Deletion PDS in APO

Hi
Could some one throw light on how to delete PDS structures in APO.
I have PDS created on plant and vendor as well.I would like to delete the PDS at plants.
Tried with the standard report /SAPAPO/CULL_DELETE_RTO but it deletes the PDS on vendor locations but not on plant.
Then I tried with display PDS structures program where I could delete the rows but could not save the same.
Any inputs are higly appreciated.
Thanks & Regards
Chakravarthy.A

Hello Chakravarthy,
The PDS's cannot be deleted from the display transaction.
and the only way to delete them in APO is to use the standard report.
from R/3 you can delete the production versions which you want to delete & run the transaction CURTO_CREATE with the check box 'deletion flag' checked for the production versions which you deleted.
This will make sure that the PDS's are deleted in APO.
but, I do not understand why you are facing problem in deleting the PDSs in the plant also.
you can try entering both vendor and plant in the location input field and try.
Regards,
Hemanth

Similar Messages

  • Incorrect PDS in APO

    Dear All ,
    After CIFFED BOM and Routing from ERP, PDS is not showing ACTIVITY and OPERATION (APO-PPDS).
    It is only showing Components and Configuration.
    Can any body guide to correct the same??
    Regards,
    NS

    Hi Vipul ,
    I have Checked the folllowing
    1. Integration Model for Resource/Work center is active on ERP side
    2. Resource is created in APO and assigned to model 000
    3. All production version status in ECC are green
    I deleted the PDS IN APO (/SAPAPO/CULL_RTO_DEL ) and tried again to transfer using Curto_create.
    Message "Resource xxxxxxxx does not exist" appearing and no PDS generation in APO whereas the Resource is available in APO and also assigned to Model 000.
    It seems there is data inconsistency related to ECC and SCM and tried resolving using /SAPAPO/OM17 but no sucess.
    Can you please guide further now??
    Thanks ..
    NS

  • Deleting PPMs from APO

    Hi all -
    Whats the best way to clear the obsolete PPMs from APO? Can it be done only through BAPIs/program/manually as suggested in some earlier posts?
    Is there anyway we can make the system remove the obsolete ppms from APO?
    Currently we just lock the PVs in R/3 and they change to inactive in APO and thats fine. At this point no matter what I do, since the valid from/to date is in the past, the system obviosuly does not even read them.
    How do we get rid of old ppms from APO?  Appreciate all your help!
    Varun

    Thanks for the reply. So, is there no way to set an indicator on PV or on the R/3 side so that the CIF master data update job of PPM deletes it from APO?
    Thanks for your answers
    Varun

  • Unable to update PDS to APO

    Hi all,
    I want to CIF PDS to APO. But i tray many times. I use CF1 and RIMODINI also.
    but no use. anyone can help me in this matter.
    regards
    subhash waydande

    Hi Subhash,
    Pls check the CIF application log to see details of CIF queue failures.
    also check for below checkpoints.
    Have you transferred the product-location combination?
    Have you transferred the resources used in routing/recipe ?
    Do the operations in routing have >0 machine time?
    Are relevant material , resource integration model active?
    Is production version checked and maintained?
    Regards,
    Vinay

  • Master recipes operations not getting transfered in SNP PDS to APO from R3

    Hello APO Gurus,
    I am trying to transfer SNP PDS for master receipes from R3 to APO.
    Issue description::
    The operation is not getting transfered correctly , some system default operation "010 generated Operation (from Planned Delive)" is getting generated in APO, also activity and resource capacity is not getting transfered. This situation exist for one plant 1000, for other plant 1100 the SNP PDS created correctly.
    i have following points:
    1. Is there some customizing setting missing on R3 or APO side  for plant 1000 tbefore SNP PDS transfer
    2. What need to be checked on master recipes data in R3,
    i have checked on below points
    1. FG Materials and all the Component Material to be in APO in a Active Integration Model.
    2. BOM & Routing and Production Version setup correctly.
    3. The Routing Operations have to Relevant to 'SCHEDULING'.
    4. Try deleting the existing Integration model for materials & re-create new IM & activate.
    Please help me to send SNP PDS correctly to APO to take heuristic run.
    Regards
    Gajendra
    Edited by: Gajendra_APO on Aug 23, 2011 1:14 PM

    Hi,
    It is good that you have given your already checked points.
    Please check the following things also and try to retransfer the PDS.
    1. Check your resource in ECC, whether you have maintained the Process formula.
    2. Check you have maintained some values in Master Recipe for processing time
    3. Check whether the resource has been transferred for your plant 1000 to APO and an active IM exists.
    4. Also check the type of the resource transferred to APO. It should be a single-mixed/ multi-mixed or bucket resource.
    Hope this will help you to solve the issue.
    Regards,
    Manimaran M.

  • Delete Intransit from APO which Loaded by PI from external interface

    Hi all,
    I am facinf a problem in deleting the Order created by External Interface.
    We are loading Inransit as PO Mamo (ATP Category AH). Now we need to delete all the Record with AH ATP categoy before we reload new intransit to APO.
    Problem is we are not able to delete those order as those are not in Live Cache.
    We try using transaction /n/sapapo/bp2 but every time its throwing error "SAP APO system Q51CLNT100 has been declared as an SAP R/3 system.
    and even i try deleting from /SAPAPO/RLCDEL. but its not deleting those order.
    Can some one suggest what to do.
    What all the option that we can try to delete the intransit.
    Thanks & Regards,
    Amit Sharma

    Hi Amit,
    You can use BAPI to delete AH ATP Category.
    1. Read all Purchase Documents from BAPI_POSRVAPS_GETLIST3 for product u2013 location for AH Type ATP Category only.
    2.Get the ORDID on the selection made.
    3.Call BAPI_POSRVAPS_REMOVEITEMS and load the list of order no. and then delete it.
    Please try this.
    Thanks,
    Dipankar

  • Runtime Error 'ITAB_DUPLICATE_KEY' while deleting PDS

    Hi All,
    The functional user is trying to delete the PDS with the tx '/N//SAPAPO/CULL_RTO_DEL'
    PDS = PPDS
    PLN VERSIONS = 'DELETE ACROSS ALL MODULES'
    MASTER DATA TYPE = iPPE
    WE ARE ON =  SCM 5.0 SR2 SPS13 + ORACLE 10g + AIX 5.3 [with ALL LATEST KERNAL PATCHES, SP, etc]
    Error analysis
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        An entry was to be entered into the table
         "\CLASS=/SAPAPO/CL_CULL_DELETE_RTO\DATA=GS_DELRTO_BUFFER_PPE-OLDEST_ORDERS"
         (which should have
        had a unique table key (UNIQUE KEY)).
        However, there already existed a line with an identical key.
        The insert-operation could have ocurred as a result of an INSERT- or
        MOVE command, or in conjunction with a SELECT ... INTO.
        The statement "INSERT INITIAL LINE ..." cannot be used to insert several
         initial lines into a table with a unique key.
    Information on where terminated
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        Termination occurred in the ABAP program "/SAPAPO/CL_CULL_DELETE_RTO====CP" -
         in METHOD "INSERT_SATID_ORDERS".
        The main program was "/SAPAPO/CULL_DELETE_RTO ".
        In the source code you have the termination point in line 40
        of the (Include) program "/SAPAPO/CURTO_SERVICEI16".
    I have implemented a note - 1360600 for PDS DEL Memory related issues.
    I have checked the SAP notes and could not got the fix.
    Please help and suggest a fix soon.
    Regards,
    Shyamsundar G C
    Cell Ph #: +91 96233-08388

    Hi Senthil,
    Thanks for the reply, i checked the notes.
    For the note 494717, the affected release software component and our existing release does not match [ PI 2001_2_46C and 2006_1_700].
    For the note 1358336, the affected release software component 'SAP_APPL Logistics and Accounting' is for ECC system and not SCM system.
    We have implemented the Note 1360600, which is related to PDS [its memory issue related to PDS generate]
    And i guess the PDS deletion issue started after the note 1360600 implementation.
    Regards,
    Shyamsundar G C

  • Not able to delete orders in APO

    Dear Sir,
    We are facing problem during deletion of certain Purchase-Orders and Production-Orders in APO . Before deleting the Orders , we had first deactivated the Integration Model of the reference Material in R3 .
    During the Dletion in APO (using Tcode RRP4) , we are getting the error message as below...
    No valid orders selected for deletion
    Message no. /SAPAPO/RRP246
    We would like to mention that Pp_Firmed is appearing as Ticked against these  reference Orders .
    We request SAP experts to kindly guide us as what steps need to be followed for deleting these Orders in APO .
    With Thanks and Regards
    Soha

    Hi,
    You can follow these steps to delete any inconsistent orders or you can use /SAPAPO/DELETE_PP_ORDER
    1. Goto /SAPAPO/RRP3 for the product and loc combinations.
    2. Enter gt_io in the area where you are entering tcode.
    3. Find out the internal order no and copy this internal number.
    4.Go to SA38 or se38.
    5.Enter the program /SAPAPO/OM_DELETE_INCON_ORDERS.
    6. enter the internal order number and planning version.
    7.select the check box delete order object.
    8.execute.
    Now these orders should be deleted.
    Thanks,
    nandha

  • Production Version in R/3 & PDS in APO

    Hi Team,
    I have below master data settings in R/3:
    1. Material Master
    2. BOM
    Note:
    I do not have work center & routing in R/3. I have set the default operation for my order type in OPJG.
    But as per system landscape, the planning will be performed in APO. Hence i need to CIF the production version to APO from R/3. But i do not have routing in R/3. Is it possible to create the production version without routing (in R/3)?
    Thanks

    Yes, It can be transferred. You need to create CIF integration model(CFM1) with "BOM" option selected.
    SAP Help says following -
    Material BOM in Integration Model
    If you set this indicator, all bills of material that correspond to the
    stated selection options are indcluded in your model.
    Dependencies
    The material BOM filter object can only be used in connection with the
    production data structure (iPPE) and it is used to map phantom assemblies.
    Only those bills of material are transferred for materials for which no
    production production versions have been created.
    Hope this will help.
    Thank you
    Satish Waghmare

  • Order category BF not getting deleted in APO

    Hi Experts,
    I have a situation where the material is already deleted in ECC (hence no longer existing), but the product is existing in APO and we need to delete this in APO. To do this, we need to delete the dependent orders for that product/location first and then other dependencies.
    There are few orders for the prod/loc as confirmed purchase orders (ord cat BF). These orders are now PP/DS orders with status as PP firmed, output firmed and date fixed.
    I have tried the two programs- /sapapo/rlcdelete and /sapapo/delete_pp_order, but system is not picking up the orders to delete.
    The system shows as message as " No deletion of converted orders in active version"
    As I said earlier, the product is no longer existing in ECC, hence I can not delete the orders from there.
    Is there any other way to achieve this? Is there any BADI to do this in APO?
    Regards
    Manotosh

    Hi
    You can use /SAPAPO/DELETE_PP_ORDER report for deleting these orders.
    Execute the this report, mention all the products for which you want to delete the order and execute it. It might give the message as orders will not get deleted as inactive in APO.
    Go back please enter as DEL_EXECU, in the place where we use to enter the T-codes and enter and than again execute the report. It will delete the orders.
    You can also try /SAPAPO/SDORDER_DEL report.
    Thanks
    Amol

  • PO Deletion in APO

    Dear All,
    Could someone please guide me regarding how to delete the PO created by TLB in APO which has not yet got CIFFed to R/3. Is there a BAPI for the same(DeleteMultiple) - or some other alternate way?
    regards
    Sudhir

    Hi Gulati,
                   I am not that experienced in SNP or TLB. Just for my knowledge, can you tell me why you want to delete POs in APO? I think they are in ECC at the same time and doesn't deleting them in APO create any problem? Can you just tell me the business case?
    Thanks.

  • CIF integration of characteristics that were deleted at APO

    Hi Experts,
    we had some characteristics in APO that were transfered from the ECC. But since it was no longer used they were deleted at the APO system. But now we need to use againd some of these characteristics, and when we try to integrate this characteristic they stopped at the APO inbond queue whith the message "master data missing for characteristic &&".
    I checked the table TCL_ATINN_IDENT in APO and the characteristics that were deleted in the past are still there but with an internal number at the field ATINN_NEW.
    Does anyone knows how can we proced with this issue?
    Is there any report to clean this data in the table?
    thanks in advance
    Thiago Cyrillo

    Ok, I"ll try to explain this issue.
    1 - We had a class (type 300) with some characteristics in ECC that were integrated with APO;
    2 - When this class (type 300 and 400 in APO) and characteristcs were not used anymore in APO, they were deleted (classes and characteristics);
    3 - But today we need to use these characteristic again.
    4 - We have some classes (type 300) that is integrated with APO. These classes has the organizational Area M that is created in ECC and APO;
    5 - Those characteristics that were deleted from APO, is now in attributed at the new classes that are integrated with APO;
    6 - To Integrate those characteristic we put the organizational area M in them at the related classes;
    7 - After that those characterist stop at the APO (inboud Queue SMQ2).
    Let me know if you could replicate the issue
    thanks and Best Regards
    Thiago Cyrillo

  • How we define Supplier constraints in SAP APO SNP?

    Hi
    Customer is trading company and SNP optimizer is configured  for sourcing optimization,Following are queries
    How we can define Supplier constraints? Supplier constraints meaning Supplier is capable of supplying 5000MT  how we model this and Minimum purchase need to happen from certain suppliers of quantity 2000MT,basically Quantity constraints need to be built in SAP APO SNP.
    expecting some valuable inputs
    Thanks
    Poorna

    Hi Poorna,
    Please follow below steps to delete Product-Location combinations in APO:
    1. In ECC, deactivate Integration model for Transaction data and master data of the Products and locations to be deleted from APO.
    2. Check where used list from transaction WUF and delete dependent transaction data and Master data from APO. You may use /sapapo/rlcdelete and /sapapo/sdorder_del.
    Also delete dependent Master data objects like CVC, PPM, Transportation lane, PDS etc. from APO
    Ensure deletion of transaction data in all existing versions in the 000 Model.
    3. Set the deletion flag for Product / Product-Location combination using transaction /sapapo/mat1
    4. Once the transaction data & related master data is deleted and deletion flag is set, it is possible to delete the location-products by running the report /sapapo/delete_products
    To delete Locations from APO:
    Follow same steps as above. In cases of deletion of Locations, all products in that location should be deleted using the Product-Location deletion flag optionJust change the report in step 4. For locations, use report /sapapo/delete_locations
    To answer your other question on change in location type, I think it is not possible to change once you CIF location master to APO.
    Regards,
    Ravi

  • Can we use SNP PDS in Multi level ATP ?

    Hi All,
    We do CTM planning with existing SNP PDS In APO and now we want to explore to use the Multi level ATP functionality for GATP.  I know, MATP can create the ATP trees if the stock is not available and these can be converted into PPDS order.
    My question is, can we use SNP PDS for this purpose?
    Thanks,
    Abhilasha

    Hi Abhilasha,
    There is no such specific mention anywhere in the literature that you cannot use SNP PDS for MATP. The only downside to using SNP PDS is that SNP PDS are meant for mid to long term planning and the activities/operations in SNP PDS are usually not in detail i.e only important activities or bottle neck components are usually used which will not always facilitate detailed scheduling.
    On the other hand MATP creates ATP tree structures by plan exlosion(which can be SNP/PDS) and saves the requirements groups(component requirements of header level) with dates/qts and source of supply. It uses PPDS component to convert these ATP tree structures into PPDS planned orders depending on the conversion horizon/requirements dates. It does that by reading the source of supply, requirements dates and quantities from ATP tree structure and by plan explosion.
    When MATP planned orders are created you should no longer plan them with automatic planning run as that will cause re-explosion of the plan and might cause incorrect down stream requirements if you had had substitutions at component leve during MATP check. In planned orders, you have an option of changing the allowed sources of supply (in source of supply section). But for orders created by MATP, you will not be allowed to change the source of supply field from SNP PDS to PPDS PDS in the planned order because it will re-explode the plan. So you can decide for yourself if you can use SNP PDS as source of supply for PPDS planned orders.
    Hope that answers your question.
    Regards,
    Mohan

  • When I create a Planned order using PDS, the Setup time is coming as 0.

    We have been using PPMs for a long time, and now we are trying to migrate to PDS.
    We are currently in SCM 7.0.
    I successfully created the PDS in APO (using CIF from R/3). In the PDS (in APO), for a particular activity, I see the  activity type is "S", and the Activity Duratiion (Fixed) is 43,200 Seconds.
    However, when I create a planned order using this PDS, the activity time is zero (End time = Start Time).
    When we use the PPM the setup time comes correctly.
    Any help will be appreciated..

    Senthil,
    Thanks for your views.
    I have checked all that you have suggested, and it is okay. The issue still persists.
    One thing that I noticed was that it is working fine in the old SCM 5.0 environment - the setup time is coming correctly in the planned order.
    However, we have this issue in the new SCM 7.0 environment. Is there something that is different in SCM 7.0 in terms order explosion ?
    Reagrds,
    Sastry

Maybe you are looking for