Deletion of inspection results

Hi Gurus,
While doing result recording once i enter result for a characteristics, the system is not allowing me to delete the results recorded for characteristics.System gives warning message You can not delete the entry here and records the previously entered results automatically.Is there any way so that once i record and save result and if i want to delete the result of one of the mic, i can delete it.
Regards
Amit

Hi Amit
It is only possible to chage/Add/Edit a char... if You select the MIC as a "long term inspection".
For this in control indicator you must select it as a "long term char".
This will allow you to delete the result recorded as wel as chnge the result recoreded in long term.
Also for the existing char/MIC (with status 5 )you can "Put in process" that is Unlock the cahrectoristic.
Here observe the status as will become "2:Processed"
FYI
0     Can be processed
1     Must be processed
2     Processed
3     Valuated
4     Skip
5     Processing is completed
6     Transfer Characteristic to Subsystem
7     Fixed (cannot be processed)
9     Blocked for evaluations
A     Rqd char.when controlling char.accepted
B     Rqd.char.when controlling char.rejected
I hope this will help
Edited by: SujitSND on Mar 15, 2009 12:35 PM

Similar Messages

QM inspection result reports

Experts,
How come there is never any data for QM reports such as MCXA, MCXB, MCXD, MCXI although inspection lots are available in the system?
Is there another report that I can use to see inspection results in a table layout, e.g. list of batches on one axis, list of characteristics on another and the results?
Thanks!
Rgds

Sure you can. Simply add some of the standard characteristics to the batch class that SAP provides.
LOBM_APO_SL_MAX     Max shelf life/maturity in sec
LOBM_APO_SL_MIN     Min shelf life/maturity in sec
LOBM_APO_SL_UTC     Reference time stamp of batch
LOBM_BPRIO     Stock determination: priority
LOBM_BWTAR     Valuation type
LOBM_HERKL     Country of Origin
LOBM_HSDAT     Date when batch was produced
LOBM_KRT     waiting period of a batch
LOBM_LFDAT     Batch determin. delivery date
LOBM_LGORT     Storage location
LOBM_LVORM     Deletion ind. for batches
LOBM_MBDAT     Material availability date
LOBM_MENGE     Batch determination sort qty
LOBM_QNDAT     Next insp. date for batch
LOBM_QSCORE     Qualityscore Usage Decision
LOBM_RLZ     Remaining shelf life for batch
LOBM_RLZ_PROZ     Req. remaining rntme in proc.
LOBM_UDCODE     Usage Decision
LOBM_VERAB     Availability date
LOBM_VFDAT     Expiration date, shelf life
LOBM_ZUSTD     Status of batch
Not all of these are suitable to add to the batch class. Some are designed strictly for batch search strategy classes. There are several OSS notes out there on the use of these. As you can see, several of these are date related. I usually always add LOBM_HSDAT, LOBM_UDCODE,and LOBM_VFDAT.
As you can see, the Batch number is not in the list of standard characteristics. This can be created however. Create a general characteristic with reference to table MCH1, field nanme CHARG and add this characteristic to your classes. You can then use it to search and sort for specific batches just like any other characeristic in CL30n. When displayed, the field is greyed out from user entry since it is a referenced field.
Craig

How to block deletion of Inspection Plan

Dear Experts
Accicendatally, our users are deleting the Inspection Plan,
Is there any authorisation object to make Restriction on this,Transaction is QP02.
Regards
Sandeep patil

Hi Sandeep,
As you said User's are deleting inspection plans. They must be putting it for deletions by clicking on deletion flags.
If you want to restrict this then you have to get help of security team. They will find role for this transaction -
> then they will find out the objects matanined in this role -
> this will display all the activities in that object -
> then they can cancel deletion activity from object list.
Then when User will access QP02 then this checkbox will appear grey. Then they will not be able to delete inspection plan.
Hope this resolves your issue, reward points if helpful.
Regards,
Avinash.

Copy Inspection Results of one lot to other lots at a time

Dear Experts,
As per settings made under "Make Settings for Copy of Inspection Results" I am able to copy inspection results but still I am not getting what I exactly want. Below are different requirements explained in details
1. I am not able to copy twice on the same lot. e.g. if a lot has status RREC i.e. RR has been done then if at a later time I want to copy some other results over here then it's not happening.
In help.sap page somewhere it is mentioned that copy is possible if lot has status CALC. I want to have some configuration which I don't know for which SAP should allow the copy functionality with status RREC also.
2. By above functionality I want to do RR for several lots collectively at a time. E.g. if I have 100 lots then with same quality results it's tedious to copy results for each one by one. Like "QA16 - Collective Usage Decision" I didn't find any similar transaction for results recording(collectively).
3. Although my results are being copied from one lot another but MIC valuation are not being transferred given that I am not using any sampling procedure. I want manual valuation to be copied to the destination lots.
Any valuable suggestion will be highly appreciated.
Regards,

Dear,
it is not clear from your question.
Please get more details,
In which release you are working?
In SPRO what special setting you made for this special case
Inspection origin is linked with no range/TL type/insp type.
Wher exactly you set this new configuration.
Please let us know so that we can simulate and help you out

Delete every payroll results in the system

Hi experts,
There is a special Test system where External useres can login to the system, so we'd like to delete every paroll results in the system.
My question is how can I do that * correctly & efficiently*?
I know that there is a report for that: "RPUDEL20" but imagine a company with 14.000 employees. So using the logical databse, and deleteing the paroll results ony-by-one, will took more than a day
My idea is to delete every record in the tables:
HRPY_RGDIR
HRPY_WPBP
HRPY_GROUPING
P01O_ZVB_RR
This is definetelly the fastest way, but is a good solution?
I mean what about the 0003 infotype (payroll status) and other relations to the payroll results? What will happen if I delete the tables?
There is no payroll testing in this system, we're using this system for ESS testing, so the payroll results are not relevant, but all other masterdata (PA and PD infotypes) are relevant.
I'm happy to hear any idea
Bye
N.

Hi everyone,
Thank you for the answers, but I don't understand how can the LSMW help me. As I know the LSMW is a data migration tool. I don't want to import anything to the sap system, I just want to delete the existing payroll results. How does the LSMW help me in this?
Thanks
N.

Inspection results copying

Hi All,
In result recording inspection results can be copied to the actual inspection lot from an existing lot. Is this possible, if so where we have to this customizing.
Navin

Hi,
Pl go thro the forum post and doc link below
Re: Copy Inspection Results
http://help.sap.com/saphelp_47x200/helpdata/en/00/07cf2ec3b42046aeeb527773165efc/content.htm
Regards
K.M.Arun

Inspection results for more than one lot

How do i see inspection results for different lots of the same material together in a single screen. Is there any standard report or query available in SAP?
Prahlad

Dear Prahlad
You can see it in ways
1) Go to QS28. Input the plant and the mic and execute. You will get MIC details. Choose the MIC and click on Result history. A pop will appear Result history Limit Selection. In the Time Tab you can see inspection lot selection date From and To. Execute you will get the entire list of lots
3) Go to QA33 > result> Select the Mic> go Result historyhistory >In the Time Tab you can see inspection lot selection date From and To. Execute you will get the entire list of lots with all values and charts
4) standard reports such MCXD,QGP1 can be used
Hope this helps
Regards
gajesh

Inspection Results Listing

Hi Experts,
After inspection results being inputted, is there any standard TCODE in SAP which can list out the inspection results in detail (1 by 1)?
And also any program for listing what results required to be inputted but not yet inputted?
Thanks a lot!
Regards,
Daniel

Have you tried
MCXV
1
apart from QA32/QA33
Edited by: nbgore on Mar 31, 2011 2:14 PM

Inspection result to multiple batches

Hello,
For my client, I need to figure out a way to get the inspection results from QM into multiple batches. Is there a simple (standard) way to do this?
The situation is that my client produces 3 batches at once. Samples for analysis are only taken from 1 of those 3 batches. After the analyses, at the usage decision, the values need to be copied into the characteristics of all 3 batches.
Anyone can help me out with this one?

Hi,
That means you have only one inspection lot(manually created) for the production of 3 batches. But you can link only one material/one batch to an inspection lot in SAP. In your case, you can record the results for 1 batch and maintain the other batches in text field(that Inspection not required for other 2 batches).
By the way which inspectin type are you using?
WR,
Sanjeev

Copying Inspection results from inspection lot.

Dear All,
Please explain me the process of copying inspection results in QM. Following is my clients requirement:
During receiving inspection they receive the same material in say 10 batches (coils). They want to create the independent batch for each coils of same material for tracking mechanism, so I don't have any option to generate that many number of lots.
Out of this 10 lots, say there are 2 masters (mother coils). Means there are two set of characteristics only which i need to copy for 5 lots each.
As I learn from SDN, EA - PLM need to be activated . But I don't know what are the adverse effects of activating same.
Please explain me the process.
Best Regards.
Shekhar Mokashi

Hi Shekhar,
Refer the OSS note 855959 - Activation of Extension Sets via SPRO not successful.
I think all your doubts regarding to this Enhancement package will get resolved.
The big warning is given there in that note itself about implementing the EA-PLM enhancement is.....
Once an Enterprise extension set has been activated, it cannot be de-activated by de-selecting the option in the SPRO or otherwise, because BC Set activations cannot be undone.
Appart from that note refer the document for
Release Notes
SAP ERP Corporate Services
SAP enhancement package 2 for SAP ERP 6.01.
the link for the same is pasted here FYI.
[Chap_04_RNCorporateService|http://www.id.uzh.ch/dl/sw/sap/upgrade/Chap_04_RNCorporateService.pdf]
Even after this much stuff completion, you don't have your doubt cleared up then I would advice you to ask the question in [ SAP Enhancement Packages|/community [original link is broken]; forum.
Regards with lots of good luck wishes.
Shyamal.
Edited by: Shyamal Joshi on Jul 26, 2008 12:19 PM
Edited by: Shyamal Joshi on Jul 26, 2008 3:06 PM

Copy inspection results

Hi,
In QM i am trying to copy inspection results. For that all required customizations maintained, but still
copy inspection results option is not coming in EDIT tab of QE01 transaction.
I have cheked the pf status for the same it is E110 and main program is SAPLQEEM and in se41 under edit tab i am able to see the data transfer push code also +QECOPY, but it is not appearing at transaction level.
Do i need to do any coding to activate the same. Any help will be highly appreciated.
Thanks a lot in advance.

Hi,
Are you able to see "copy insp results" in QA02 under Edit menu ?
Ref the link for details reg copy insp results
http://help.sap.com/saphelp_47x200/helpdata/en/00/07cf2ec3b42046aeeb527773165efc/content.htm
Regards
K.M.Arun
Edited by: ARUN KM on Mar 24, 2008 4:22 PM

SAP QM Result recording - Copy inspection results functionality

Dear all,
I have two queries.
1) The Raw materials used in various plants are same. I want to copy the inspection results to the inspection lot if the batch is already accepted in other plant. The material, batch and vendor is common point. Some of the characteristics are caluculated characteristics. How to map this requirement.
2) I want to test the standard functionality for copy results but in my system, the settings for copy inspection results is not appearing in quality inspections in SPRO. I want to confirm whether I am missing some other setting.
Regards,
Manohar

Hello Jessica,
you could try the following bapis:
BAPI_INSPCHAR_GETRESULT
BAPI_INSPCHAR_SETRESULT
Although the desired functionality was actually implemented in higher releases.
Hope this helps you.
Regards,
Isabelle

QM: Copying inspection results to another lot

Experts,
has anyone experience with automatic copying closed inspection results from one inspection lot to another one?
Rgds

Having seen some of your other postings and queries I'm wondering if your issue can't be solved by batch derivation or batch characteristic inheritance? These are available in 6.0. Not sure of your version. By using these functions, you can avoid creating a lot of your inspection lots possibly.
You can read up on these at:
Batch derivation: http://help.sap.com/erp2005_ehp_03/helpdata/EN/35/7b723c4356d068e10000000a114084/frameset.htm
Batch characteristic inheritance: http://help.sap.com/erp2005_ehp_03/helpdata/EN/3e/a6d5b1a3f5764e8274e015d5a1cee2/frameset.htm
Craig

QM Inspection results transfered back to batch

Experts,
after taking a usage decision, I want all inspection results to be transfered back to the batch.
But if a result is out of spec, it gets a negative valuation, then I get the warning 'batch could only be partially valuated' and the result of this char is not writte back to the batch.
How can I have also the negative results recorded in the batch?
Thx

In the batch level make sure that any value you are giving will be accepted.
master data required
Batch and batcth charectristics
MIC- copay from batch charectristics
Material specification with same MIC's.
Quality plan with same MIC's.
In the batch charectistics make sure that the range is more tahn that in MIC so that any value is taken or in batch chereristics -check box - aditional value allowed in value tab page is active.
With this setting you should be in the position to get the results

Report for Inspection Results

Hi experts,
Is there any standard TCODE which can list out all the inspection results by material?
Any activation required?
Regards,
Daniel

Hi,
QGP1 is too discrete because I need to input the characteristics one by one.
MCXB have no results displayed.
MCXD have no results displayed.
I need SAP provide a list of inspection lots, plus defect informaiton within a time period (like by month).
Regards,
Daniel

Deletion of inspection results

Similar Messages

Maybe you are looking for