Delevey completion indicator for item category D

Hi!
When a PO is created with item category D (service), the delivery completion Indicator is not seen in the PO.
But, if I craete PO for same document type with item category other than D, I was able to put the delivery completion
indicator in the Delivery tab in item details. Now, how do I get the delivery completion indicator for Item Category D(Service).
pls help me.
Regards,
Vaibhav

hello,
Go to
SPRO-->MM->Purchase order->Purchasing -> Purchase order-> Define screen layout at Document level
Select the field selection as PT9F and tick the Delivery Compl Indicator at two places .
The system will now show you the indicator when you create a PO with item cat as D.
this should work.
Cheers... Ganesh S.

Similar Messages

  • What is Completion Rule Setting for Item Category KBN?

    Hi,
    In the standard SAP configuration, what is the setting of Completion Rule for
    Item Category KBN?  In our system, currently it's set to "B".
    Thanks!

    Dear Mari
    In Standard, item category <b>KBN</b> will have "<b>A</b>" as billing relevance.
    "A" Indicates what the basis for billing should be.
    Billing is based on the outbound delivery. Billing status is only updated in the outbound delivery. 
    For information, in standard, both <b>KBN</b> and <b>KEN</b> item categories will have "<b>A</b>" as Billing Relevance and in <b>KEN, "W"</b> will be maintained in the field "<b>Special Stock</b>". 
    Thanks
    G. Lakshmipathi

  • Delivery Completed Indicator for Services

    Hi Guys
    In PO's, in the delivery tab, the Delivery Completed Indicator appears only for Stock PO's. Is it possible to make the Delivery Completed Indicator appear for non stock PO's as well, I mean for services?
    Thanks

    Hi,
    It is not possible to setup Delivery Completed Indicator For Services Purchase orders or Non stock Items.
    Reg,
    Ashok
    Rewards welcome.

  • Delivery completed indicator for STO cannot be set!

    Dear colleagues,
    There are number of STO’s those goods issue quantity > quantity of goods received. Because of this delivery completed indicator cannot be set due to message “06 848 - Delivery completed indicator cannot be set for item XXXXX”.
    There is an OSS note (167795) that allows to set delivery completed indicator for such purchase orders. Even though our SAP release is 6.04, report RM06EV70 does not exist (yet BADI ME_ARCHIVE_ACTIVE is active) in the system and OSS note cannot be implemented.
    Any help would be appreciated.
    Regards,
    Melih
    PS. Please do not provide answers like “the goods receipt must be first posted via the entire goods issue quantity; then you can post a scrapping via the shortfall quantity” since there are backdated STO’s.

    Hi,
    Find STO created for which plant in t.code:ME23N and check MRP parameter maintained for that plant in t.code:OPPQ( also check entry of that plant in t.code: OMCD).
    Also cross check which Field Selection Key assigned to your STO PO document type and check “Delivery completed" indicator” available as Optional entry in GR/IR control segment in your Field Selection Key.
    SPRO - > MM - > Purchasing -> Define Screen Layout at Document Level
    Regards,
    Biju K

  • Credit Check while creation of Sales Order for Item Category Purchase Req

    Hi Experts,
    We are creating Sales Order using an Order Type ABCD for a material 1000. While creating Sales Order, we use Item categories (ZOVD, ZOVB,ZOST,ZOVP and ZOBO).
    Credit Check settings are there at Order Type ABCD as well as all the Item Categories (ZOVD, ZOVB,ZOST,ZOVP and ZOBO). We are trying to test a scenario where a customer does not have enough credit limit while creating a sales order.
    When we create a sales order for Item Categories (ZOVD, ZOVB,ZOST,ZOVP), credit check fails because our customer does not have enough credit limit, so that Sales Order gets created and Delivery does not get created (This is what we want), then we go into VKM1 manually and relase the sales order and then if we go to VA02 and check the status of the Sales Order, it says sales order status is complete. My Sales Team is saying here also Purchase Requisition is getting created.
    When we create a sales order for Item category ZOBO, it is going into Purchase Requisition screen. Once we give another plant in the create purchase requisition screen and save it we are getting a message that cannot create Purchase Requisiton because of Credit Block.
    The settings were same for all the Item categories.
    1) What made difference to complete Purchase Requisition for Item Categories (ZOVD, ZOVB,ZOST,ZOVP) and not for Item Category ZOBO when my customer is not having enough credit Limit.
    2) Why Purchase Requisition screen is not coming for us when we create an Sales Order for Item Categories (ZOVD, ZOVB,ZOST,ZOVP). We only get Create Purchase Requisiton Screen for Item Category ZOBO.
    Thanks
    Rajanikanth

    Hi,
    None of the Item Categories has Create PO Automatically.
    Thanks
    Rajanikanth

  • SD - Manual entries allowed for item category in the Sales Order

    Hi experts,
    please do you know any OSS note related to SD, in order to increase the number of Manual entries allowed for item category in the Sales Order (table T184)?
    Thank you very much
    Andrea

    Hi,
    I searched OSS notes and did not find any OSS Note related to add more than 11 Manual Item categories or append T184 Table.
    Has any found solution for this, will this be a CORE MOD.
    Pavan Verma

  • New field in Pricing field catalog for Item category

    Dear SD colleagues,
    We have scenario of maintaining pricing for Lower level BOM component.
    Like:
    Base price - 100/-
    When BOM explodes - 95/-.
    For this, I have taken ABAPer help and inseted a Z field for Item category in Pricing field catalog.
    Then, a new condition table is been generated using ZPSTYV and included in Access sequence. For Base price condition type, we have maintained record in combination with ZBOM-Item category for lower level BOM item.
    A new pricing routine is created in VOFM for Condition value and same is been assigned to Condition type as Alternative calculation type in pricin gprocedure contro data.
    Whe I create Sales order, value based on ZBOM is being pciked up by system.
    request you to please help in this regard.
    Thanks & regards,
    Praveen.

    Hi Marino,
    I have a requirement to determine the pricing based on "Discount Code", which is not a standard SAP field and i would like to have this as a custom field and linked to  customer in custom table.
    Question: When i add a new custom field and custom table for pricing, what are all the things i need to do in terms of ABAP.
    As per my knowledge, below are the steps...Please check and confirm my understanding is correct and let me know if i miss anything.
    1. Create a new field
    2. Create Custome Table
    3. Add field to Field Catlogue KOMG
    4. Add Field to KOMP (as this is item field)
    5. Add code in userexit USEREXIT_PRICING_PREPARE_TKOMP to make the data avaialable - Sales Order
    5. Add code in userexit USEREXIT_PRICING_PREPARE_TKOMP to make the data avaialable - Billing
    Thanks.

  • Order-related billing for item category TAN

    Hi All,
    How can I make item category TAN order related-billing document?
    I already changed the settings for TAN:
    Billing Relevance - B (Relevant for order-related billing)
    And maintained the copy control between sales document and billing document for item category TAN:
    Copying requirements: 002 (Item/Order Related)
    Data VBRK/VBRP:      001 (Invoice Split - Sample)
    But when i create the billing document, it is still showing that the item is not relevant for billing.
    Delivery document has already been created for this item. Am I missing something?
    Thanks,
    Olyn

    hi,
    pl enter the billing doc type in the field for order related billing in the sales order document type overview.
    2. there might be billing block at sales document header level or u might have checked billing block at item category TAN,
    CHEERS

  • Ship to party not copied from PR to PO for item category D

    Gurus,
    Am populating unloading point and ship to party in a PR for both item category standard (" ") and service ("D"). However during PR conversion to PO, both these fields only get copied for item category standard and NOT for item category service. What is the correct set up so that these fields are copied from PR to PO during PR conversion ? Any customizing point i missed ?
    Cheers
    Olivier

    HI,
    I think this is the wrong forum to proceed with this.
    SAP Community Network Forums » SAP Solutions » SAP Solution Manager
    Regards

  • Change Partners for item category - TAB

    Hi All,
    Why it is not possible to have different ship-to-party at item level for TAB orders.
    For item category TAB, the partner functions is maintained as "T" which is "No item Partner". Can you help me understand why SAP has maintained like this.
    Please provide me a quick response.

    HI,
    TAB item category is used for Make to Order senario, thats why its do not have Multiple Ship to party or Partner determination for Item category..
    2nd Make to Order is a Order contaning Customer Specific requirements like ur preparing a proto type for customer requirement (Like new development).So they break down the sales order into diff -diff parts U know (we call it BOM) & we get the delivery date s & quanties for that Make to order from Production Order because here Sub items are related to main item like...
    Computer ordered with entena....
    In make to order system brekdown the req.into...
    1Monitor
    2 CPU
    3. entena
    4.TV card etc...But all these belongs to 1 single material (even though they are also a individual material)
    thats why we dont have a provision of partner function for item category TAB....
    I hope i am able to explain u.......Pls. ask me if nathing is not clear to you......
    NOTE: You can always have a diff. Ship to Party at Header level.......
    Regards
    Deepak
    Edited by: Deepak Dhingra on Jul 14, 2009 6:58 AM

  • Zero price for item category

    Hi ,
    I want to controll the price by item category, I want my user to manually change the item category to zzzz  in case the material is sent as sample. For item category B the pricing field has "B" (PRICING FOR FREE GOODS 100%)
    while making sales order even after changing the item category to zzzz , price is getting calculated.
    Pl. help.
    regards,

    hi ankur,
    i have done the item cat determination in VOV4. I am able to change the item category in sales order . In item category I changed pricing to "B" and blank , hoping something would work but no. The problem is even if I am using this ZZZZ item category , price is getting calculated. Is there any other setting except this one. As far as I know this setting is enough to get the all the prices to ZERO is sales order.
    input needed,
    regards,

  • Tranport Request for Item Category

    Dear All
    I am trying to create transport request for item category but when I include it in transport and save it, It give me error
    "Object R3TR TABU TVAPT, referred to by the object key, does not exist
    Diagnosis
    The object keys of the request/task cannot be edited because the object (R3TR TABU TVAPT) which is referenced by the object key is not in the request, nor is it going to be added to the request"  How can i include these object in my transport
    in order to transport them?
    Thanks in Advace
    Nomi

    Dear Marco
    Sorry for late reply.What i did was i asked my basis consultant to modify the traget sytem and customize the item catagory again.I think this is the only solution.If you find another do share with us
    Thank you
    Nomi

  • Material field entry as optional for item category:B

    How to make material field entry setting as optional for Item category:B. By default the setting is Not allowed for material for Item category:B.

    Hi
    Instead of material code ,provide material text in PO & Put an Account Assignment Category

  • Complete Indicator for earmarked funds

    Hi,
          How can i check the complete indicator check box for earmarked funds while creating the program for journal entries. Iam using the BAPI "BAPI_ACC_DOCUMENT_POST".Is there is functional chnages if i always uncheck the checkbox for done indicator.
    Thanks & Regards,
    Arun.

    Hi,
    Kindly let me know if you have found a way to set it through BAPI or some workaround to set the completion indicator for Earmarked funds in BAPI_ACC_DOCUMENT_POST.
    Thanks.
    BR,
    Jay.

  • Delivery completed indicator for Service purchase order item

    Want to check the PO item for services already delivery completed.
    Field EKPO-ELIKZ (delivery completed indicator) is for material line item, is there a equavalent field for Service line item?
    What field /how to to check for a service line item in Purchase order already delivery completed ?

    For material:
    Delivery completion (DCI) tick available at line item level for each material (EKPO- ELIKZ)so you can check for the each material in PO the DCI is available or not.
    For Services:
    As Service code (Service line items) are maintained in details screen of Header line item. So whenever the DCI (Delivery completion indicator) marked for that Header line item it means that all the service line items are marked as DCI for that Header line.
    DCI indicator can mark manually in Change PO mode and automatically when service entry done as final for that Header line.
    So you can check the DCI for service same way as you do for material
    Hope it will help you
    Regards
    Vikrant

Maybe you are looking for

  • How can I change the number of pages in a spread?

    I imported a document that our PR department used to create in Quark into InDesign 5.5. They have it set up in four-page spreads. However, the document has always been printed with a coil binding with a large graphic on each left-hand page and text o

  • How to use new aluminum apple remote with an imac

    How does it work?  Menu button doesn't seem to do anything.  I paired it io and got the linking chain icon.  The volume up down works, and sometimes the left right buttons move itunes to the next selection, but that's it.  I was not able to find an o

  • Why can't I open Word doc. attachments I receive in emails?

    All of a sudden, I can no longer open email attachments that I receive as Word documents.

  • Sleep not working

    Since installing the Apple drivers on my Mac mini 2012 with Windows 7 successfully installed, there is absolutely no option of making the computer sleep. I've updated the drivers from this website but it's made no difference. Attached is the output f

  • Abstract Interfaces from diff SWCVs

    Hi Guys, I am doing  PROXY-BPM-SOAP synchronus scenario.  The request is coming from the outbound asynch interface which would be talking to the webservice request and the reponse from the webservice should be sent back to inbound asynch interface. T