Delition of enteries updated in j1I5

Dear All,
There was an error that RG1 is not updating with the movement type 641 and material xxxxxxxxx
We found this material used for internal consumption 261 movement type. my mistake we updated all documents those
which are pending for J1I5 with the classification RMA.
Know client is asking us to remove the enterise updated in RG1 through J1I5 because report is not tallying
Could you please suggest to reomve the all enteries i have made for the particular material for RG1 through J1I5
with the classification RMA.
Best regards,
Ramesh

hi,
From what i understand:-
1) You have updated the RG1 register for movement type 101, irrespective of the material type, i.e wether it si a finished goods or raw materials.
2) You have consumed the raw materials against production order with movement type 261.
In that case :-
1) You need to reverse the GRN. for the materials you do not want to update in RG1 register.
2) You need to assign the movement type 102 to RG1(in the path i have mentioned earlier) register to reverse the entries in J1I5.
3) I assume that you have assigned movment type 101 to RG23A register, please take care when you maintain the materials in J1ID.
4) I also assume you have assigned movement type 261 to RG1 and RG23A register in customizing.
Please contact your MM and PP consultant they will be in a position to help you, as this is a cross functional issue.
Text Removed
Edited by: Lakshmipathi on Apr 27, 2011 4:17 PM
Please dont ask for p(o)ints. It has to be given voluntarily
Edited by: aadesh123 on Apr 27, 2011 1:05 PM

Similar Messages

J1I5 (excise RG1 update)

Hi experts,
I am trying to update RG1 (J1I5) with the following selections:
Company, Plant, Excise Group
Posting date
Material, Batch
Classification as RMA
Document posting date
RG1 (registers)
After execute, message appears " List contains no data"
Where Materials stock is there for the batch.
If I keep the batch field blank, then the list appears on execution but batch against which stock is available does not appear in the list.
PL help
thanks !

Moving this thread from ERP MM to ERP Sales and distribution forum.

Urgent please: Master-Deatils OAF Page for enter and Update data

Hi all,
i need your help to build master-details oaf page for Enter / Update data
for example: We have Locations , Department , Employees tables
all these tables on one oaf page (OAAdvancedTable)
when user enter New Location and go to Enter it's Departments and for each department, he can Enter they employees.
and Regarding to Update date:
- when user select Location , Department table fetch all departments and user can update
waiting your support for urgent please
Regards
Hany

i do these Steps :
1- Create LocationEO,DepartmentEO and EmployeesEO
2- Create Association between LocationEO and DepartmentEO with one-to-Many relation (LocToDeptAO)
3- Create Association between DepartmentEO and EmployeesEO with one-to-Many relation (DeptToEmpAO)
4- Create View Object (LocationVO)
5- Create DepartmentVO (and add LocationEO due to LocToDeptAO)
6- Create EmployeesVO (and add DepartmentEO due to DeptToEmpAO)
7- Creare View Link between LocationVO and DepartmentVO (Based On LocToDeptAO) --> LocToDeptVL
8- Creare View Link between DepartmentVO and EmployeesVO (Based On DeptToEmpAO)---> DeptToEmpVL
9- Add LocaionVO to Application Module, then add DepartmentVO Via (LocToDeptVL)
10-Add EmployeesVO to Application Module Via (DeptToEmpVL)
and Then Run Test AM, all data fetch sucessfully, and i can insert data with proper relations
NOw, i want to implement this Business Logic in single oaf Page using 3 OAAdvancedTable (Master - Details -Details )
Regards

Excise invoice-register updation

HI,
after creating excise invoice in J1IIN
1. WHAT ALL REGISTERS MUST GET UPDATED
2. HOW TO CHECK THIS
3. WHERE SETTING IS DONE FOR THIS UPDATION OF REGISTERS
PL suggest

after J1IIN,
Update RG1- J1I5 ( classification - IDH- for regular sales) eg:enter the rel classification such as - IDE/IWE etc..,
Extract RG1- J2I5
Print RG1 - J2i6
( before maintian the config for RG1-output types)
for more info- Search forum -

Error in Update of Register

Dear All,
Can anybody guide me or give me some overview,
1) when i am going to J1i5 transaction, to see the RG1 and RG23 Part 1details, i am not getting any thing under the screen.
i did so many G/R with Excise and in register RG23A Part-1 and Part -2 getting Update.
2) When i am capturing Excise invoice without reference to P.O in J1IEX, that time " Available Credit quantity 1.000,000 is different from the defaulted 0,000" this Warning message is coming, but when i am trying to Simulate "NO CENVAT AMOUNT TO BE POSTED" and "NO CENVAT AMOUNT TO BE REVERSED" message is coming.
Can anybody tell me why exactly this message is coming in J1IEX or how can i upload CENVAT amount.
Thank you,

Hi,
1) when i am going to J1i5 transaction, to see the RG1 and RG23 Part 1details, i am not getting any thing under the screen.
i did so many G/R with Excise and in register RG23A Part-1 and Part -2 getting Update.
-- J1I5 transaction is used for manual updation of Part 1 Registers. As you are updating Part I & II during GR (MIGO) , you wont get this transactions in J1I5.If you select the option capture Excise invoice in MIGO , this will lead to only capturing of excise invoice & you will have to update the Part I register through J1I5 & post the part II entries through J1IEX.
2) When i am capturing Excise invoice without reference to P.O in J1IEX, that time " Available Credit quantity 1.000,000 is different from the defaulted 0,000" this Warning message is coming, but when i am trying to Simulate "NO CENVAT AMOUNT TO BE POSTED" and "NO CENVAT AMOUNT TO BE REVERSED" message is coming.
Can anybody tell me why exactly this message is coming in J1IEX or how can i upload CENVAT amount.
For capturing Excise invoice without reference to PO , you will have to enter the values for BED , ECS & SECS manually in the "Duty Values" tab at the item level.Once you have maintained this try simulating and post the document.
I hope this is clear to you.

When J_2IRG1BAL table needs to be updated.

Dear All,
We have created a new material (Finished goods). But not sure, when we need to update the table J_2IRG1BAL.
Please tell me which option I have given is correct.
1. Immediately after the material creation
2. After the goods receipt (i.e. Goods receipt updation in J1I5 with RMA classification)
3. After running a business cycle (Sales order to Invoice)
Kindly update me on this.
Also let me know the process for other materials (Semifinished, Capital, Raw materials)
Regards,
Mullairaja

Hi
Its always better to create the entry in J_2IRG1BAL after creation of the material.
You have to enter the below details like
MATNR
FORM packed or loose
WERKS
check this note which will be useful
Note 951955 - CIN General clarifications for RG1 goods
regards
SAP SD

Excise values are not updating in factory sales

Dear SCN's,
I'm facing an issue while doing factory sales, while creating sales order and billing I'm using J1IIN for excise invoice and then updating in J1I5 transaction but the values are not updating in table J_2IRG1BAL. Can anyone suggest what to do in order to get the values updated in table.
Thanks & Regards,
Kumar

The following note explains how you need to update J_2IRG1BAL table.
Note 951955 - CIN: General clarifications for RG1 goods
Have a look at this.
G. Lakshmipathi

Update of Registers based on Material Group

HI Gurus
       There are Material groups say A,B,C etc.
They require A-A1,A2,A3(Subgroups)
                   B-B1,B2(Subgroups)
                   C-C1,C2(Subgroups)
Now Requiremnt is registers should be updated /extracted (J1I5(Update of registers RG1 and RG23 Part-1) based on Material subgroups
Can this requirment be fulfilled
Thanks in advance
Edited by: sameer basha on Jan 12, 2009 12:06 PM

hello sunny,
i tried to reproduce the behaviour on my machine, but i got not the same result.
could you provide the steps i need to take to reproduce it as it is on your machine?
thanks,
regards,
robert h
national instruments

Excise register balance update

Sir,
Our client uses FI JV for excise duty utilization instead of standard transaction J2IUN. As a result the balance in Ex registers RG23A/C part 2 is showing excess amount than actual. Part 1 register is updated through J1I5. How to correct balance in part 2 register.
Thanks in anticipation.

HI,
Inorder to correct the Excise Register balance you have to pass a Excise JV using transaction J1IH other adjustments..
Regards,

RG1 Register Updation Problem-

Hello,
we are having two plants, both are manufaturing plants. having same excise group and Excise registration number. Actualyy both the plants are situated at same place. M001 is linked to M001 company code and M002 plant linked to M002 Company code.
M001 plant Receive the Finished good from Shop floor via Production oder and Rg1 register updated through J1I5 t code.
Now Business wants to do Stock transfer for moving of FG material to M002 plants for sale from M001 plant. Every material will sales from M002 plant. Business is making STO from M001 to M002 Without excise .
How to Update RG1 Register in M002 plant. Received entries updated in M001 company code RG1 Register and but sale from M002 plant how to update Rg1 register.
Regards
Mahesh

Hello
301 movement type is assigned to RG1 register and
Material and Chapter ID and material Type "RG1" mainatined in J1ID....
We have transffered the material from M001 company code to 9001 through MB1B with movement type 301.
system is not showing any documents here for updation of RG1 register through J1I5.. here clssification selected is "RMA" receipt from Manufature"
Mahesh

PartII Registers are not updated for J1IS

Hi All,
Please help me to know, why there is no update for part II registers for Invoice for MRDY type , which was done through J1IS.Please help to configure these things
Example:
Returns PO Created ME21N
Goods posted :MIGO with Movt 161
Part I updated with J1I5
Invoice created with J1IS
Registers updated with J2I5 and then J2I6.
While doing J2I5 for part II, it is not updating the Part II register(I mean ,this transaction is not showing in J2I6)
If I do the other adjustments in transaction J1IH, we can able to update PartII registers (J2I5 then J2I6).
Please help in this regards.
Thanks and Regards
Jonnakuti Raju

Hi,
RG23A Part II register will have entries of Credit or Debit of Excise Duties, Excise Invoice created is not a part of RG23 Register. Through J1IS only Excise Invoice is created, effect of debiting the excise duties to this respective excise invouce will happen only when you will do J2IUN for debitting the excise duty. Moreover you can see the list in J2IUN - Pending Invoice or in J1I7 , use ETT type OTHR.
Regards,
Vikas

Incorrect Opening stock & closing stock updation in RG1 Register

Hi ,
It's regarding Rg1 register update. As our cut-over date was 31.08.2010.
After extracting for the month of sept. , when no opening and closing stock
reflecting in it, than we realize it .Afterwards we maintain
the closing balance for 31.08.2010 in the table and try to
re-extract it,but there is no change in the sept.figure.After extracing for
October month,we get the values in the column ofopening stock and
closing stock in RG1 register. But for some material it is showing
negative stock and for some as Zero, though physically it is present.
What i found in Rgsum table that the stock quantity are not correct,
it seems that september stocks are not updated in the table also in
J_2irg1bal table ,only october stock are reflecting.
looking forward for your valuable inputs.

Hi,
All the Receipts And issues have been updated in J1I5 for september month.What i also found that in table for
RG23 summary of receipt and issue , the quantities has been updated for the particular month also in RG1
Excise details table all the entry are there for september month.The only problem is on Opening and Closing
balance table for Rg1. here in this , there is no entry for September month,but for october it is there.
How to correct this.
Regards
sujeet

J1i5 error.

Hi Friends,
I tried to update the material documnet in J1I5 t-code,its giving red indicator error.May i know what is the error.
i maintained the material in j1id and also in j-2irg1bal.stock also available fo rhte material but its throwing the error in j1i5 t-code.
can any one help me to resolve this.
What will be the solution for red indiactor errors in J1i5.
Thanks in advance.
Ravi,M

Hi,
Thanks for your help.
I got the solution for this issue. J-1irgsum table should have some balnce. Reciepts should be greater than issue quantity than only system will allow you to update in J1i5 t-code,otherwise it give you red indicator.
Thanks,
Ravi.M

How to Validate Schedule Ship Date manually entered - Order Management

Hi,
When a sales order is booked for a customer, some sales staff maually enter the Scheduled Ship Date field under Shipping tab, insead of using the calendar. And if they enter a date that is not within a valid date range, the system accepts it. How do I make the application throw an error asking them to re-enter the date.
Thanks,
Anitha

Hi,
You can explore using the latest acceptable date field on the order lines for this validation. This field can be defaulted fromn the custmer master set up. For example, if the latest acceptable date for customer A is 10 days, and the request date for the customer on an order line is 1st Aug 2007, then the latest acceptable date on the order line will be calculated as 10th Aug 2007. If the user enters/updates the scheduled ship date later than 10th Aug 2007, then system will throw an error.
Hope this helps.
Regards
Saraja

RG1 Registers Not Updating

Dear All,
We have done the entry in J1IN, and also done the update in J1I5, Using classification RMA & also done the Extract J2I5. But Still it is not getting updated in the Registers.
Kindly guide me . What are the classification to be done for Updating Register...Please Kind Me.
Regards,
R.Ramakrishnaraj,

Dear Friend,
Make sure that the movement types for the material documents (say 101,131,601,641 etc) are updated in the below mentioned node
Spro > Logistics general > Tax on Goods Movements > India > Business transactions > Incoming excise invoices > Specify which movement types Involve excise invoices
for RG1 update
Regards
Venkatesh
assign points if useful

Delition of enteries updated in j1I5

Similar Messages

Maybe you are looking for