Delimiting Positions

Hi experts,
Everything tried on IDES:
I tried delimiting the position through PO13/PP01 and by running the report RHGRENZ4 for changing the end date. I run the report via SE38 (which I understand is to be used by ABAPers only; if Iu2019m wrong, please correct me).
The problem faced for delimiting the position via PO13/PP01 was that the u201Cfrom-tou201D date fields are not active (i.e. they are grey), so could not make the changes.
So I tried,
Report RHGRENZ4 and input the data in all the required fields and executed, due to which I got the result on the next screen as u201CResult successfully changedu201D and saved it. But when I viewed the position (updated position) under organization structure, there was no change.
One thing more, when I saved the changes in the report RHGRENZ4, it took me to the screen ABAP Variant, wherein I mentioned the variant name and the short description as required and saved the changes. Since it took me to the ABAPersu2019 screen, so I understand that a functional person may not be allowed to run this report via SE38 in real time; am I correct or not? Please verify.
Highly appreciable.
Thanks n Regards,
Meenakshi

Hi Meenakshi,
I tried delimiting the position through PO13/PP01 ->>>>>>>
You have to use the Position menu (located at the top). Open Position menu and choose delimit. You need to provide the end date, unmark or mark historical record (depends on what you want) and then delimit.
And I believe this is what the system meant in "Infotype 1000 can only be delimited via "Delimit object" .
It will also delimit all other infotype records like relationships and others by the same delimit date.
One thing more, when I saved the changes in the report RHGRENZ4, it took me to the screen ABAP Variant, wherein I mentioned the variant name and the short description as required and saved the changes. Since it took me to the ABAPersu2019 screen, so I understand that a functional person may not be allowed to run this report via SE38 in real time; am I correct or not? Please verify.->>>>>
The functional person either can use SA38 to run the report or use TCODE - RE_RHGRENZ4 for executing the program. But the person should have authorization for this Tcode and the program and also for maintaining the data for OM objects. This you need to check with your security guys. Related to the variant screen that is generally used to create variant for the programs which we need to run on some frequency and with almost same parameters. So we create variants for the program adn then schedule a job for the program with that variant to pick the defaulted parameters. So when you are running by urself and enetering the parameters u dont need tio save the variant and also if you have authoraization for SA38 to run this program, I think you can also save avriant.
Last just go in SE16 and check the record in HRP1000 for the position you have ran the above mentioned report, the record should be delimited. Possibly in org structure as it will pick on current date and your delimit date might be later then the current date, so there u are not getting any changes.
Hope this will resolve ur queries
guds

Similar Messages

Delimiting positions assigned to a Org Unit

Hi Everyone,
HAPPY NEW YEAR!
I have delimited a organisational unit through PPOME. Now I want to delimit all the positions ( vacant as well as filled positions) associated with that particular org unit.
Is there any T-Code or program where I can delimit all the positions together or I have to delimit all the positions manually. Please let me know.

Hi
As far as i know you cannot delimit a position created.
We need to close the position status from open to close for the position to be delimited automatically.
If we try to delimit the position by entering a date the system will overwrite the previous one and create a new position from the next date of the delimited date.
Ravee
+91.99206.33669

Delimiting position -urgent

hi..
There is any fm for delimiting the position

Hi Varsha,
               Use SPLIT to delimit the values.I will just send a sample code for ur problem.
data : temp(30) type c value 'rh_delete_name',
         var1(30) type c,
         var2(30) type c,
         var3(30) type c.
split temp at '_' into var1 var2 var3.
Award points if helpful.
Kiran Kumar.G
                   Have a Nice Day..

Delimiting Position and Org unit for a deleted PERNR

Hi Folks,
We are facing this problem in Production. The PERNR was deleted , before deleting any relationships in OM. so when we try to delimit the Position we get an error: 'Personnel number xxxxxxxxx does not exist'. And we are not successfull in Delimit that Position. Please suggest the solution.
Your Help and inputs will be greatly Appreciated.

Assign this position to other existing employee for temporarily from the same date for 100%. And Delimit the position before this date or delete it. If not possible use the Obsolete infotype to make it obsolete from here after.
Then assign the employee to old position.

Delimiting positions during an action

Hi all,
when we 1st implemented, when we did an action (i.e. employee transfer) we recieved a popup asking if we wanted to delimit the previous position, now for some reason this isn't happening.
Does anyone have a suggestion as to how to turn this on?
Any help would be appreciated!!!
~M. A. Brown

Check the value for PPVAC in table T77S0.. it should be 1 for the pop-up to be effective..
~Suresh

Delimiting position will still be available in org tree?

Dear Gurus,
Can someone please get back with this query!!
When ever we terminate an employee, the term action which does not limit the position in the org tree. We get the create vacancy and when choose NO but the position remains empty but continues to appear in the organization tree. As of now the report RHVOPOS0 is being run to remove the object?
What best solution is suggestable please advice!!!
Regards
Asha

Hi,
There is no automatic way of doing this as far as I know.
One option may be to write a code to the user exit that'll run when a termination action is performed. This code shall delimit the position of the terminating employee.
In my client's case, we leave the positions vacant and when another person is employed, we assign the same position to this new person.
The decision is up to you.
Regards,
Dilek

Report to find "orphaned" positions?

Hi
We find that users have delimited relationship O-S and then delimited the Org.unit.
However the positions are still active, with active employees.
Is there a report that will list these orphaned positions?
Best regards
Kirsten

Thanks for the hint on the report. But as you say - not quite the scenario. The problem is that the positions ARE occupied - but have no relationship to org.unit.
Kirsten
PS - I imagine the report delimits positions - not deletes them? Or is it used just to remove postions no one has ever had?

Replace functionality at specified position

Hi all,
My oracle db version is 11g Enterprise Edition Release 11.1.0.6.0
i am trying to find out how to perform replace operation on a varchar2 data value which has a format delimited by '-'.
fior instance my dataset can be like
a-b-c
x-y-z-d-f-g-h
ab-dvs-p-qMy replace operation should be able to replace the delimited value at specified delimited position: something like
FUNC_REPLACE('a-b-c',2,'x') => results in 'a-x-c'
FUNC_REPLACE('ab-dvs-p-q',1,'Z') => results in 'Z-dvs-p-q'I have been trying to figure this out but no real luck yet.. please help
Edited by: Chaitanya on Dec 7, 2011 12:42 AM

Hi,
version without reqexp, a bit faster
with tst
as (select 'a-b-c' str,      2 pos, 'x' replace_char from dual union all
    select 'ab-dvs-p-q' str, 1 pos, 'Z' replace_char from dual
select replace( str
               ,substr( '-'||str||'-'
                       ,instr('-'||str||'-', '-', 1, pos)+1
                       ,instr('-'||str||'-', '-', 1, pos+1)-instr('-'||str||'-', '-', 1, pos)-1
               ,replace_char
from tst

Insert Issue writing to pipe delimited column multiple attributes.Drop Dead

Gurus,
drop dead date tomorrow, please help
Page won't write pipe delimited data to single column. Below is a sample from my VO. All three attributes reference a single column-different pipe delimited positions. Reference these values from page. No error appears when creating new "account" from page but after commit, no pipe delimited data is committed.
Any ideas?
substr(AcctMapEO.header_label_template, 1, instr(AcctMapEO.header_label_template,'|')-1) referencename1,
SUBSTR(substr(AcctMapEO.header_label_template,instr(AcctMapEO.header_label_template,'|')+1,instr(AcctMapEO.header_label_template,'|',1,2)-instr(AcctMapEO.header_label_template,'|')-1),1,40) referencename2,
substr(substr(AcctMapEO.header_label_template,instr(AcctMapEO.header_label_template,'|',1,2)+1,instr(AcctMapEO.header_label_template,'|',1,3)-instr(AcctMapEO.header_label_template,'|',1,2)-1),1,40) referencename3
Edited by: sreese on Sep 21, 2009 2:20 PM
Edited by: sreese on Sep 22, 2009 12:22 AM

Gurus,
Please help!
Ok, here's what I've done which should work but doesn't. I've created a new non-table Entity Attribute in my EO. Then created Transient Attribute in my VO and assigned to value from EO. In my page, I've referenced my transient attribute from VO Instance. In my EOImpl, I'm passing the attribute as a parameter.
No error occurs but Transient Attrib value isn't being passed into PL/SQL call like all other attributes. When I make the call below in TOAD, value is created properly.
public void insertRow()
try
OADBTransactionImpl oadbtransactionimpl = (OADBTransactionImpl)getDBTransaction();
String s = "begin spl_jdev_api_account_map.spl_create_acct(p_cont_cd=>:1,p_consolidate_cd=>:2, p_customer=>:3,p_req_asn=>:4, p_sonic_label=>:5,p_req_conversion_date=>:6,p_override_asn=>:7,p_vendor_name=>:8,p_building =>:9,p_revision =>:10, p_acct_lookup_use_whse_flag =>:11,p_asn_under_rcpt_tolerance=>:12,p_asn_over_rcpt_tolerance=>:13,p_created_by=>:14,p_creation_date=>:15,p_last_updated_by=>:16,p_last_update_date=>:17,p_cancel_asn_yn=>:18,";
String t = "p_use_flex_valueset=>:19,p_po_asn_yn=>:20,p_prepaid_ups_flag=>:21,p_eia_label=>:22,p_exe_flag=>:23,p_header_label_template=>:24,p_line_label_template=>:25,p_all_lpns=>:26,p_internal_asn=>:27,p_print_pickslip =>:28,p_replace_asn_flag =>:29,p_get_line_ref_flag=>:30,p_commercial_inv_flag=>:31,p_req_asn_search =>:32,p_asn_ship_days =>:33,p_asn_receipt_days=>:34,p_asn_creation_days =>:35,p_asn_conversion_flag =>:36,p_min_shelf_life_days=>:37,p_restrict_expired_pick =>:38,";
String u = "p_ars_rules=>:39,p_restock_ord_tgt_oms=>:40,p_attribute_category =>:41,p_attribute1 =>:42,p_attribute2 =>:43,p_attribute3 =>:44,p_attribute4 =>:45,p_attribute5=>:46,p_attribute6=>:47,p_attribute7 =>:48,p_attribute8=>:49,p_attribute9=>:50,p_attribute10=>:51,p_attribute11 =>:52,p_attribute12 =>:53,p_attribute13 =>:54,p_attribute14 =>:55,p_attribute15 =>:56,p_reflbl1 => :57); end;";
String v = (s+t+u);
OracleCallableStatement oraclecallablestatement = (OracleCallableStatement)oadbtransactionimpl.createCallableStatement(v, -1);
oraclecallablestatement.setString(1,getContCd());
oraclecallablestatement.setString(2,getConsolidateCd());
oraclecallablestatement.setString(3,getCustomer());
oraclecallablestatement.setString(4,getReqAsn());
Edited by: sreese on Sep 24, 2009 3:06 PM

HELP URGENT:; Splitting strings in servlets

hi ...
I am trying to access the below servlet from another servlet in iplanet . I have to access a file and arrange the '|' delimited data in the file in a table format like in html ...
I have used my own function inside the servlets which splits a string based on character ...But I always get
Internal error: exception thrown from the servlet service function (uri=/servlet/ReportsDataServlet): java.lang.NullPointerException, Stack: java.lang.NullPointerException
at ReportsDataServlet.split(ReportsDataServlet.java:82)
at ReportsDataServlet.doPost(ReportsDataServlet.java:56)
at ReportsDataServlet.doGet(ReportsDataServlet.java:14)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.iplanet.server.http.servlet.NSServletRunner.invokeServletService(NSServletRunner.java:919)
at com.iplanet.server.http.servlet.NSServletRunner.Service(NSServletRunner.java:483)
The sample code is shown below....I get the same error when i tries with stringokenizer as well....Pls help me fix this.....
public void doPost(HttpServletRequest request, HttpServletResponse response) throws IOException, Se
rvletException
response.setContentType("text/html");
PrintWriter out = response.getWriter();
cont=getServletContext();
out.println("<html><head><title>Reports Data</title></head><body bgcolor=DBD0E2>");
String repType = request.getParameter("Rep");
String mon = request.getParameter("month");
String day = request.getParameter("day");
String year = request.getParameter("year");
String repName = repType+"."+mon+"-"+day+"-"+year+".txt";
BufferedReader in = new BufferedReader( new FileReader("/home/lnayar/baais/xmlServlet/"+rep
Name));
String st;
st = in.readLine();
cont.log(st);
int c =0;
out.println("<table border=\"3\" cellpadding=\"0\" cellspacing=\"0\" width=\"800\"><tr><td>L
ATA</td><td>WC CLLI</td><td>WC NAME</td><td>ADSL_LOCATION</td><td>ATM FLAG</td><td>ATM RELIEF DATE</td><t
d>FRAME FLAG</td><td>FRAME RELIEF DATE</td><td>GOLD FLAG</td><td>GOLD RELIEF DATE</td><td>OVERLAY INDICAT
OR</td><td>COUNT</td></tr>");
while (st != null)
c++;
st = in.readLine();
StringTokenizer stt = new StringTokenizer(st);
out.println("<tr>");
while (stt.hasMoreTokens())
//out.println("<td>"+stt.nextToken("|")+"</td>");
out.println("<td>hello</td>");
out.println("</tr>");
while (st != null)
c++;
st = in.readLine();
out.println("<tr>");
Enumeration en = split(st,"|");
while(en.hasMoreElements())
out.println("<td>"+en.nextElement()+"</td>");
out.println("</tr>");
cont.log("out while");
out.println("</table>");
out.println("</body></html>");
public Enumeration split (String str, String delim)
Vector v = new Vector();
int pos_1;
int pos_2;
//Set initial delimiter positions...
pos_1 = 0;
pos_2 = 0;
//Start chopping off bits from the string
//until left boundary reaches the length of string
while ( pos_1 <= str.length() )
pos_2 = str.indexOf(delim, pos_1);
if ( pos_2 < 0 )
pos_2 = str.length();
String sub = str.substring (pos_1, pos_2);
pos_1 = pos_2 + 1;
v.addElement(sub);
return v.elements();
d deeply appreciate if soeone could take a look at the code and tell me exactly where i am going wrong ..... Its URGENT ...
Thx
klv

But there is the while statement which filters null
values..Which is useless in your case, because you proceed to change the value of st to something else which you don't check for null.
At any rate, what you have to do is this:
1. Look at the stack trace to find the line number where the error occurs.
2. Look at that line in your code.
3. Look at each object variable in that line. Find out how it became null and fix that.

Oranisational Management in HR

Hi Experts
I got problem with Oranisational Management Report . please can any one help me out.
I did taken conditions like this.
1 Unlinked Positions
select * from hrp1001 into corresponding fields of table itab where OTYPE = 'S'
and subty ne 'A003'
and sclas eq 'O'.
2 Unlinked Organastions units
select * from hrp1001 into corresponding fields of table itab where OTYPE = 'O'
and subty eq 'A002'
and sclas eq 'O' .
3 Objects with name changes
select * from hrp1001 into corresponding fields of table itab where OTYPE in ('S','P','O','K','C').
4 postions without jobs
select * from hrp1001 into corresponding fields of table itab where OTYPE = 'S'
and subty ne 'B007'
and sclas eq 'C'.
5 jobs without occ. categaries
select * from hrp1001 into corresponding fields of table itab where OTYPE = 'C'
and Infty ne '1633'.
this what i took the conditions . its not pulling the all the data how does it work please help me.

Hi Dilek
I got probelm with these buttons . I did what exactly u told me.
1.Jobs without Occ.categories
      SELECT OBJID OTYPE sclas FROM hrp1001 INTO CORRESPONDING FIELDS OF TABLE ITAB WHERE OTYPE = 'C'.
SELECT OBJID OTYPE sclas FROM hrp1001 INTO CORRESPONDING FIELDS OF TABLE ITAB1 WHERE OTYPE = 'C'
                                                                      AND Infty eq '1633'.
LOOP AT ITAB.
   LOOP AT ITAB1 where OBJID EQ ITAB-OBJID.
     DELETE ITAB.
     ENDLOOP.
ENDLOOP.
sort ITAB by objid .
Delete adjacent duplicates from ITAB COMPARING OTYPE objid .
LOOP at itab .
    select single * from hrp1000 where OTYPE = ITAB-OTYPE
                                   AND objid = ITAB-objid
                                   and stext <> ' '
    IF sy-subrc = 0.
      itab-stext = hrp1000-stext.
    Endif.
    Modify itab.
Endloop.
Its pulling the data but not correct Data.
2.Delimited Position Holder
SELECT OBJID OTYPE sclas FROM hrp1001 INTO CORRESPONDING FIELDS OF TABLE ITAB WHERE OTYPE = 'S'.
SELECT OBJID OTYPE sclas FROM hrp1001 INTO CORRESPONDING FIELDS OF TABLE ITAB1 WHERE OTYPE = 'S'
                                                             AND SUBTY EQ 'A008'.
LOOP AT ITAB.
   LOOP AT ITAB1 where OBJID EQ ITAB-OBJID.
     DELETE ITAB.
     ENDLOOP.
ENDLOOP.
sort ITAB by objid .
Delete adjacent duplicates from ITAB COMPARING OTYPE objid .
LOOP at itab .
    select single * from hrp1000 where OTYPE = ITAB-OTYPE
                                   AND objid = ITAB-objid
                                   and stext <> ' '
    IF sy-subrc = 0.
      itab-stext = hrp1000-stext.
    Endif.
    Modify itab.
Endloop.
its pulling the data but when the ending date is less than 31.12.9999 not pulling (It has to be ending date 31.12.9999)
3.Open positions not falged as vacant (condition must be S NE P NE 1007)
4 vacant filled positions . (Condition must be S EQ P EQ 1007)
(How can i take the conditions )
Please Help me .

HCM Foms : OM Process & Forms

Hello All,
I am working on Reactivate Position where i need to reactive the delimited position.
Sap Webdynpro Application ( Open Organizational Process ) does not shows the delimited position.
When i search the object by type position, its not showing the delimited position. Is there any way
i can get the delimited position ?
Please let me know.
Thanks
VJ

Hi Mukesh,
I can not do that directly. For that purpose only i am developing the new form called "Reactivate". The purpose of this form is to extend the validity for the delimited position
Thanks

Export-CSV as a different user

Wrote a sript to audit a few reg keys and other vitals from the computer. Eventually I will have this go to a database but in the meantime I am trying to write it to a text file. These are mobile computers that log in as a generic local user.
The powershell script as is needs to write to a domain file and therefore doesnt have permissions. Can someone help me use different creds within the powershell script to use for access?
The Export-CSV function is in use for the append switch as these are powershell v2
#Get Local User SID for use as primary key
$CS = Gwmi Win32_ComputerSystem -Comp "."
$CS.UserName
$objUser = New-Object System.Security.Principal.NTAccount($CS.UserName)
$strSID = $objUser.Translate([System.Security.Principal.SecurityIdentifier])
#$strSID.value
#Get Versions
$SoftwareVersionKey = 'HKLM:\SOFTWARE\Wow6432Node\Software1\Portal'
$SoftwarePackageVersion = (Get-ItemProperty -path $Software1VersionKey).VERSION1
$Software1Version = (Get-ItemProperty -path $Software1VersionKey).Version1
#$Software1PackageVersion
#$Software1Version
#Get Software1 GUID
$Software1Key = 'HKLM:\SOFTWARE\Wow6432Node\Software1'
$Software1GUID = (Get-ItemProperty -path $Software1Key).GUID
#$Software1GUID
#Get Software1 Datasync Identity
$Software1DSIdentKey = 'HKLM:\SOFTWARE\Wow6432Node\Software1\SyncAgent'
$Software1Identity = (Get-ItemProperty -path $Software1DSIdentKey).Identity
#$Software1Identity
#Get Computer Information / Computer Name / Installed Memory (MB)
$WMI = Get-WmiObject -Class Win32_ComputerSystem
$computername = ($WMI.name)
$computerDomain = ($WMI.Domain)
$computerManufacturer = ($WMI.Manufacturer)
$computerModel = ($WMI.Model)
$InstalledMemory = ($WMI.TotalPhysicalMemory/1mb)
#Get Computer Information / Computer Name / Installed Memory (MB)
$WMIBIOS = Get-WmiObject -Class Win32_BIOS
$BIOSVersion1 = ($WMIBIOS.SMBIOSBIOSVersion)
$BIOSVersion2 = ($WMIBIOS.Version)
$computerSerial = ($WMIBIOS.SerialNumber)
#Date
$date = Get-Date -format "yyyyMMdd"
function Export-CSV {
[CmdletBinding(DefaultParameterSetName='Delimiter',
SupportsShouldProcess=$true, ConfirmImpact='Medium')]
param(
[Parameter(Mandatory=$true, ValueFromPipeline=$true,
ValueFromPipelineByPropertyName=$true)]
[System.Management.Automation.PSObject]
${InputObject},
[Parameter(Mandatory=$true, Position=0)]
[Alias('PSPath')]
[System.String]
${Path},
[Switch]
${Append},
[Switch]
${Force},
[Switch]
${NoClobber},
[ValidateSet('Unicode','UTF7','UTF8','ASCII','UTF32',
'BigEndianUnicode','Default','OEM')]
[System.String]
${Encoding},
[Parameter(ParameterSetName='Delimiter', Position=1)]
[ValidateNotNull()]
[System.Char]
${Delimiter},
[Parameter(ParameterSetName='UseCulture')]
[Switch]
${UseCulture},
[Alias('NTI')]
[Switch]
${NoTypeInformation})
begin
$AppendMode = $false
try {
$outBuffer = $null
if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer))
$PSBoundParameters['OutBuffer'] = 1
$wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand('Export-Csv',
[System.Management.Automation.CommandTypes]::Cmdlet)
$scriptCmdPipeline = ''
if ($Append) {
$PSBoundParameters.Remove('Append') | Out-Null
if ($Path) {
if (Test-Path $Path) {
$AppendMode = $true
if ($Encoding.Length -eq 0) {
$Encoding = 'ASCII'
$scriptCmdPipeline += 'ConvertTo-Csv -NoTypeInformation '
if ( $UseCulture ) {
$scriptCmdPipeline += ' -UseCulture '
if ( $Delimiter ) {
$scriptCmdPipeline += " -Delimiter '$Delimiter' "
$scriptCmdPipeline += ' | Foreach-Object {$start=$true}'
$scriptCmdPipeline += '{if ($start) {$start=$false} else {$_}} '
$scriptCmdPipeline += " | Out-File -FilePath '$Path'"
$scriptCmdPipeline += " -Encoding '$Encoding' -Append "
if ($Force) {
$scriptCmdPipeline += ' -Force'
if ($NoClobber) {
$scriptCmdPipeline += ' -NoClobber'
$scriptCmd = {& $wrappedCmd @PSBoundParameters }
if ( $AppendMode ) {
$scriptCmd = $ExecutionContext.InvokeCommand.NewScriptBlock(
$scriptCmdPipeline
} else {
$scriptCmd = $ExecutionContext.InvokeCommand.NewScriptBlock(
[string]$scriptCmd
$steppablePipeline = $scriptCmd.GetSteppablePipeline(
$myInvocation.CommandOrigin)
$steppablePipeline.Begin($PSCmdlet)
} catch {
throw
process
try {
$steppablePipeline.Process($_)
} catch {
throw
end
try {
$steppablePipeline.End()
} catch {
throw
New-Object -TypeName PSCustomObject -Property @{
UserSID = $strSID.value
ComputerName = $computername
Domain = $computerDomain
ComputerManufactor = $computerManufacturer
ComputerModel = $computerModel
ComputerSerial = $computerSerial
InstallMemory = $InstalledMemory
BIOS1 = $BIOSVersion1
BIOS2 = $BIOSVersion2
Software1PackageVersion = $Software1PackageVersion
Software1Version = $Software1Version
Software1GUID = $Software1GUID
Software1Identity = $Software1Identity
Date = $date
} | Export-Csv -Path '\\server\drive\IT Shared\Audittest.csv' -NoTypeInformation -Append

To shorten this code up a little... really here is the last part that I am trying to do. Just want to send variable data to text file but cant due to logged in user.
New-Object -TypeName PSCustomObject -Property @{
UserSID = $strSID.value
ComputerName = $computername
Domain = $computerDomain
ComputerManufactor = $computerManufacturer
ComputerModel = $computerModel
ComputerSerial = $computerSerial
InstallMemory = $InstalledMemory
BIOS1 = $BIOSVersion1
BIOS2 = $BIOSVersion2
Software1PackageVersion = $Software1PackageVersion
Software1Version = $Software1Version
Software1GUID = $Software1GUID
Software1Identity = $Software1Identity
Date = $date
} | Export-Csv -Path '\\server\drive\IT Shared\Audittest.csv' -NoTypeInformation -Append

Combing output from different cmdlet to single worksheet

I am having 2 one liner and 2 script which provide me the required output. I am looking to export them to a single worksheet one below one
All 4 script produces output with different number of row and columns. Is it possible to combine arrays with different layouts (columns) to a single Export-Csv or XLS?

Hi Aravind,
Sorry for the delay.
To append all the output to one .csv file, please try this function, which add the "-append" switch to the cmdlet "Export-CSV":
function Export-CSV {
[CmdletBinding(DefaultParameterSetName='Delimiter',
SupportsShouldProcess=$true, ConfirmImpact='Medium')]
param(
[Parameter(Mandatory=$true, ValueFromPipeline=$true,
ValueFromPipelineByPropertyName=$true)]
[System.Management.Automation.PSObject] ${InputObject},
[Parameter(Mandatory=$true, Position=0)]
[Alias('PSPath')]
[System.String] ${Path},
#region -Append (added by Dmitry Sotnikov)
[Switch] ${Append},
#endregion
[Switch] ${Force},
[Switch] ${NoClobber},
[ValidateSet('Unicode','UTF7','UTF8','ASCII','UTF32','BigEndianUnicode','Default','OEM')]
[System.String] ${Encoding},
[Parameter(ParameterSetName='Delimiter', Position=1)]
[ValidateNotNull()]
[System.Char] ${Delimiter},
[Parameter(ParameterSetName='UseCulture')]
[Switch] ${UseCulture},
[Alias('NTI')]
[Switch] ${NoTypeInformation})
begin
# This variable will tell us whether we actually need to append
# to existing file
$AppendMode = $false
try {
$outBuffer = $null
if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer))
$PSBoundParameters['OutBuffer'] = 1
$wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand('Export-Csv',
[System.Management.Automation.CommandTypes]::Cmdlet)
#String variable to become the target command line
$scriptCmdPipeline = ''
# Add new parameter handling
#region Dmitry: Process and remove the Append parameter if it is present
if ($Append) {
$PSBoundParameters.Remove('Append') | Out-Null
if ($Path) {
if (Test-Path $Path) {
# Need to construct new command line
$AppendMode = $true
if ($Encoding.Length -eq 0) {
# ASCII is default encoding for Export-CSV
$Encoding = 'ASCII'
# For Append we use ConvertTo-CSV instead of Export
$scriptCmdPipeline += 'ConvertTo-Csv -NoTypeInformation '
# Inherit other CSV convertion parameters
if ( $UseCulture ) {
$scriptCmdPipeline += ' -UseCulture '
if ( $Delimiter ) {
$scriptCmdPipeline += " -Delimiter '$Delimiter' "
# Skip the first line (the one with the property names)
$scriptCmdPipeline += ' | Foreach-Object {$start=$true}'
$scriptCmdPipeline += '{if ($start) {$start=$false} else {$_}} '
# Add file output
$scriptCmdPipeline += " | Out-File -FilePath '$Path' -Encoding '$Encoding' -Append "
if ($Force) {
$scriptCmdPipeline += ' -Force'
if ($NoClobber) {
$scriptCmdPipeline += ' -NoClobber'
$scriptCmd = {& $wrappedCmd @PSBoundParameters }
if ( $AppendMode ) {
# redefine command line
$scriptCmd = $ExecutionContext.InvokeCommand.NewScriptBlock(
$scriptCmdPipeline
} else {
# execute Export-CSV as we got it because
# either -Append is missing or file does not exist
$scriptCmd = $ExecutionContext.InvokeCommand.NewScriptBlock(
[string]$scriptCmd
# standard pipeline initialization
$steppablePipeline = $scriptCmd.GetSteppablePipeline($myInvocation.CommandOrigin)
$steppablePipeline.Begin($PSCmdlet)
} catch {
throw
process
try {
$steppablePipeline.Process($_)
} catch {
throw
end
try {
$steppablePipeline.End()
} catch {
throw
<#
.ForwardHelpTargetName Export-Csv
.ForwardHelpCategory Cmdlet
#>
Reference from:
Export-CSV -Append
I hope this helps.

Position to Requisition relationship not delimiting

Hi Experts,
In SAP E Recruitment, when ever a requisition is closed from Front end by recruiter then in OM position to NB relationship is not delimited.
Is this a standard behavior of SAP E Recruitment.
Regards
Puneet

Hi Puneet,
E-Recruiting doesn't delimit the position on HR side automatically.
Regards,
Nicole

Delimiting Positions

Similar Messages

Maybe you are looking for