Deletion of SWCV in Integration Repository

Hi,
How do you delete incorrectly created SWCV from the Integration Repository ?
I can remove ok in the SLD but how do you then delete in the Integration Repository ?
I am using XI on Web AS 7.0
Any ideas ?
Kind regards
Colin.

Hi Colin,
Please take a look at this..
How to Delete multiple Software Component from repository
cheers,
Prashanth

Similar Messages

Deleting SWCV from Integration Repository

Hi everyone.
I've imported some SWCV into 'integration repository'.
I've deleted this SWCV from SLD. I've refresh the cache.
The SWCV appear in the integration repository and i want to delete them.
How can i do this?
Thanks.

Just want to clarrify for anyone else...
You need to double click the SVCV to get it into your right frame of the Intergration Designer.
Then as suggested in that right frame - Click on Software Component Version > Delete. Delete will take place and it is permanent !.

Problem in importing SWCV in Integration Repository

Hi All,
I am facing a problem while importing SWCV in Integration repository. it is throwing an error as
<b>Unable to read Software Component Version from the System Landscape Directory "XI1:50000"(SWC_IMPORT_PROCESS_EXCEPTION).</b>
Regards,
Chandu

Hi Chandrasekhar,
Have you configure SLD properly. to check this give the tcode 'sldcheck'. if it is not giving any error, u have to create 'lcr' rolesin j2ee UME and those roles to be maped to the users using j2ee visuval administrator. for more information check SLD configuration guide .
Regards
N.Amarnath

Can't delete Software Component in Integration Repository

Created Software Component,technical system, business system in SLD. Imported SC into IR (didn't create any scenarios/Dt/Mt/mi/etc yet).
Want to delete the Software Component and remove it from Integration Repository. Was able to delete in SC SLD, but cannot detemine how to delete in IR. The delete option is gray out. Any ideas..

Hi,
If you haven't activated it yet, then you can simply Reject Changes from the change list.
Otherwise, to delete SC you need to delete the SC Version (open for editing and choose "Delete SC version" from the menu). It is possible after you removed all namespaces and their objects.
The SC will be removed if it has no SC Versions in the IR.
Hope this helps.

SAP original SWCV in Integr.Repository

Hello,
this is a funny thing. XI 3.0 started with SP12
In Integr. Repository I have originally one SAP SWCV - SAP BASIS -> SAP BASIS 6.40 .
Here I am not able to import IDOC / RFC. The function is greyed out.
So I added the SWCV SAP BASIS -> SAP BASIS 6.20 . Here I can import IDOC / RFC.
Question: Is there a special reason for this behaviour?
What about changes when moving to next release after 6.40. Will then the BASIS 6.40 be active and the SWCV for the current next higher release be inactive for import?
If I import now from a SAP System on release 6.40 an RFC into the SWCV SAP BASIS 6.20 I will loose overview about release dependency of imported functions.
Any idea how to solve this, or is there a problem in my system?
Best regards
Dirk

I guess by default, if you import any SWCV from a file or any SAP pre-delivered integration content, the property "Objects are modifiable" is not checked (This property appears on right hand side bottom when double clicked on SWCV). Because of this it won't allow importing any RFCs.
When you said you added SAP BASIS 6.20, did you see any predelivered content along with it. If not, then by default, the option "Objects are modifiable" would have been checked allowing for addition of objects.
I guess any pre-delivered integration content will be non-modifiable.
Hope this helps.

How to delete objects created in Integration repository(IR)

Hi,
I have created software componant in SLD and then imported that into IR.
Now i want to delete all objects from SLD as well as IR.
I have deleted theobjects from SLD but i am unable to delete the software componant objects from IR.
Can anyone please let me know how we can delete objects from ID?
Thanks,
Chintan Soni.

Hi,
If you have imported from the SLD into IR you will see the Software Component and one level down you see one or more Software Component Versions.
You can delete the Software Component Versions (one by one) and when you delete the last SWCV the Software Component will also be deleted.
kr
Robert

How to delete object in Integration Repository SAP PI 7.0

how to delete object in Integration Repository SAP PI 7.0

Hi Rashmi,
Right click on the object, you would find the option to delete--> select it. Goto Changelist Tab and activate the changes.
Ref: /people/siva.maranani/blog/2005/05/22/how-to-delete-software-component-from-integration-builder
Re: How to delete/remove the software component from integration repository
Thanks,

How to delete/remove the software component from integration repository

Dear All
How to delete/remove the software component from integration repository which we have created some Data and message types.
Regards
Blue

Hi,
Follow the steps below to delete the Software component:
1. Delete the created Data Types, Message Types, Message Interfaces, Message Mappings, Interface Mappings and other imported objects like RFC's or IDoc's. Activate all changes.
2. Then delete the namespace and the default datatypes present with the namespace after checking "objects are modifiable".
3. Then delete the SW component, after placing the radio button in "Not permitted".
Regds,
Pinangshuk.

Deleting scenario from Integration Repository.

Dear All,
I was having one scenario in the Dev server which was having all the objects in it like namespace, DT, MT, MI, MM & IM. After testing now I want to delete the complete scenario from Repository. I have deleted all the objects like DT, MT, MI, MM & IM. But when I am deleting the namespace its giving me an error that delete the objects first. I am checking the objects and none of them is existing as I have already deleted them. I have even activated the scenario after deletion of the objects.
When I am deleting the namespace then its giving me an error that 2 objects are already exisitng and they will be deleted irrevocably.
Please guide me on how to delete the complete scenario fro IR.
Regards,
jain

Hi nishu,
First activate the two default data types(exchane ,log) thats created during any namespace creation and then try to delete the namespace...it should be deleted now...!!!
If u still face the problem!!!
click on the namespace and chek "where-used"..then u can see ...which objects are still associated with it....after deleting activate the changelist..then...delete the namespace!!!
regards
biplab

Duplicate software componentn in Integration Repository

Hi Experts,
I have a scenario here in which I was trying to move my objects in Integration Repository from dev to prod by simply exporting it. I have done exporting all objects by choosing " All objects of Individual Namespaces ".
Now, my problem is when i successfully Imported my objects to production. It does not update the existing Software component version where my object is located, but instead, it creates a duplicate Software component containing the same Software component version and namespaces(old-running in production and newly created objects).
I haven't activated this yet, beacause I was trying to delete this, but whenever I try to delete what I have imported, it says that the old namespace would be affected since they have the same namespace in which this is already running in production.
Do you have any idea how can I delete what I have Imported, our Go-live would be next week. and also how will I export my objects in dev, without duplicating it in prd. Thanks in advance.

Hi,
I hope you can try " Reject Changes" if didn't activated the SWCV. Else for deletion, you can use below weblog.
/people/siva.maranani/blog/2005/05/22/how-to-delete-software-component-from-integration-builder
Secondly have a look into below document for consistent changes for SWC while transporting,
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/adb8f911-0d01-0010-82b9-a8134d7d89d5?quicklink=index&overridelayout=true
Regards
Aashish Sinha

Modification Buttons not active in Integration Repository

Hello,
we have a strange behaviour in Integration Repository. With java 1.3 on frontend all looks fine but with 1.6 modification buttons (text-preview...) for message-mapping objects (tab Design) are not active.
Does anybody know this issue? What can we do to sail round this problem?
Thanks
Andreas

Hi Andreas,
I faced the same issue some times back, when I upgraded java from 1.4 to 1.6 version.
So I had to disable all the java version later than java 1.4.2.
Try this steps :-
1. go to Control Panel - Java.
2. In Java control panel , go to General tab.
   In temprory internet files click View. Here delete all the entries related to Your XI link.
3. In Java control panel, go to Java tab.
   In java Applet Runtime Settings, click View. Uncheck all the version later than java 1.4.2.
   In java Application Runtime Settings, click View. Uncheck all the version later than java 1.4.2.
Regards,
Sunil Chandra

How to Change SWCV in Integration Directory for adapters

Because of new SWCV, I have to point all interfaces to new version of SWCV. How can I assign Service Without Party / Business System Service to point to interfaces that require new SWCV?
I deleted and recreated Sender Agreement, Receiver Agreement, Interface Determination, Receiver Determination for new SWCV in Integration Directory but I could not assign or create Business System to interfaces for new SWCV. It is still pointing to old version of SWCV.
Can someone give steps on how I can change the SWCV in the Integration Directory?
Thanks

hi,
>>>>How can I assign Service Without Party / Business System Service to point to interfaces that require new SWCV?
you can only assing once
later on you just ADD them to the scenarios
by using <b>Add to scenario</b> function
Regards,
michal

Integration Repository: change XSD type in data types

Hi,
we created data types for our interface where we used the XSD type float and integer. We built on that Message types and Message interfaces and used them as abstract types in a BPM scenario.
During our test phase we encountered errors with these XSD types and found out that it is better to switch the XSD type to string to get correct values.
However the changes in XSD types are obviously only visible in the Integration Repository. XI creates on Application Server side in the XML Object Type Builder an object which doesn't notice this change. And because of that we get still errors.
So does anyone know how to get this XML Object Type changed? We don't want to delete everything and create new message types?
Thanks in advance,
Christina

Hi Christina,
First go to SXI_CACHE -> Refresh the cache.
Also check for the Repository Cache Refresh/Notifciations..
You mean you have changed the xsd in the External Definition ...
If so , just go to Message Interfaces and just select the External definition once again and activate the same.
If you change the Data types then , if there is a change in field length/type then try to redo/reselect the datat types for the message types and activate once again.
For BPM just change something.. and activate once again..
Also check this blog- to activate Runtime version of the BPM
/people/krishna.moorthyp/blog/2005/11/28/inactive-integration-process-ip-at-run-time
Hope this helps,
Regards,
Moorthy
Message was edited by: Krishna Moorthy P

Storage of IDOC definitions in Integration Repository

Hi there,
I'm trying to define development standards for the use of XI and I can't seem to find any recommendation for the storage of SAP interface definitions (IDOCs, RFCs, etc)within the Integration Directory.
We have an environment with multiple SAP systems including regional R/3 systems which have differing definitions of standard IDOCs - eg different ORDERS05 IDOCs, so do I need to store these definitions in system specfic SWCV?
My thought is to create a Product in the SLD (OUR_BASIS) with multiple SWCV relevant to specific SAP systems (OUR_BASIS_R3_EUROPE, OUR_BASIS_R3_USA etc) each of which could be brought into the Integration Repository to store the system specific objects. The names are non-SID specific to prevent naming issues moving through development, quality and live XI environments. I would then link the product to each of the SAP systems in the SLD, adding new SWCV as more systems are put into the SLD.
Does this seem like a reasonible solution? Does anyone else have or know of other recommendations?
I will be grateful for any assistance and will dish out reward points as appropriate.
Many thanks,
- Ian

Hi Ian,
I tried to understand the reason of why would you want to create custom software components in your SLD for multiple SAP systems and import IDocs arising out of these systems into different software component versions? I guess this would defeat the basic purpose of developing objects under software components and the idea of developing integration objects (mapping, data type etc) under software components and not based on phycial system or geographical location.
Let's take an example. If you consider software component X release 1.1 installed on SAP system A. Consider this is a standard software component version delivered by the vendor. And you don't have any authorization to change the objects under this software component. In such scenario, whether you have this software component installed on SAP System A or B or C you just need to import it once under that software component version. Say IDoc ORDERS05. Irrespective of which system you download it from, it's definition is going to remain the same.
Also, system dependencies and actual source and target definitions should not be part of your software component versions. They should be in Integration Directory and should be kept independent of the software components.
Any custom development will be obviously grouped under custom software components.
Message was edited by: Anand Shankar
Message was edited by: Anand Shankar

Objects arrangement in Integration Repository

Hi All,
I have some questions about Objects Arrangement in Integration Repository.
Lets say that the scenario is as follow :
I have two on going projects. There are data exchanges in both projects.
In Project_1, R/3 needs to get data from CRM system,
while in Project_2, R/3 needs to get data from SEM system.
How should I arrange the objects in Integration Repository using the most common way (best practice) ?
(For example, is it supposed to be like this
Model A :
Product : MYCOMP_R/3
SWC : MYCOMP_R/3
NameSpace : http://mycompany.com/R3/Project_1
          (Here we put all the R/3 related Objects of Project_1)
               http://mycompany.com/R3/Project_2
          (Here we put all the R/3 related Objects of Project_2)
Product : MYCOMP_CRM
SWC : MYCOMP_CRM
NameSpace : http://mycompany.com/CRM/Project_1
                       (Here we put all the CRM related Objects of Project_1)
Product : MYCOMP_SEM
SWC : MYCOMP_SEM
NameSpace : http://mycompany.com/SEM/Project_2
                       (Here we put all the SEM related Objects of Project_2)
or like this ?
Model B :
Product : PROJECT_1
SWC : PROJECT_1
NameSpace : http://mycompany.com/proj1/R3
               (Here we put all the R/3 related Objects of Project_1)
               http://mycompany.com/proj1/CRM
               (Here we put all the CRM related Objects of Project_1)
Product : PROJECT_2
SWC : PROJECT_2
NameSpace : http://mycompany.com/proj2/R3
               (Here we put all the R/3 related Objects of Project_2)
               http://mycompany.com/proj2/SEM
               (Here we put all the SEM related Objects of Project_2)
Please advise me
Thanks in advance,
Andy S

Hi,
1. You have a choice of making one SWCV per project in a company or per Thrid-party project.
2. You can have one SWCV and then have one namespace for each Interface you are developing itrrespective of the sender or reciever system.
3. If you have one SWCV for each Third-party product then you have to again design as to where different object should be , Sender system or reciver system.
4. If you keep all the object pertaining to one Interface together under a namespace the readability increases.
Hope this helps.
Regards
Vijaya

Deletion of SWCV in Integration Repository

Similar Messages

Maybe you are looking for