Deletion of RA key in FIX project

we heve decided to delete RA key in FIX project.
does anyone can tell me how to do so?
when i try to delete i get a msg "There is still WIP for WBS M-14012-10"
how do i cancel this wip?
another msg is "First cancel settlement"
does it mean to cencel all settlement of this WBS as from staring point on 2007?
I thank you for every piece of at advise at this metter
thank you
amalia

closed. the tcode is KKA1, the settle to jurnal the wip acct.

Similar Messages

Garage Band '11, version 6.0.5 will not change key after new project is started

Garage Band '11 version 6.0.5: Cannot change key after new project is started.
It has always worked ok prior to this. And I have had other issues. How do I reinstall Garage Band '11?
I have looked in downloads, but can'ty find any download file. I had upgraded to Mac OSX 10.6.8 couple years back, which included
Garage Band '11, a new ITunes & new IPhoto.

Before reinstalling I'd try HangTime's fix for "oddball" problems and delete the User preferences and repair permissions, see the FAQ:
http://www.bulletsandbones.com/GB/FAQPages/OddBallProbs.html
The GarageBand 6.0.5 update is here:
GarageBand 6.0.5
If you want to reinstall, install again the GaragaBand application from your installation disk and then upgrade again to 6.05 using the link above or Software update from the Apple Menu.
Regards
Léonie

How do I deleted a movie from an iDVD project

I created an iDVD project using a movie, and have decided to go back into iMovie and make changes to the movie I am using for this project. Since I have put so much time into putting photos and music in submenus, I want to use the same project I created, just replace the old movie with the new. I cannot figure out how to delete the old movie from the project. I have shared the new one thru Media Browser, and it is ready to be added, but I first need to delete the prior version from the iDVD project.
Anyone know how to do this? Thanks.

READ THE ENTIRE MESSAGE BEFORE DELETING ANYTHING !!!
To delete a movie from iDVD: Open iDVD. Click once on the movie title to highlight it. Hit Delete. It should disappear in a poof of smoke.
If you have chapters in your movie, you need to delete the Scene Selection text button also.
But, when you reopen iDVD after changing your movie, before doing anything in iDVD, iDVD should give you a message that your 'assets have changed' and ask if you want iDVD to update. Click on yes/ok, but check your iDVD project before burning. The way it is supposed to work is that iDVD recognizes that you have made changes to your iMovie, uses the revised iMovie in its files instead of the first one, and uses the updated iMovie when you burn to disk or create a disk image. It is a nice feature so that you do not have to delete the iMovie already in iDVD and have to put in your updated newer version; iDVD is supposed to add the update itself, using the newer version of iMovie. It worked that way in iDVD 6.
However, if you have an iMovie with chapters, what happens with iDVD 8/9, as opposed to iDVD 6, is that iDVD does indeed recognize the changes and sends the 'do you want to update' message, but if you tell iDVD to go ahead and update, the chapters will no longer select correctly. They all will default to the same chapter no matter which one is selected.
I can't tell you whether or not iDVD will correctly play the updated movie if you don't have chapters. You will just have to try it.
If you do have chapters and/or incorporating the changes in iMovie does not work, the only 'fix' is to recreate the iDVD project. It takes time but is not difficult since you have done it once. Open a new iDVD project and put the updated iMovie into it. Do a "Save as Disk Image" to create a disk image file of your iDVD project. Play the disk image file with DVD Player. If it plays correctly, burn your disks from the disk image file using Disk Utility or Toast. You can delete the old iDVD project.
Good luck with it!

In deleting an i message the previous message remains on the screen but with the time stamp of the deleted message . how do i fix this?

in deleting an i message the previous message remains on the screen but with the time stamp of the deleted message . how do i fix this?

Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine

Key figure fixing in aggregate level partially locking

Hi Guys,
When fix the cell in the planning book, getting "One or more cells could not be completely fixed" message.
1. If a material having only one CVC in the MPOS those quantity can be fixed correctly without any issues.
2. If a material having more than 1 CVC combination and try to fix one of the CVC combination quantity, it is fixing partially and getting the above message.
3. Even, it is not allowing to fix the quantity in aggregate level also.
We are in SCM 7.0.
Is there precondition that need to fix the material having only one CVC combination.
Even a material having multiple CVC combination why it is not allowing to fix one CVC combination in detail level.
Is aggregate level key figure fixing is not allowed ?
Please clarify.
Thanks
Saravanan V

Hi,
It is not mandatory to assign Standard KF to be able to fix. However your custom infoobject that you created must be of type APO KF and not BW KF.
That said, Let us try and address your first problem.
You can fix at an aggregate level. However there a few points to remember.
Let us consider a couple of scenarios.
1) In your selection id, it is showing a number of products. You are selecting all the products at one go and load the data and try to fix at this level. This is not possible.
2) In your selection id, you have selected a product division. For a single product division you are loading data and try to fix at this level. This is the true aggregate level and it should be possible at this level.
Hope this helps.
Thanks
Mani Suresh

My Itunes is no longer allowing me to manage my music on my phone i can no longer select on my iphone to make playlists and delete music. Please help fix my problem.

My Itunes is no longer allowing me to manage my music on my phone i can no longer select on my iphone to make playlists and delete music. Please help fix my problem. Iphone4s, 32gigs, IOS 7.1.2
I don't know why it stopped working but it happened a month or two ago but the option on this phone that's usually all the way to the left when you select your device but now its not and I don't know what caused it. ive already tried troubleshooting my problem but have found no help.

Hello Salmomma,
Thank you for the details of the issue you are experiencing when trying to connect your iPhone to your Mac. I recommend following the steps in the tutorial below for an issue like this:
iPhone not appearing in iTunes
http://www.apple.com/support/iphone/assistant/itunes/
Additionally, you can delete music directly from the iPhone by swiping the song:
Delete a song from iPhone: In Songs, swipe the song, then tap Delete.
iPhone User Guide
http://manuals.info.apple.com/MANUALS/1000/MA1658/en_US/iphone_ios6_user_guide.p df
Thank you for using Apple Support Communities.
Best,
Sheila M.

I need to reprogram the delete and enter key to the left side of a external keyboard for the ipad mini. don't need the caps/lock or ctrl key and due to an injury my daughter can only use her left hand to type. She is using a text to speech app to verbaliz

I need to reprogram the delete and enter key to the left side of a external keyboard for the ipad mini. I don't need the caps/lock or ctrl key. Due to a brain injury my daughter can only use her left hand to type. She also uses a text to speech app to verbalize all of her needs since her speech isn't intelligible any longer either. And her vision was significantly affected also, so the keyboard has to be mounted about 6 inches from her face. So to reach across the keyboard with her left hand to the right side delete and enter button is physically difficult and causes typing errors, which cause people to not understand what shes trying to say.
The best keyboard so far is the Zagg folio mini. I just had to make stickers to enlarge the letters on the key buttons.
Does anyone know how I can reprogram these two keys? Or where I can buy a wireless mini keyboard for Ipad made for lefthanders with these two functions on the left side. I have searched for days and days. It's sooooo important to me that she be able to contribute her voice again. Imagine if you got in a car accident and couldn't speak clearly any longer, but understood everything still. Thanks for any help and suggestions you all take the time to share with me. I really appreciate the kindness of strangers to help me help my daughter.
Sami's mom

Sami\'s mom wrote:
I need to reprogram the delete and enter key to the left side of a external keyboard for the ipad mini.
You cannot.

How to delete unused audio files in a project?

Hi guys,
The question is fairly simple:
How to delete unused audio files in a project?
I can't manage to find the answer in the manual,... all I could find is how to delete audio outside used regions!
But in the projects I use, I have loads of outtakes which I don't use in the project anymore, and now, I would like to delete them of the audio folder to save space on the HD.
Can Logic select automatically the takes in the audio files folder which are not used in the project and delete them??
Because there is hundreds of audio files per project, and +/- 50 projects, I just can't do it manually.
Thanks,
Fred

Whoops! Yes, I knew that but a cow flew by... Sorry!
The procedure I follow is to do what I described then Save as Project, creating a project folder. That way only the required audio is saved to the folder and I delete all temporary stuff. However, if you have folders with shared material, it's much harder and would require you to go through all your projects doing Save as Project before you could delete your old working folder.
When doing day to day work, best practice is to create a new folder and only use Save as Project when you're working on stuff. Shared material (eg sample libraries etc) can go elsewhere and you can get Logic to copy those to the project folder automatically.
Otherwise, Shift-Backspace in the Audio window, as you rightly say
Pete

Problems deleting a primary key field in a table.

Hello Guys,
I deleted a primary key field in a custom table by clicking 'delete row' icon and then tried activating it through se14 - database utility. It is throwing an error saying 'Primary key change not permited for the value table zxxxx'. What is the problem???
How can I delete a primary key in a table??
Please help.
Thanks,
Naren

I am pasting the detail explaination over that error.
Primary key change not permitted for value table ZTV_RANGE_NUMBER
Message no. AD 300
Diagnosis
This table is defined as a check table. For reasons of consistency, changes to the primary key of the table are not allowed.
Procedure
If it is essential that you change the primary key, you must delete the relevant foreign keys. Refer to the where-used list to find all tables containing a field that is checked against this table. Delete the foreign keys for these fields.
If necessary, maintain the deleted foreign keys again.

How to search for a pattern string in entire registry and delete all the keys and subkeys that contain the pattern (C# or VB)?

I want to search for a pattern string in the entire registry and need to delete all the keys and sub-keys that contain the pattern. How can I implement this in VB Script or C#? Appreciate if you can give some sample examples. Now every time, I am manually
searching for the pattern in registry and deleting one by one.
Thanks Prasad

There is no built in way to do this. You'll end up having to enumerate all keys and values in the entire registry and comparing each one for a pattern using Regex or similar. This is going to be really slow but there isn't much else you can do about
it (other than parallelize the enumeration). Also note that you won't have permissions to all keys for read and/or write access so you'll need to skip over those using exception handling.
Michael Taylor
http://blogs.msmvps.com/p3net

I deleted my SYNC Key and now realilze I want it. How do I reinstall it. The Sync Key under options does not work

I deleted the Sync Key, I thought it was just a refresh button and was not working. I have now read more about it, and want ot reinstall it, but when I go from tools>options.Sync, I get:
Incorrect account name or password: Update, reset or unlink
I have tried all three.
I know I made the error, but I don't know how to retrieve it. I have not shut my computer down, but I can;t seem to find it in my history either.
HELP ME PLEASE

User account – restore missing admin

I delete my google contact by fixing the duplicate names, after that I could not add back my contact ? but calendar and e mail works

I delete my google contact by fixing the duplicate names, after that I could not add back my contact ? but calendar and e mail works

On my old I phone 3 at the setting it show "mail,contacts, calendars, reminders" but why I phone 4 only show "mail calendar, notes" is this why I can not get my contact back to my phone?

Unable to backup/delete/change encryption key after SSRS 2008 R2 installation

Hi,
I am having issue with SSRS 2008 R2 Std installation with Sharepoint integration. hope may get some help from here.
During the SSRS configuration in the SSRS Config Mgr
the following error message come up when access web service URL/backup/delete/change encryption key:
Report service error
•An internal error occurred on the report server. See the error log for more
details. (rsInternalError) Get Online Help
◦The profile for the user is a temporary profile. (Exception from HRESULT:
0x80090024)
I can avoid the issue when use Local system account to run the SSRS but domain account is required for Sharepoint integration.
Does this have something to do with how the windows user profiles are configured?

Hi Gone_Fishing,
Reporting Services uses encryption keys to secure credentials and connection information that is stored in a report server database. In Reporting Services, encryption is supported through a combination of public, private, and symmetric keys that are
used to protect sensitive data. As to access Web Service URL, we can try to cope the URL, then run it in IE as administrators.
About the error”The profile for the user is a temporary profile”, Windows will create a temporary profile when it is unable to read the user profile files. For more details, we can refer to the following blog:
http://journeyintobi.com/2013/11/the-profile-for-the-user-is-a-temporary-profile-or-how-simple-solutions-are-sometimes-really-the-answer-to-a-given-problem/
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Is there a method of deleting the developer key from the user?

Is there a method of deleting the developer key from the user?
Please help me.

Hi Matt,
Could you explain from which table should be deleted..?
Thanks.
Regards,
Ramses Hutahaean

When I upload photos to iPhoto from my iPhone and then press delete from iPhone it does not delete them, how do I fix this?

When I upload photos to iPhoto from my iPhone and then press delete from iPhone it does not delete them, how do I fix this?

I am having the same problems as this person. I see that someone said there is no way to retrieve the pictures once it gets stuck in recovery mode.
Then further along someone said that there are data retrieval methods except they have something to do with jail breaking a phone.
My phone is already jail broken. It was kind of a gift from the company I work for- it was a fellow employees before. He jail broke it and then it was given to me. After I got it I activated the 4 and tried to back up everything. It didn't work and "Springboard" forced the phone into safety mode. So I could use it with the old dude's apps and my contacts. I made the mistake of using the phone for wedding dress shopping with a friend. I took tons of pictures.
After this I found out the messages I was seeing meant it was jail broken. At&t said to force restore the phone - iTunes wouldn't recognize it in safety mode. I'm an idiot and didn't realize what this meant for my pictures. It didn't work (error 1611) - thankfully. Now it is stuck in recovery mode (iTunes icon and USB cable picture).
Can I access that media in any way? It never suceeded restoring itself so is it still there? The phone is jail broken already so is there a method I can use?

Deletion of RA key in FIX project

Similar Messages

Maybe you are looking for