10.6.8. using iphoto 11 Version 9.1.5. I have scanned some photos at very high resolution with each photo being about 45MB. They're saved to desktop. How can I reduce the size of the scanned photo's they are crashing iphoto.

What format are they? Tiif? Jpeg? You can compress them with a lot of apps - including Preivew and just about any graphics editor out there. I'm not sure that 45mb would crash iPhoto thogh, are yo sure that's the cause? I know that some folks have mentioned pixel dimensions causing issues, as can color profiles.
Regards
TD

Why is Data Size in QT inspector twice the size of the file?

I am not asking this to save space. I am just curious. When playing a dv (captured from camera) clip, I notice that the QT inspector shows data size about twice the size of the dv clip size in file system. Is it because the dv is compressed and QT decompresses?
Actually, on clip in QT shows 22GB which is impossible to fit on a miniDV tape.

You'll notice that a DV Stream file has two tracks (audio and video) of the same size when viewed in QuickTime Movie Inspector or the Movie Properties window of QuickTime Player Pro.
Obviously the audio track shouldn't be the same size as the video track. There are separated from the single stream to allow editing.

In putting together a book I can move photos onto a page and enlarge the picture but is there a way to reduce the picture size? some cases I want a smaller picture and if I change the size of the picture box I only get a portion of the image. I wnt to red

picture size...in putting together a book I can move photos onto a page and enlarge the picture but is there a way to reduce the picture size? some cases I want a smaller picture and if I change the size of the picture box I only get a portion of the image. I want to reduce the image to fit the size of the box.

If you right click on the image on the page in the context menu select photo box alignment and then select one of scale to fit {centered, Left-aligned, Right-aligned}
That should do what you are loking for.

How do i reduce the size of the pdf's scanned from my printer

i scan from my printer to a pdf. the file comes across way to big (2mb for 4 pages with no pictures & just text, etc.) i have already re-set the settings on my scanner / printer to try to get the smallest dpi & image possible. how do i get to the settings on my adobe acrobat to reduce the size of the pdf when saved on my computer or is this not the right place to do that?

m spires wrote:
i have already re-set the settings on my scanner / printer to try to get the smallest dpi & image possible.
You may need to reset that to use higher scan quality for successful OCR.

Deletion of data to reduce the size of the SAP instance

Similar Messages

Maybe you are looking for