Deletion service sessions

Hi,
I am trying to delete a Security Optimization Self Service session in SOLMAN 3.2, but I am getting the following error message:
"SEC_SELF - No. 1500000000021 could not be deleted - because of your status"
Any idea what the problem is?

Hi Ragu,
Sadly there are no long text message.
When trying to delete the service in RDSMOPREDUCEDATA I get the error "Session must not be changed". I have been looking at note 949749, but I could not implement it via SNOTE and I cannot increase the supportpackage level, since it is only kernel 6.20.
I have no idea what to do.

Similar Messages

Create New Service Session at Solution Manager = Product System missing

We have installed SAP EHP 1 for SAP Solution Manager 7.0 last year but not really use it.
We have setup in the system landscape:
Server (ecc6sbx)
Databases (MCD)
Product System (MCD) => SAP ERP
Assigned them to logical component (eg ZECC6DEV)
RFC destination for MCD was generated
SDCCN Administration at solutions manager display MCD with SDCCN status in green color.
At the satellite system MCD, SDCCN Maintenance job was created and scheduled. Initial single run was also done.
There were no issue. Connection to SDCC_OSS was fine.
Back to the SOLUTION_MANAGER transaction, we created a new solution ECC ERP - Development.
In the Solution Landscape => Solution Settings, we have assigned the Logical Component into the System Group.
However when we expand the tree, and click on the Servers folder it did not display anything.
Click on the Product Systems also did not display anything.
We have another Solution Manager which display information on those Servers and Product Systems folder for satellite system.
Going back to the Solution Manager for the Solution ECC ERP - Development, I tried to Create New Service Session for EarlyWatch Alert. When I click on the Create button, I could only see SAP EarlyWatch Alert for Solutions, there is no SAP EarlyWatch Alert for the Reference Object MCD (<installation number). I could not create a session for MCD.
Does anyone have ideas what I am missing here? I am trying to attached a document which have print screen for reference while creating this message, but there is no such function here.
Adding to link to the document file contain print screen
[Wihtout System and EarlyWatch Selectable.doc|http://www.easy-share.com/1915633524/Wihtout System and EarlyWatch Selectable.doc]
[With System and EarlyWatch.doc|http://www.easy-share.com/1915633514/With System and EarlyWatch.doc]
Edited by: Steven Foo on May 24, 2011 8:00 AM
Edited by: Steven Foo on May 24, 2011 8:18 AM

Anyway, in the solution manger how to we setup earlywatch alert for the SM SID host itself (source system)?
I have the information on the below from our solution manger
The data for this session is overdue. Data has not yet been transferred from the associated satellite system.
Go to the Service Data Control Center (transaction SDCCN) in the satellite system and check why the data has not been sent.
Typical sources of errors are:
The RFC connection for the SAP Solution Manager system is not working.
The 'Task Processor' background job, which collects the session data, has been changed.
Problems arose while data was being collected (see the detail log for the task that collects the session data).
A periodic 'SDCC Maintenance Package' task has not been scheduled to check whether your SAP Solution Manager system requests session data.
I tried to go SDCCN on the solution manager itself and look at the Maintenance Service Definitions:
I get the information:
No suitable RFC Destination found in SDCCN settings.
When I click ok I get the following
No RFC destionation to source system of service definitions available
Delete Service Definitions (radio button selected).
I did not continue and cancel it as I did not want to delete anything.
I check the Task Processor background job is running at SM host itself.
I managed to get the Maintenance Package job running. However it failed with the following
Error refreshing service definitions from destination SM_SSMCLNT001_BACK
Source and target system may not be identical SSM
The source and target system is the same ==> SSM, will this be an issue?

Com.sap.tc.webdynpro.services.session.LockExceptio

Hi,
From my WD Java application, i'm calling some URL and displaying the content from that in my WD application.
The performance of this is very slow and it seems to be hang for some time.
Portal version is 7.0 and patch is SP 18.
When i checked the log it throws an exception :
com.sap.tc.webdynpro.sessionmanagement#sap.com/tcwddispwda#com.sap.tc.webdynpro.sessionmanagement.ExceptionHandler.handleThrowable#psaxena#177552##n/a##4b50da90170c11de857c00145e23c9af#SAPEngine_Application_Thread[impl:3]_20##0#0#Error#1#/System/UserInterface#Java###Exception occured during processing of Web Dynpro application . The causing exception is nested.
[EXCEPTION]
#2#sap.com/pb/PageBuilder#com.sap.tc.webdynpro.services.session.LockException: Thread SAPEngine_Application_Thread[impl:3]_20 failed to acquire exclusive lock on client session ClientSession(id=(J2EE12791800)ID1709694850DB02709529586100848222End_5108164). Existing locks: LockingManager(ThreadName:SAPEngine_Application_Thread[impl:3]_20, exclusive client session lock: ClientSessionLock(SAPEngine_Application_Thread[impl:3]_30), shared client session locks: ClientSessionSharedLockManager([]), app session locks: ApplicationSessionLockManager([]), current request: sap.com/pb/PageBuilder).Hint: Take a thread dump of the server node to find the blocking thread that causes the problem.
     at com.sap.tc.webdynpro.clientserver.session.ClientSession$LockingManager.lock(ClientSession.java:1511)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:233)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
Any idea why this problem is coming and what is the solution for this.
Thanks and Regards
Puneet

Hi Puneet,
I am getting same exception in using FileDownload UI element as a Table Cell Editor.
I am loading input stream in FileDownload UI element on demand (that when user actually clicks on download link)
Can you please share what exact optimization you did in code and it worked for you?
Please help me with this issue.
Awaiting for your reply.
Thanks and regards,
Amey Mogare

Printing to a Deskjet 1000 from a terminal services session (2003) on my XP laptop.

The printer is a CH340-64001 and it works fine on an XP laptop. When an attempt is made to use it during a terminal services session it fails because Server 2003 does not have the drivers for the printer.
When I try to run the installation from the CD I get a message that the operating system is not compatible.
Is there any way to install the XP drivers to Server 2003 or does the printer need to be replaced with another model?

There isn't a way, that I know of, to get the printer's XP drivers to work with Server 2008. However, there is an alternate driver that you can try using. It's the Deskjet 990c driver. It's a generic inkjet driver that works with most inkjet printers. It should work with the printer you're using. That's really the only thing I can think of that might work.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

WEB Service Session - Login

Hello Experts,
I have to consume a BOBJ Web Service Session in SAP Netweawer.
Hello,
We have SAP NetWeaver 2004s and BusinessObjects Enterprise 12.0.
I've created an proxy object on the SAP Netweaver side in the following way :
se80->Create->Enterprice Service->Service-Consumer->URL/HTTP Destination-> URL = http://<host>:8080/dswsbobje/services/Session?wsdl
Then I've created an Port using soamanager.
I't seems to be working, becouse methods like : getServerInfo, getServerInfoDetails are working ok.
Now I have a problem with the method Login. As parameter for this method I see only structure CREDENTIAL, which have only one field CONTROLLER (PRXCTRLTAB).
I've expected to have in the Parameters for this method a structure EnterpriceCredential with fields like username, password and so on - but its not.
Could You help me ?
Greetings
Wojciech
Here my coding :
REPORT ztest.
DATA text TYPE string.
DATA : lr_proxy TYPE REF TO zsco_session_port. " its my session proxy object
DATA : oref   TYPE REF TO cx_root.
TRY.
    CREATE OBJECT lr_proxy
      EXPORTING
        logical_port_name = 'LP1'.
CATCH cx_ai_system_fault INTO oref.
    text = oref->get_text( ).
ENDTRY.
DATA get_server_info_in TYPE zsget_server_info_soap_in.
DATA get_server_info_out TYPE zsget_server_info_soap_out.
THIS IS WORKING WELL
TRY.
    CALL METHOD lr_proxy->get_server_info
      EXPORTING
        input = get_server_info_in
      IMPORTING
        output = get_server_info_out.
CATCH cx_ai_system_fault INTO oref..
CATCH zscx_dswsexception INTO oref..
CATCH cx_ai_application_fault INTO oref..
ENDTRY.
break-point.
AND THIS IS ENDINNG WITH EXCEPTION
TRY.
    CALL METHOD lr_proxy->login
      EXPORTING
        input = login_in
      IMPORTING
        output = login_out.
CATCH cx_ai_system_fault INTO oref.
    text = oref->get_text( ).
_ CATCH zscx_dswsexception INTO oref.   this exeption is being called_
    text = oref->get_text( ).
CATCH cx_ai_application_fault INTO oref.
    text = oref->get_text( ).
ENDTRY.

Hello,
I struggle with exactly the same problem accessing the login webservice of the BOE server. Unfortunately the previous answer did not help me since I don't understand it
Anyone able to enlighten me?
Edit: Nevermind, I just found out by myself.
Thanks,
Sebastian
Edited by: Sebastian Solzbacher on Nov 25, 2011 9:43 AM

Cannot delete old sessions from SM35 - Batch Input...

Cannot delete old sessions from SM35 - Batch Input...
We have an issue, we are trying to delete old batch input sessions via SM35 and no
matter how hard we try we cannot get rid of them. They are still in status "In Process" but they are status incorrect.
Those sessions have long finished and some are more than 5 years old.
We have tried running rsdbcreo and RSBDC_REORG but it only returns with
Temse Error, running SP12 does not list any inconsistencies. Basically we want all jobs in SM35 that ran this year only available in the SM35 queue, we have sessions that have run from year 2004 to 2008 we wish to
delete.
Anybody experience anything similar or have any advice, sorry this is an environment that i have inherited and wish to cleanup.
We have checked the following notes 706478,76422,706478,76422 and many more.
Thanks
Suleman

When you try to delete, you will be asked whether you want to delete logs too.
Here try with 'No'.
hope this helps

How to delete BDC session ?

hi gurus,
In my scenario , Before runnning BDC ( calll transaction ) , I firstly create a session ( use : BDC_OPEN_GROUP) with group name = the file that used to upload data for BDC execution , Then I check If the BDC run without error I will use BDC_CLOSE_GROUP to delete this group or else the session is kept , But when I check In SM35 , There's no session deleted ? Could you please help me ?
Thanks

>I will use BDC_CLOSE_GROUP to delete this group or else the session is kept , But when I check In >SM35 , There's no session deleted ? Could you please help me ?
BDC_CLOSE_GROUP is used to Close the session Group, if you close it you cannot insert any transactions/records to the the Session group , not for Deletion.
You want to Delete the session after the processing you have to use KEEP = ' '.
then once process is over the session will be deleted.

Determine number of active jsp /self service sessions in EBS 11i/R12

Hi,
Can someone let me know , how can I find the number of active jsp/self service sessions in EBS 11i/R12.
Thanks
Dev

Hi;
Please check below threads which could be helpful for your issue:
11i : Oracle Application Object Library Active Users Data Collection Test [ID 233871.1]
Session monitoring tool
Session monitoring tool
Regard
Helios

How to reverse/delete service entry sheet

HI all
Tell me how to reverse/delete service entry sheet after release f

Hi,
Use T.Code: ML81N, Click on other purchase order. Enter the Entry sheet/Purchase order number you want to cancel. Then the details will be copied, then click on change and then click on revoke acceptance icon.
In this way you will revoke the SES.If you want to delete the SES, after revoking SES click on Delete icon, So that the SES will get deleted.
Regards,
Biju K
Edited by: Bijay Kumar Barik on Jan 31, 2008 1:36 PM

Delete services from PO

Hi all.
I need some help deleting services from a PO. I have tried BAPI_PO_CHANGE but it specifically says that it can not be used for deleting services only creating new ones. Does anybody know another way to delete services, is there a function module another BAPI or mabye another solution?
Regards
Liselotte Hjelmbjerg

Hi Liselotte,
You must use the customer exit 002 (actually function module EXIT_SAPL2012_002).
Inside you will find an Include (ZXMEWU09). This include you must create (if it doesn't exist already).
Now to delete any service you go to the table structure POSERVICES and set the field DELETE_IND to 'X' for each service you want to remove.
That's all.
Regards,
Rob.

Web Service session manager not found.

I'm trying to understand how to use the HTTP utilities, and I'm having trouble just creating a session. I get a Web Service session manager not found error. I've read where the client has to support cookies. My eventual client will be a labview VI that talks to a web server. I llooked at the Toolsptions, but don't see anything related to cookies. Not sure if that's what's causing this anyway, but I'm just digging. Also, I want to eventually send http messages across TCP/IP. Do I need to use the TCP/IP VIs (i.e. open connection, etc) or do I use the http utilities alone. If both are needed, how does the httpRequestID and the TCP/IP connection ID correlate.
Attachments:
htttGetSession.vi ‏9 KB
WebServerError.PNG ‏13 KB

Hi can you please let me know how you resolved this issue?

BOBJ WEB Service Session - Login

Hello Experts,
I have to consume a BOBJ Web Service Session in SAP Netweawer.
Hello,
We have SAP NetWeaver 2004s and BusinessObjects Enterprise 12.0.
I've created an proxy object on the SAP Netweaver side in the following way :
se80->Create->Enterprice Service->Service-Consumer->URL/HTTP Destination-> URL = http://<host>:8080/dswsbobje/services/Session?wsdl
Then I've created an Port using soamanager.
I't seems to be working, becouse methods like : getServerInfo, getServerInfoDetails are working ok.
Now I have a problem with the method Login. As parameter for this method I see only structure CREDENTIAL, which have only one field CONTROLLER (PRXCTRLTAB).
I've expected to have in the Parameters for this method a structure EnterpriceCredential with fields like username, password and so on - but its not.
Could You help me ?
Greetings
Wojciech
Here my coding :
REPORT ztest.
DATA text TYPE string.
DATA : lr_proxy TYPE REF TO zsco_session_port. " its my session proxy object
DATA : oref TYPE REF TO cx_root.
TRY.
CREATE OBJECT lr_proxy
EXPORTING
logical_port_name = 'LP1'.
CATCH cx_ai_system_fault INTO oref.
text = oref->get_text( ).
ENDTRY.
DATA get_server_info_in TYPE zsget_server_info_soap_in.
DATA get_server_info_out TYPE zsget_server_info_soap_out.
THIS IS WORKING WELL
TRY.
CALL METHOD lr_proxy->get_server_info
EXPORTING
input = get_server_info_in
IMPORTING
output = get_server_info_out.
CATCH cx_ai_system_fault INTO oref..
CATCH zscx_dswsexception INTO oref..
CATCH cx_ai_application_fault INTO oref..
ENDTRY.
break-point.
AND THIS IS ENDINNG WITH EXCEPTION
TRY.
CALL METHOD lr_proxy->login
EXPORTING
input = login_in
IMPORTING
output = login_out.
CATCH cx_ai_system_fault INTO oref.
text = oref->get_text( ).
_ CATCH zscx_dswsexception INTO oref. this exeption is being called_
text = oref->get_text( ).
CATCH cx_ai_application_fault INTO oref.
text = oref->get_text( ).
ENDTRY.

Hello,
I struggle with exactly the same problem accessing the login webservice of the BOE server. Unfortunately the previous answer did not help me since I don't understand it
Anyone able to enlighten me?
Edit: Nevermind, I just found out by myself.
Thanks,
Sebastian
Edited by: Sebastian Solzbacher on Nov 25, 2011 9:43 AM

Keeping "CS Web Service session" alive while uploading big files.

Hi.
I have a problem when I'm uploading big files, which takes longer than the session timeout value, causing the upload to fail.
As you all know uploading a file is a three step process:
1). Create a new DocumentDefinition Item on the server as a placeholder.
2). Open an HTTP connection to the created placeholder and transfer the data using the HTTPConnection.put() method.
3). Create the final document using the FileManager by passing in the destination folder and the document definition.
The problem is that step 2 take so long that the "CS Web Service Session" times out and thus step 3 can not be completed. The Developer guide gives a utility method for creating an HTTP connection for step 2 and it states the folllowing "..you must create a cookie for the given domain and path in order to keep the session alive while transferring data." But this only keeps the session of the HTTP Connection alive and not the "CS Web Service Session". As in my case step 2 completes succesfully and the moment I peform step 3 it throws an ORACLE.FDK.SessionError:ORACLE.FDK.SessionNotConnected exception.
How does one keep the "CS Web Service Session" alive?
Thanks in advance
Regards.

Okay, even a thread that pushes dummy stuff through once in a while doesn't help. I'm getting the following when the keep alive thread kicks in while uploading a big file.
"AxisFault
faultCode: {http://xml.apache.org/axis/}HTTP
faultSubcode:
faultString: (409)Conflict
faultActor:
faultNode:
faultDetail:
{}:return code: 409
<HTML><HEAD><TITLE>409 Conflict</TITLE></HEAD><BODY><H1>409 Conflict</H1>Concurrent Requests On The Same Session Not Supported</BODY></HTML>
{http://xml.apache.org/axis/}HttpErrorCode:409
(409)Conflict
     at org.apache.axis.transport.http.HTTPSender.readFromSocket(HTTPSender.java:732)
     at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:143)
     at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
     at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
     at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
     at org.apache.axis.client.AxisClient.invoke(AxisClient.java:165)
     at org.apache.axis.client.Call.invokeEngine(Call.java:2765)
     at org.apache.axis.client.Call.invoke(Call.java:2748)
     at org.apache.axis.client.Call.invoke(Call.java:2424)
     at org.apache.axis.client.Call.invoke(Call.java:2347)
     at org.apache.axis.client.Call.invoke(Call.java:1804)
     at oracle.ifs.fdk.FileManagerSoapBindingStub.existsRelative(FileManagerSoapBindingStub.java:1138)"
I don't understand this, as the exception talks about "Concurrent Requests On The Same Session", but if their is already a request going on why is the session timing out in the first place?!
I must be doing something really stupid somewhere. Aia ajay jay what a unproductive day...
Any help? It will be greatly appreciated...

RPC web service session beans and local interfaces

I am wondering if it is possible to use EJB 2.0's local
interface (vs remote interface) with 6.1's RPC web service
session beans. Since WLS generates the SOAP servlet that
invokes the RPC session bean and I do not find
a way to some how tell SOAP servlet to use local interface to
get the session bean's local home interface, I am not sure
this can be done.
Any comments would be appreciated.
Thanks.
Peter

Ta. Thanks for the info.
Any idea when Local I/F support is due?
-Nick
"Neal Yin" <[email protected]> wrote:
>
"Nick Minutello" <[email protected]>
wrote
in message news:3d4413a4$[email protected]..
I was just about to post the very same question - but for WLS 7.0.0.1.
There are essentially two questions:
1) (from a functional perspective)
Can I expose Local Interfaces as SOAP using the auto-generation(servicegen ant
tasks)?Local Interfaces support is coming.
2) (from a performance perspective)
Does the generated SOAP implementation go via the (expensive) RemoteInterface
(ie marshalling) - or is the RMI marshalling optimised out (by setting<enable-call-by-reference>true</>)?
You can set this option by yourself on your EJB. Web service runtime
doesn't
do any magic in this area.
Regards,
Nick
"Peter" <[email protected]> wrote:
I am wondering if it is possible to use EJB 2.0's local
interface (vs remote interface) with 6.1's RPC web service
session beans. Since WLS generates the SOAP servlet that
invokes the RPC session bean and I do not find
a way to some how tell SOAP servlet to use local interface to
get the session bean's local home interface, I am not sure
this can be done.
Any comments would be appreciated.
Thanks.
Peter

HELP! SAP Execute Delete Archiving Session failure

Dear All,
Could anyone give me opinions on SAP problems?
When we archived object u201CFI_documntu201D, delete a u201CFilesu201D in tcode u201CSARAu201D, the AIX file system u201C/Oarcle/R3P/oraarchu201D was full, SAP and database have stopped, one archiving session deleting was failed and cannot retry. The SAP error message below:
"Text CCR 110000570022007002 ID 0001 language EN not found"
Message no. TD600
Diagnosis: you want to read a text which does not exist in the database (or update memory)
system response: Reading could not be carried out.
Procedure: you need to create this text:
1.Initialization (module INIT_TEXT)
2.Save (module SAVE_TEXT)
In SAP -> Overview of Archiving, the icon of file "000092-0031FI_DOCUMNT" is a THUNDER, not a green light.
I captured screen for reference.
[http://picasaweb.google.com.hk/lbiceman/SAP_error?feat=directlink]
Please teach me how to delete archiving session after archive job was completed.

Hi Alan,
I have not faced this particular situation, so the following is just a thought, please try with caution.
Delete the cancelled job from the job overview, this possibly does away with the flash icon (THUNDER) on the deletion status of archive file, hopefully you should be able to manually re-run the delete job by going to SARA-(object FI_DOCUMNT) ->Delete and choosing the file for which deletion was incomplete.
Hope this works,
Naveen

Deletion service sessions

Similar Messages

Maybe you are looking for