Deley when posting and recieving messages. New to Ichat4?

I get a short delay when hitting enter after typing a message. sometimes as long as 20 seconds before my message goes. any idea why or how to fix it?

Can anyone help?

Similar Messages

Airplay disconnecting when sending and recieving a message

I use Airplay on my iPhone to stream music from the music app to my Apple TV. When sending and recieving a message over Skype or Facebook, my phone disconnects from Airplay, pausing the music.
Is this a common issue, and are there any known fixes, or do i just have to wait for Apple to fix this in a future update?

That is silly - Facebook message notifications are tiny. You can't provide some vague hand waving dismissal of the problem and blame network throughput.
I have the same issue - it's obviously a bug with iOS or Facebook. Airplay shouldn't disconnect every time a new message arrives. If I don't have Facebook open the same messages still arrive in the background and airplay works fine.
The issue is specific to a foreground app receiving notifications and then Airplay craps out.
Come on Apple, fix this!

My NEW ipod touch stopped sending and recieving messages!

My NEW ipod touch stopped sending and recieving messages even though I am connected to the internet and all other internet apps are working just fine. I am just replying to messages sent to me. Any suggestions as to the solution?

This one
http://www.apple.com/support/itunes/

TS2634 My problem - when syncing and error messages comes up: iTunes could not sync calendars to the iPhone because an error occurred while margin data." I've tried turning the phone off and back on, & tried both USB ports but get the same thing. What

My problem - when syncing and error messages comes up: iTunes could not sync calendars to the iPhone because an error occurred while margin data." I've tried turning the phone off and back on, & tried both USB ports but get the same thing. What can I do next since it doesn't give me even one clue as to what the error would be?

Before I started to resync calendars one by one as suggested in the troubleshooting article, I remembered something that came up in a sync when I first attempted : a 'which one do you want to keep' message about a repeating calendar event, which came up with three options, one from Calendar, and two from iCal on the phone. I deleted that event, then went through the calendar resync one by one, and all seems OK now.
In Music there is a way to find 'ghost' items that show up as grayed-out on the menus, so that you can try to reassociate or delete them. It would be nice to have a similar way to work with Calendar!
Thanks for pointing me to the right article.

Error when login and authorizing my new computor

error when login and authorizing my new computor

Zachy,
It goes something like this...
Put your new drive in the enclosure. Use Disk Utility to format it, etc. I'd give it a slightly different name than the original. Let's say you have Old Disk and New Disk as your drive names. Use Carbon Copy Cloner to copy Old Disk to New Disk. Now you should have an exact copy, which you can test by rebooting and holding down the Option key. Choose New Disk from the list and let it boot, make sure all is well.
Shut down and physically swap the drives. Take Old Disk and put it in the enclosure. Now your system has a new disk with a lot more space and you can reformat your old disk and just use it for large files or whatever.

Why can i send and recieve messages on my home wifi but nit when i am connected to other wifi connections, why can i send and recieve messages on my home wifi but nit when i am connected to other wifi connections

plz help i need to know why i cannot send or recieve messages on other wifi connections

What networks do not work?
It could be that the ports used are being blocked. See:
Using FaceTime and iMessage behind a firewall
Try using Google's DNS with the other networks. When connect to those networks, go to Settings>wifi and change the DSN to 8.8.8.8

Call details when sending and recieving roaming text messages when abroad.

Is it possible to get the full number of roaming text messages that are sent and recieved whilst abroad ?

Only by checking your phone logs.
My O2 will just show the international call handling number.

Distributed Destination and Recieving Messages !

Hi !
          I'm new to JMS.
          I'm configuring a Weblogic Cuslter of 3 nodes with a JMS Server deployed on each node (Can't target a JMS Server to a CLUSTER). We have 4 destinations (Queue) deployed on each JMS Server.
          I'm creating a Distributed Desination with members being the Queues from the three JMS Servers to take advantage of Load Balancing and High Availability nature of DD.
          No my question is, when a message is placed on the Queue (message received from MQ Server through Weblogic Bridge), which one of the three Queue is the message going to go? My guess is it's going to be sent to the Queue based on Round-Robin algorithm.
          Can you please explain me how sending/recieving messages with JMS are going to work in a Weblogic Cluster environment?. We will be using MDBs to receive messages. So, I'm assuming I'm going to need to use the JNDI for the DD in my descriptor. Also for sending, I'm assuming I should use the JNDI for the DD.
          Thanks very much for your help.

If you'll send JMS message to your queue from your server app deployed to
          your cluster then the balancing algorithm will use server-afinity policy (if
          it is not turned off) and message will be delivered to the queue on the same
          server where you emit it.
          Denis.
          <Karun Subramanian> wrote in message news:[email protected]..
          > Hi !
          > I'm new to JMS.
          >
          > I'm configuring a Weblogic Cuslter of 3 nodes with a JMS Server deployed
          > on each node (Can't target a JMS Server to a CLUSTER). We have 4
          > destinations (Queue) deployed on each JMS Server.
          >
          > I'm creating a Distributed Desination with members being the Queues from
          > the three JMS Servers to take advantage of Load Balancing and High
          > Availability nature of DD.
          >
          >
          > No my question is, when a message is placed on the Queue (message received
          > from MQ Server through Weblogic Bridge), which one of the three Queue is
          > the message going to go? My guess is it's going to be sent to the Queue
          > based on Round-Robin algorithm.
          >
          > Can you please explain me how sending/recieving messages with JMS are
          > going to work in a Weblogic Cluster environment?. We will be using MDBs
          > to receive messages. So, I'm assuming I'm going to need to use the JNDI
          > for the DD in my descriptor. Also for sending, I'm assuming I should use
          > the JNDI for the DD.
          >
          > Thanks very much for your help.

When sync ipod error message "new wave sound not copied, because not found

I just upgraded to 7.0 and after I download music to my library I get a message stating the following "new wave sound" was not copied to the ipod because it could not be found. I looked on apple support for this plug but no luck. Please help.

Hello LeaMinovitch,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes Store: Authorize or deauthorize your Mac or PC
http://support.apple.com/kb/ht1420
To authorize a computer, follow these steps:
Open iTunes.
Choose Store > Authorize This Computer from the menu bar.
You may need to show the menu bar to see this option in Windows. In earlier versions of iTunes, you can access this option from the Advanced menu.
Enter your Apple ID and click Authorize.
If your Apple ID uses an expired MobileMe account, you can still authorize your computer.
In some cases, iTunes may ask you to authorize the computer again. iTunes should use the same authorization as before if the computer is in your list of authorized computers.
Learn what to do if iTunes repeatedly asks you to authorize when you try to play your content.
Best of luck,
Mario

Skype slow with sending and recieving messaged in group chat

I seem to have no trouble with ordinary one to one shat, but when i'm in a group chat it takes a very long time for my message to be sent it just stays gray and have that loading circle to the left.
Also some messages recieved are recieved many minutes after they are originally written, making a group chat very confusing overall...

http://heartbeat.skype.com/

Adobe Reader XI closes when opened and Windows message states a 'Patch' is missing?

Can anyone help. Prior to Adobe Reader XI I had no problems. When opening XI it asks me to close as there is a problem. Then I get a message from Windows (XP) stating that a 'Patch' is missing.

Uninstall Reader using http://labs.adobe.com/downloads/acrobatcleaner.html
then download and reinstall from http://get.adobe.com/reader/enterprise/

Problems in sending and recieving messages, calls go missed without notifying ..!

So here's my problem,,,,!! while sending messages it doesn't send message at once as it happens commonly, the message is sent after a while i knw that by hearing the swoop sound... same is with sending messages...
calls go unnoticed/missed because calls are not notified...
any solution ?

sameerdaga wrote:
Except 8, 10, 11, 12, 13, 14 and 20, which issues relate to WhatsApp. Also to put phone to flight mode is not the solution to problem of auto switching on of phone while charging. Kindly resolve other issues and forward the issue related to WhatsApp to WhatsApp technical team.
regards
Sameer daga 09825304004
I do not use whatsapp and am not interested in what it does or not. It's up to you to report bugs to the developer. And when I check it's actually problems 8,10,11,12,13,14,19,20,21,22,23 and 24 related to Whatsapp. That's 12 out 25 of your "problems" related to a third-party app.
Phone switching on when charging is not a problem or a bug - that is the way charging works today - on WP8, Android and iOS so you'll have to live with it regardless of what phone you have.
Your issue 25 is not an issue - you just don't know how to do it. When you open the received text message at the bottom there is an icon with two arrows, one pointing left, the other pointing right. Tap on that icon and the number from which the message was sent will be highlighted.
Issue 21 - all contacts for which I have included a birthday are showing in my calendar. Don't know what you are doing wrong.
I could go on, but I have to do a bit of work as well.

Sending and recieving message problems

hi.
I am used to use skype from my samsung galaxy note and it was working fine but suddenly skype has been disturbing lately
I can see whom I am talking to but when I am sending any message I am not being able to see what I am sending on my screen and also cannot see what my frined is sending me back! I have reinstalled skype alot of times but its not recovering.
please help me.

Hi moha_affa,
To be polite, this isn't a great place for your question. If you're using PC side control, or some other way that NI products are involved in your project, you'd have a better chance at success here. The NI forums likely have a few members with uC experience, but it's far from the focus.
I'd suggest going to the Microchip forums, they have support forums organized by chip family and also by functional area, such as CAN.
http://www.microchip.com/forums/f103.aspx
You'll find lots of information, and very knowledgeable experts there.
For starters, some more info on your problem will be desired.
-Better description of your problem, at compiling, execution, etc.
-Can you program chip to succesfully run a test program?
-Are you using capacitors across pairs of Vss and Vdd pins?
-Breadboards are generally discouraged for CAN bus connections, so might consider a soldered prototyping board if possible.
Those are a couple quick ideas. Try over there though, much better support for PICs.
Good luck,
Mark

Sending and recieving messages.

Hi,
I am join a new company and ans working with the jms now. "QueueConnection" and "Queue" (or Destination) is ready there. I need to set up one testing program which can send and receive the messages please provide the guidence.
Thanks in Advance.
J_JON

well, if you have specific questions, this is the place to ask them. if you are looking for tutorials, you're far better off w/ google.

Buzz on audio when recording and in playback - new mini mac?

Up until now I have been recording on a Macbook Pro, however I have recently moved onto a Mac Mini and that's when this problem started...
I am having trouble because when I play audio and the R button is on theres a high fuzz/ buzz/ ringing sound along with what I am playing. This is recorded and I can hear it when I listen back too. What's weird is that there's a dead silence between the notes. When recording software instruments through a usb midi keyboard it works and playback as it should.
I have tried changing the usb input of my sound card, using different instruments incase it's a buzz from that, changing the leads, and also checked the sound card still works fine with my old Macbook Pro. All this is fine. (I use an Alesis IO4 sound card)
All I can think is theres something I don't understand that I haven't done properly in Logic since installing it on the Mac Mini which differs to how it is set up on the macbook. That, or something is wrong with the Mac Mini itself however it's brand new from Apple.
Please help if you can shed any light on this.
I hope this makes some sense!

I would suggest providing an audio sample of the "fuzz/buzz/ringing sound" so that people can better guess what the problem is.
Noise comes from many places, and there are many types of noise.
Hard to take a shot in the dark otherwise.
Treatment

Deley when posting and recieving messages. New to Ichat4?

Similar Messages

Maybe you are looking for