Deletion of Info cube request

Hi Experts,
Currently I am working on BI 7.0.
Here is the scenario, Actually I want a such setting so I can delete the previous Info Cube request while scheduling info package for new request.
Actually in 3.0 we had this functionality in Info package "Automatica loading of similar/ Identical request from the Info cube" where we can select the radio button to delete the previous request from Info Cube.
Do we this type of functiobality in BI 7.0?
Regards
Sujay

Hi Sujay,
Netweaver 7.0 does not support the feature you are talking about, it is possible only in 3.x.
You could however incorporate this step 'Delete Overlapping Request' using a process chain. Thats what I do, I too had an issue on this earlier.
Regards,
Manu

Similar Messages

  • Selective deletion in info cube

    is there any option to do selective deletion in info cube.
    i need step by step detail.
    thanks
    ks

    Yes indeed there is step to delete selectively in Cube.
    http://help.sap.com/saphelp_nw70/helpdata/en/d4/aa6437469e4f0ae10000009b38f8cf/frameset.htm
    Its in Manage cube- Content tab- deletion
    Thanks

  • Selective deletion on info cube taking long time.

    We have a cube with line item dimension and partioned on Fiscal year. When we are doing selective deletions on the cube on 0fiscper (removing the old redundant data) it is taking quite long time (approx 10 hours) to do this selective deletions as there is huge data in the E fact table ,Request older than 4 days are compressed in the cube and it has some millions of records in this table.
    Is there any way we can improve the performance of this selective deletion? Any improvements suggestions we are on sap BW 3.5 system.

    Hi,
    The issue is very specific .
    I recommend to check if there are defined matching indexes which fit to the where clauses of the delete statements. This will make the access to the record most effient.
    All other indexes need to be just deleted for the time-being and re-created after the clean is completed. This will save the time for updating the indexes.
    The deletes should be performed in bulks - i.e. many, e.g. 25, 100, more at once. If deletes sqls are send from ABAP to database one by one there is huge overhead in the network traffic time.
    Best Regards,
    Sylvia

  • Checking Info Cube request data

    Hi gurus,
    Let's say I have I needed to look what data the DTP request brought up to the Cube.
    How would/through what navigation steps I shoud see for analysis data in one particular request.
    Thanks for your comments.
    Eddy.

    Try this ....
    right click on your cube and select manage .....
    under request tab copy the required request number ...
    select display data from the context menu of the cube and enter the request number (under data package dimension) and execute .

  • Delete cube request - before or after index creation?

    Hi Folks,
    a quick question. I plan to delete for one cube requests that are older than 3 days (cube only hosts short term reporting). Now I wonder if this should be done aftter the new load but before the index is created or after the index is created.
    I guess it is after the index is created otherwise it would take longer to find the requests that should be deleted. The index will be slighly degenerated due to the deletion but should be only marginal.
    I am right or wrong?
    Thanks for all replies in advance,
    Axel

    hi,
    a quick question. I plan to delete for one cube requests that are older than 3 days (cube only hosts short term reporting). Now I wonder if this should be done aftter the new load but before the index is created or after the index is created.
    The delete should be done before index creation, as once the index are created then even though the data corresponding to those index is deleted the index still remains. This unnecessarily increases the index table size
    regards,
    Arvind.

  • How to delete the compressed Request ID in the info cube... ?

    Hi BW Gurus,
    one of the info package will upload the request in to three data targets and failed due to error with duplicate records.  I am able to delete the bad request in two data targets and facing problem with one data target due to the request is available in green and got compressed. 
    The reasons why i am unable to delete the request in that data target is it is already got compressed and rolledup.
    I tried with selective deletion based on same request ID  i have done that successfully but the request still presents in the data target.  I have checked in listcube and found no data for the request id.
    now i have one more question like the request has bring down to status not ok in the monitor and done selective deletion will it be a problem on the data missing please advise me if any data missing will occur for the particular data target.
    can any one help on this. Thanks in Advance.
    Venkat.

    Hi Venkat
    You have one way to delete the compressed request
    But this is possible only if u have the request in PSA
    If the request is in PSA, do reverse posting
    This will nullify the particular bad request by changing the press sign into - and - sign into + for all the records went in the cube for that particular request
    Regards
    N Ganesh

  • Deleting the latest request from info cube.

    Hi All,
    In our project, we have data from May 2012 to till date. Data is freezed and there is no change of data till May 2014. And there is change in data for current month only ie) June 2014. So i have pulled the full load from May 2012 to May 2014 and loaded in the Info cube.
    I am deleting the current month data and loading only the current month data to Info Cube. So i want to delete the current request in the info cube before loading and load only the current month data.
    Can you pls guide me how to achieve this through Process chain. I am unable to identify which process type will suit my requirement.
    Thanks.

    Hello Vincent,
    As mentioned by you, that there is no change in data from May 2012 to May 2014, you can keep the request which contains this data(for Example Req1). If Request2 contains data from May 2012 to June 2014 then you need to delete this request i.e Req2 and load only data for June 2014. Later you can follow below mentioned process.
    Now coming to option which you are looking for process type to achieve this via process chain, there is a process variant called "Delete Overlapping Request", which is used to delete data from the target based on certain condition depending requirement.
    Hope this resolves your issue. Below document explains steps to achieve the same.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0431c48-5ba4-2c10-eab6-fc91a5fc2719?quicklink=index&…
    Best Regards,
    Venu Gopal K

  • Function Module to delete all the red requests in Info Cube

    Dear Friends,
    Is there any standard FM which can delete all the red requests in the infocube ?
    Thanks & Regards,
    Ashutosh Singh

    you can use RSDD_INFO_REQUID_DELETE.
    you've got to create a program in which you first read table rsbkrequest (where you can find the status of the request)
    then you can use these id's in the function module.
    as a lead check this paper (other objective but same principle)
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a7ba9523-0b01-0010-18ab-cf8b3b8c374a?quicklink=index&overridelayout=true
    M.

  • I am trying to delete the data from the info cube.

    Hi All,
               i am trying to delete the data from the info cube.in cube reporting symbol is availble.when i click on delete button delete symbol is coming again when i click on refresh button request is not deleting .please give me solution .
    Thanks,
    chandu

    Hi,
    Also try to delete in Data Mart Status.
    R u deleting particular request or the entire data in cube, if entire data then right click on Cube select Delete Data, it entirely deletes Data.
    Hope it helps you...Let us know if you still have any issues.
    Reg
    Pra

  • Unable to see the request in Reconstruction Tab of Info Cube

    Hi Experts,
    We are scm 5.1 version.
    Actually I have created extraction process to extract data from Demand Planning area. I have extracted data from planning area also. I can see the request in to PSA as well as Info Cube but I am not able to see the request in reconstruction tab.
    Is there any setting to see the request in to Reconstruction tab of the info cube?
    Please advise..
    Regards
    Sujay

    Hi rathy,
    Is there any way to support the equivalent of reconstructions with the new BW 7.0 design?
    I will explian in detail..
    Reconstruction is critical functionality for our current DP solutions, it allows us to "reconstruct" old requests from the backup InfoCube (based on what's been kept in the PSA) and use this to restore data in the planning area to a day in the past.  It is used whenever there is a technical or user error than needs to be un-done.  I believe there is a way to accomplish with the BW 7.0 design.
    Please suggest...
    Thanks in advance..
    Regards
    Sujay

  • Delete Overlapping Reqeust in DTP deletes more than one request from cube

    Hi all,
    I have selected the following options in delete overlapping request as we need only one request in the cube.
    Delete existing requests
    Only delete request frm same same DTP
    Selections are
    Same or More comprehensive
    Scenario is:
    DSO>DTP>Cube
    I have set this delete overlapping request in the DTP (in a processchain).
    Now at the time i added this step in Process chain, there were two requests in the Cube (both with the same DTP but first one was 2009 data and second was 2010 data)
    Need was to delete only the latest request from the cube ie 2010 data.
    As per my understanding, i assumed delete overlapping will delete only ONE request i.e. the latest one from the cube with 2010 data.  But when i ran processchain, it deleted both the requests.
    Is that the functionality or is there something I am missing? We need to retain 2009 data and overwrite 2010 data with the new request.
    Suggestions please.

    Hi,
    I suspect that you have not set any DTP filter criteria. Is this the case?
    Are these requests delta DTPs or full DTPs?
    Have you read/applied these notes:
    1155723 P18:DTP:PC: Deleting overlapping DTP requests in PC
    1318438 P21:DTP:PC: Change of instance when DTP in PC repaired
    1147766 P18:PC:DTP:Select only full DTPs for overlapping deletion
    1336410 70SP22: Enhancements to CL_RSBK_DTP=>GET_ALL_BY_PROPERTY
    Rgds,
    Colum

  • Steps involved in Selective Deletion of Data from Info Cube

    Please search...this is much discussed in different threads out here
    Hi Experts
    I shall be greatful if you can updated me with the detail steps involved in Selective Data Deletion from a Info Cube....as i need to delete data selectively from a Infocube in LIVE system...so there is no second chance for me..
    Please update in detail
    Thanks in advance
    Edited by: Moderator

    Not sure how you were searching, but did you come across any of these...
    https://forums.sdn.sap.com/search.jspa?threadID=&q=selective+deletion&objID=f131&dateRange=all&numResults=15

  • Info cube data deletion fact only

    When we want to delete the data in the info cube, we get an option dialog box to choose
    Do you want to delete only the contents of the fact table
    in InfoCube IC_SDGR1 or do you
    want to delete the dimension tables as well?
    1)fact table only
    2)fact table and dimension table.
    Could anyone tell me when we use only fact table , is anyone encountered with this scenario.
    Because generally we use fact table and dimensional table option for deletion.
    Thanks for the replies

    as long as you haven't changed anything to the dimension you can leave the data in the dimension tables when deleting.Your reload will go a lot faster as less (or none) entries are to be created. on the other hand if you have made a change to your cube and you transport to production and you need to reload, then you need to delete the entries in the dimension table, as you have a new key in the structures and all old entries are useless...
    M.

  • I have a purchases App in my account that I need to delete. ITunes is requesting billing info to complete the transaction. I have changed my mind and don't what to purchase the app. How do I delete the purchases App?

    I have a purchases App in my account that I need to delete. ITunes is requesting billing info to complete the transaction. I have changed my mind and don’t what to purchase the app. How do I delete the purchases App?

    There is nothing that you can do to get rid of the balance on your own. Contact iTunes Store Support and seek their assistance. I believe that they can reset your balance for you.
    https://expresslane.apple.com/Issues.action

  • Request yellow when no data for one Info cube.

    Hi all,
    We have been doing delta load from 0FiAR_o06 to cube 0FIAR_C02 , but since a couple of days we have been getting request status yellow in the info cube when no data .. I have checke the settings in infopackage , it is the same for other info cubes in which the request gets green automatically when no data . This problem exists for this cube only.
    I have done RSRV and fact table recreate also but no luck so far ..
    Please help as it is pruduction issue..
    Regards,
    Akash..

    Hi
    Only the Requests that doesnot have data is updated with Yellow Request right, means the whenever the yellow request it could not pull the data.
    You need to recheck the Table Space / Back Ground memory / and Short dump.
    Try to analyse the Yellow request at Job Process / SM37
    Try to raise a Ticket with BASIS Guys for system refresh.
    Hope it helps and clear

Maybe you are looking for