Deletion only possible if status is initial Message no. NR621

Dear RE Experts,
I Created wrong No range in Business Entity. When I am trying to delete wrong no range system showing massage
"Deletion only possible if status is initial "
I am created new No range with Internal of 0 but still not deleted.
Kindly guide me how to delete it?
Thanks,
Mancy

HI,
Open the number range dialog, click on the number range which you want to update, and from the menu select Interval -> Change current number. Now it allows you to change the current number to '0'. Save and then try to delete the number range, as the number is initial it allows you to delete.
Thanks,
Bala.

Similar Messages

I have an epson xp600 and a mac book pro. Wireless printing is OK if I'm lucky for one time only then a 'failed to connect' message so I have to delete and re add the printer to get it working again (but just once!) then the same occurs. Why?

I have an epson xp600 and a mac book pro. Wireless printing is OK if I'm lucky for one time only then a 'failed to connect' message so I have to delete and re add the printer to get it working again (but just once!) then the same occurs. Why?

I am not certain this will fix your problem but I suggest you assign the printer a static IP address.
Using the printer's front panel, select Menu > Network > WLAN > TCP/IP > Boot method, and change it to "static". Provide a static IP address that is on your LAN's subnet.
For example, if you are using an AirPort Extreme, you might give it an IP address of 10.0.1.100. If you are using a Netgear or Linksys router that defaults to issuing 192.168.x.x addresses, you might give it an address of 192.168.1.100. That way, the printer will always "reside at the same address" on your network. If your router has the ability, you should reserve that address so that the router does not attempt to assign it to another DHCP device.
Then, go to System Preferences > Print & Scan, and delete your existing printer with the "–" (minus) button. Add it again, using the "+" (plus) button. In the window that appears, select the IP pane, and from the Protocol menu select "Line Printer Daemon (LPD)". In the Address field type the IP address you gave your printer.
If all goes well the "Pring Using" field will detect the printer at that address and automatically select the appropriate driver. You will see something similar to the following screenshot ("name" can be whatever you decide, and "location" is optional):
Click Add, then you can close System Preferences.
There are other possible reasons your printer is "not responding" which could include wireless interference from competing wireless networks, but try this "static IP" method first. It should mitigate the problem.

Delete only one text message at a time w/o deleting entire conversation?

Does anyone know how to delete only one text message at a time without having to delete the entire conversation? The only two options I get are "clear conversation" or "cancel."
HP Windows XP

That's the same option I get too. It seems to me I recall seeing somewhere that you could delete individual messages in a thread but I don't remember where.
It seems silly to limit deletions to only the entire conversation since with most phones you can delete individual messages.

My time capsule is full and when I attempt to back up, I only receive a preparing back up message and the earliest and most recent back up dates remain the same. Why are the oldest backups not being deleted to make room for the newest backups?

My time capsule is full and when I attempt to back up, I only receive a preparing back up message and the earliest and most recent back up dates remain the same. Why are the oldest backups not being deleted to make room for the newest backups?

linda mariefromharper woods wrote:
My time capsule is full and when I attempt to back up, I only receive a preparing back up message and the earliest and most recent back up dates remain the same. Why are the oldest backups not being deleted to make room for the newest backups?
It may be in the process of making room. What version of OSX are you on? (That process can be excruciatingly slow on Leopard or Snow Leopard backups over a network; Lion has improved it greatly.)
A clue may be lurking in your logs. Use the widget in #A1 of Time Machine - Troubleshooting to display the backup messages from your logs. That should help you figure out what's going on. If in doubt, copy and post them here (but if the same ones repeat over and over, drop most of the duplicates).
If you can, connect via Ethernet; it will be 2-3 times faster.

Is it possible with iphone4 to delete only the last tel number called?

is it possible with iphone4 to delete only the last tel number called?

At the present, no...it's all or nothing.

Is it possible to lock a text message so it doesn't get deleted?

Is it possible to lock a text message so it doesn't accidentally get deleted?

No, sorry, but try this:
https://discussions.apple.com/message/21625263#21625263

MESSAGE ERROR: WIP a target cost only possible with Product Cost by Period

I work with orders assign to WBS Element (Non-valuated stock).
If I enter confirmation to an order created, and then execute KKAX transaction to calculate WIP, the system shows this error message u201Cu2018WIP a target cost only possible with Product Cost by Periodu2019u201D, but actually the result has been calculated ok.
If WIP is executed collectively KKAO the error message is the same but the result is not calculated
Everything suggests that what we want is possible, but the error doesnu2019t disappear
Does anyone know what could be reason for the error?
Thanks

Hi
Check your RA key and WIP customizing... WIP at target cost is possible only in Product cost by period
Check your settlement rule in Prod Order.. I guess it would be FUL and not PER.. FUL settlement means you are in product cost by order.. There seems to be a mismatch between your settlement type (FUL/PER) and WIP config
Moreover, if your stock is non valuated, do you at all need to calculate WIP for prod orders? I dont think so
Ajay M

Text maintenance only possible if you logon in original language message

Hi,
I am trying to change the descrption of a role in transaction PFCG and I am getting the following message "Text maintenance only possible if you logon in original language DE".
Can someone let me know what needs to be done.
Thanks

Hi Shiv,
Have you seen OSS note 854311...it may help you here.

Error message 'Display only possible for print documents'

Hi All,
This issue is with the transaction code ME21N. When the user clicks on PRINT PREVIEW it gives an error of 'Display only possible for print documents'. When the user clicks the MESSAGES tab and then COMMUNICATION METHOD tab it gives an error 'No communication data has been defined for transmission medium 6'. The vendor is not getting the order. Does anyone has any idea of what these error messages mean and where should I look further?
Thank you,
Regards,
Shanu

Hi
this seems tobe relates to print program "" ask your ABABer what program he has written to send the PO to vendor your problam willbe solved.
the moment you give the print it will ask the printer by default LP01 then print immediately check you need to do that.then beground print program and partner you need check. whether this out type you have assigned to this partner or not (vendor). check complecte condition technic.diffnettly it will works.
i hope you have understood
thanks &Regards

When deleting a user created folder from On My Mac in Mac Mail the sent messages that are part of conversations that reside there are not deleted, only the received mail gets deleted.

When deleting a user created folder from On My Mac in Mac Mail the sent messages that are part of conversations that reside there are not deleted, only the received mail gets deleted. Any way for both the received and sent mail that resides there to be deleted?
I create a lot of project folders where i keep all my conversations regarding the project. Once the project is finished i would like to just delete the folder and get rid of all the emails associated with it but when i delete the folder i've noticed that only received messages are deleted. Now I am stuck trying to sort through my sent folder for messages that were returned there after the conversations was supposedly deleted.

Mail/Preferences/Viewing - un-check include related messages, delete the folder, then go back and reset yo include.

"Initializing" message - possible to move/change?

While loading, the "Initializing" message appears dead center in the Xcelsius project area, requiring a minimal amount of web page content above the Xcelsius project. The web page where my most important Xcelsius application lives currently contains about 450 pixels of text (couple of paragraphs) above the Xcelsius application (1036W x 960H). As such, it is currently impossible to tell whether or not the Flash is actually loading until it is done. To make matters more challenging, the loading message is hard to notice and read on a white background due to its light grey color.
Is it possible there might be a way to edit the Initializing graphic? I hope I've overlooked a setting. Or failing that, will this limitation be addressed at some point?
As it is, it drastically limits the amount of page elements that can be placed above the application. Even if I were to trim some of the content above the Flash, the loading message would still sit very low on the page and would still be easy to miss. Right now this may be the single biggest issue for me.

>
Javier Jimenez wrote:
> I was able to reproduce the issue, however I found it to be highly dependent on canvas size and the size of the Slideshow component.
>
> Have you tried changing canvas size? Perhaps try that and see if it changes any of the truncations.
> You might also try change the size of the parent slideshow.
>
> Changing both of these, I've been able to change the truncation of titles in the child swf.
Javier,
Thanks for the response. When I first noticed the problem, the parent XLF had canvas dimensions that were about five pixels greater than the respective widths and heights of the Slide Show component. There was a visible space between the edges of the Slide Show component and the edges of the canvas. Likewise, the child XLF had about five to ten pixels between the edges of the canvas and the edges of the main background.
I have now resized the parent canvas to be about ten pixels greater on both sides, increasing even further the distance between the canvas edges and the Slide Show component edges, and saw no change.
I am reluctant to experiment further without knowing more about what you were seeing on your end. Can you be more specific about your test results? Thanks.

Posting only possible in periods 2002/03 and 2002/02 in company code 0001

All
This is in the ongoing sequence where I am creating everything from the scratch(customers, material, prices etc).So far, I have been able to create and save the salesorder>deliver it>pick the items and then I was going to carry out the PGI and then this happened.
when I use the date i.e(Planned GI) 27-09-2006, I receive the following error
****************snip********************
Goods movement: Error log
Item   Material           Description                                   Delivery qty UoM Batch
000010 9                  T-AS1_MATERIAL__9                                      10 PC
       E M7 053
       Posting only possible in periods 2002/03 and 2002/02 in company code 0001
************End snip*********************
If I use a date as R/3 wants ,say 27.02.2002(Planned GI),I get:-
"Picking date is after goods issue date"...which is obvious.
any day after 27-09-2006, say 28-09-2006(Planned GI), I get :-
"Goods issue date is later than delivery date"...makes sence too
one thing was clear here to me, I can only post in Feb/March 2002, while my delivery date is 27 Sept 2006 . So I am in a classic chicken-egg situation.
where and who is giving this "Posting only possible in periods 2002/03 and 2002/02 in company code 0001" message ? How can I override this thing from the past ?
I thought of playing it smart and change my system date to the year Feb. 2002 , but in the fear that a lot of other things will fall as a result of that, I did refrain from doing so.
Could someone make this PGI succesful for me
Thanks for any lessons.

Thanks Mr. Srinivas
MMPV was indeed the magic wand.
PGI was successful.
this is my overall document flow as of now :-
Standard Order 2                                27.09.06 Completed
. Outbound delivery 80000000                    27.09.06 Completed
.. WMS transfer order 1                         29.09.06 Completed
.. GD goods issue:delvy 4900000020              30.09.06 complete
.. Invoice 90000000                             30.09.06 Missing export data
As I understand, my invoicing is not yet complete , it's got a number and got saved, but how shall I get rid of that red line message "Missing export data"(foriegn trade data incomplete...was the message while saving the billing document).I would be darn happy if I could just get rid of the foreign data part completely(just want to complete the invoice).Would this be checking off a mandatory rqmt. somewhere in the master data?
and would this also be the reason, why I see no accounting document which should have been on status 'open' by now ?
Thanks in advance ,

List view status of flagged messages in Yosemite Mail Smart Folders

I'm using Mail in Yosemite with an Exchange server. Before Yosemite, everything was fine, now I have an issue with message flag status in Smart Folders. I have a Smart Folder which is my "ongoing" mail folder; it is set to only show unread and/or flagged messages. In the latest version of Mail, setting the messages flagged status does not change the flag icon in the message list, but does in the header of the actual mail message. The only way to get the flag to show up in the list is to select another folder and then reselect the smart folder. It does this on both my MacBook Pro and iMac, with with the latest Yosemite version and all updates applied.
In the previous OS X Mail (Mavericks) changing the flag status would remove/add the flag icon in the message list pane; now it doesn't. It's insanely annoying.
Anyone else seen this bug? I have tried recreating the smart folder and that makes no difference, neither has rebuilding the mailbox/deleting index/envelope file. No changes have been made to our Exchange server.
Cheers
Matthew

Well, I guess those are more "smart inboxes" and not "smart mailboxes" in iOS...

Using same Apple ID only possible fom one Computer?

I have searched here but i cant find an answer to this problem.
Is it only possible to log into the discussions from one computer with the same apple id?
After purchasing a new computer (Mac Mini) i find that i can log into discussions Only from the old Imac when i use this apple ID. I remember that i used to log into here from other computers here. But now its not possible.
When i try to log in from another Computer i always come into a registration window?
When i set up the new Mac Mini i did not create an Apple ID becaus i thought i could use the old one. So i consider this to be a feed back and a question for help at the same time!
Thank You!
Message was edited by: Alfi
Message was edited by: Alfi

Hi Alfi!
For each Mac you wish to log in with follow the directions posted below.
Log out of Discussions.
Delete the browser's Apple Cookies and clear the browser Cache.
Quit Safari.
Reopen Safari.
The following link is for illustration. Do not use this link to perform the procedure. If needed print these instructions to use as a guide.
On the Discussions Sign In Page the texts fields should be blank. Do not enter any info in the text fields.
Instead, under "Did you forget your password?" click on "Click here for assistance". Do not change your password.
On the page that opens, click on "Forget your Apple ID?".
Enter the required info, click Continue and complete the process.
If that doesn't correct the problem, Log-In to Your Info and determine if your Apple Account ID, contains any accent characters, such as an umlaut: ö, a grave: ò, or an acute: ó. (Å,å,Æ,æ,Ø,ø,ß)
If so replace the accented character and use an equivalent letter.
For example if there is a é present replace it with an e.
You can also select the appropriate document {Recover Apple ID name or password}, which is linked to in this KB Article Apple ID Support.
ali b

RAW+JPG, how can I delete only JPG ?

I have a lot of photos with the same name in two format: raw+jpg. Is it possible to delete only those jpg when photo is in raw+jpg ?
Regards

John Blaustein wrote:
Dorin,
Wouldn't it be easier to close LR and use a file manager (Windows Explorer or similar) to navigate to the folder containing the JPGs, select them all and delete them? This is assuming, of course, that the JPGs were not already imported into LR.
John
John, not really. I would also follow Dorins advice.
Because if you just delete the JPGs outside of LR, LRs catalog will still show a JPG as sidecar to the RAW (marked by RAW+JPG), This by itself might not be disturbing, but when you later try to move or delete such a RAW file from within LR, you get an error message saying your JPEG sidecar is missing.
Beat Gossweiler
Switzerland

Deletion only possible if status is initial Message no. NR621

Similar Messages

Maybe you are looking for