DELETION OF VARIANT
Hi everyone,
I had an issue in deleting a variant for one of the standard tcode which crete/change vendor data (PRAA)in production system..
I have searched every where but couldn't solve this
My question is can we delete the variant in production system for standard program?
Thanks,
salini
>
salini bhimireddy wrote:
> I tried going to variants--->delete but its not deleting the variiant.
Does it give you any message when it fails ?
Is this problem specific to your user, if yes check SU53 & see if you have any failed authorizations.
Similar Messages
-
How to delete the variant in report
Hi Friends ,
i am unable to delete the Variant from the Report.
please find the error in attached screen shot.
Regards,
Muralidhar.Hi ,
You can check weather variant is protected or not in table VARID and field 'Indicator' by passing your variant name in field 'Variant'..
https://help.sap.com/saphelp_nw70/helpdata/en/c0/98038ce58611d194cc00a0c94260a5/content.htm
please check this link it shows how to make a variant protected... ex: if you create a variant and make it protected then only you can make the value changes in that variant it won't allow other users to make changes in the values.
RSVARENT this is the program which cancels the protected variants..
Regards,
Nitin -
Urgent - How to delete a variant in F110 (automatic payment program)
Hello,
I want to delete a variant created in printout medium tab. Please guide me.
version- 4.6c
Thanks in advance.
Regards,
JayHello All,
I got the solution, we need to follow the following steps to delete the variant from print payment tab of F110 permanently.
1) Enter transaction SE38
2) Enter the print program name (e.g. ZRFFOUS_C)
3) Select variant tab
4) Click on change tab
5) Select the variant that needs to be deleted.
6) Click on Delete tab.
Regards,
Jay -
Delete Indexes Variant ended with errors in Process chain
Hi experts,
I have a process chain which executes dialy to load data Info Cube we create the index and finally we delete the index after that we have few variants..
Remaining all variants are executed with out errors except delete index variant I checked the error message it shows that <b>" The system has not finished loading request APO_R46PWZHRIA7JS9NOM8X879QEZJ into data target ZUP_CARF1"</b>
It is so happened weekly twice or trice not every day. one day it was running with out any errors and one day this process chan was ended with errors.
I need to know the reason why this variant was executed with errors.?
I need your valule sugestions regarding this issue.
Regards
sailekhahi sailekha,
therevare some functional constraint of processes.
while deleting indexes
it is not possible to:
loading
indexes are being built
stastics are being built
during rollup
while compressing
while updating.
my be u can check which is the other process chain that does all above oprations in concerned infoprovider.
bye -
Hi,
how can I let user to delete dislpay variant of alv grid.
Thank you.
MarianHi,
Path:
Settings - layout - layout management
You see the table of layouts
-> Edit - delete layout or button trash
Regards Andreas -
Delete the variants of a query from SAP GUI
Hi all,
We have migrated queries from 3.5 to 7.0, and now we are migrating their variants also.
But while migrating variants we got a situation where some variants got copied but not activated in 7.0.
so now we want to delete those variants and migrate it again as they are not being over written.
so, my question is how can we delete variants for a query in one shot from SAP GUI.
plzz....help asap.Hi,
note : 1003481... makes the point that...
But the variant cannot be migrated when a variant with same technical name already exists in 'new' variant storage
would it be possible that the variant that you are trying to migrate shares a tech name with one already on the system?
to check variant tables for tech names used twice....
tx: se16
a)rsrvariant, (3x variants)
c)rsrparametrizat(bi 7 made variants)
variants that appear in rsrvariant (3x) will not migrate if the same
tech name appears already in rsrparametrizat (new storage area for bi7).
Delete the variant please refer the thread:
How to delete the Variants?.
Delete multiple variant
Thanks,
Venkat -
Mass deletion of variants for Total Records
Hi there,
during tranings we create a lot of variants for the Total Records (UCWB->Analysis->Total Records->Save Variant). Is there a way to do a mass deletion of those variants?
The standard options of deleting variants only allows to delete one variant per selection.
We work with a SEM BCS EHP 4.
Thanks for all help,
HelgeHelge
you can do a mass deletion of variants.
First you will need to find the program name for the Totals Records. This can be found from the totals records screen when you click the Get Variant button. Across the top of the dialogue box you will see;
"Variant catelogue for program XXXXXXXXX".
Note this program ID.
Go to TCode SE38
Key in the program - make sure the Short description for the Program is "List of Totals Records"
Check the Variants checkbox
Click on Display
From the menu - go Variants > Catelogue
This should give a list of the variants for the Totals Records. If not then you must have the wrong program.
Click the button which has the picture of the rubbish bin with the words "Selection Criteria".
This will then allow you to put a check mark against all the variants you want deleted.
Click the button which has the picture of the rubbish bin with the word "Variant"
This will then mass delete your variants.
Regards -
Thanks.
Hi,
Deleting Variants Procedure
1.Open the appropriate variant as described in Creating a Variant.
2.On the initial screen, choose Variants ® Delete.
3.The ABAP: Delete Variants dialog box appears.
4.Choose whether you want to delete the variant in all clients, or only in the current client.
5.Confirm your choice.
Result
Reward If Helpfull,
Naresh. -
I want to delete all variants at a time
hi,
iam having 400 variants in sinlge program.
i want to delete all variants at a time. can any boby tell me how to delete all at a time.HI
1. Simple.
2. goto se38 initial screen.
3. type the program name
4. Choose RADIO BUTTON - VARIANTS
6. Choose change
7. a new screen will come
8. select the variant name
9. Choose DELETE button.
OR
use FM RS_VARIANT_SCREEN to create/change/delete variants
<b>Reward if usefull</b> -
Dear Experts,
As we have transaction SHD0 to Create or Delete Transaction and Screen variants. Do we have any transaction to delete layout variant in ALV?
I have to delete some layout variants in Interactive ALV report.
Thank You,
Best Regards
VenkiDid you explore?
Settings > layout > layout management-> Edit - delete layout or trash -
How to delete the Variants?.
Hi Friends,
I have created Variants for MD process chains to be scheduled perodically. There are about 5 Process chains and for each process chain i have created a variant in SE38 , and i have scheduled each of them in the background job periodically.
Now I have to create a Variant only for Meta chain, i have done that. But i need to delete the Variants for each of those process chains which i have created. How to delete the Variants?.
Can anyone please help me.
Thanks in Advance.
BNYou can delete variant from process chain with the below ways...
U can delete variants from table RSPCVARIANT (also see RSPCVARIANTATTR).
OR
If u wanted delete complete process chain (including process variant), U can delete PC from table RSPCCHAIN (see also RSPCVARIANTATTR)
OR
You can find Delete Feature in the Variant Itself. Open a variant - Delete
OR
when you edit the process chain, right click on the process and select maintain variant. On the next screen you have a delete button.
OR
you can use debugging to delete the variant if you are good at ABAP.
Thanks,
Saveen Kumar -
Hi,
We are using REUSE_REUSE_ALV_VARIANT_F4, And we created a variant in output list..of alv output. So, could u kindly tell me how to to delete variant in the output list.
Thanks in Advance
joguhi,
use the fm
DIPVAR_DELETE_VARIANTS
to delete the variants...
pls reward if helpful. -
How to delete Process Variants in Process chain
Hello,
I created few test Process Variants I would like to delete how can we delete those?
Thanks,I created few process variants but i did not saved those in process chain so i can not edit those in process chain
when I am trying to create new process chain in the popup window still showing old variants how to delete those
Thanks, -
ALE Error + Mass deletion of variants for Reports
Hi,
I have two questions
1- is there any transaction in SAP, which delete the mass variants for reports for all users?
2- I am getting an error An Idoc without a message type was passed to the ALE layer.
I have already check file port is set up correctly and I am passing message type HROT_BRM.
This also happen in previous test, as user does not have the proper authorization, so I assign the authorization and ran it. It worked.
However, this time a user has the authorization and still the error messaging is coming. Am I missing something?
Waiting
ByeThere are some function modules like "KYVA_REPORT_VARIANTS_DELETE or get user variants "RM_GET_VARIANTS_4_REPORT_USER".
- is there any transaction in SAP, which delete the mass variants for reports for all users?
2- I am getting an error An Idoc without a message type was passed to the ALE layer.
I have already check file port is set up correctly and I am passing message type HROT_BRM.
This also happen in previous test, as user does not have the proper authorization, so I assign the authorization and ran it. It worked.
However, this time a user has the authorization and still the error messaging is coming. Am I missing something? -
"Delete PSA" variant not transported
I have a process chain which involves a 'Delete PSA request' process. When this is transported into our Test environment the variants do not appear so the deletion does not happen. The process still exists but the variant defining which PSA to delete is blank and so no deletion occurs.
Does anyone know what the problem could be and how we can resolve it?Hi, the table names are different in Dev and QA (/BIC/B0000628 in QA and /BIC/B0000302 in Dev). So if we reactivate the datasource in Dev, then re-transport the datasources and then retransport the process chains should this resolve the issue? Would the psa tables be re-created with the correct table names in QA if we do this?
Nothing in QA has been activated manually after transport so not sure how that would happen.
We are using NW 2004s, SP 8 at the moment.
Thanks for you help
Message was edited by: Katherine Huggins
Maybe you are looking for
-
Please can you help me? I have tried to load iTunes Match onto my mac Pro but it tells me I have reached my 5 limit. I do not have 5 items with iTunes match on them so I am confused. I have two iMacs a phone and iPod and want to put match onto my pro
-
Multiprovder objects missing in the Query Designer
Hi, I have multiprovider based on 2 infosets ( as the reproting is based on master data) . Later on i have added couple of objects in master data and adjusted the infoset and activated it . The multiprovider also ajusted after adding the fields. I ha
-
Doubt regarding File Content Conversion.
Hi Experts, my scenario is : XML - >XI -> FCC my input is: <?xml version="1.0" encoding="UTF-8"?> <ns0:FCC_MT xmlns:ns0="urn:passhe.com/TestXMLtoFCC"> <Name> <Fname>firstname</Fname> <Lname>last name</Lname> </Name> <Address
-
Linking to a specific slide in an different swf
I have a rather large course...each of the eight modules in this course is a separate swf. Is there any way that I can link back to a specific slide within a swf. As of right now I use Open URL or File to link back to the desired swf, but this only t
-
Standard Report (urgent)
Hai, Is there any standard report for show Excise invoice (J1IEX) completed and MIRO is pending Step 1.ME21N 2.MIGO 3.J1IEX (CENVAT CLEARING ACCOUNT CREDIT ) 4.MIRO Regards Ram