Delimiting Org Unit

Hi All,
i have an issue. When i am delimiting an org unit using Po10 system is giving me a meassgae that
"IT1000 can only be delimited via Delimit Objects."
What does that mean? Also How can I delimit an object?
Regards
Aryan

Hi,
No it does not allow me to delimit object using Po10, PP01 or PP02.
Also in main screen of Po10 is i select the IT1000 and go to delimit icon in the proceeding screen i cant delimit
org unit.
Does it has to do anything with some logic or concepts?
How can i delimit object?
Aryan
Aryan

Similar Messages

  • How to find delimited ORG unit in a report?

    Hi All I need to find the org unit's which doesn't have end date as 12/31/9999 and delimited within 2 years in my report?
    How can we achieve this ...waiting for reply
    PS: I believe there is no LDB required..
    Regards
    Sas

    >
    > Hi,
    > Where are you stuck?
    >
    >
    HRP1000 table, field - OTYPE(check for "O" for org unit).
    > get the difference between BEGDA and GDATE(delimited on) and check if it's more than two years.
    >
    > Regards,
    > Sumit
    I want ORG UNITS whose END DATE is within 2 years????
    I Will give you scenarios
    If HRP1000 table has changed for some reasons'  and 5000(ORG UNIT) will create 2 records
    Ex: 5000  jan 1 2005 dec 31 2009
                    jan 1 2010 12/31/9999
    This 5000 should't pick up as it has end date 12/31/9999 ok...
    EX: 5001         JAN 1 2006  OCT 1 2007
                           OCT 1 2007   MAY 5 2009
    Last record:    MAY 6 2009  Feb 6 2010
    So this 5001 org unit should pick up as this last date is FEB 6 2010.
    Sas
    Edited by: saslove sap on May 3, 2010 1:59 PM

  • Activities under a delimited Org unit

    Hello,
    We have recently implemented EIC.
    Have a simple query,if we delimit a particular Org unit,whether activities under that Org unit can be processed or not.
    Thanks & Regards,
    sushil

    >
    > Hi,
    > Where are you stuck?
    >
    >
    HRP1000 table, field - OTYPE(check for "O" for org unit).
    > get the difference between BEGDA and GDATE(delimited on) and check if it's more than two years.
    >
    > Regards,
    > Sumit
    I want ORG UNITS whose END DATE is within 2 years????
    I Will give you scenarios
    If HRP1000 table has changed for some reasons'  and 5000(ORG UNIT) will create 2 records
    Ex: 5000  jan 1 2005 dec 31 2009
                    jan 1 2010 12/31/9999
    This 5000 should't pick up as it has end date 12/31/9999 ok...
    EX: 5001         JAN 1 2006  OCT 1 2007
                           OCT 1 2007   MAY 5 2009
    Last record:    MAY 6 2009  Feb 6 2010
    So this 5001 org unit should pick up as this last date is FEB 6 2010.
    Sas
    Edited by: saslove sap on May 3, 2010 1:59 PM

  • Delimited Org Unit(having end date Current date) are not coming in Bex output.

    HI All ,
    I have problem with BEx query output while using the Org. Unit Time dependent Hierarchy structure. In ECC side some of the Org. Unit nodes were delimited or their end date set to less than current date. Now this hierarchy is loaded to BW on daily basis those Org. Unit also laoded to BW hierarchy and these nodesare not coming up in our query output. Client wants to see these unit data as it important to him.
    Please suggest  .
    Thanks,
    Arvind Venai

    Hi Arvind,
    As per my understanding, the valid to/end date for Hierarchy should be 31.12.9999. May I know what is Valid To in your case?
    Did yo u check the change happend in ECC for hierarchy is reflecting in BW ?
    There mught be some restriction in BEx Query , please check

  • Delimiting positions assigned to a Org Unit

    Hi Everyone,
    HAPPY NEW YEAR!
    I have delimited a organisational unit through PPOME. Now I want to delimit all the positions ( vacant as well as filled positions) associated with that particular org unit.
    Is there any T-Code or program where I can delimit all the positions together or I have to delimit all the positions manually. Please let me know.

    Hi
    As far as i know you cannot delimit a position created.
    We need to close the position status from open to close for the position to be delimited automatically.
    If we try to delimit the position by entering a date the system will overwrite the previous one and create a new position from the next date of the delimited date.
    Ravee
    +91.99206.33669

  • Missing position and Org Unit relationship in PO13

    Hello SAP Pundits,
    I created a Position 1234 with transaction PPOM with Org Unit A and Job code X with start date 01/01/2009
    Now I hire an employee XYZ with this position X from start date 01/01/2009.
    When I go and see position X in PO13 it shows following relationships
    1)     Position 1234 - Org Unit A from 01/01/2009 to 31/12/9999
    2)     Position 1234 u2013 Job Code X from 01/01/2009 to 31/12/9999
    3)     Position 1234 u2013 Person XYZ from 01/01/2009 to 31/12/9999
    Perfect till now.
    Now if I change the Org Unit of the Position 1234 from A to B from date 01/04/2009 using PO13.
    A new record is created in IT0001 with start date 01/04/2009 and previous record is delimited.
    But now if I check the relationships in PO13 for position 1234 I donu2019t see the new record for Position 1234 and Org Unit B.
    However the previous relationship between position 1234 and Org Unit A is delimited till 31/03/2009.
    Why am I not able to see the assignment of Positon 1234 with new Org Unit B? Any reason why I am getting such an error?
    Thanks in advance.
    Regards,
    Ajay Hosur

    When you have changed the Position 1234 to org Unit  B from 01.04.2009 then the previous relationship will not show in po13, it goes into History which you can see in Complete Position Description..
    goto pp01 and select that position and create relationship with Org Unit B... am not sure why in Infotype 0001, previous record get delimited and new record got created..

  • Shift Org unit to another Org unit

    Hi Experts,
    I am trying to move one orgnaizational unit to another Org unit. The case is given below:
    Orgniazational Unit : "Stb Std" > under source : "INJ"  org unit. and also I want to make it with effect from 01/07/2011.
    Cost Center is not inherited of "INJ" org unit.
    Emp with position is already assigned under "Stb Std" unit.
    I want to delimit the unit on said date in destination Org unit "CQA".
    When i am delimiting the "Stb std" unit on 01/07/2011, it is not maintianing any previous record history.
    I am expecting below mentioned records after moving unit to destination:
    Org unit : "STB STD"  under source unit :"INJ" , Start Date :01/01/01999 , End date : 30/06/2011
    Org unit : "STB STD " under destination unit : "CQA" , Start Date : 01/07/2011, End date : 31/12/9999
    I want to keep relationship of positions and cost center as it is.
    Kindly help me to resolve it.
    Thanks,
    Nirali P

    Hi Gemini,
    Thanks for ur reply, But I want to know that Is there any history maintained in SAP when i moved 1 unit to another place?
    I want to maintain the history also. where i can see that history? I have checked in Relationship infotype but i didn't get it.
    I have tried to delimit it but the object is no longer due to delimit.
    Pls help me to solve it.
    Thanks,
    Nirali P

  • Problem with Org Unit Change

    Hello Experts.
    We have a problem here.
    There is an employee say : X in position ABC which belongs to Org Unit XYZ.
    Now, there is a change in the Org Structure. The postion has not changed, the employee belongs to the same position. But the Org Unit has changed to PQR and has a new chief.
    The problem is, in the SAP Portal, the Organization assignment is picking up the Chief of XYZ instead of the new chief.
    What could be the reason for this?
    Regards
    Avik

    Hi Avik,
    Check dates on records for ABCu2019s A|003 relationship to PQR and chiefu2019s A|012 relationship to PQR. Maybe the old records were not delimited and hence they are getting picked up.
    Donnie

  • Org Unit to Cost center relationship issue

    Hi All,
    When I assign a Cost center to an Org Unit, i dont have any issues and got created. But when I assign the same Cost center to a different Org Unit, it delimits the previous Org relationship and creates the new one.
    I checked the Relationship A011 time constraint and it is 2 which is with gaps.
    This is strange and should not work in this way.
    Thanks in advance.
    Cheers
    Vijay

    Thanks a lot guys.. I found the answer...
    Cheers
    Vijay

  • Org unit Creation

    Hi Friends,
    When I am trying to create Org Unit or position, System is taking default date as current date. even I am trying to create any new position with previous dates it is delimiting up to last date and again new record is creating from current date.
    Where to do modifications.
    Kumar

    Hi,
    While you are creating OM at that time you have to give the date.
    Other wise its take.....that only.
    Thanks and Regards,
    Revathi.

  • Separation Action: Infotype 0001, Org Unit not blank

    Hi  All,
    Can you tell me what has to be done for IT 0001 during Separation action?
    IT0001 is in copy mode in V_T588D for separation . The thing is, when i am trying to separate the employee, the position is defaulted to 99999999 but Org Unit and Job do not change, Which is ideally incorrect, the should be blank as position is linked to O and C.
    Can you help me resolve the issue?
    Reagards,
    Shweta

    Hi,
    when you said
    Which is ideally incorrect, the should be blank as position is linked to O and C.
    when you are hiring a person you are assigning a position then O and C are defaulted with that.
    if a person is getting separated then changing the position to default position is correct.
    there is no point in delimiting the O and C for the person at separation action.
    we dont have any default O and C as Position(99999999), with this pointer you can understand.
    Regards,
    mohammed

  • OM - Moving Org Unit don't change relat 002 between my Position

    Hi,
    I have a problem with my OM system,
    I have five org unit (A B C D E) everyone with one position head of own organizational unit, a b c d e.
    this is my hierarchy
    A
    (a)
         B
          (b)
              C
               (c)  
         D
          (d)
              E
               (e)
    I have this relat in HRP1001
    Org Unit     Positions
    A 002 B     a 002 b
    A 002 D     a 002 d
    B 002 C     b 002 c
    D 002 E     d 002 e
    I'm moving (with ppome transaction) org unit C with its position c, under org unit D.
    A
    (a)
         B
          (b)             
         D
          (d)
              E
               (e)
              C
               (c)
    After the moving in HRP1001, relationship between org unit has changed B 002 C (is delimited) D 002 C (is new).
    But, I don't have relationship between Position d and c (d 002 c), and relationship between position b and c (b 002 c ) is still valid!!!
    Org Unit     Positions
    A 002 B     a 002 b
    A 002 D     a 002 d
    D 002 C     b 002 c d 002 c
    D 002 E     d 002 e
    Could someone help me?
    regards
    Fede

    Hi Frederica,
    if I understand your problem correctly, I'm afraid there is a major design flaw in your OM.
    You have an Org-hierrchy with leader positions assigned to each orgunit and the "normal"positions also assigned to those orgunits. This is absolutely sufficient for the system to know, who is reporting to whom and standard reports, evaluation paths, structural auth., workflows all can be set up to work with this correctly. And this is best practise.
    BUT you also seem to be using a position hierarchy in parallel. A position hierarchy is really only meant to be a quick and chaep alternative for an Org hierarchy, if you don't want to create orgunits. There is no new information in there. It's completely redundant. And your problem is proof for why this redundancy is damaging: you get inconsitencies.
    I"ve seen this before. Whilst their might be good resons for it (I"ve never seen one), thsi is usually done by consultants, who don't understand orgmanegement or do understand that what they are doing is wrong, but rather have teh customer do double manual work with almost guaranteed inconsistencies than make an effort to properly understand struc. authorisations, reports or workflows. If you have no clue about OM, the extra position hierarchy can make some things easier.
    So, my recommendation is:
    1) check our, where the position hierarchy is used for reporting, workflow, authorisations or other things in your system
    2) replace this by the org hierarchy
    3) delete the position hierrchy (i.e. the 002 relationships between positions)

  • Moving Employee Org Unit to Another Org Unit

    Hello,
    +What is the best way and steps to properly move an employee from one Org Unit to Another Org Unit without messing up prior configuration. I need to move this employee from Manager (Org Unit A) to another Manager (Org Unit B).  Would editing the Org Unit number or changing the Org Unit number work. I have a exact new validity date as well.+
    Thanks

    Hello Remi,
    Thanks for your indepth reply. I guess there is some steps involved based on your ans.
    Per your answer: in PA, you create the Action for reassignment and take into consideration the possible changes to Quotas, Benefits, etc... is there anyway to keep prior info/configured data and bypass these steps - copy/paste/dragg feature to the new org structure- so data stays the same and no other possible changes occur.  I understand that position is linked to Org Unit. I can copy the position to the new Org/and then assign the position to the new Org Unit. Does the record automatically get delimited(prior record). Are there any additional steps to verify the data validity and that this employee got reassigned properly.
    Also how would I test the change before transf. it to production.
    Thanks

  • Org Unit Change Report

    Hi,
    I have an requirement, need to create report which specifies all the list of Org Units that are created and delimited during the given period.
    The report has to display any changes for Org. Unit in HRP1000, HRP1001 and HRP1008.
    Please suggest how to find out any changes occured for Org. Unit.
    Standard report RHCDOC_DISPLAY needs to be used for Org unit change history report.
    Regards,
    Sunil

    You need to maintain the Settings for "CHANGE DOCUMENTS" in the Config;
    use this IMG Path :
    Personnel management -
    > Organization management -
    > Basic Settings -
    >Activate Change Documents
    Execute the link Activate Change Documents and maintain all the settings as below;
    Plan Version : 01
    Object Type : S , O , (all the objects that you like to put )
    Infotype : 1001 / 1008
    Subtype : *
    Active :  Tick the check Box.
    You need to create One line per Object type;
    Ex :   
    01(Plan)                                   S (OTYPE)                         1001(ITYPE)                             *  (STYPE)                         Tick Mark (Active)
    Hope this would give you clarity.
    Regards,
    Anirban

  • Display Org Unit based on User logon in Business partner creation..

    Hi Gurus,.
    I have to assign Sales Org , DIV, Distribution Channel to the Business Partner in Sales Area data.  When I try system shows entire Org structure. But I want the Org structure should be displayed based on the user log on. Assume that, I am assigned to Shangai and creating Business partner for Shangai, the system should not show Beijing or other Org Unit since I belong to Shangai.  How to address this scenario thro standard customization?
    Is it common problem in CRM Webui(6.0 and 7.0).
    My Org Structure:
    Global
      China
         Shangai
         Beijing
       Nanjing.
    Thanks in Advance....

    Hi Varma,
    From my understanding of your problem, you can approach it in a different manner. Since, you mentioned that you will be receiving a delimited flat file around 5 to 6 times a day, you can probably consider coming up with a Report Program. This Report will consume the flat file, generate the necessary organizations, business partners, BP relationships and then create them and finish with the logging of all the messages ( Success, Error, Warnings, etc.)
    You can now schedule this report execution in a Batch Processing Job which will be executed as per the scheduled time and at the end of the day you can see all the application log files.
    This is just an approach and you can modify the report in your own way. I guess that the flat file will be located somewhere in the same place daily so that you can hard code the File Name and Path in the report.
    Regarding the Organization and Business Partner creation, you can use the standard SAP delivered BAPI's which will return you all the errors properly.
    Hope this helps.
    Thanks,
    Samantak.

Maybe you are looking for