Deletion of order operations after releasing them

Why is it still possible to delete order operations within an order after releasing (system status = REL) them.
How can I avoid that those operations / activities can not be changed?
Thanks in advance.
Best regards,
Dennis

Dennis,
On a prevois project we had to use a user-exit at save to prevent deletion of operations unless you were authorised. We used IWO10009 (at save) for this purpose.
I don't think is can be done via user-statuses??? I'm sure we must have checked at the time...
PeteA
[www.pjas.com]

Similar Messages

Purchase order changes after release

Hi,
How can I block a purchase order to any changes after release it and then, in case of need, mark for deletion the purchase order itens?
Regards,
Maria

Hi,
To block any changes in the purchase order to after release, set Changeability indicator as 1 for Release ID "R" in following path & save.:
SPRO ->MM - Purchasing -> PO -> Rlease Procedure for PO -> Define Release for PO -> Release Indicator
NOTE:If you set Changeability indicator as 3, PO can be changed after release and trigger a new release strategy based on value changes.
Regards,
Biju K

Cannot see transported items in Queue, even after releasing them.

I cannot see transported items in Queue, even after releasing them. When Iam in transaction: SE09, I am able to see all the released objects, and the check marks next to each one which looks good...Where are these files? Under usr/sap/trans, they show up under logs with nothing in them except log data...Not in Cofiles & datafiles either.
Any input would be greatly appreciated.
Alan

Hello Jazz!
Our developer released them, and I will get more details from him. We can see them when in SE09/10. Just cannot see them in the import queue? Also can't find the files under: usr/sap/trans, except the logs???
We just want to find these files, and either zip them up, or put them on a CD for later use, and this project will wind down soon.
Any other suggestions on how we can find these files, as all exports normally show up in usr/sap/trans/data, and cofiles...but not in this case???.
Thanks Again,
Alan

How to delete production orders that have release status set in APO ?

I have a few production orders which have a release status set in SCM 5.0 system. I need to delete them now. I cannot delete them from ECC since the ECC system no longer exists.
I need to delete these orders in APO only ? Is there any way to do this ?
Thanks in advance for your help!!
Ranjini.

Please try deleting with either of the reports /SAPAPO/OM_DELETE_INCON_ORDERS or/SAPAPO/DELETE_PP_ORDER

FM or BAPI to Modify or Delete Process Order Operations (COR2)

Hi Experts,
As a part of Process Order Migration, we have a requirement where in we need to pass the confirmation quantity of the Old Process Order number to the Unloading point field (ABLAD) in the Process Order Operation details and set that operation as marked for deletion.
Please suggest if you have come across similar scenarios.
Thanks in advance,
Anand

Hi Anand
Try This BAPI_PRODORD_SET_DELETION_FLAG and it will work for your requirement.
Thanks,
Adil

Release Tab in purchase order disappear after release using ME29n

Hi there,
We are busy testing support stacks (upgrading from ECC6 SAP_APPL SAPKH60305 to SAPKH60307)and we've come accross a strange problem. When we create a normal purchase order (ME21n) the purchase order does pick up a release strategy. Using the older ME28 transaction to release this purchase order, everything is fine. We can use ME28 to release the purchase order, as well as unreleasing the purchase order, as often as we want (the same purchase order). When we use transaction ME29n the release tab in the purchase order just simply disappears after saving. In the purchase order header changes, the release change is visible, but the release tab is missing. This purchase order is now not subject for release, and a goods receipt is possible without release. I checked in table EKKO as well and the release fields in this table for this purchase order is empty.
Has anybody had a similar experience? Any advise would be greatly appreciated.
Regards
Christo Vermeulen

Hi Christo Vermeulen,
I have detected the same problem as reported by you. Did you solve it? Do you know how can I procedure to solve it?
Thanks in advanced,
Eder Nicoleti

Deleting AR Order line after copying to Purchase order

Hello,
It seems to be that after transfering a orderline in a Sale order and activating a direct purchase order of that line, it is possible to delete the orderline. Is there a way to avoid this, because otherwise a item is delivered by the supplier that the customer has revoked in his order.
Thanks,
Freek

Hi
I think wha you are looking is
When You create a PO based on SO , the item is allocated for particular SO and you expect The link is there all the way to A/R invoice .
However SAP by default donot have that function by default . Even though it creates a link by base ref but it doesn't allocate that item for particular SO . So you can do anything you want in AR or AP side even though that PO is based on SO.
Thank you
Bishal

Can I delete photos from iPhoto after importing them to an external hard drive?

For a while my family has been experiencing extreme slowness on our early 2008 iMac running OS X Lion. We tried many different ways to speed it up. I recently bought a new external hard-drive and was going to put some of our media on the hard-drive. Is it possible that I would be able to put my photos, videos, and music onto the hard-drive and delete them from my Mac to possibly speed it up. Also is there is any other possible way to speed it up?

Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
LN

Combine Order Unlreased after release

Hi All,
We are using Mill_OC for combining the production order, we stuck in one functionality.
Can we unreleased the combined order production order or any work around solution???
Regards,
Sameer

Hello
This thread was moved to the space SAP for Mill Products & Mining.
BR
Caetano

What is the column to know the contract purcahse order number after release

HI,
I have confusion on purchase order types.
once we create the purchase order through requisition my purchase order is contract purchase order and i relased the this purcahse through standard purchase order ,now i want details based on database which is showing the conatact purcahse order number link with standard purcahse order.
Thank's

Check on PO_LINES_ALL.
Some column is there. I forgot the actual column names.
You need to go to PO_LINES_ALL of Standard PO and verify the information over there for Contract PO. Then you can club all the Standard PO's based on your Contract PO.

Disabling selected Purchase Order field(s) after released/approved

Hi Experts,
I have a requirement to disable specific Purchase Order fields after released via ME29N.
For example, in Purchase Requisition - I can "Release Indicator - Field Selection Key" to control Purchase Requisition screen layout. However, for Purchase Order - the configuration for "Release Indicator" consist only standard default "Chgable" options.
Question:
Is there a way to customize the Purchase Order "Release Indicator" for screen layout based on customer requirements other that using the default as mentioned above?
Thank you.
Steven

Hi Padmasri,
I understand your explanation on the standard SAP behavior.
Nevertheless, I'm looking for some flexibility to meet customer requirement. Like in Purchase Requisition, there is option to further customize the screen layout by linking it to the "Release Indicator".
Therefore, apart from the standard 6 options given by standard SAP, can we add/customize the options? For example, my customer may one to change a field in the Purchase Order even after released.
Thank you.
Steven

Internal change after Release

Hi
Scenario
We are using internal order (Investment) for capital budgeting.
We have created two roles a)Z_FI_IOCREATION for order creation, change
and display and b)Z_FI_IORELEASE exclusively for releasing the order.
End users create the order and their HOD's release the oders.
Requirement
End users can change the order n number of times but only before
Release of the order.
After release of Order if the order is changed by end user the orders
should be available for Release again. This way we contol the change of
orders after approval. How this can be addressed.
Regards
Ganesh

Hi,
Try whether you do not give authroization for change of Internal Order through transaction code KO02.
Trust this helps much!
Cheers!

Del Flag Production order - Operation remove

Hello,
is it possible to remove the del-flag of an operation in a production order?
Thx,
Christian

HI Ortig,
i think it is not possible with the existing system Please go through the link useful for you Remove deletion flag order operation
Thanks&Regards,
Vermkat.

Production order status, header released, operations created

Hello, I´m struggling with the following problem on production orders
When you look to first line in the header you see that the order is on release. When you go to the operation operation overview the operations are still on created
How is this possible and how to resolve?
If I click on release operation: Invalid function selected comes up.
Br Matthias

Hi,
Plz go to production order operation tab, select operations & just check below a relese flag , just 3 ICON RIGHT TO Component tab, prt tabs.
& click it , operation should be released, if still not released then delete opeartion & recreate them manually.
Thanks.........Rakesh

VA14L why after release credit the report can't get the order again

Operation step:
1: create one order with delivery block indicate, also block by credit check
2:run VA14L, the order is in the list
3:using VKM3 to release the credit block
4:run VA14L, the order is missing in the list
Find out:
Some status(tabke-VBUK) have been changed after credit release
Question:
Why the order with delivery block indicate, but after release credit, it can't be shown in this report?
Does the report filter these order?What's the solution?
Pls give me some advice, thank you in advance.

HI
VA14L Used to show sales orders that are on credit hold and need to be released by the credit department.
So once released the sales order will be removed from the list.
regards
Prashanth

Deletion of order operations after releasing them

Similar Messages

Maybe you are looking for