Deletion of Partially Converted PR

Hi Expert,
          my client requirement is PR has partially converted in PO & if next MRP run demand has been reduced while taking MRP run it need to consider these  Partially conerted PR  & if required then need to be generate PR according this or otherwise thse partially coverted PR need to be delete in MRP Run & generate new PR according to requirement.  But actually these partially converted PR has not taken in MRP run due to Firming or as a Firm PR
can you tell me procedure for this. how we should do this actvity or how we can delete these partially converted PR?
Regards,
Dev

Hi Dev,
In OPPQ for your plant click the rescheduling icon, here you select Fixed Purchase Requisition & select a suitable rescheduling horizon (working days) as per your business need.
Now when there is a partially converted PR, during MRP run system first checks if there is a firmed PR, & it then puts out a proposal to reschedule out / in this partially converted PR to meet the demand.
Alternatively you can untick the fixed indicator in the PR or flag the PR as closed & run MRP with planning mode as 3, system will propose a new PR to meet the need.
Hope the above helps.
Regards,
Vivek

Similar Messages

  • How to delete a partial ios software update ?

    As we all know, ios 7 requires 3.1 GB free to download/ install.
    after deleting tons of stuff, I made 3.2 GB free and the ios 7 download commenced OTA
    as time went on, the download speed steadilly decreased so,after 1.5 hours, it was only 1/4 way downloaded and I had to go to work. as i left the house i lost wifi connection but figured it would just resume when i returned home.
    Now that I am home, the download still shows that its 1/4 through, but it says that i have to make 3.1GB free! The partial download has obviously taken up space, but theres nothing left to delete-  I need everything thats left.
    my question is- how do i delete this partially downloaded software update, so that 3.1GB will be free again? I have toggling airplane mode on and off again and also tried a hard reset, but the partial download still remains and is still taking up space. I looked in itunes app on the phone and checked downloads, but theres nothing there; prob because its not a music download
    thanks

    I should have said that there is now 2.8GB free, so the update must be 300Mb. I dont have enough rubbish to delete in order to gain 300Mb, which is why I need to delete the partial software download

  • Lens Profile Deleted By DNG Converter

    I'm currently having to convert some of my Nikon .nef files into .dng files so that Capture One Pro 8 will read them.
    I'm using the Adobe DNG converter 8.7.1
    After the conversion the lens profile is no longer readable within Capture One Pro 8.
    I assume (probably wrongly) that the lens data is being deleted by the converter?
    Ideally I'd like to have Capture One read all of my .nef files but quite a few of them aren't readable due to (I'm informed) them being damaged. Photoshop and Lightroom can read these files but not Capture One!
    If I could find something that would repair the .nef files I'd be much happier due to the problems I'm getting with the dng converter.
    Thanks for taking the time to read my small rant...

    Ok, your second sentence is what I was asking. 
    What camera model? 
    For DSLRs, PS/ACR and LR use external profiles, so are not actually reading lens profile information from within the raw file, and instead or just reading the lens model information and matching up an external profile with the lens model.
    For mirrorless cameras PS/ACR and LR there is a built-in profile (not sure if in the raw or in the software) that PS/ACR and LR applies automatically and this correction cannot be turned off.
    I don’t know anything about how C1 works.  Do you know if C1 has external profiles or does it only apply conversions that are actually specified in the raw files, which woudn’t be more DSLRs. 
    I guess what I’m asking is about your terminology.  Is what C1 can’t see the lens profile information in mirrorless camera raws (if such information exists in reality, I don’t know) or is what C1 can’t see the lens model information that it would need to determine what lens profile to apply?

  • Mass deletion of partially processed inbound deliveries

    Hi,
    How can we delete the partially processed inbound deliveries for which no further delivery is expected.
    Regards,
    Manish Jain

    Hi
    You can use VKM4. check 'deliveries' and specify the processing status as 'B'.
    in the processing screen, select all relevant deliveries and click 'reject'. selected deliveries will be deleted.
    regards

  • PR - PO, Help with a PR that is partially converted to PO (left over QTY)!

    Hi,
    My current program finds all open PR's (found where EBAN-STATU = 'N') and deletes them. 
    However, say that a PR (all PR's are in UOM EA) is converted to a PO (all PO's are in UOM CSE.) When converted, what if some of the quantity is left over?
    For example, a PR has a line item with a quantity of 12. However, a CSE can only hold 10. In turn, 2 of the quantity will be left over.
    Will they be recognized as open PR's when the next batch of PR's are deleted? How do I test out such a scenario (where can i find such a PR, convert it and see what happens to the left over quantity)?
    All Good responses will be rewarded.
    Thanks,
    John

    Hi
    For Individual PR status
    You can check it in ME53n Status tab processing status might be there. And if any processing has been done like RFQ, PO... it will be displayed in this tab.
    For collective PR status
    You can check it in ME5A
    Regards,
    Raman

  • ACR Delete bug? Converted files deleted with originals!

    Open ACR with a set of raw files.
    Convert and saw in the same location.
    Mark some/all of the originals for deletion.
    Click Done.
    Both the originals and the converted files are deleted. And contrary to the delete function mouse over description, they are not moved to the trash but deleted completely!
    This is not nice behavior.

    Hi Thomas,
    I just did an experiment. I copied some raw files to a new directory on an external hard drive.
    Opened them in ACR.
    Converted/saved.
    Waited for the save queue to complete.
    Confirmed the jpgs were created in explorer.
    Marked the still selected RAW files for deletion.
    Clicked done.
    About half of the JPGs are deleted, this time to the recycle bin.
    I tried with different number of files, and couldn't determine the pattern of which were deleted.
    If after converting I exit ACR. Then reopen and select the RAWs for deletion, the JPGs are not touched.
    So, more data, but not much more sense. ACR is deleting just-converted JPG's, but not all of them, when it deletes the RAWs. If you work from a CF card, either ACR or XP is deleting not moving to the recycle bin.

  • Deletion of partially depreciated Asset

    Hello Friends,
    Is it possible to delete assets which are partially depreciated and have residual life?
    The reason is that it was created for a wrong Company code and now needs to be maintained for the correct Company code.
    Though there might not be a standard fix, is there a better way to deal with this?
    Rgds
    Vijay

    Hi
    i believe that SAP will not allow you to delete an asset no. which some deprecation has been posted .. but if you want to fix this issue you may use T-Code ABT1N - Inter company Asset Transfer to transfer the asset with its accumulated deprecation to the right company code ..
    Regards
    Mahmoud El Nady

  • Deleting a Partial Time Machine Backup? Trash?

    OK so the other night I left my computer alone for a bit and it started making a backup that I didn't want. When I came back to my computer it was half done so I told it to stop backing up. Long story short I had put a clone on the drive and forgot to tell time machine to not backup to that same drive. So now I have a partition with a clone and a partial time machine backup. I want to remove the backup.
    I can't find it within the actual time machine window, since it wasn't a finished backup. Also, I read online somewhere that I shouldn't try to delete in the trash, cus a) that can cause problems supposedly and b) it takes forever.
    Does anyone know how I can do this?
    It is currently sitting in my trash, but I haven't actually deleted it from there yet.
    Thanks

    The issue is that it may take days for the removal to occur if it occurs at all mainly because the backup contains a disc image file with all the data then a bunch of incremental backups that contain some files and some hard links. The system has a real problem when it tries to delete a file that is pointed to by a link but the file is stuck inside an unmountable disc image.
    Trust me. Erasing the volume is your only safe bet.

  • Deleting sections when converting a webpage to PDF

    Newbie question
    I am testing Acrobat XI now. The trial version is 'Pro',  but very likely I won't be needing the 'Pro'-stuff and will go for the standard version.
    The trial version does not have an option to show what it can do in the 'standard'-mode. I know, there is a comparison-list. . .
    When converting a webpage to PDF I can actually delete elements/parts (the boxed elements) - see below.
    Q: Is this also possible in the standard XI version ?
    =
    TIA
    =

    No solution et?
    Good Luck.
    My
    Si
    tes

  • Deleting a partially downloaded app

    How do I delete an app I am in the mist of downloading but no longer want to download but is showing under
    app --> purchases
    I don't want it taking up space or for the files to be half way on my computer.

    All downloaded apps whether partial or not will show in Purcahses but you can, "hide" a purchase.
    Mac App Store: Hiding and unhiding purchases
    And check your Applications folder.
    If the app is there and you don't want it, use this free utility to uninstall >  Download AppCleaner for Mac - Uninstall your apps easily. MacUpdate.com

  • Server for NFS deletes the partially copied file after failover

    Hello, 
    I found the strange behaviour in Server for NFS in the microsoft foc cluster. 
    I have a foc cluster of two nodes(windows server 2k12r2) and server for nfs role is installed on both. now I did mount the export from the client(windows server 2k12r2) where client for nfs role is installed;
    and a large file copying from the clients local drive to the mounted export is started.
    Now during this copying operation I did switch the export to second node(moved it using the failover cluster manager wizard). and what I found is the copying interrupts with
    error message "there is problem accessing file path" and on retry the copying starts all over again, I mean if the 50% was copied previously then
    after retry it will start from 0%.
    I watched the system events on second node with the "procmon" and I found; after the disk gets attached to the second node, the delete operation is get called for this file.
    Now what I need to know is why this delete is been called and who made this called. In the stack of the delete operation I could track the nfssvr.sys but not sure what attributes of that file made it to call the
    delete. 

    Hi,
    It takes us some time to create a failover cluster for testing.
    We tried to copy a large folder which contains many files, and a large VHD file we created.
    The result is the same - it will not restart the copy after failover. Thus as you said it is not caused by design and it should be an issue on your side which causes a Delete and redo the copy.
    Is there any application or specific network settings could terminate a disconnected copy process? Currently I do not have much information about this. 
    Edit: I noticed that it is NFS share and in our test we are using SMB share. Will do the test again to see if any difference. 

  • How do i delete a partially downloaded movie from library

    i started to download harry potter and a few extras started to download but i only wanted the film. now i have stooped them they just show up greyed out in my movies library and on downloads, how can i delete these as this is becomming annoying

    Yes it will stop other downloads on the iPad until you can get rid of it. Have you tried the really standard, basic stuff - restart, reset the iPad?
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Delete pages from converted PDF

    Hi all
    I am newbie to this forum. I have close to 70 PDF which are nothing bur exported reports from Business Objects(BI Tool). The issue is that these PDF's have few blank pages in them. To sit and go thru a 2000Page PDF is tiring and time consuming. I would like to know if there is any way i can write a script or something to automatically detect the blank pages and delete them.
    NOTE: My blank pages would still have the Header and Footer in them.
    I am using Adobe Acroba 7.0 Professional.
    Any help is appreciated.

    NOTE: My blank pages would still have the Header and Footer in them.
    Then they are not really blank. I'm afraid there is really nothing worthwhile to be done. Trying to program a solution to the problem is worse than the problem. Why should you care if there are blank sheets. Hopefully, your workflow doesn't require frequent printing of the 2000 pages.

  • Online PDF to docx partial convert

    I just starting using the online exportPDf and have a problem converting the file. It is a one page (Letter size in portait view) and when it converts I get only about 2/3 of the file in Word. It will edit and what converted is clean, but looks to have stopped about 7' down the page. Tried it a few time with the same file and with different one page files and had the same result. Any suggestions please.

    Good day Njennfam,
    That is certainly odd.  Could you email the file to us? I'd really like to take a closer look at the file and share it with our engineering team.
    Kind regards,
    David
    Acrobat Community manager
    Adobe Systems

  • How do I permanently delete a partial download from itunes?

    I have 2 tv shows that were taking too long to download so I stopped them and deleted them.  But they keep coming back.  Any ideas on how to get rid of them completely?  Thanks in advance!

    You cannot remove items from the queue yourself other than by letting the download complete. If you don't want to do this then contact support and ask them to remove the items for you. You should still be able to download them from your purchase history at a later date.
    tt2

Maybe you are looking for