Delimiting HR assignments through PPSM for a set of employees

Dear All,
Can any one guide me how to delimit the set of employees assigned for a WBS.
Thanks in advance
Regards
Karunakaran

closing the issue

Similar Messages

CAT2 - Default different absence types for different sets of cmployees

Hi all,
I have ben trying to do this for quite a while
I am trying to default different sets of absence types for different sets of employees ( diff employee groups)
I would ideally not want to create different cats profiles for these employees.
Has any one done this before.
I have chedked the user exits cats0002, the badi cats_derivatives and the customization but could not find a way to do this. Any ideas on how to do this w/o defning new cats profiles for each type of employee?
regards
Raj

Enhancing 0315 wouldn't help.. starightaway.. you would still need to add code to default the A/A type.. & CATS0002 kicks in after User input.. looks like you will need to modify Std code..
~Suresh

Can we lock set of employees at a time?

Hi everyone,
I need to maintain Infotype records for a set of Employees. Function module 'HR_EMPLOYEE_ENQUEUE' locks only a single employee at at time. I can pass pernrs through loop...endloop, but if there are multiple records of a single employee, lock and unlock happens for every loop.
Is there any FM to lock multiple employees?
Thanks in advance,
cs

Hi cs,
Please use FM HR_ENQUEUE_OBJECT_LIST with object type P.
Regards,
Dilek

How to add a new custom field to one set of employees within one country?

Hi,
I am thinking of a scenario where a new custom field is dispayed in PA30 for IT0006
only for one set of employees in US (such as for a employee group or employee sub group).
Other employees should not have this custom field.
All employees in this scenario is for US country only.
Is this possible? Do we need ABAP for this or only IMG will do?
Any details on how to implement this etc..
Thanks for any help.

Thanks for everyone for the responses.
I really liked the decoupling infotype solution.
However, since some work has been done in the old way, I will try to describe the problem in detail.
Our ABAPer already created a new screen 0200 as a sub-screen in ZP000600 module (I am assuming it is a module pool) using PM01 and assigned to 2010 screen; an alternate screen specified in IMG for country 10 as key (instead of standard screen 2000 for IT0006).
This new screen 0200 is assigned to 2010 in PM01 transaction.
These steps displays the 0200 sub-screen with added fields to all the US employees hiring in the respective personal action.
I want to create a new scenario to suppress these additional fields for some US employees (say company code BKUS)
I placed a new entry in T588M for module pool as ZP000600 , key is 10, alternate screen as 0200 and hide all the fields
But, these additional fields are still displayed always for US employees for whom I want to hide.
Did I miss any thing?
I do not want to hard code in ABAP whom to display and who not to.
Is there a IMG way to do this so that I can change the criteria later as we go.
Thanks

When I try to reset my iPad mini it keeps asking for a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?

I know my passcode is correct but when I try to reset my iPad mini it keeps asking for a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?

If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

I tried to sign in for icloud set up with my apple id, i received a message that your account limit has reached, how to get icloud access then?

i tried to sign in for icloud set up for the first time with my apple ID, But unable to get through as i receive a message saying your account limit is reached, then how to proceed.

I can't say why it should be doing this. If it persists then your only options are to set it up on another Mac or iOS device if you can (then you will be able to sign into it), or failing that to contact Support - though I don't know how helpful they are likely to be.
To contact iCloud Support: if you currently happen to have AppleCare, either because you recently bought Apple hardware or have paid to extend the inititial period, you can contact them here:
http://www.apple.com/support/icloud/contact/
You will need the serial number of the covered hardware.
If you are not covered by AppleCare, then - in common with other free email services - there is no free support and you may be asked to pay a fee.

Easy way to schedule a job to run for a set period?

Is there an easy way to schedule (dbms_scheduler) a job to run for a set period -say, half an hour- and then to stop.
Currently, I schedule a procedure to do the work (a bunch of inserts or updates, say) and the first line of that procedure assigns sysdate to a variable when it starts. Then as the procedure loops through its work, I compare the current sysdate with that original one, and if the new sysdate>original one by more than 30 minutes, I raise an application error. But it's messy, and I was wondering if there was a nicer way of doing it?

"Admin" -I think you'll find that 'end_time' merely states a time after which the job will not be run. It doesn't do anything to kill off a job which is already running at the time that comes round. Similarly, repeat_interval merely states how often the job should be run, not a time interval within which it must run and outside of which it must stop being run.
Satish: your suggestion looks great. Do you have, or know of, any examples where that is used, though? The doco you pointed to says the parameter raises an event, but that it's up to my event handler to deal with it. I wouldn't have the first idea of how to deal with this in code myself. If I could see a simple example, it would help a lot! Unfortunately, that page doesn't contain such an example!

I am unable to see the airplay icon on my macbook air, iphone or iPad which would enable me to use my Bose speaker through airplay. I set this up in the UK but have taken my macbook and bose speaker travelling with through Thailand. Ive wifi in my room an

I am unable to see the airplay icon on my macbook air, iphone or iPad which would enable me to use my Bose speaker through airplay. I set this up in the UK but have taken my macbook and bose speaker travelling with through Thailand. Ive wifi in my room and am able to access the internet on my laptop, Ive also been able to through the Bose Soundlink air wifi set application connect the bose speaker to the Wifi too.
I am only able to play my itunes through my macbook speakers and cannot find the airplay button which should be next to the volume slide once turned down to less than 1/3 of the volume..

Thanks for your help. Since I'm uninterested in loading all my photos (the only option) into photostream, I won't be able to use the settings in ATV. I guess I'm just stuck with using iPhoto on my MB Air. Thanks again.
paul

Suggestion for a setting

hey i m Saad Kazi.i have an idea for setting in all iphones today i am using My iPhone i turn it off to change my sim.when i restart the phone after installing the sim,there comes an option that says iPhone required your password after restart.no apps is workin uptil i entered my password.This setting give me idea if their password required for startup the phone,similarly if there a setting through which password is also required to turn off the phone(whenever the phone is manually poweredoff it required password)is a very good ide.for example month ago my friends some how hide my phone to prank me In university.when i ask for my phone they say they don't see it and when I tried to call it from other cellphone they switch off the phone so that i think that my phone is thieft or steal.well I got my phone after a huge treat.....so from here i got the idea for a setting option to password required for turnoff the phone manually.it can also helps in tracking because tracking required network and powered off can't connect to internet.simply This is my iPhone it only turned off or on only upon my wish.please think about my suggestion whenever you are making new iOS.....thanks an iphone lover ❤️❤️

This is a user-to-user support forum (not Apple); you can make a suggestion to Apple at: https://www.apple.com/feedback/iphone.html

Content server for Document attachment through "services for object" Icon.

Guys,
I have typical problem in installation of Content server for storing external documents.
We all know that we can attach the document in SAP using the icon SERVICES FOR OBJECT. By this we can attach the document to the specific object we want.
-Since my client wants only document attachment method not to completely implement SAP DMS, I proposed this method of attaching documents through services for object method.
-If documents are stored though services for object ,The attached document will directly get stored in sap database(correct me if I am wrong) while in DMS it ask you to select the storage location while u check in for any document
-By storing the doc thru "services for object " For long run when we store the documents in sap database our system will drastically get slow down.
-In this regard I have a plan to incorporate external storage server.
-Now I should know that how I should customize content server configuration so that the attachment through services for object will store into this content server I need to know how to define Client, Content Category, Content Repository, Document Area, Physical Machine, IP Address, Port. (OACT & OAC0)
I appreciate for immediate solution and Points will be rewarded for sure.
Regards,
Murali.S

Hi Murali,
Don't Worry, its possible,
All attachments can be stored in SAP Content Server also, but through archiving process.
Set up a database storage system.
Preparation
Make sure that the HTTP plugin is active.
Transaction SMICM, "Display Services" function key (shift F1)). The list of services must contain a port other than 0 for HTTP.If not, you must adjust the relevant profile parameter.
Typical entry:
icm/server_port_0 PROT=HTTP, PORT=1080, TIMEOUT=900
Make sure that the /sap/bc/contentserver service is active.
If no user is defined, then use transaction SU01 to create a new user. Use the "System" user type.Assign
the SAP_ALL and SAP_NEW profiles to the user. (Eg: HRUSER/PLMUSER/PPUSER etc)
Transaction SICF, select: default_host - sap - bc -contentserver. Select the function to display/change the service. Make sure that a user is defined.
Using the relevant data from the newly created user, maintain the anonymous logon data for the
/default_host/sap/bc/ service and save & activate the changes in transaction SICF. Double click on content server and give the user name which has been created (HRUSER/PLMUSER/PPUSER/MMUSER etc)
Check the system PSE.
Start transaction STRUST. Expand the system PSE. The system PSE must be "green" for each application
server.
Determine a suitable exchange directory.
The exchange directory must be accessible from each application server. If all application servers are running on the same platform (for example, Windows), one network directory that is accessible on all application server (for example,
server\share) is sufficient. You can generally use the global directory
(profile parameter DIR_GLOBAL).You can use the RSPARAM report to determine the profile parameters.
Setting up the storage
Create a table for storing the data. Using transaction SE11, create a copy of the SDOKCONT1
table. If you want to create the repository database, you can name the table ZCONT_DB, for example. Save the
table as a local object. Activate the table.
Create a repository.
Use transaction OAC0 to create a new repository.
Use the following parameters:
Repository Max. two characters, for example, Z1
DocArea: ARCHLINK
Storage type: R/3 database
Storage subtype: normal
Version no. : 0046
Contents table <table name> for example: ZCONT_DB
Exchange directory <directory name> for example:
server\share\
Make sure that the exchange list ends with a \ (or /on Unix).If you are using a variety of platforms, you must use transaction FILE to define a suitable logical file name and use this name. Save the settings.
1. Maintain view table TOAAR_C, via SM31
 Cross client table displayed as information, forget it
2. In field 'StSytm' you must entered 'Z1' as your system need, or anything that you need but you must configure HR Archive link too.
3. In field 'Arch.path' (direct above Spoolpath), entered path in your system, this real path in your operating system. May be you should confirm to your Basis consultant where exactly you could store picture files. So if you enter '/', your file exists at root directory at your UNIX system.
4. Choose 'File store' radio button
5. Save.
First
1. You have to create a number range for SAP ArchiveLink.
 IMG: Basis Components-> Basis Services -> SAP ArchiveLink -> Basic Settings-> Maintain number ranges
 (Trxn OANR). Create number range 01 from 0000000001 to 9999999999 without the external number flag.
2. Document type HRICOLFOTO must exist with document class JPG.
 IMG: Basis Components->Basis Services->SAP ArchiveLink->System Settings->Maintain document types
 (Table TOAVE, Trxn OAC2).
3. Document type HRICOLFOTO must be linked to object type PREL and Infotype PA0002.
 IMG: Personnel Management->Personnel Administration->Tools->Optical archiving->Set up Optical Archiving
 in HR. (View V_T585O, no Trxn). In the first two columns there are minuses, the third (Date) has
 a plus - don't put a flag in the check box.
4. Check which content repository (Archive) is linked to document type HRICOLFOTO and object type
 PREL. IMG: Basis Components->Basis Services->SAP ArchiveLink->Basic Settings->Maintain Links (Table
 TOAOM_C, Trxn).
Test
Test the repository.
Use transaction SE38 to start the RSCMSTH0 report. Specify your repository (i.e. Z1) and start the test.
The report must run without errors. If no problems occurred, you can use the new repository with Archive Link after you carry out the Archive Link Customizing. If problems do occur, check whether one of the related
notes helps.
For More Details :
http://service.sap.com/archivelink.

NOTE:- Screen Shots are missing, i was not able to paste here, One more thing is we did this for uploading a PHOTOS into Content Server, Similarly you have to create a REPOSITORY and Z-TABLE to bring all the Attachments from all the selected Objects and then route them to the CONTENT REPOSITORY.
Your Senior ABAP guy would help you in this, if not i may try to help you more by monday.
Regards
Rehman
Reward Your Points if Satisfied.

Check while MIGO, to check document is attched through SERVICE FOR OBJECT

Hi,
While creating a document through MIGO,
I want to apply a check that during 101 movement type if document is not attached , system should throw a error message
'Attach document first'.
Is it possible ?
If yes , then through which progess BADI or user-exit ?

Hi
The authorization objects for attachment to material are as following:
Object Class BC_Z Basis - Central Functions
Authorization Object: S_BDS_DS
Authorizations for Document Set
Authorization Field ACTVT : 30
Authorization Field CLASSNAME:BUS1001
Authorization Field CLASSTYPE:BO
other ACTVT
01     Create or generate
02     Change
03     Display
04     Print, edit messages
05     Lock
06     Delete
24     Archive
25     Reload
30     Determine
70     Administer
78     Assign
82     Supplement
Note: That to be able to attach user should have MM02 authorization..
Best Regards
Hope it helps

Command for: Access Mode for Result Set

Hi
Does anyone know if there is a command for "Access Mode for Result Set".
The default view for my characteristic in my query is "Characteristic Relationships".
I would like to have a command button for the user to be able to change the access mode to "Posted Values"
I have searched through all the commands but was unable to find this command.
OR if it is not available does anyone know the XHTML that I could enter into the web template.
Thanks in advance.
Ian

Hi
Does anyone know if there is a command for "Access Mode for Result Set".
The default view for my characteristic in my query is "Characteristic Relationships".
I would like to have a command button for the user to be able to change the access mode to "Posted Values"
I have searched through all the commands but was unable to find this command.
OR if it is not available does anyone know the XHTML that I could enter into the web template.
Thanks in advance.
Ian

Connect via P2 Interface to WSA S160 for initial set-up

Currently have deployed WSA with the following interfaces:
1/ Management : 1.1.2.2/24
2/ P1 : 10.10.20.14/24 (inside DMZ interface for secure network)
3/ P2: 8.8.8.136/28 (Public DMZ interface)
Issue:
I can not reach Management interface on segment at this time to run set-up wizard for configuring the WSA.
I can reach and talk to P2 interface via ASA 5540 which controls all inbound traffic to WSA.
How can I remotely reach WSA via P2 to run setup wizard via GUI for WsA set-up?
I know I must use http://IP_ADS:8080/8443 but how can I get there via public IP Address or proxy.
Note: I have a proxy 5.5.5.5 which I have built acl on 5540 to allow tcp 8080/8443 to 8.8.8.136.

Setup wizard can only be access through the management interface(M1). At this moment the only choice will be to connect via console.
You may also connect directly to the unit's COM port using a null modem cable (9-pin serial) in order to establish a command line interface (CLI) session. This is particularly useful during the initial configuration process of the device. In order to proceed, you will need the following:
9-pin female-to-female serial cable (null modem)
Serial console client (such as HyperTerminal or PuTTY)
Please use the following procedure as a guide:
Connect your laptop (or other client device) to the serial port on the back of the unit using a standard 9-pin null modem cable.
Launch your preferred serial console client. Specify the appropriate COM port to use on your local machine, and use the following settings for the connection:
Bits per second: 9600
Data bits: 8
Parity: None
Stop bits: 1
Flow control: Hardware (RTS/CTS, DSR/DTR)
Once the session has been opened, you may need to press Enter to trigger output. At this time, you should see a login prompt akin to what would be seen in a Telnet- or SSH-based CLI session.
Log in using your appropriate credentials.
Thanks,
Tery Le Febvere

Continuing a loop for a set amount of time

Hi,
I'm am trying to alter a previously written program have run into a problem.
The program is set up so that when the input exceeds a set level an output voltage to a buzzer is created; the buzzer continues as long as there is an input. What I need it to do is to continue this output for a set amount of time.
I've been searching the forum and found this straight forward solution from adamsjr.
"The easiest way to do this is to use a two Tick Count functions. The first
one is outside of a While loop, the second one is inside of the While loop.
Wire the first one through a tunnel into the While loop, add on the appropriate
ms (5*1000), wire the sum to one input of a compare function. Wire the
other input of the compare function to the second Tick Count function. Exit
the loop when the compare shows the second Tick count value is greater than
the summed value."
I've got placed the output subVI into a while loop and followed the above directions and this doesn't seem to work. I'm wondering if I would also have to include the input subVI into the loop or is there another possible solution
Thanks ahead of time,
Kristen

Hi Kristen,
You have the compare function implemented incorrectly. You need to make sure that the first terminal of the "Greater than or equal" function connected to the output of the sum, and the second terminal to the tick count in the while loop. The first terminal corresponds to x parameter and the second terminal is for the y parameter. So if x is greater than or equal to y, then the loop will need to exit.
You can see how long a subVI is taking if you put a flat sequence structure within your subVI around the entire subVI code. The first frame would only have a tick count going into an indicator, the middle frame your normal code, and then the final frame would contain another tick count wired into another indicator. Then you can subtract the second indicator value from the first and get hold long it took to execute the middle (core) of your code for that subVI.
I highly suggest using the highlight execution and probes and other debugging techniques such as breakpoints to diagnose where the data is being held up.

ConsoleOne lacking Date/Time-Format-Tab for Client-Setting

I remember from GW6 the Client-Setting-Tab in ConsoleOne for Date-/Time-Format (for local german format)
There is a tab with these settings in the GW8-Client, but I cannot find this specific setting in ConsoleOne.
Any ideas?
Sincerely
Karl

The availability in ConsoleOne with GW6.0 is confirmed. Now, since it seems to be gone with GW8.0, how would someone deal with the need of a central adjustment of this setting? At time I am running through the firm with setting this at the users workplace in the GW8.0-Client under Tools/Options/Calendar/Date-Time with hitting the button "Set to System" (or something like that - I have it in German).
Sincerely
Karl
Originally Posted by laurabuckley
Hi Karl,
Personally, I don't recall such a setting in ConsoleOne.
Sorry, not much use, just confirmation that you are not doing something wrong!
Cheers,

Delimiting HR assignments through PPSM for a set of employees

Similar Messages

Maybe you are looking for