Delicate One Key Recovery function of S10-3

The One Key Rescue of my S10-3 was not functioning any more.
After I have taken several steps in creating Recovery Disc using the option in the One Key Rescue, S10-3 displayed that 3 dvd disc are needed but I had only one in hand, so I clicked the Return in the display to exit the process. As a result the One Key Rescue function was ruined.
Since Lenovo knows exiting the process will ruin the One Key Rescue function,
a. why an exit option is provided.
b. why no warnings are given at the beginning of the process.
c. this is obviously a bug, why Lenovo still let it exists.
Fortunately, I know Lenovo Service Centre can revert the S10-3 to its initial state at a chargeable base.
This is easy to people in cities like Hong Kong, but it will be a disaster to people in cities of some Asian countries where there are no Lenovo Service Centres, people have to spend a lot of time and money in transportation in order to have  their computers rectified.

i try to unistalling intel storage but my problem doesnt solved, stil "Driver initialized failed"? anyone can help? thanks

Similar Messages

  • Disk Partitioning / Logical Drives vs. One Key Recovery Functionality

    I just purchased a Windows 7 Lenovo H530 and need to know if I can shrink the C: drive and add an extended partition with logical volumes without disabling OKR / Rescue System 3.0 functionality. My 1 TB HDD:
    200 MB     SYSTEM_DRV (Primary Partition)
    906 GB     C: (Boot/System Primary Partition)
    25.07 GB  Unlabeled (OEM Partition)
    I've read loss of F2 functionality due to recovery partition ID changes and/or OKR fails to complete due to any change in the size of the original C: drive...also read post of successful OKR after altering the C: drive.
    Has anyone successfully attempted this on a newer machine? I can't find a definitive answer as the OKR software has been updated over time and most of the post are 2+ years old.  Thanks in advance for any assistance!

    Hi, You're lucky if you only have 2 partitions - isn't there a nice tiny one of 0,2 Gigabytes also?
    What I can tell you is that I spent a lot of time as well trying to mend the soft/partitioning and to get rid of bloatware!
    In short: I did a clean reinstall + recovered my OEM activation + partitioned the HDD as I wanted. Now it looks and reacts familiar (I used XP as well, before).
    BEWARE: trying partitions managers as Easeus or Paragon has blocked my partitions - they seem to be "coded" somehow.
    Do not hesitate: after you backup activation erase totally HDD (I used killdisc) and all shall be gone and you start fresh.
    Get a Win 7 serching for "digitalriver" Get ABW for activation restoring Get drivers from Lenovo support, install only what you need by function not all of them!
    Send a PM if you need more details. Regards from Romania!
    Enjoy!

  • One Key Recovery - Basic Questions

    I just purchased a used Ideacentre H215 (0893-1AU) desktop computer. It was reset back to the original factory defaults. I went to make a set of "Factory Default Recovery Discs" using Lenovo's One Key Recovery (OKR).  However, this option was not available.
    1) Is this something that can only be done once? (note: unfortunately no such discs were included in the sale - only a Lenovo drivers CD).
    2) The OKR did provide an option to make a bootable "Recovery Disk with the Current System" partition.  Does this include the Windows 7 Operating System?  Is this an exact copy of what is currently installed on the C drive?  Is this what I would use to reinstall Windows 7 on a new hard drive?
    --thanks--

    hi jrw11,
    Welcome to the Lenovo Community.
    Regarding your questions:
    1. Factory Recovery disc creation can only be done one time (see this link). but you can trigger the One Key Recovery function anytime by repeatedly pressing F2 during boot-up as long as the hidden partition is active - this will guide you through in restoring the factory image of the PC)
    2. If you create a"Recovery disc with current system", this create a bootable image of your C:\ drive which contains the Windows 7 OS, with your files and softwares - you could also use this image if you need to restore in on a blank hard drive.
    As an alternative, you can use Aomei Partition Assistant Home Edition or EaseUS Disk Copy Home Edition to clone your HDD.
    Hope this helps
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • One Key Recovery for S10-3t

    I got my new s10-3t and feel that there are certain problems with Windows 7 and/or driver installation. Secondary portrait screen orientation does not work, and, even more strange, I cannot remove the Lenovo Screen Rotation program from the computer (using Control Panel)  - after uninstallation it is reported to still remain there. There are other minor problems. According to Yigit's advice, I am going to perform a one key recovery (OKR) of the system in order to get clean windows and drivers.
    There are several questions. Knowing the answers could help me a lot  during the OKR process, since by no means I might be considered as an experienced user.
    1. How to start the OSR process:
    a)  Use the OneKey Recovery program whose shortcut I have preinstalled on my desktop, and choose System Recovery
    b) Switch off the computer and then switch it on with a small button in the upper-left corner of the keyboard
    Maybe a) and b) are identical?
    2. Are there any important choices (questions)  that I have to make (answer) during the OKR process? I mean really important choices, not  like language, time or user name choice, etc.
    3. Would it be possible during to OKR process to change the size of the partitions in my hard disk? Presently I have Local disk C: - 187GB and Lenovo D: - 30GB. I would personally prefer to have C around 100GB and the rest to be D:.  Disk C: should contain windows, drivers and programs, and D: my personal files, like photos, musics, movies.
    4) After OKR is over,  I will get the computer:
    a) with Windows 7 only, no drivers at all and no Lenovo preinstalled programs
    b) with Windows 7 and drivers, at least basic ones in order to get connected to Wi-Fi internet, to have sound and normal graphics
    c) as it was shipped to me, with Windows, drivers and all the Lenovo preinstalled programs like VeriTouch, VeriFace, SmileDock and others, that I have already removed as useless for me.
    d) Should I perform any backup prior to OKR? I have no personal files on this computer, i.e, absolutely nothing to loose. Presently I backed up (onto my flash drive) only the drivers from the Lenovo D: disk.
    e)  Does the system sit in \\?\Volume{64...} where it is going to get recovered from? I do not see this partition in Windows Explorer, but I do see it in Defragmenter.
    Sorry that the question is quite long.
    Thank you.
    Solved!
    Go to Solution.

    lots of questions
    - how to start the okr process:
    options are the same, if you select it under windows, windows will restart.
    - are there any important choices (questions) that I have to make (answer) during the okr process? i mean really important choices, not like language, time or user name choice, etc.
    nope.if application asks click "next"
    - would it be possible during to okr process to change the size of the partitions in my hard disk? presently I have local disk c:  187gb and lenovo d: 30gb. i would personally prefer to have c around 100gb and the rest to be d:. disk c: should contain windows, drivers and programs, and d: my personal files, like photos, musics, movies.
    if you make changes on volumes, one key recover will stop working.
    - after okr is over, i will get the computer:
    c. 
    as it was shipped to me, with windows, drivers and all the lenovo preinstalled programs like veritouch, veriface, smiledock and others, that I have already removed as useless for me.
    - should i perform any backup prior to okr? i have no personal files on this computer, i.e, absolutely nothing to loose. presently i backed up (onto my flash drive) only the drivers from the lenovo d: disk.
    if you have external dvd rom, i suggest you to burn factory default backup, just in case.
    - does the system sit in \\?\volume{64...} where it is going to get recovered from? i do not see this partition in windows explorer, but i do see it in defragmenter.
    there's a hidden partition for system & recovery files.it's better not to see cause if you see hidden partition under windows, one key recover stops.

  • Brand new G560 - function keys all launch "One Key Recovery"

    The subject line says it all - whenever I try to use one of the special purpose keys, such as volume-up or volume-down, instead of doing the marked task, the lap top launches one key recovery instead.
    Any suggestions on how to fix this?
    I'm running Win7 64 bit.
    Solved!
    Go to Solution.

    Sigh. Never mind - first time with a lenovo keyboard, I mistook the little key with the red label at the top of the keyboard as the f-key modifier instead of the fn key at the bottom.

  • Solved! Fix / Repair Nova Button / One Key Recovery after replacing SSD - Walkthru! Yoga 2 Pro

    I created this full walkthru for people who upgrade / or replace their hard drive / SSD drive on the Lenovo Yoga 2 Pro or other Lenovo products that has the Nova button - One Key recovery solution. I did this on my Yoga 2 Pro. So it should work perfectly for those owners for others I'm not certian but it should be similiar for other Lenovos.
    Essentially this will rebuild your laptop back to factory settings including full nova button functionality without having to buy the lenovo recovery disks. It took me several days to piece this together from everything on the web into an easy to follow step by step process so I hope you appreciate / enjoy it And I hope it saves you lots of time.
    The process is not that hard but you are completely wiping your hard drive yourself. All your data will be gone. Bear this in mind. You have to be bold enough to try it. And it's not for the faint of heart.
    Read through the whole thing first before doing it step by step.
    Here we go.
    There are a lot of steps but it's a fairly simple process.
    Requirements at least 2 USB sticks - One 4 GB or more
    Necessary Files:
    1. Okr8 Engineer - Wipes the hard drive and creates the necessary paritions to bring Lenovo drive back to initial state.
    This is the file you really need.
    Download here:
    http://www.filedropper.com/win8okr80withoutos > my personal upload <
    https://torrent.pl/de/0438900090510,lenovo-okr8-one-key-recovery-8 or do a search for OKR8.
    2. Power Iso - Properly burns Okr8 on a bootable USB for installation purposes.
    http://www.poweriso.com/
    3. Download copy of Windows 8.1 OEM version - Wish I had found this link before!
    http://windows.microsoft.com/en-CA/windows-8/create-reset-refresh-media
    For the Yoga Pro 2 you do not need the Windows 8.1 serial as it's imprinted directly onto the bio for others laptops laptops. Use produkey to find you're serail if you lost it you don't have a Bio embedded laptop: http://www.nirsoft.net/utils/product_cd_key_viewer.html
    4. Get Necessary Lenovo Drivers - Easily accessible on the Lenovo website. Just go and download the drivers you need for you laptop.
    Links to hard to find drivers
    Veriface 4.0 : https://forums.lenovo.com/t5/Yoga-Flex-Laptops-and/Veriface-Download/td-p/1459391
    Dolby v4 : http://support.lenovo.com/us/en/downloads/ds027444
    First section:
    1. Download the OKR8 file. You'll need to install utorrent or bitorrent if you downloaded it as a torrent and not my personal file.
    2. Download, Install, then Open PowerISO.
    3. Select - Tools - Create Bootable USB drive - Select Yes to Run as administrator - Find the OKR 8.iso on your hard drive and burn to the USB stick.
    4. Next create the windows 8.1 usb stick as well. Download Windows 8.1: http://windows.microsoft.com/en-CA/windows-8/create-reset-refresh-media
    5. Run the Microsoft file and select English > Windows 8.1 and > 64 bit
    6. Burn the Windows 8.1 to USb through the software.
    7. Relax and have a coffee while it creates the usb stick.
    8. Download and save the necessary lenovo drivers onto another USB stick, external hard drive or onto one of the 2 USB sticks you are already using. Valuable if you only have one computer.
    Please note: You install all this stuff at your own risk. Propertly back up and save all your old personal data first onto an external hard drive. This process will wipe everything off your drive, including all the paritions (including the old recovery parition if you have one there) and you'd won't be able to get it back.
    Having access to two computers is helpful. But if done property you should be good with one. I will not be responsible for any mishaps. This is cowboy computing. Typically for people with too much time on their hands or who are obsessive compulsive types
    Second section:
    1. Turn off computer.
    2. Press Nova button, wait, enter into Bios. Goto to boot mode and switch boot from UEFI only to 'legacy mode". This allows you to boot to the OKR 8 USB your prepared.
    3. Shut down computer
    4. Insert OKR 8 USB
    5. Press Nova button again - Select Boot- Select - USB drive with OKR 8 on it.
    6. Let the OKR 8 USB load. - A Windows 8 screen comes up.
    7. Once it loads click the check mark and hit the button with chinese letters. This whole software is in Chinese and not in English. Don't worry.
    8. Wait patiently. It will say 'done' but it's not all done until the popup windows appears and says All Done. Then REMOVE the usb and reboot.
    9. Important* - Reboot the computer and let the OKR 8 software load and install on the recovery parition - It finishes the installation after you reboot. It will reboot again and load into the One Key Recovery Panel software.
    Yay! Now select shutdown from the One Key Recovery environment.
    10. Press Nova button again > enter bio > and switch back to UEFI mode. *Important* If you try to install Windows through USB legacy mode. You will get a GPT error when trying to install windows onto the hard drive.
    11. Shutdown again.
    12. Insert the Windows 8.1 USB. Press the Nova button again. Select Boot Options: Boot from the Windows 8.1 USB.
    13. Windows 8.1 loads. Select Install.
    14. Choose Custom Install and Install Windows 8.1 to Parition 5 - "Windows8_OS"
    15. Let Windows Install. Remove USB stick when asked.
    16. Reboot. Go through standard windows setup. Install all drivers and program you want in preparation to save the intial factory recovery state.
    17. Get your yoga 2 pro or laptop up to the initial specifications you want and then shut down.
    Section 3:
    1. Now it's time to create the initial backup onto the hidden recovery parition so you can reset the laptop back to inital specs whenever you wish including when you want to sell or give away the laptop..
    2. From a shutdown state - Goto system recovery through novo button again.
    3. Once it's loaded press CTRL+Shift+O to pull up the command prompt window (Shift + F10 was previously suggested. It did not work for me, maybe on older machines)
    4. At the command prompt type in: diskpart
    5. type: list volume
    6. Look for the letter of volume that is labelled PBR_DRV (eg. H) - This is the hidden Lenovo recovery partition where the initial factory backup image will be saved to.
    7. type exit
    8.  type: H: or whatever volume it is.
    9. Your directory should change to H:
    10.  Type: cd onekey\osimage > This takes you to the correct directory.
    11.. You're almost at the end!
    12.. Type: osimage /nopbr
    13. Type: osimage /fb
    14. Wait ten minutes while the initial backup is saved onto the hidden recovery parition
    15.. Profit!
    16. type exit - Reboot - You're Good to Go.
    17. Rock On!
    18. Enjoy Life again.
    Lots of work but worth it in the end !
    Should also work for when windows 10 comes out.

    As far as I can tell, Windows 8.1 is merely an windows update, so the license key from your BIOS should still work. If you already updated your machine to Windows 8.1, and a fresh install of 8.1 didn't complain about license key, then you should be able to create a new recovery image from it.  For Windows 10, if I am not mistaken, when you upgrade from Windows 7/8/8.1, some hardware ID is stored on a MS server to flag this machine has a windows 10 license, to make it possible to perform fresh windows 10 install in the future if needed. This means if you never have windows 10 installed, then you cannot use it to build the recovrey image (the key from BIOS won't work). But if you have 10 installed, you can always activate it during the process of creating recovery image.  Once again, all these are based on my knowledge and I haven't attempt to do them, so I cannot tell if this will definitely work. Try it and let us know

  • Hardisk partition and one key recovery problem

    Hi All,
    I am new to to the lenovo community. I  recently bought a lenovo G series machine( G550 model #298595Q preloaded with Windows vista and 320 GB  HDD) . surprisingly  The C: drive contained 254 GB of the total  available 284 GB and D: drive had the remaining space. I wanted to inistall linux, I had to partition the C:drive and no where in the lenovo mannual it is warned against the resizing  C
    I used a partition software called "paragon" to resize my C: drive. My system hanged while  running the process and after a long wait I had to shutdown my system and after that my OS was not loading.So I decided to recover my vista using one key recovery. I tried the back up I stored in D: drive  and in DVD and it is giving an error message that  "not enough space in the system"  and in the one key recovery menu the target location of the one key recovery is showing to D: drive  but my preloaded vista was installed in C: drive and also it is showing the total free space as 298 GB)
    Could any one help me to get my vista back.( why the target location of one key recovery is showing  to D
    or is there any way to increase the D: partition from boot setup). Please help me.
    and also my warranty is valid , since I touched my C: drive( no where it is warned against that)?

    I have posted this somewhere else, but it involves Win7, see if this helps:
    What I can tell you is that I spent a lot of time as well trying to mend the soft/partitioning and to get rid of bloatware!
    In short: I did a clean reinstall + recovered my OEM activation + partitioned the HDD as I wanted. Now it looks and reacts familiar (I used XP as well, before).
    BEWARE: trying partitions managers as Easeus or Paragon has blocked my partitions - they seem to be "coded" somehow.
    Do not hesitate: after you backup activation erase totally HDD (I used killdisc) and all shall be gone and you start fresh.
    Get a Win 7 serching for "digitalriver" Get ABW for activation restoring Get drivers from Lenovo support, install only what you need by function not all of them!

  • Lenevo ideapad s410 one key recovery service partition fails

    HiRecently i extend my C: drive by using the Mini Tools Partition wizard and also format and delete partition of my other data partition but i dint change any system or recovery partition. After doing that i cant recover from One key recovery,it says that cant find the service partition. Also i cant take any system backup.  Can anyone help me recover this

    Hi anup002,
    Welcome to Lenovo Community Forums!
    The OKR system depends on the Partition ID's of the HDD, Shrinking or Extending a Partition may render the OKR Not to work. 
     Restoring the OKR after a partition change may be a hard work.
    Please check this Article.
    http://forum.notebookreview.com/threads/how-to-restore-onekey-recovery-function-after-changing-partition-size-y580-and-maybe-others.688883/
    Regards
    Solid Cruver
     

  • How to use one key recovery-help!

    this is a follow to my querry last time since the machine that i have doesnt have the original OS installed contrary to what is indicated in its COA.
    i went to disk management and found these 5 drives:
    non-letter drive Healthy (OEM Partition) 14.75 GB
    C:  (system, boot,..., primary partition) 97.56 GB
    E: (Primary Partition) 324.35 GB
    LENOVO (D): Logical Drive
    unallocated drive of 101 MB
    what is a logical drive by the way?
    does it mean that i still have the Original OS? how will i use the One Key Recovery?
    Thanks in Advance...God Bless!

    Is there a OneKey Rescue System button on your PC? Did you create backup disks?

  • Software for Power Switch Control and One Key Recovery for Windows 8?

    Hi. I have recently upgraded to windows 8 with a clean install. I was wondering if there is software to get the power switch control software back so I can set it to auto, turbo or cool because without it I think using the switch is useless. I also would like to know if there is a way to get one key recovery back.

    I can't use the One Key Recovery of my Y2P anymore, as I decreased the size of the C partition in favour of increasing D:\Data
    OKR won't even start anymore...
    Any chance to get OKR working again if I make these partitions the same sizes?
    Who has the exact partition sizes in MB of the Y2P 20266 with Samsung PM851 256 GB SSD?
    0 1 MB  NO_NAME unallocated
    1 1000 MB  WINRE_DRV NTFS  
    2 260 MB  SYSTEM_DRV  FAT32 (EFI)
    3 1000 MB  LRS_ESP FAT32
    4 128 MB  NO_NAME Other
    5 ? GB  C:\Windows8 NTFS
    6 ? GB  D:\Data NTFS
    7 14135 MB  PBR_DRV NTFS Recovery
    8 327 kB  NO_NAME Unallocated
    Data is backupped daily and I already have a full system backup together with a bootable USB stick that has been tested.
    But I like to make sure I can reinstall Windows in the future..
    Freedom of Speech has just left the building

  • Ideacenter K330B One Key Recovery External Hard Drive

    Hello, a few months back I made a full backup of my system to an external hard drive. I reached a point where it was just easiest to start my computer over using the One Key Recovery. I had to go with the factory settings at least temporarily. Is there anyway I can use the external hard drive backup to restore my stystem? The One Key system doesn't seem to agree with it.
    Thank you for any replies.
    Sorry if there is a post like this elsewhere. I tried to see if their was and didn't see any that applied directly to what I needed.

    hi Nutcracker,
    When you tried to restore your backup using OneKey Recovery, are you getting any specific error message?
    Can you also try to:
    1. Format the external HDD with NTFS (move your OneKey Recovery backup to another computer first)
    2. Make external HDD's the partition active and copy back the OneKey Recovery backup image
    3. Boot into OneKey Recovery 7.0 and try to restore your backup.
    Let me know your findings
    Regards,
    neokenchi
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Lenovo G460 Windows 7 One Key Recovery with a Linux Partition

    Hi All,
    I recently bought a Lenovo G460 Notebook and installed linux on it to dual boot with WIndows 7. There was a problem with sound which I got fixed and everything is working fine now.
    My question is:
    Will me linux partition be there as it is If I recover the windows 7 partition using one key recovery?
    How to create a rescue disk from One key recovery?
    Thanks in advance.

    Hi nilankaraja,
    To create a rescue disk :: http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/onekey_recovery_46_user_guide.pdf
    On part of the Linux partition, are you asking if the partition will be saved ? Or is it something else?
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • One Key Recovery

    My G560 was puschased in the Kingdom of Saudi Arabia by a friend last March 2012 and was brought here in the Philippines and was given to me. the COA sticker says it has Windows 7 Home Basic OS but when i opened it, it has Win 7 Ultimate installed. now i'm getting a windows not genuine notification.
    i also found out that my disk drive 3 partitions, C, D, E.
    i would like to revert my machine to its supposed original OS but i don't have the original installation CDs that is why i'm thinking of using the One Key Recovery.
    will this revert my OS to its original state?will it affect my important files (located in partition E of the drive) should i choose the One key recovery?
    Solved!
    Go to Solution.

    You might want to search
    MiniTools Partition Wizard, I would recommend you dont use it to do anything with partition size or changing any mbr or partition info.
    MiniTools will allow you to look in that 14.75 hidden partition and see if the OneKey Recovery image is there... Sounds like its there. Shows zero bytes used in the disk management, but will have maybe 9gb oem image in it or several chained, to make your drive back to new.... exept I dont know how it will handle that logical partition..
    Little hard for me to figure out what you've written there. 5 drives ???? I assume the 97gb is marked Active.
    I am concerned your D unalocated drive is saying Logical. It should be same simple basic disk NTFS as the others. That is where the backup lenovo OKR was originally and where your backups normally might be if you dont have a remote drive to do backups to.
    or to keep data files or whatever you want there.
    I dont know if i should tell you or not, because again I don't know exactly what you have... but back it up... push the one key button. - see if it offers to restore it to new.
    If nothing really is in that unallocated partition marked logical... maybe do some web reading see if you can turn it back to a simple basic vollume first.

  • One key recovery is not working in g560

    i had deleted the partition D... now i m having two os linux and windows 7..
    when i m pressing the one key recovery button it willl display the msg like
    x:/windows/system32>
    how can i clear this problem..

    run one key recover under windows, burn recovery dvds then use them.
    probably linux installation has deleted some system files.

  • How to update one key recovery on a G580

    Hi guys, Does anybody know how to update the one key recovery to the current setup? If I allow it to make changes, will it update, or revert to the previous recovery point? Any help greatly appreciated, new to Lenovo, still not sure where I'm at with it Cheers Rick
    Solved!
    Go to Solution.

    hi roadrash,
    Welcome to Lenovo Community Forums!
        OneKey recovery Will access the Factory image backup installed hidden on your computer,
    It means that it will revert how you got the system from the store.
    Also
    Windows 8 Disk can be ordered from Lenovo(fees may apply).
    If you want to create an updated  backup
    On a Windows 8 / 8.1 what You could do is a Backup drive using this method.
    Hope this helps
    Cheers!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

Maybe you are looking for

  • Error while editing Workflow Task List Item - "Sorry, something went wrong.. Web must contain a discussion list

    I have an custom approval workflow and when I try to edit an assigned  approval Task it throws me an error Sorry, something went wrong Web must contain a discussion list Any help appreciated! Pravs

  • What are record groups for?

    hi, Could anybody tell me what is the main purpose of creating record groups whith statements like: create_group_from_query, populate_group, ... Every time we want to access any records we can use blocks which are based on tables or views which are i

  • How do I delete everything in Iphoto and start over

    I have given up trying to fix my library. I would like to delete everything in old library and hope I can reimport my pictures from disks and edit then again. how do I make sure everything that was in the old library is absolutely, positively gone so

  • SAP Table to get Cost Center Acct Line Items based on Cost Element

    Hello there, My question is pretty straight forward. Is there a way to get cost center document line items efficiently by just using the Cost Element(most specifically), Period, Posting Date, and Fiscal Year (Cost Center would help too)? I ask this b

  • Data Template using sql query

    Hi All, I'm trying generate xml data using data template approach. For this do i need to use XSQL to generate xml data? Can some one please tell me what is this XSQL and how it works? Thanks in advance,