Deliquency Notification type Change
Hi Experts,
Is there any possibility to change the notification type (NOT) DL to some other characters say DD ? if so can you please explain where to change.
Thank you..
hi
it is basically used in simplified notification processing which is used very occassionly with minium inputs
for details please refer the following link
http://help.sap.com/saphelp_47x200/helpdata/en/32/293d381f138268e10000009b38f8cf/frameset.htm
regards
thyagarajan
Similar Messages
-
Notification type -change -reg
Hi,
Can the notification types in the already created notifications changed ?
example : one notification is created with notification type M1 instead of M2
Can it be changed
Normally it will not be i think , in ECC6.0 any of thsi functionality available ?
regards
madhu kiranHi,
You can only change notification type of a general notification, that is a notification of category 05 (this rules out changing M1 to M2). The customizing must allow notification change - see customizing under 'Overview of Notification Type'. The notification must still have status outstanding for the change to be allowed.
The exit QQMA0029 is provided to allow some further control during the notification change procedure, it does not assist in making the feature available.
-Paul -
Regarding - Notification Type Change
Hi,
I want to change my notification type G0 to M1, M1 to G0, M2 to G0 etc.....In SPRO Setting i had made the changes Allowed changes to notification type,
When i created & saved the Notification, in change mode how to change the notification type, if i want to change it, its their any other settings in spro i hav to do ?
Regards
Prakash.BHi
As far as my experience in this respect is concerned, while remaining with the standard functionality, configure the Notification Types (In Category 05 General Notification) for all the Notification Types you want to change to some other Notification Type. Then configure the Allowed Change of Notification Type. Create Notifications via IQS1 and thereby change the Notification Type via IQS22.
Hope this would help you out.
Regards
Hunain -
Dear Experts,
Can we change the Notification Type after the Notification has been created. Any method ??
Regards
DMhi
it is basically used in simplified notification processing which is used very occassionly with minium inputs
for details please refer the following link
http://help.sap.com/saphelp_47x200/helpdata/en/32/293d381f138268e10000009b38f8cf/frameset.htm
regards
thyagarajan -
EAM Portal, Change Notification type in the "Create Notification Request "
Hi all,
I can't change the "Notification Type" in the "Create Notification Request" screen, in EAM Porta. We are going to implement "Maintenance technician Role" in the EAM Portal.
Any information would be appreciated.
Thanks,
Alexhi young
kindly check in customizing funtions whether the field selections for notification it has been marked as display,
also kindly inform about the detailed process you are doing(T code) while facing the said problem
regards
thyagarajan -
ATTACHING WEB URL'S AS NOTIFICATIONS IN CHANGE SPECIAL INFORMATION TYPES.
Hi,
I want to add URLas notification in Change Special Information Types process in HRSSA workflow.How to proceed?The URL should appear in employee review page V4.0
-
Hi All,
We want to change the Notification type - YWQN type to YCQN type in Quality Notification- 1111111. Is it possible or do we need to reject this QN and create another new qn of YCQN type. Can u please advise?
ThanksI am not very sure but In the customization of notification if you have maintained setting to change YWQN type to YCQN then you can change.
-
QM_move stock to block stock through Q2 notification type
Dear QM Experts,
u2022 I am creating quality notification type Q2 through QM01
u2022 After doing necessary defect entry I want to post the defective material to block stock.
u2022 For this I am using action box transfer posting unrestricted to block.
u2022 By doing this material can be transferred to block stock of the same storage location
Requirements,
u2022 Is it possible to move the material to block stock of another storage location?
u2022 Whether 311 movement can happen through this action box so as to transfer the material from unrestricted to unrestricted of another storage location?
u2022 What type of setting needs to be done to achieve this effect?
Thanks
Anand RaoHello
u2022 Is it possible to move the material to block stock of another storage location?
In notification action box you have the option of transferring the material from unrestricted to block. In that you have the option inputting the storage location to which you want to transfer
u2022 Whether 311 movement can happen through this action box so as to transfer the material from unrestricted to unrestricted of another storage location?
- As said this can be done through a development or other option is that you can choose the same action box( Transfer unrestricted to block ) and change the movement type to 311. It will allow to move material from one storage location to another
another solution is that you can use tak with followupaction as Goods movements. its available in the standard. when u save the notification it will take you to transfer posting but wherein you will have to key in all the details
u2022 What type of setting needs to be done to achieve this effect?
Its available in the action setting in the configuration of notification. you will surely require ABAP help -
Digital Signature for QM notification status change
Hello experts,
I need your guidance regarding implementation of user digital signature for QM notification status change. Our customer has ECC 6.0 but they are not inclined to introduce enhancement package 3 soon. Now their requirement is that while QM notification status change they want to have a user signature pop-up to verify the user authorization to do so. But they don't want to do so by using digital signature via DMS status change.
I am really not sure if I have explained the situaion correctly or not as i am quite new to QM. But I am desparately looking forward to get your valued replies in this regard.
Best regards,
AnirbanTo fulfill the FDA requirement we have apply the logic to make sure that a digital signature is captured for status changes during task processing.
To map this requirement we have developed one custom table to store remark that will be displayed on digital signature remarks textbox. This table will have following feild:
STAT - System/ user status
QMART - QN type
SPARS - language
TEXT - character text.
Work with ABAPer to implement this, and after implementing validate following key point:
u2022 Validate that after successful digital signature that the signature cannot be overwritten.
u2022 Validate the locking of the User ID after customer specific number of unsuccessful signature attempts.
u2022 Verify that the digital signature works for each status.
u2022 Validate that if the digital signature is cancelled prior to successful entry that the system status reverts back to previous status and all processing authorizations allowed for that status still function properly.
Hope my reply will help you.
Thanks!!! -
Controlling same Notification Types against few Planner groups
Dear Experts,
We have four groups of Maintenance Team (Mec, Ele, Inst & Civ) which are controlled against four roles to create same Notification types. The control factor is planner group which are linked against their required role and it is working fine to create notification (IW21) for their specific group.
The problem which we are facing is, change mode of Notification, Mech planner group team can change the details of Notification in Elec group as
same Notification types are used by 4 groups. Is there any way to restrict for the change authorization (IW22) in Notification as four teams are following four differernt roles.
Regards,
SahuAjaya,
Check the values in Authorization Object I_QMEL. (PFCG tcode of the respective Role) See the picture below. Assume this is your role for Civil Notification type (CE). It should look like this.
Also, try by removing the values in TCD field in other authObjects of this Role.
One more possibility is
Some Role other than this specific Role is enabling the user for IW22. This role might have been assigned to all these 3 users. You need to trace this and remove or modify the role.
This problem is a typical one often seen to be associated with AuthObjects, This can be managed by investigation.
A last resort method can be to manage this through user-exit QQMA0014. This is possible.
KJogeswaraRao -
User Exits for IW21 - Notification Type
Hi ,
I need to access User Exit related to IW21 , IW22 Transactions.
I require the user exit to customize process for a specific Notification type 'KS'.
User exit when a notificatrion Type is created & when it is modified.User Exits and Badi's For IW21 & IW22
BADI's
IQS0_STATUS_MAINTAIN Control of Changeability of User Status
IWO1_SUBSCREEN_0170 Display Additional Data on Object Screen 0170 PhysicalSample
IWOC_LIST_TUNING Performance Tuning for Lists in PM/CS
IWOC_OBJECTINFO_CHNG Changes to Data of Object Info Screen
NOTIF_AUTHORITY_01 Additional Authorization Checks for the Notification
WOC_FL_DETERMINE Determine Date for Determining Installation Loc. Equi.
USER EXITS
IWO10026 User check on setting status 'Do not perform'
IWO10027 User exit: Generate user-defined settlement rule
IWOC0001 Create PM/SM notification: Determine reference object
IWOC0002 PM/SM notification: Check whether status change is allowed
IWOC0003 PM/SM authorization check of ref. object and planner group
IWOC0004 Change single-level list editing PM/QM/SM ALV settings -
Screen Structure for Extended View" in "Overview of Notification Type"
Dear Members,
When I am using the function "Screen Structure for Extended View" in "Overview of Notification Type" in SPRO, I am not able to make any changes to "Tab Page Allocation" and areas under "Screen Area" What should i do to overcome this.
Thanks & RegardsHi,
The "Tab Page Allocation" setting determines how many sub-screens can be added to the tab. It is therefore not possible to change this field for some tabs which are designed to be single screen only. Example - 10\TAB10 (items), 10\TAB11 (tasks).
Should be changeable on tabs that allow multiple subscreens. Exampel - 10\TAB02 (Additional data).
-Paul -
Default PM Notification type to PM Order type
HI All,
Please any one let me know where I need to make setting to obtain the default Notification type from PM Order creation or change mode.
I have done some analysis i.e. I am able to obtain the default Order type for Notification i.e. when I click on create Order button in Notification creation or change mode (IW21 / 22). The pop-up window appears with default PM order type. To obtain the default value , we need make settings in SPRO i.e. Maintenance and Service Processing > Maintenance and Service Notifications > Notification Creation > Notification Types > Assign Notification Types to Order Types.
I required vice verse i.e. Default Notification type from PM Order creation or change mode. To obtain this I have checked any SPRO settings to make. Example: Maintenance and Service Processing > Maintenance and Service Orders > Functions and Settings for Order Types > Define Notification and Order Integration. But here the notification is immediately created, when we save the PM order. This is happening since the automatic creation check box (3 rd column) is checked in SPRO settings i.e. Define Notification and Order Integration.
I need the system to display the pop-window with default notification type, when I clicked on create Notification button in PM order create or change mode (Iw31/32). Please let me know where I need to make settings for this?
Regards
RamuHi Ramu,
Goto SPRO ->Maintenance and service processing ->Maintenance and service orders ->Functions and settings for order type ->Define notification and order integration.
Goto specific order type remove the check box in the third column.
Result:When ever you create the service order, notification is not created automatically.You have to goto IW32 goto create notification click on the icon then pop-up appears for the notification.Hope this solution resolve your problem.
Regards
Suman Kumar -
Setting notification type for PCR
Hi ALL,
Here is what I am tryign to do. I opened a Change request form:
Change Employee Group and Subgroup
It loaded fine and I am able to review it. But when I try to submit the form. It gives me this error.
Notification type 57 not defined
and for other form it gives Notification type 56 not defined.
Do we need to set these notification anywhere? In case can any one help me with that procedure?
THanks for your help..Hi James,
Goto tcode - SPRO -> Cross Application Components -> Internet/Intranet Servies -> Scenario Definition - > Prepare General Notification - > Notification Creation -> Define Notification Type...Here you can create a notification as you want.Do let me know still if you have any problem. -
Dear Experts,
I am a QM Consultant.
How to create or include a new notification type? Can anybody brief it?
Regs,
RPVhi
goto
SPRO>Quality Management>Quality Notifications->Notification Creation-->Define Notification Types
here select any existing QM notification tyrp and click on copy as button (F6)
now change the name and descrioption and save
ashok
Maybe you are looking for
-
XML and Images stored in Oracle 8i
I have been able to store images within an acle 8i database using both LONG RAW and OrORDSYS.ORDIMGB datatypes. I can use Forms and Reports to access these datatypes but now wish to include them in WEB products such as XSQL or PL/SQL. Using XSQL I on
-
Unknown error (-48) - Any ideas?
Hi, I'm trying to update my ipod and am getting the message "Your ipod could not be updated because of unknown error (-48)". It then goes on to update ok. I just wondered the best place to try to find out what this myhical error is. It's a 5g 30Gb wi
-
Trying to install the new itunes update and it keeps saying error could not install itunes. Currently I am running windows 7. Any advise to fix this problem. This is doing this when installing itunes/quicktime, safari 5, mobileme control panel, and t
-
Why do all of my iPhoto photo stream photos no appear on my iPhone photo stream?
I have a MAC that I use to store my images on in iphoto. I have manually put several photos (jpg) into iCloud in iPhoto in order to access them from my iphone but some of them will not appear on my photo stream on my iphone. I have an iphone 5 wit
-
2.1 RC1 - Pure performance when Preferences.Worksheet."script path" is used
When I fill out the "Select default path to look for scripts" text box on the Worksheet page in Preferences, I expirience very bad performance when I type in sql statements. If I clear the text box agian, I have normal performance.