Deletion problem in customer

Dear Sapgurus,
i create one customer master, after i post 4 relevent customer transaction, again i want to delete master and transaction data in customer master.
Regards
Raju

Hi,
Remove Company Code Productive Check Box inn T.Code: OBY6 & Execute Below T.Codes.
1 - OBR1 Reset Transaction Data
2 - OBR2 Reset Master Data
Regards,
Viswa

Similar Messages

PROBLEM IN CUSTOM IDOC CREATION

Hi Friends,
                I'm facing a problem in custom idoc creation plz try to assist me
1.As per the information i have i'm creating segment in we31
for cremas01 idoc.But when i enter the name for segment i'm getting message "Name range Voilation particular name which i had given is not permitted in customer system?
Plz clarify this,and are there any formalities which i should look for before creating custom idoc?
Good answers will be rewarded.
                                                                          Regards,
                                                                           Vinod.

The Problem might be.... with the naming of the segment.
Standard segments should be created with 'E1' and all the custom segments are created using 'Z1' and the name with 8 characters long only is permitted.
Reward Points if useful.

Problem with custom paper size on dot matrix printer

Hi All,
I'm using CR2008 with updated to SP2. I have a problem with custom paper size (W=21; H=14), the CR Viewer show report with custom paper size correctly but when I print it to a dot matrix printer (Epson LQ 300+) the content was rotated to landscape. If print to a laser printer the content was printed correctly. My report was printed correctly by CR10 or previous versions I got this issue when upgraded to CR2008. I aslo tested my computer and printer with orther application like MS Word the printing have no problem with custom paper size.
Thanks for any advice for me.
Han

Looking at the Epson LQ 300+ driver, I see that the latest update is from 2002. In my experience, most matrix printer drivers are not unicode. Crystal Reports is designed to only work with unicode printer drivers. See the [How Printer Driver Options Affect a Report|https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/a09051e9-721e-2b10-11b6-f9c65c64ef29&overridelayout=true] article, page 6 for details. Also, see [this|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_dev/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] note.
Finally, see if you can print from the CR designer to this printer and if you get the correct results here.
Ludek

Two Related (?) file deleting problems in Finder and Time Machnine

My internal drive is partition into two volumes. In the second one (the "non-boot" one), I was have trouble putting files in the trash that were locked. As I was tracking that down I coincidentally(?) started having another problem.
I started getting a message that the files being put into the trash must be deleted immediately. I check permissions and I had read/write Privileges in the user account I'm normally logged into. However, If I logged into my administrator account, I could put things in the trash without deleting them. I noticed that ignore ownerships wasn't checked, so I checked that.
That allowed my to put files into the trash without immediately deleting them. I went ahead and deleted the files I wanted to get rid of. However, I'm wondering if there was another issue because I am lead to understand that the ownership privileges shouldn't have necessitated checking "ignore ownerships"?
Also, I had trouble deleting the backups of those files and folders in time machine. I can delete most of it. But for one folder (and all the folders in which it resides in the hierarchy) I can't deleted it. I tell it to delete backups of that folder (or folders it is in), I put in the password, and goes "ding". But nothing disappears...
(After I wrote this, I tried unchecking "ignore ownerships" and the problem did not reappear. I can still put files in the trash without the immediate deletion problem.)
Message was edited by: davidpsummers
Message was edited by: davidpsummers

Pondini wrote:
davidpsummers wrote:
Also, I had trouble deleting the backups of those files and folders in time machine. I can delete most of it. But for one folder (and all the folders in which it resides in the hierarchy) I can't deleted it. I tell it to delete backups of that folder (or folders it is in), I put in the password, and goes "ding". But nothing disappears...
Are you doing that via the Finder or Terminal? If so, that's not the way to delete backups. See #12 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum).
And now I'm getting an error in time machine. "Files can't be copied onto the backup disk because it appears to be "read only"". I do get info on the disk, and my account has Read & Write privleges, but it say "You can only read" above that".
The Finder or Terminal deletions may have corrupted your backups. Repair them, per #A5 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum).
Message was edited by: Pondini
I'm doing the deletion through Time Machine (I go into Time Machine, find the folder in the backup, and ask Time machine to delete all backups of that folder).
I did find the tip of unmounting the disk, rebooting, and remounting it. That Stopped messages about the disk being read only. However, the folder still doesn't delete. I'm also a bit worried about these being symptoms of some other problem...
Message was edited by: davidpsummers

Problem with Customer Interaction Module in Web Channel Builder

Hello Everyone,
Facing an issue with Web Channel Builder Customer Interaction Module.
In Web channel builder we have done all the required configuration changes, but still we are not able to get the reviews and rating part in the product detail page.
We have created a new application and all the other module are working fine ,but the only module that is causing problem is Customer Interaction module. Every time we are activating this module rest modules stops working.
Can anyone please let us know what could be the root cause of this problem.
Are there any setting that has to be done ...that we are missing in?
I have studied that Product Catalogue is integrated with this module. Are there any setting that are to be done in the Product Catalogue module in Web channel builder?
Thanks in advance!
Regards,
PB

Hi PB,
Did you please get any proper error / exception in log file? Did you please check the web.xml as well that there is no same application name defined.
Can you please also copy paste the log please.
Thanks,
Hamendra

Deletion of Reference customer in CRM

Hi all,
How do i delete a reference Customer in CRM?
the Reference customer numbers in R/3 and CRM are different.
We are basically up loading the master data from R/3 to CRM so that the number ranges should be identical.
can any help in this regard?
thanks in advance.
R,
mdvsapcrm.

Hello R,
Once a reference customer is assigned, it cannot be changed or deleted via the Function Module BUP_BUPA_DELETE or via transaction CRMC_BUPA_CONSUM.
If you do not have any consumers assigned, it is possible to directly delete the reference business partner from the table CRMC_BUPA_CONSUM.
If there were consumers assigned, you could change the attributes of original business partner as opposed to changing the reference customer and assigning a new business partner.
Note that a reference business partner is also mainatained in ERP (transaction VD07).
Rather test this carefully.
Good luck, Sascha

Deleting or Editing Custom Labels used to identify phone numbers

I want to delete or edit "custom labels" that I set up to better describe phone numbers in my contacts. How do I do this?

Sure.
In "Edit" mode in the Contacts App, for any Contact, just tap on a label, scroll to the bottom where you will see "Add Custom Label"

SDB - delete problem/solution

Hi Experts.
Is it possible to delete problem/solution from solution database? There is information in help that it is not possible to delete problem/solution, but that they can be archived.. But note 946030 says it is not available...
Regards
Piotr

Hello Piotr,
In version 4 it was released one note (730402) that allow us to delete some symptoms and solutions. However, this may lead into some inconsistencies if they're linked with documents. We've never tried to execute it.... but if this may help you, try it
Kind regards,
Bruno

Deleting a potential customer record from SAP

Hello
Does anyone know how to delete a potential customer that has been created in SAP. As once you have created it, if you dont transfer it into a proper customer record, then the potential customer record will sit there is SAP. This then takes up space. So I wanted to know whether there is a way deleting the potential record.
Thanks
Bindi

Hello
A potential customer is one that has been created and their account group is set to 'Potential Customer'. This means at this stage that no transaction can be carried out against the customer as they have not been transfer into a proper customer account. A credit check, etc is then carried out on the customer, and if successful then customers account group is changed from 'Potential Customer' to 'Sold to Party' for example. However if the record is not transfered and is still in the system as a Potential Customer then we need to be able to remove these.
Is there way to delete these. I tried the above methods however was not successful.
Regards
Bindi

Problems with Custom Paper Size and Address Book

I'm having some trouble printing from Address Book onto a custom paper size. I'm attempting to set up a notecard, and only print one at a time, rather than multiple columns as in the Labels option. The trouble is that when creating this small size, Address Book doesn't recognize it as anything other than a regular sheet of US Letter, and thus prints the address in the middle of the page.
I have no problem printing envelopes, though, which seems odd because they too go in the manual feed for my printer. The notecards are similar width to the envelopes, but only about half the length.
Has anyone else experienced problems with custom paper sizes printing improperly? I'm using an HP 4515 LaserJet, but have access to a few other laser printers. Thanks for any insight

I have had the same problem, and with the same result; Adobe Tech Support can't help or fix, after 15 hours on phone, Level 2 support. It is a software bug Adobe has, and can't seem to fix. I just upgraded to Lightroom CC, and my problem migrated with the upgrade. I print in Photoshop fine.
If you found an answer, I would appreciate knowing how to do it!
Thanks

Problems with custom buttons

I have problems with custom buttons in Captivate 5. The button is not switching from the _up stage to _over stage, but when I click on it the _down stage works fine. It is not a problem with the naming of the buttons. They are all with the same name and in lower case. I have tried with various custom buttons and the problem is the same. There is no problems with the standard buttons from the Adobe Gallery, so it is a bit strange, also strange that it is only the _over stage that causes problems.
The buttons I have made in Adobe Illustrator. Have tried both exporting in png and bmp format. It is the same problem.
Hope someone has some idea as to what can be wrong.

Hi Manish,
I have uploaded the zip file with the button files to Acrobat and mailed you the link.
Look forward to hear if you find a reason or more importantly a solution :-)
Kind regards
Rene

Critical problem with deleting templates from custom MPs

Hello,
I created several management packs with classes inherited from SR, RA, MA and with forms, did manual change (type projections, references), made bundle and imported MPs, tested it, all works good, BUT if I try to delete RA or MA from SR I see
an error, also If I try to delete entire SR template I see an error:
Cannot locate 1|SR_Workplace|1.0.0.0|Template.2d91857973454892beb3df01a97aa68d||.
Cannot find ManagementPackElement [Type=ManagementPackObjectTemplate, ID=Template.2d91857973454892beb3df01a97aa68d] in management pack ManagementPack:[Name=SR_Workplace, KeyToken=, Version=1.0.0.3].
So I can create templates and cannot delete it in the Templates view, how to solve it???
If I try to delete RA and MA template from SR I see 44 errors:
: Verification failed with 44 errors:
Error 1:
Found error in 1|SR_Workplace|1.0.0.0|Offering10efc13c0d6f45009263ecc8a0d9c1f2/GeneratedId_PresentationMappingTemplate0/GeneratedId_Sources0/GeneratedId_Source1/GeneratedId_Targets0/GeneratedId_Target1|4|RequestOffering/PresentationMappingTemplate/Sources/Source/Targets/Target
with message:
Invalid Presentation Mapping Template. The path is not found in the target template.
and more with same message

You need to delete the Request Offering(s) based on this Service Request template. That is what it is complaining about.
http://codebeaver.blogspot.dk/

Unable to delete photo from custom albums.

Hello, I am new to ios programming.
I have suceeded in creating a custom album in user's photo library by using the sample code from this here "http://www.touch-code-magazine.com/ios5-saving-photos-in-custom-photo-album-cate gory-for-download/". Now I want to provide a facility to delete images from the custom album from my app. I tried using the code given below:
I am able to get the asset url of the image and even the image's original name, but it does not seem to delete the image. - (void)removeImage:(NSString*)fileName { NSFileManager *fileManager = [NSFileManager defaultManager]; NSArray *paths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES); NSString *documentsDirectory = [paths objectAtIndex:0]; NSString *fullPath = [documentsDirectory stringByAppendingPathComponent:[NSString stringWithFormat:@"%@.png", fileName]]; [fileManager removeItemAtPath: fullPath error:NULL]; NSLog(@"image removed"); }
Please let me know what I am doing wrong, or there is something else which I am missing?
Thanks,
Laxmilal Menaria

OK. Could you be more SPECIFIC and add some details. WHERE is the tab you mentioned?
I have the same problem mentioned above and have tried several different approaches, all to no avail. I can select the photos in in Collections and Moments, but the trash can icon turns grey and I cannot DO anything with them after I select them, other than share them with something/someone else.

Problem with customer open items. Transaction FBL5N and F-30

Hi all,
I have a little problem with a customer.
When I see transaction FBL5N, I can see 3 open items, but, when I go to clear then in F-30, no appears.
Anybody can help me.
Thanks in advance

Hi all,
I have solved the problem
The problem was that exits a proposal where these open items were.
I have deleted this proposal, and then, I could create a post with clearing.
Thanks everybody

Flag deletion date for customer

Hello All,
I have a requirement to get the flag deletion date for a customer on a sales organization level in a report, maintained in XD03/VD03 -
Have written the below code.
The problem with this is that the date is not fetched sometimes for a particular sales org.
Could anybody suggest?
Regards
Varsha

yes there is a field which stores the last date for a customer transaction
Regards
PS: Be clear in your question.

Deletion problem in customer

Similar Messages

Maybe you are looking for