Delimit end date for pay scale salary ranges (T510N)

Hi,
Some of the pay scale salary ranges (T510N) which we use are no longer valid and I want to delimit the end dates. Has anyone done this before ?
Appreciate if you can share the solution.
Thanks,
Rajesh

Hi Sarah, Harish
Thanks for your replies.
What I did was to copy the existing range, change enddate to 31.12.2009, and delete the old range. In the tests I have done, this seems to work. We don't use these ranges anymore but busiiness want to retain. Should not impact existing PERNR's.
Cheers !

Similar Messages

Sap hr problem in defining pay scale salary ranges

hi,
please someone help me
i am trying define pay scale salary ranges
through
img -> personal managment -> personal administration ->
payroll data -> basic pay -> define pay scale salary ranges
when i try to define pay scale salary range on salary margins window curreny field is greyed out so how to enter currency
i want to enter INR as i am working on 40 india

Dear Aparna,
For your first question:
Normally currency settings are done by FI consultant & also currency always in anywhere has to be defaulted. Just cross check i think some where you did the mistake mainly in payroll we will manually maintain currency in only one table "V_T510F_B" (This is table where we will maintain manually)
For your second question:
If your working on Implementation project it's not like where you will prepare questions and get answers from client
1. First you need to get AS IS document from the client & need to understand their business process.
2. According to that you will have to prepare one draft BBP then has to be shown to client.
Major challenges are
1. Finding PA & PSA.
2. Finding grouping Esg grouping & PSA grouping.
Ur's Mohan

Urgent-change the end date for a existing wage type.

Hi,
Can u pls let us know how to change the end date for a existing wage type.
The current end date is 30.8.2008 and we would like to change to 31.12.9999.
Rgds,

Use This report RPCLGV00
The Wage Type Distribution report enables you to display wage types for several payroll periods. It does not take into consideration differences resulting from retroactive payroll. The report shows the current values (number and amount) for each wage type. The report evaluates the payroll records that are marked with update indicator A when the report is run. Subsequent reporting runs may not give the same result if - in the intervening period - retroactive payroll has taken place for the evaluation period. The wage type distribution uses the data from the results table RT for the relevant payroll result. The employees organizational assignment is also evaluated from the payroll result. This data is taken from the Work Center Basic Pay table (WPBP).
The wage type distribution offers you the following options for evaluation:
Individual reporting for a specific personnel number or name.
Totals evaluation without specifying a personnel number or name.
You cannot use wage type distribution to run a report for several countries. You can only select payroll areas from one country for reporting.
Scope of Function
You use the following parameters to determine how the appearance of the wage type statement:
Wage type for evaluation
Enter all wage types that are to be evaluated. If you do not make an entry here, the system selects all wage types. Note that you can only select wage types that occur in the RT table.
Evaluation start date
Evaluation start date and evaluation end date define the evaluation period. Enter the year and payroll period for the start of the evaluation.
Evaluation end date
This parameter delimits the evaluation period. If you do not make an entry here, only the period from the period from the parameter Evaluation start date is evaluated.

How to Calculate End-Date for a given Startdate in business hours without holidays

Hello Experts,
I need to create a plsql function where we need to determine end date for a task. For this, input will be only start date & number of hours allocated for that task. Based on this input we need to exclude Business hours & need to include only Business hours. and in the end we need to achieve the end date after the hour addition to the start date.
Example : INPUT: 03-OCT-2013 12:00:00 PM /
                              Hours Allocated 30 Hrs.
Business Hours - 11 AM to 9 PM.
So time starts from or Startdate is Friday 03-OCT-2013 12:00:00 PM.
So If I want to calculate the end-date by adding 30 hours to it, it should come WednesDay 09-OCT-2013 12:00:00 PM because I excluded Weekends & considered only business hours that is 11 am to 9 pm.
I am not able to get any such guidance in Internet as most of the docs are having start & end date as input.
Please help!
Thanks in advance !!

Hi,
As Christ said, there's no nuilt-in Oracle function to tell whether a given DATE is a holiday or not, partially because there's so much local variation in holidays. You can write a function like that (see http://forums.oracle.com/forums/message.jspa?messageID=3351081 ), but creating a table will be simpler and more efficient.
I suggest creating a row for every date, whether it's a work day or not; that way, you can have variations in the schedule (e.g., schedule changes and
partial holidays).
CREATE TABLE work_calendar
(   dt DATE       PRIMARY KEY
                   CONSTRAINT work_calendar_dt
                       CHECK (dt = TRUNC (dt))
,   day_type       VARCHAR2 (8) NOT NULL
                   CONSTRAINT work_calendar_day_type
                       CHECK ( day_type IN ( 'HOLIDAY'
                                           , 'WEEKEND'
                                           , 'WORK DAY'
,   start_time     DATE
,   end_time       DATE
,   work_hours     NUMBER
,   work_hours_since_1970     -- or some point earlier than you'll ever need
                   NUMBER
,   CONSTRAINT work_calendar_start_time
        CHECK ( TRUNC (start_time) = dt)
,   CONSTRAINT work_calendar_end_time
        CHECK ( TRUNC (end_time) = dt)
This will let you do a lot of the calculations you need without a function.

How to set a default start and/or end date for New Events based on trigger date.

I'm using the CalendarActivityListener to get current row when clicking on an existing event. As per previous posts this listener gives you access to event detail including Start Date, End Date, etc.
However, what I want to do is to default the start (and end) dates for New Events based on the trigger date.
I've tried the CalendarListener and can grab the Trigger Date from it - however, I can't see a way to pass this directly to the popup/dialog I'm using to create the new event.
At present I'm putting the TriggerDate into the ADFContext session scope e.g. ADFContext.getCurrent().getSessionScope().put("TriggerDate",calendarEvent.getTriggerDate());
Then, I've tried multiple approaches to try and "get" the TriggerDate from session scope to drop it into my new Calendar Event basically, I'm trying to default the InputField(s) associated with the Start Date using the value from the session - I've tried
1. setting the default value for the InputField in the jspx using a binding expression i.e. value="#{sessionScope.TriggerDate}" - this actually sets the value appropriately when the jspx is rendered but, when I go to create I get a NPE and I can't debug. I assumed that it might be a Date type issue - it would appear that CalendarListener provides a date of type java.util.Date and that the StartDate attribute of my VO/EO/table is a DATE and therefore requires oracle.jbo.domain.Date so I tried casting it - to no effect
2. Using a Groovy expression *(StartDate==null?adf.context.sessionScope.TriggerDate:StartDate)* in my calendar's EventVO to default the Start Date to the same result
Any thoughts or ideas?

John,
Thanks for that suggestion - could not get it to work. However, I did manage a different approach. I finally determined the sequence of events in terms of how the various events and listeners fire (I think).
Basically, the CalendarActivityListener fires, followed by the listener associated with the Calendar object's Create facet, followed finally by the CalendarEventListener - the final is where the TriggerEvent is available and then finally, control is passed to the popup/dialog in the Create facet. So, my approach of trying to set/get the TriggerDate in the user's HTTP session was doomed to failure because it was being get before it had been set :(
Anyway, I ended up adding a bit of code to the CalendarEvent listener - it grabs the current BindingContext, navigates through the DCBindingContainer to derive an Iterator for the ViewObject which drives the calendar and then grabs the currently active row. I then do a few tests to make sure we're working with a "new" row because I don't want to alter start & end dates associated with an existing calendar entry and then I define the Start and End dates to be the Trigger Date.
Works just fine. Snippet from the listener follows
BindingContext bindingContext = BindingContext.getCurrent();+
*if ( bindingContext != null ) {*+
DCBindingContainer dcBindings = (DCBindingContainer) bindingContext.getCurrentBindingsEntry();+
DCIteratorBinding iterator = dcBindings.findIteratorBinding("EventsView1Iterator");+
Row currentRow = iterator.getCurrentRow();+
if ( currentRow.getAttribute("StartDate") == null)+
currentRow.setAttribute("StartDate", calendarEvent.getTriggerDate());+
if (currentRow.getAttribute("EndDate")==null)+
currentRow.setAttribute("EndDate", calendarEvent.getTriggerDate());+
*}*

Quarter End date for this period

Hi
I have current date, How could I get the quarter end date for this date.
for example
Jan 23 2005 - The quarter end date is Mar 31 2005.

needs testing
import java.util.Calendar;
import java.text.SimpleDateFormat;
class Testing
public Testing()
    SimpleDateFormat sdf = new SimpleDateFormat("yyyy/MM/dd");
    Calendar cal = Calendar.getInstance();
    cal.add(Calendar.MONTH,3-(cal.get(Calendar.MONTH)%3));
    cal.set(Calendar.DAY_OF_MONTH,0);
    System.out.println(sdf.format(cal.getTime()));
    cal.set(2005,10,15);
    cal.add(Calendar.MONTH,3-(cal.get(Calendar.MONTH)%3));
    cal.set(Calendar.DAY_OF_MONTH,0);
    System.out.println(sdf.format(cal.getTime()));
public static void main(String[] args){new Testing();}
}

End date for support of Solaris 2.5.1

Is there anywhere that the end date for patch support for 2.5.1 can be found? A link would be most appreciated.

www.sunsolve.sun.com
is the site where u will get all patch updates detail
cheers
Dhruva

Start and End dates for users in Enterprise portal

Hi Expert,
I have to maintain start and end dates for around 200 users in 4 different Java systems. When I export the file of users it does not capture the validity fields. Is there a way/script to automate this? Otherwise I will have to do it manually.

Hello
Please check below URL for User Import Format:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/abdd83c3333205e10000000a42189c/content.htm?frameset=/en/48/a96f43db653206e10000000a42189c/frameset.htm&current_toc=/en/43/05e450d1cd6e95e10000000a11466f/plain.htm&node_id=2802&show_children=true#jump2822
Regards,
Tapan Goyal

Previous month end data for report

Hi expert,
I have to calculate previous month end data for my report.
let say if user select 15 oct then he should be able to see 30 sept data.
I have calander prompt.
Thanks,

Hi,
Use presentation variable in date prompt.
Apply sql filter(covert to sql) on report as date_column= TIMESTAMPADD(SQL_TSI_DAY,-DAYOFMONTH(date 'presntation_variable'),date 'presentation_variable')
Refer : How to get LAST_DAY in obiee
Regards,
Srikanth

What is the default payroll frequency for Pay Scale Structure ?

Hi,
What is the default payroll frequency for Pay Scale Structure? How is it attached to Pay Scale Structure?
Saurabh Garg

Hi
The default frequency for any payroll run is 'monthly', which is subjected to manipulation according to ones requirements
Regards
Sudhir.

OIM 11g r2 ps2. Setting end date for role requests

Hi,
reviewing the new features document on oim 11g r2 ps2: http://www.oracle.com/technetwork/middleware/id-mgmt/overview/oim-11gr2-whats-new-1709505.pdf
it says "For example, in a request that involves multiple entitlements, the requester might be required to specify the start date and end date for each of the entitlements requested. OIM enables requesters to provide such information during request that can be carried all the way to approval and provisioning processes. OIM also provides an out-of-the-box scheduled task for entitlement grant and revoke based on the start and end dates specified"
I've been searching on the documentation and doing tests on a virtual environment before a poc to a customer and can not find how to use that feature.
Is it an OotB feature or it needs codification and extra configuration?
Any tips on how to achieve this?
Thanks in advance!

Doc links:
http://docs.oracle.com/cd/E40329_01/admin.1112/e27149/appinstance.htm#OMADM5296
http://docs.oracle.com/cd/E40329_01/admin.1112/e27149/scheduler.htm#OMADM743, tasks "Sunrise of Accounts and entitlements" and "Sunset of Accounts and entitlements".
Oracle Support Document 1951854.1 (Sunrise And Sunset Of Entitlements) can be found at: https://support.oracle.com/epmos/faces/DocumentDisplay?id=1951854.1
Joost

HT1222 Hi, what is the support end date for Quicktime 7.7.3?

Hi, what is the support end date for Quicktime 7.7.3?

Hi
<b>Have you tried reading the details of the PO Releaser using the BAPIs ?</b>
BAPI_PO_GETRELINFO
BAPI_PO_GETITEMSREL
BAPI_PO_GETITEMSREL            List Purchase Orders for Release (Approval): New as of 4.0A
BAPI_PO_GETRELINFO             Display Detailed Release (Approval) Information on Purchase Order
BAPI_PO_RELEASE                Release Purchase Orders
BAPI_PO_RESET_RELEASE          Cancel Release of Purchase Orders
<u>Related link -></u>
Re: How to fetch data from back end for PO?
Hope this will help.
Do let me know.
Regards
- Atul

What is the support end date for Firefox version 19?

I want to confirm the end date for support for version 19, is it February 2013?

we are still helping users who are using firefox 19 and lower also.

How to set up start and end dates for validity of contract account in FICAx

Hi,
Can anyone tell me where can I set up the validitiy period for the contract account in FICA. In contract creation, I could just see the contract validity start date. I also need to know the validity end date. Please let me know the solution asap.
Points will be awarded for all the useful answers.
Thanks
Santosh

Yes, you're right, you would then need to develop a lot of user exits to prevent the re-use of the contract account after the validity date.
I'm think in a strange solution, it could work but you'll need to test it. if a contract account is marked for deletion (Field FKKVKP-LOEVM equal to 'X') no further action can be made over it, When you create you contract account you can schedule a change using as validity date (Field BUS000FLDS-VALDT ins the change contract account screen) to the end date of you contract account and set this deletion flag. then you run FPP2A to activate the schedule changes, before you get to the end date the flag is not set, when you get to the end date FPP2A will activate the flag and the contract account becomes not usefull.
If you do this, you have be careful because all the postings to the contract account won't be possible, it means that if there are payment to be made, interests to be calculated, etc... nothing will be posted.
Cheers,

Validity End Date for A012 relation not updated

Hi All,
I am working on SRM5.0 and the HR org structure is replicated from ECC to SRM via idocs. Now, for one particular user, who holds position in 2 org units, the HRP1001 table data is incorrect.
For one of the relations A012 between S-O, the end date shown is in the past. I checked the ECC tables for this employee and the A012 relation is valid till 31/12/9999. But, in the SRM system, this date does not get updated.
Due to this employee is not shown as an approver for that particular org unit.
Does anyone know how I can update this date?
Regards,
Ancy

One of the Org unit is under the other org unit. So, I updated the position with the relation to the higher org unit only. So in the SRM system, by default, the supervisor for this org unit is the supervisor for the lower org unit too, unless there is a new supervisor for the lower org unit.

Delimit end date for pay scale salary ranges (T510N)

Similar Messages

Maybe you are looking for