Deletion of plannable values in a cell does not result in zero value

Hi,
In a planning report when I wanted to set the values in a plannable cell to '0', I just deleted the value in that cell without actually setting a '0' expecting a '0' to appear in that cell after I refresh my report. But instead I get my original value back in the cell. Is this standard behaviour or a bug or do I need to change some setting to get a '0'.
I run my planning reports on the portal.
Thanks.
Regards,
Jaya

Hi,
Check this out please.
[Re: Cannot Save empty cell, can only save 0|Re: Cannot Save empty cell, can only save 0]
regards,
Ergin Ozturk

Similar Messages

Sorting a column does not result in distinct values on Dashboard prompts

Hi,
We have a period column, the records of which are 'JAN-02' , "FEB-02"...."DEC-09". We need sort this column in descending order in Dashboard Prompts. We have another column "Date", which has been used to sort the period column. To achieve this in descending order, we have converted Show Results from “All Values” to “SQL Results” in dashboard prmpts, then entered the below sql.
SELECT "CODE COMBINATIONS"."LINE AC PERIOD" FROM INVOICE_PAYMENTS
order by "CODE COMBINATIONS"."LINE AC DATE" desc
The above sql resulted in non-distinct values as below. Using distinct in the above sql throws syntax error.
Period
JAN-09
JAN-09
JAN-09
FEB-09
FEB-09
How do we get distinct values and in descending order??
Thanks and appreciate any ideas
Surya

Go to advanced tab and check "Use distinct clause" that will fire a distinct to the query.
In the rpd month logical column , there is an option called sort order in the general properties and you need to specify the date column if you need to sort it based on the date column and in the Answers you can simply enable Descending sort order on the same column. That should take care of it
Hope it helps
Thanks
Prash

InfoObject REQUESTER does not contain alpa-conforming value 1006152

Hello All,
I am trying to load data into ODS.
The load is failing at "Data Package 6" Record # 11140. I am getting following message at the failed record. -
"InfoObject REQUESTER does not contain alpa-conforming value 1006152".
I went ahead and checked this record # 11140, in PSA, in Package # 6. There the requester field is populated with "1006152" where it is expecting "Some description".
I went ahead and changed the START_ROUTINE. with
LOOP AT DATA_PACKAGE.
IF NOT DATA_PACKAGE-REQUESTER cs 'S'.
DELETE DATA_PACKAGE.
ENDIF.
ENDLOOP.
Expecting that these erroneous records will be removed and will get a successful load.
I am getting the same error message at the same record # and data-package number.
Any help is highly appreciated.
Thanks,
PK.

Hi
when u r having such a problem of Alpha numerical error in a particular for a particular record.Then u just write a Fomula into that Particular formula USE {TOUPPERCASE(REQUESTER)} & thenn reload to the Target...this will solve the problem...to my knowledge..
try this..
HOPE THIS HELPS
THNX
BI Learner.

Error: InfoObject does not contain alpha-conforming value 20030729

Hi everyone,
I got this problem, that i tried to fix yesterday, but all i did was that i got realy frustrated...
I created an infoobject which is copy of 0DOC_NUMBER and has alpha coversion routine.
Mapping field in DataSource is also type character 10(VBELN) as my infoobject.
But there are some values in this field that i am trying to load, less then 10 characters long (20030729,20051116...) and shouldn't be there, because the values are dates and not document numbers.
But anyway on R/3 side this values are in field which is defined as character 10 (VBELN), and when I am trying to load Infopackage(17500 records) I get 52 errors: InfoObject does not contain alpha-conforming value 20030729.
I don't get it, since both fields are type character 10 and the values are only digits, why do I get this error message and how can I fix it?
PS:One solution is to remove alpha conversion routine from infoobject, but i don't want that.
Regards,
Uro

hi,
sorry... correction, it's 'Exclusive attributes' that cannot be used for navigational attribute, you can set lower case to differentiate ... check the impact of lower case setting here ...
http://help.sap.com/saphelp_bw33/helpdata/en/b7/f470375fbf307ee10000009b38f8cf/frameset.htm
Lowercase letters allowed / not allowed
If this indicator is set, the system differentiates between lowercase letters and capital letters when you use a screen template to input values. If this indicator is not set, the system converts all the letters into capital letters when you use a screen template to input values.
If you choose to allow the use of lowercase letters, you must be aware of what happens when you input variables:
If you want to use the characteristic in variables, the system is only able to find the values for the characteristic if the lowercase letters and the capital letters are typed in accurately on the input screen for variables. If, on the other hand, you do not allow the use of lowercase letters, any characters that you type onto the input screen, are converted automatically into capital letters.
Exclusive attributes:
If you select Exclusively Attributes, the created characteristic can be used only as a display attribute for another characteristic, and not as a dedicated characteristic in the InfoCube. Furthermore, you then cannot transfer the characteristic into InfoCubes. However, you can use it in ODS objects or InfoSets.

Batch Split in OBD & billed for the entire Quantity .RG1 register does not update the excise values

Hi All,
I am new here . We have batch split in Delivery and 601 happens for the individual batches and billing we bill for the entire quantity . Hence the RG1 does not update the excise values for the batches and it is showing as zero (upon extraction in J2I6). Upon research through the program the latest note which i presume is patched
The latest note is N158234 which does not show in the program but seems have been patched considering we are using the Latest version of SAP .
As you see above in the billing we have billed for the whole quantity but RG1 does not update for the since the batches are zero .
My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split .
Now i have checked few other projects in my company and they all seems to be following the program . So i am wondering whether my process or some customization is missing .
Sales order (no batch determination) , in delivery the batches are picked through wm to and batch split happens in the delivery . Then billling for the whole quantity . We have automatic excise invoice creation enabled so no J1IIN .
Can somebody help me .
Thank you

My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split
Which field (H & J) they were referring in VBFA ?
i have checked few other projects in my company and they all seems to be following the program
How about the other projects' values in VBFA where your techinical team is guessing some issue. Have you compared this?
Since you have already the note 158234 implemented in your system, ideally, you should not face any issue.
G. Lakshmipathi

The value in flexfield context reference web bean does not match with the value in the context of the Descriptive flexfield web bean BranchDescFlex. If this in not intended, please go back to correct the data or contact your Systems Administrator for assi

Hi ,
We have enabled context sensitive DFF in Bank Branch Page for HZ_PARTIES DFF , We have created Flex Map so that only bank branch context fields are only displayed in the bank branch page and as we know party information DFF is shared by supplier and Customer Page so we dint want to see any Bank Branch fields or context information in those pages.
We have achieved the requirement but when open existing branches bank branch update is throwing below error message :
"The value in flexfield context reference web bean does not match with the value in the context of the Descriptive flexfield web bean BranchDescFlex. If this in not intended, please go back to correct the data or contact your Systems Administrator for assistance."
this error is thrown only when we open existing branches, if we save existing branch and open then it is not throwing any error message.
Please let us know reason behind this error message.
Thanks,
Mruduala

You are kidding? It took me about 3 minutes to scroll down on my tab to get to the triplex button!
Habe you read the error message?
Quote:
java.sql.SQLSyntaxErrorException: ORA-04098: trigger 'PMS.PROJECT_SEQ' is invalid and failed re-validation
Check the trigger and it should work again.
Timo

CRM R12.0.6 Map Type does not exist in the value set

Hi Everyone
When attempting to access Service Request Types in our CRM UAT Release 12.0.6 environment an error message appears referring to 'Value General for the flexfield segment does not exist in the value set'.
Checked the flexfields for the value set but did not set up a value for MAP_TYPES
Checked our PROD environment but no value set up as above.
Currently in progress of mapping service requests to responsibilites in UAT, could this be the cause and how to resolve? No mapping as yet for service requests set up in PROD. Has anyone else experienced this?
Thanks very much, Louise

Hi IWolbers,
>>I have a recurring problem where all of a sudden I can no longer see the values of my variables when I debug my unit tests. I cannot find a pattern as to when this happens but I experience this across one of every 20 tests that I write. Occasionally
this has also happened during normal debbuging of running code on my machine.
So you mean that it worked well before, am I right?
If you debug the same app in other VS machine, does it work well? So we could make sure that whether it is related to the VS IDE.
Please disable all add-ins in your VS IDE, and then reset your VS settings, debug it again.
https://msdn.microsoft.com/en-us/library/ms247075(v=vs.100).aspx
Or you could run your VS in safe mode, debug it again, at least, we could know that whether it is the add-in's issue.
https://msdn.microsoft.com/en-us/library/ms241278.aspx
To make sure that it is not the project files' issue, create a new blank solution, copy the project files to the new solution, clean and rebuild the solution, check the result.
>>Once I step over this to the next line (screen shot 2) I get the error message 'The name '[variable name]' does not exist in the current context'
How about debugging it with "Step Into" instead of "Step Over"? Or you could add breakpoints between 234 line to 241 line, after the breakpoint is hit, check the watch window again. How about the result?
In addition, do you check other debugger window like local or others?
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I meet a lot of 3G signal when a call signal disappears 3G! I read the manuals and anything I find the problem! I do so with other brands and other cell does not, the same goes when I receive a call!

I meet a lot of 3G signal when a call signal disappears 3G! I read the manuals and anything I find the problem! I do so with other brands and other cell does not, the same goes when I receive a call!

Who is your carrier? Are you actually on 3G?
Do you have 3G turned on or off? Settings > General > Network > Enable 3G

ICP -Cell Does not support Inter company transaction details

Hi All
I have trouble in ICP.... in the metadata i configured the ICP related account and entity are correct and plug account a....
i have written the rules like
Sub Transaction()
HS.SupportsTran "S#Fullline.A#111501.C1#FLW_ST.C2#AGINGACCTREC.C3#AGINGSPECS.C4#ALL"
HS.Supportstran "S#Fullline.A#154501.C1#FLW_LT.C2#AGINGACCTPAY.C3#AGINGSPECS.C4#ALL"
End Sub 'Transaction
in the ProcessICP transaction i assigned correct way but i try to save them the message was throw *" Cell Does not support Inter company transaction details"*
.... Help me urgent
or another way to create the ICP transaction like load the ICP Data ..if possible then how i do (format)?
Regards
Kimi

Hyperion/Oracle includes examples of most of the product functionality in the sample applications. For ICT you will find examples of the metadata, data, rules, and more in the STAT application. Look under \Financial Management\Sample Apps\Statutory and you will see this syntax in the rules file:
Sub Transactions()
HS.SupportsTran "S#ActMon.A#RecltIC.C1#Closing"
HS.SupportsTran "S#ActMon.A#RecltIC.C1#Increases"
End Sub
Also check your scenario settings to ensure the frequency for IC transactions is correct.
--Chris

Selected model does not contain any target value prior

Hi ODM experts,
I have tried to apply the SVM alg in order to find anomalous records.The table source have rows like that:
uniq_rec ID NAME A1 A2 A3 A4 A5 data
577     2052956018     NAMEHDRCP8     2.27     0.4     85.46     0.01     14.54     24-JAN-13
578     1250914484     NAMEDJDRVP3     11.45     1.24     56.24     0.01     43.77     24-JAN-13
579     1968689283     NAMEDKEND12     0.000011     6.78     0.000029     0.01     0.091     24-JAN-13
580     2063389130     NAMEDNMXG14     0.000011     0.65     36.65     0.02     0.091     24-JAN-13
unq_rec is the pk, id is the id for the generic name and A1 .. A5 attributes ,data when collection occur etc
I'm trying to execute the following code:
drop table ALG_SET;
exec dbms_data_mining.drop_model('SVMODEL');
create table ALG_SET (setting_name varchar2(30), setting_value varchar2(4000));
insert into ALG_SET values ('ALGO_NAME','ALGO_SUPPORT_VECTOR_MACHINES');
insert into ALG_SET values ('PREP_AUTO','ON');
commit;
Begin
dbms_data_mining.create_model('SVMODEL', 'CLASSIFICATION', 'ODM_PAR_FIN_HIST', 'UNQ_CRT', null, 'ALG_SET');
end;
The results is the following error:ORA-40104: invalid training data for model build ( if I run the code) .If I run from graphical interface I have obtained this
error code " Selected model does not contain any target value prior"(using the similar model - SVM for anomaly detction plus the same source table )
Please advice what is missing or wrong and if possible how to bypass this issue.
Thanks in advance for support.
Best Regards,
Bogdan

Here is also a newer example of creating a SVM Anomaly model from ODM sample code (12.1 version but this applies to 11.2):
Rem
Rem $Header: rdbms/demo/dmsvodem.sql /main/6 2012/04/15 16:31:56 xbarr Exp $
Rem
Rem dmsvodem.sql
Rem
Rem Copyright (c) 2004, 2012, Oracle and/or its affiliates.
Rem All rights reserved.
Rem
Rem    NAME
Rem      dmsvodem.sql - Sample program for the DBMS_DATA_MINING package.
Rem
Rem    DESCRIPTION
Rem      This script creates an anomaly detection model
Rem      for data analysis and outlier identification using the
Rem      one-class SVM algorithm
Rem      and data in the SH (Sales History)schema in the RDBMS.
Rem
Rem    NOTES
Rem
Rem
Rem    MODIFIED   (MM/DD/YY)
Rem    amozes      01/23/12 - updates for 12c
Rem    xbarr       01/10/12 - add prediction_details demo
Rem    ramkrish    06/14/07 - remove commit after settings
Rem    ramkrish    10/25/07 - replace deprecated get_model calls with catalog
Rem                           queries
Rem    ktaylor     07/11/05 - minor edits to comments
Rem    jcjeon      01/18/05 - add column format
Rem    bmilenov    10/28/04 - bmilenov_oneclass_demo
Rem    bmilenov    10/25/04 - Remove dbms_output statements
Rem    bmilenov    10/22/04 - Comment revision
Rem    bmilenov    10/20/04 - Created
Rem
SET serveroutput ON
SET trimspool ON
SET pages 10000
SET echo ON
--                            SAMPLE PROBLEM
-- Given demographics about a set of customers that are known to have
-- an affinity card, 1) find the most atypical members of this group
-- (outlier identification), 2) discover the common demographic
-- characteristics of the most typical customers with affinity card,
-- and 3) compute how typical a given new/hypothetical customer is.
-- DATA
-- The data for this sample is composed from base tables in the SH schema
-- (See Sample Schema Documentation) and presented through a view:
-- mining_data_one_class_v
-- (See dmsh.sql for view definition).
--                            BUILD THE MODEL
-- Cleanup old model with the same name (if any)
BEGIN DBMS_DATA_MINING.DROP_MODEL('SVMO_SH_Clas_sample');
EXCEPTION WHEN OTHERS THEN NULL; END;
-- PREPARE DATA
-- Automatic data preparation is used.
-- SPECIFY SETTINGS
-- Cleanup old settings table (if any)
BEGIN
EXECUTE IMMEDIATE 'DROP TABLE svmo_sh_sample_settings';
EXCEPTION WHEN OTHERS THEN
NULL;
END;
-- CREATE AND POPULATE A SETTINGS TABLE
set echo off
CREATE TABLE svmo_sh_sample_settings (
setting_name VARCHAR2(30),
setting_value VARCHAR2(4000));
set echo on
BEGIN
-- Populate settings table
-- SVM needs to be selected explicitly (default classifier: Naive Bayes)
-- Examples of other possible overrides are:
-- select a different rate of outliers in the data (default 0.1)
-- (dbms_data_mining.svms_outlier_rate, ,0.05);
-- select a kernel type (default kernel: selected by the algorithm)
-- (dbms_data_mining.svms_kernel_function, dbms_data_mining.svms_linear);
-- (dbms_data_mining.svms_kernel_function, dbms_data_mining.svms_gaussian);
-- turn off active learning (enabled by default)
-- (dbms_data_mining.svms_active_learning, dbms_data_mining.svms_al_disable);
INSERT INTO svmo_sh_sample_settings (setting_name, setting_value) VALUES
(dbms_data_mining.algo_name, dbms_data_mining.algo_support_vector_machines);
INSERT INTO svmo_sh_sample_settings (setting_name, setting_value) VALUES
(dbms_data_mining.prep_auto, dbms_data_mining.prep_auto_on);
END;
-- CREATE A MODEL
-- Build a new one-class SVM Model
-- Note the NULL sprecification for target column name
BEGIN
DBMS_DATA_MINING.CREATE_MODEL(
    model_name          => 'SVMO_SH_Clas_sample',
    mining_function     => dbms_data_mining.classification,
    data_table_name     => 'mining_data_one_class_v',
    case_id_column_name => 'cust_id',
    target_column_name => NULL,
    settings_table_name => 'svmo_sh_sample_settings');
END;
-- DISPLAY MODEL SETTINGS
column setting_name format a30
column setting_value format a30
SELECT setting_name, setting_value
FROM user_mining_model_settings
WHERE model_name = 'SVMO_SH_CLAS_SAMPLE'
ORDER BY setting_name;

Load ODS - InfoObject: InfoObject does not contain alpa-conforming value

Hello everybody,
I get following error while uploading from ODS to InfoObject.
InfoObject /BIC/ZHOUSENUM does not contain alpa-conforming value 0000000000000000004.
The data flow is as follows: Transactional InfoSource -> ODS -> InfoObject.
In the Transfer Rules before ODS I have marked the Conversion check box. The data is populated into ODS without any problems.
I can even activate the ODS, which reporting enabled.
When I browse the ODS table with the option check conversion exits unmarked, I can see the value '0000000000000000004'.
But the upload into InfoObject master data failes
Any help appreciated.
TIA
pawel

sap_all onboard.
I assume, this infosource is locked, due to the fact it was system generated.
On the other hand, there is a s-note 559763 which says:
If an InfoObject is filled with ALPHA exits from an R/3 System, the BW assumes that the data is to arrive in the internal ALPHA format and therefore does not convert the data.
I know, it is about R/3 as source system, but I assume the same would be for BW.
p.

InfoObject FORWAGENT does not contain alpa-conforming value 100.........

HI ALL,
Can someone through some light on resolving the issue
"InfoObject FORWAGENT does not contain alpa-conforming value 100............"
In "Details Tab" of the monitor screen
Requests (messages): Everything OK
Extraction (messages): Errors occurred --> data selection ended succesfully
T ransfer (IDocs and TRFC): Errors occurred -->some of the data packets not yet processed
Processing (data packet): Errors occurred --> while processing transaction data
InfoObject FORWAGENT does not contain alpa-conforming value 100............"
error occured
Please advice how to solve
Thanking you in advance,
Rase

Hi,
Use ALPHA conversion in the general tab of the infoobject FORWAGENT.
then load the data again.
also in the transfer strcture in the right most side tick the option " alpha....."
Thanks

InfoObject does not contain alpha confirming values

Hi ,
I am trying to load data into the object called ZAML_CODE, the type is CHAR and Length is 3.
The characteristic is enabled with ALPHA - Conversion exit.
we are loading data to this object since 3 years successfully.
But now only it is saying that InfoObject ZAML_CODE does not contain alpha confirming values.
Especially we are getting error for numeric values like 1, 2,3 etc only.
Previously numeric values were also loaded successfully.
Now the source system is ECC6.0, previously it was 4.6C. This is the only difference.
Please respond with your suggesions.
Regards
Srinivas

Hello,
Just check if there is space in the front of these numeric values or some garbage value...if there is... then it may not be able to pad it up with zero and hence the issue...check in R/3 about how these values are stored...you can remove the space from the front and change it in PSA...and then load but first do the analysis of the source system and see why its coming up wrong.
Regards
Ajeeet

Infopack Error ( does not contain alpha conforming value 10)

When I try to run my infopack which pulla data from BW into APO, the data load fails with the error below:
"InfoObject /BIC/XXXX does not contain alpa-conforming value 10" when I click on the details icon, I get the following description.
Can somebody please throw some light on this as I am new to DP/BW. Appreciate your help if someone can help me with fixing this problem.
                                                                                Diagnosis
The system checked whether the loaded InfoObject value conforms to the
     conversion exit.The check failed.
For example:
The value '1' was loaded into an InfoObject with alpha exit, even though
     the value '0000000001' was expected.
System response
The load process has failed or the erroneous records are displayed in
     the monitor. This does not depend on how error handling is set up.
Procedure
Find out why the data does not conform to the conversion exit, and, if
     possible, correct the cause. Possible causes are errors in Business
     Content or an error in a customer exit in the source system.
If you cannot correct the problem, you have the option of removing the
     conversion exit on the InfoObject. However, since the system has already
     been converted, duplicates appear in the system again.
Thanks
Varun

Hello Varun,
BW expects your Key Figures to be stored in "alpha conforming format". This is can be roughly described as having 0s in front. For example, if your key figure value is 10, then the alpha conforming value of that is 000000000000000010 (assuming the number of chars in your KF is 18).
To correct the error do the following:
In your transfer rule in BW for InfoObject /BIC/XXXX, implement an ABAP routine that calls function module CONVERSION_EXIT_ALPHA_INPUT. Here an example of the ABAP code you should put in your transfer rule for /BIC/XXXX:
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
    input         = TRAN_STRUCTURE-/bic/xxxx
IMPORTING
   OUTPUT        = RESULT.
Hope this helps. Please post again if you have questions.

Data field FUNCTIONAL_YN does not support the default value (Message 14120)

L.S.,
When defining a data type of category NC, I would like to use data fields of type checkbox. At NC logging data entry the checkbox should be "checked" by default.
When looking for the proper value to indicate that the ccheckbox is selected, I have tried values like: 0, 1, TRUE, FALSE, T, t, X, x ... etc. But always I got the same error message:
"Data field FUNCTIONAL_YN does not support the default value (Message 14120)"
What should be the right value?
Kind regards, Hans

Hans,
It looks as if by means of GUI you cannot specify default state of being selected for Checkbox field. The default state is unselected.
It is easier to invert the statement in the label of the field so that an operator could use unselected state as default.
Regards,
Sergiy

Deletion of plannable values in a cell does not result in zero value

Similar Messages

Maybe you are looking for