Delimit position

Hello All,
Whenever i run leaving action, employee is pushed on default position(i.e. 99999999). The relationship between S-P gets delimited. My client requires to delimit the position validity period when leaving action is run (i.e. position validity period should be equal to last day of leaving action)...
Is there any solution for this without any development being done...???
Regards,
Anand Patil

Judith / SC
Thanks for your suggestion.
Yes i agree with you that one can delimit the position may be noting the number and uploading at one go. Honestly client is not interested in doing such thing. They want to avoid the manual work.
SC- As you said i agree with you, there is no standard functionality. Its only i am trying find out some alternate solution if possible. Can dynamic action will work for this...?? Bit in a doubt....
Regards,
Anand

Similar Messages

  • How to delimit Relation b/w Pers# & Position in PP01 in sap HR

    Hi Experts,
    in PA30, while creating the record for my custom infotype, in my custom infotype i am providing Position.
    once save the record i am trying to create the custom(AZ08)relation with Pers# and Position. it is working fine.
    For creating Relation i am using FM
    CALL FUNCTION 'RH_RELATION_MAINTAIN'
            EXPORTING
              act_fcode           = 'INSE'
              act_plvar           = '01'
              act_otype           = 'S'
              act_objid           = p9006-zzpostn
              act_istat           = '1'
              act_rsign           = 'A'
              act_relat           = 'Z08'
              act_sclas           = 'P'
              act_sobid           = p9006-pernr
              act_begda           = p9006-begda
              act_endda           = p9006-endda
            EXCEPTIONS
              OTHERS              = 2.
          IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
          ENDIF.
    But the prob is if user want to Dilimit the record from PA30, system will dilimit the infotype record , and same time  i want to delimit the Relation also.
    can anyone give me the procedure like is there any FM to delimit the Relation.
    Thanks in Advance,
    Sumathi.

    Hi  sudha
    use function module   'HR_INFOTYPE_OPERATION'
    call function 'HR_INFOTYPE_OPERATION'
    exporting
    infty =                                         "pass info type
    number =                                   "emp id
    subtype =                                  " sub type
    validityend =                              " end date
    validitybegin =                          "begin date
    record =                               "pass the record u want to modify or delimit
    operation =                         " 'MOD'   or 'DEL'
    importing
    return =                                 "return parameter
    Regards,
    Ravi

  • Delimit the existing positions

    Hi,
    Our organisation structure is 3-4 years old and was not maitained properly due to which there are many org units and positions are idle or outdated as on today.
    We are planning to create new organisation from this financial year and for that we need to delimit all earlier org units and positions and their relationships and start with the fresh one.
    Can sombody guide me how to go about it.
    Is there any report to delimit all the postions, org units and their relationships at once??
    thanks

    Hi,
    You can use function module HRIQ_DELIMIT_ANY_OBJECT to delimit all of the organizational objects (org units, positions, etc). You may make you ABAPer write a code using this FM.
    Regards,
    Dilek

  • Vacant Positions Deletion/Delimit

    Experts,
    We have not maintained Vacancy Infotype for any of the positions maintained in the organization. But we can wee there are more than 10000 vacancies are pending in our organization which needs to be deleted or delimited.
    Kindly provide me solution on the same at the earliest.
    Regards,
    Devendra.

    Something along the same lines of delimiting, but a pre-cursor to the process.  Identifying vacant positions - Running report S_AHR_61016509, and get an error message stating that I need to specify an object ID?  I want to be able to run the report open to ensure all vacant positions are identified?  Has anyone ever had that issue?  I am wondering if there was some type of setup that was missed when implemented?
    Please advise.
    Thanks.

  • Error message while changing the delimit date of a job in ppome

    Hi experts,
    I have delimited a job in ppome to date 11.05.2011. But now i want to remove that delimit date and change it to unlimited(31.12.2999). when iam trying to change the delimit date it is showing a popup message 'select a date between 15.11.2008 and 11.05.2011'. Can anyone say why it is showing this message. how can i delimit that job again to 31.12.2999.? Same problem with the position also.
    Pls help...

    Dear Priaynka,
    Thanx for ur reply, I am again furnishing below the details:-
    I have to change the Valuation Class of the material :-
    7 POS for which Goods Receipt & Invoice Receipt have been done from period 1 to 7.
    1 PO for which Goods Receipt & Invoice Receipt have not been made.
    All the material reced in period 1-7 have been consumed by MFBF. Now no material is available in the material in that plant.
    Should I change the valuation class by deleting the line item of all the PO's  7 POs + 1 PO.
    Please advise, as the fresh PO will be made with new val class and GR/IR and Consyumption will happen after the change is made.
    Please advise if I am wrong in the procedure.
    Regards,
    Alok

  • Delimiting Position and Org unit for a deleted PERNR

    Hi Folks,
    We are facing this problem in Production. The PERNR was deleted , before deleting any relationships in OM. so when we try to delimit the Position we get an error:  'Personnel number xxxxxxxxx does not exist'. And we are not successfull in  Delimit that Position. Please suggest the solution.
    Your Help and inputs will be greatly Appreciated.

    Assign this position to other existing employee for temporarily from the same date for 100%. And Delimit the position before this date or delete it. If not possible use the Obsolete infotype to make it obsolete from here after.
    Then assign the employee to old position.

  • RHINTE00 - Position and org unit deleted in infotype 0001 not transferred

    Hi all,
    we are using report RHINTE00 to transfer the assignations with positions and org units made in infotype 1 to PPOME.
    Everything works fine when we are assigning a position and org unit.
    But when we remove the entry and run the report, the assignation in the PPOME still exists..
    Do I have to do something special to delete the relationships ?
    thanks in advance !!

    Hello,
    If you have terminated some employees, to remove relationship without existing objects, you have to use report. RHCHECKRELATIONS. Then if you just need to delimit them, make sure that org. unit exists in table T527X and rerun report RHINTE00. Hope it helps,
    Regards
    Christine

  • Changing personnel area/subarea (IT1008) from org unit to position

    We are live with PA and Org. Mgmt, but have been advised to change the infotype 1008 data - personnel area and subarea to be stored on the position instead of the org unit (where we have it now).  A big reason for this is we have cases when we need to overwrite the personnel subarea at the position level.  For example, a position belonging to an org unit with subarea ABCD, may really be in subarea WXYZ.  Therefore, even though the org unit is ABCD, it will be overwritten at the position level to WXYZ.  My understanding is that the RHINTE30 program will not work approrpiately if we are maintaining the data this way. 
    In transaction PPOME there is an account assignment tab on the org unit with cost center (filled in) and personnel area/subarea (which will be blank moving forward since that data won't be maintained on the org unit).  Then, there is also an account assignment tab on the position with cost center inherited from the org unit (sometimes needing to be overwritten at the position level), and the personnel area/subarea data.  My question is how should I handle the view of PPOME for this data?  Can I hide the personnel area and subarea on the account assignment tab for the org units only so it is not confusing for the users?  The problem with having it this way is that personnel area and subarea are blank on the org unit and filled on on the position.  They are conflicting and both visable/maintainable to the User.  Any advise please?  Thanks!

    Hi Nish,
    I gave you my input on your other related message and now will go for this one.
    As I commented on the other message, RHINTE30 will not integrate infotypes 1008 and 1013. So you don't have to worry about using this functionality (first part of your message).
    On the second part (personnel area / subarea on position rather than org unit): there are some considerations here that are more functional / process driven than technical. From a technical point of view, everything can be done. You can hide data from infotype 1008 on the tabstrip for your org. unit using dynpro handling, even via customizing. You can even transfer the data from infotype 1008 on the org. units to the positions or delimit it on the org units. There are some quite easy ways of achieving this using the LMSW tool (have you used it? I can forward some documentation).
    But personally, I would not recommend to do this from a process point of view. Everything in SAP HR is about the inheritance concept, and I think this works very well when it comes to org. units and positions. It is normally advisable to record personnel area / subarea on the org. unit level. This will be inherited by positions (even if you cannot see it at position level in PPOME) and thus defaulted for the employee. At position level you should handle only the exceptions, which will be in turn also defaulted for the employee holding the position. In this way, data maintenance is minimized. If you delete (or do not use from now on) information about infotype 1008 on org. unit level, your HR department will have to maintain this every time a position is created, and even in cases in which a position is shifted from one org. unit to another one.
    In my opinion, you should address this with your HR department and explain the concept and the consequences of maintaining all at position level. It would only be advisable to do it if the org. unit structure is very cross-personnel areas and subareas. If it is a matter of handling exceptions, again, I would recommend to continue recording this data at org. unit level. All in all, if the data is not recorded on the position and you need to see which is its personnel area, you just need to double-click on the org. unit above.
    Just wanted to let you know my opinion, of course it's your decision. By the way, I'm of course not aware of other possible implications like home-developed reporting and so on.
    Regards,
    Rodrigo

  • After changing cost center assignment to Orgunit or Position in OM.......

    Hello,
    i delimit the relation between cost centers and orgunits or positions with the sap report RHGRENZ4 and created new relations in PP02 by a batch input map (which i create with the LSMW). This seems to work fine in OM but although the Integration to PA is active, the changes i make have no effect to infotype 0001.
    The value in the table T77S0 for PLOGI - PRELU is blank.
    When i run the report rhintecheck i find my entry. but when i run the report rhinte30 the report does nothing!?
    I have no more idea!!!!!!!!!!!!!!!!!!!!!!!

    Hi
    Please check the following:
    1) table T77S0
    PLOGI     PLOGI  – 01 ( 01 is your plan version)
    PLOGI      ORGA  -  X  
    2) Report RHINTE30 - Dates when the changes should be effective in IT 0001
    3) You have sufficient authorisations to the objects & relationships.
    Thanks & regards
    UR

  • How to delimit business roles in Org Strucutre

    Hello,
    I have a requirement where in I need to schedule and delimit business roles in the organisation structure(ppoma_crm).
    Business Requirement: Short term assignment of the Sales executive to Sales manager (Duty manager) role.
    The main issue is how to automatically remove the assignment (in tr. ppoma_crm) after the approved period expired?
    A particular scenario is such when a sales executive is assigned a sales manager role in the latter's absence for a limited period of time say 1 week. Another req is to assign such a role say one week ahead of scheduled date (set on 14.2.12 for the role to be effective on 19.2.12 for a period of 1 week) and then automatically delimit it on 26.2.12(1 week after 19.2.12) without manual intervention and the need to check for such cases manually, because there could be multiple assignments.
    Currently, we have business roles assigned to posiitons. I can only delimit the business roles on positions in the Infotype for Business Roles in transaction PP01. Need a way out for my requirement. I need a way to schedule and delimit business roles in the org strucutre.
    Suggestions and possible solutions awaited.
    Regards
    Varun Taneja

    Hello Kannan,
    please check notes
    1013201 - Hardware & Software requirements
    1013139 - Pre-requisites for the BI 7.x frontend
    1013207 - Installation guide
    1013140 - BI Frontend / BW Add-on - General Information & Limitations
    BEx Analyzer works with MS-Excel only.
    BR
    Ondrej

  • Position to Requisition relationship not delimiting

    Hi Experts,
    In SAP E Recruitment, when ever a requisition is closed from Front end by recruiter then in OM position to NB relationship is not delimited.
    Is this a standard behavior of SAP E Recruitment.
    Regards
    Puneet

    Hi Puneet,
    E-Recruiting doesn't delimit the position on HR side automatically.
    Regards,
    Nicole

  • To Delete all the existing positions

    Hi All,
    Please guide me if I want to delete ( not delimit) all the existing positions from the System so that I can start fresh.
    Best Regards,
    Amit

    Hi Amit,
    You can delete using PP02.
    First delete the relationships Infotype 1001 and then object Infotype corresponding to that position.
    Reward if helpful
    Regards
    Tomesh

  • BAPI to update Employee position?

    Hi All,
    what is the BAPI to update an employee's job title/position.
    Thanks
    Thruna
    Moderator message: please (re)search yourself before asking.
    Edited by: Thomas Zloch on Nov 4, 2010 10:51 PM

    very nice explaination on Bapis is given on this link please check.
    without so much technical stuff and in simple terms u can say. They are Function Modules only that they are SAP provided Remote function calls. meaning. Function modules can be used only within SAP, where as Bapis can be used from outside SAP,thru external applications.
    if u want to understand using an HR example.
    consider ur company has Intranet portal or any other front end which all the employees are comfortable using. but the company wants to use SAP. and they r not comfortable with SAP interface.they want to continue using their own old portal for various reasons.
    in such scenarios, although front end is different portal, it connects to SAP in the back end. the employers do not know that whenever they r changing their phone no/email id etc in thier portal in back end its getting changed in his employee master in IT0105 in SAP.
    So how are tey able to acheive this? inputing data in different system but updating SAP system? well thats where BAPIS come into picture. SAP has exposed certain functions to be accessed remotely thru external systems..for such functions it provided BAPIS. in this case of communication SAP provided
    BAPI_EMPLCOMM_CHANGE Change communication
    BAPI_EMPLCOMM_CREATE Create communication
    BAPI_EMPLCOMM_DELETE Delete communication
    BAPI_EMPLCOMM_DELIMIT Delimit communications
    BAPI_EMPLCOMM_GETDETAIL Read communication This is just an example.
    go to TCODE: BAPI and check out all the bapis.
    go to TCODE: SE37 give a bapi name and read documentations/see source code/etc.
    Bapis manipulate SAP business objects,thru API methods.
    with this descriptions as a base, try making sense out of what BAPI is by reading above link and other material.and come back with more precise quesions.
    To use bapis u require different authorisations..usually authorisation object s_rfc is given
    inputs given by hurser
    this may be helpful
    sikindar

  • Delimiting positions during an action

    Hi all,
      when we 1st implemented, when we did an action (i.e. employee transfer) we recieved a popup asking if we wanted to delimit the previous position, now for some reason this isn't happening.
    Does anyone have a suggestion as to how to turn this on?
    Any help would be appreciated!!!
    ~M. A. Brown

    Check the value for PPVAC in table T77S0.. it should be 1 for the pop-up to be effective..
    ~Suresh

  • Procedure to Delimit Infotype 1613

    HI,
    I need to delimit infotype 16313 for about 350 positions whcih are assigned to single Worker compensation code. Accept PP02 anyone pleasee let me know hos can i do this in bulk. Is there any fast entry or any programe to delimit WC code entries for all the positions at a time?
    Please help me in this.
    Thanks & Regards,
    Naga

    Hi Naga,
    Try transaction RE_RHGRENZ2.
    Good luck,
    Dilek

Maybe you are looking for