Deliver completed indicator is not getting updated in the PO item Overview

Hi Gurus,
We have the PO with quantity of 10 and it has been GR/IR, but the Delivery completed indicator is not getting updated (Checked).
The deliver completed indicator is selected in the config of t-code OMCD.
Also there is no tolerance limit is maintained.
Could you please suggest us why the indicator is not getting updating.
Thanks & Regards,
Sada

Hi check follwoing
1. Set Delivery complete indicator at plant leve
spro - mm --inventory mgmt ---Goods receipt --- Set delivery complete indicator
2. Control field selection for MIGO to disable users from changing it.
spro -- Materials Mgmt -->Inventory Mgmt -- Settings for enjoy Transaction -->Field Selection for MIGO
and chek this link
["Delivery Completed" Indicator
Regards
Kailas Ugale

Similar Messages

The currency is not getting updated in the table VBAP

Hi ,
The currency is not getting updated in the table VBAP. The currency was suppossed to be copied from the header table VBAK for a Sales Order. When the user creating a Sales Order the currency WAERK is not shown in VBAP table. VBAK-WAERk is in EUR . Does anyone know why is this happenning?
Currency is maintained in the Customer Master, Material Master and Sales Org. Any suggestions?.
Also it is happened for only one line item in a set of line items , Other line items did display the currency field.
The net Value has data in it .
The system is ECC 5.0
Regards,
Senthil

Dear Senthil,
Please apply the following notes (if they apply to your support pack level) and retest:
1460621 VBAP-WAERK is deleted after the sold-to party is changed
1426441 VBAP-WAERK deleted for subitems
1493998 VBAP-WAERK deleted for subitems
This should resolve the issue. I hope this helps.
Best regards,
Ian Kehoe

Overhead is not getting updated in the production order

Hi all,
I am running actual overhead calculation with KGI2.
But the overheads are not getting updated in the order.
Order contains relevant overhead key also.
What could be the possible causes?
SmanS

Arun/ Suleman,
Thank you for your reply.
I have maintained the % in the costing sheet against the 'Overhead rate' but I didn't get the secondary cost element.
Request you to elaborate it further & explain me how to maintain the same.
Also I will be thankful to you, if you could explain me the exact process of loading the overhead on the order i.e. how it loads the overhead form the cost center to order? What happens to the total cost which was lying on the cost center etc, in details.
Mean while I had maintained the required values in costing sheet in KZS2.
Maintained the % against material overhead rate as well as manufacturing overhead rate.
Maintained the credit values for the overhead rate.
Maintained the calculation base values also.
Now while overhead calculation with KGI2, I am getting two errors as follows,
1. S:K5:162 E02 20090831
2. Error CREDIT_SEGMENTS_ADD COIOB NOT FOUND for object
I can not figure out the reason.
SmanS
Edited by: SAP PP Consultant on Aug 10, 2009 6:47 AM

TDS amount not getting updated in the table under the field QBSHB

Dear Friends,
The TDS amount entered while booking the vendor invoices through MIRO T-cde, is not getting updated in the table BSEG under the field QBSHB.
Kindly let me know the reason for the same and guide me to correct it
TIA.
Regards,
Vincent

HI Vincent,
Bseg-QBSHB field is relavent for classic WT.
I hope you are using the EWT.
Hence if you post a document through MIRO it will not update
(but if you post document FB60 it will update but wrongly).
Reason is Miro document is posted through interface.
Hence SAP is suggested to not refer the Bseg-QBSHB and etc., fields.
refer only with_item table.
Please refer the below replay from SAP
Please refer the below note .363309
Please review attached note 363309 for detailed explanation
BSEG-QBSHB is designed to fill for the classic withholding tax. And
extended withholding tax information is stored exclusive in table
WITH_ITEM.
You can check in table BSEG for the fields and will find that system
do NOT update field BSEG-QBSHB.
In your line layout,you define a field BSEG-QBSHB. But actully the field
of vendor/customer line item is filled with zero from FI. Thus,it shows
zero in line item display.
And as note 363309 says,
"Remove the field which contains the withholding tax information
from your display variant.
If you want to display the withholding tax information, double-click on
the document number and subsequently choose 'Withholding tax' button."
(BSEG-QSSKZ, BSEG-QSSHB, BSEG-QBSHB) field is not relavent for
Extended withholding tax and not suppose to use in report FBL1N.
It basically does not make any sense to use the withholding tax fields
of the document line items (BSEG-QSSKZ, BSEG-QSSHB, BSEG-QBSHB) with the
activated extended withholding tax.
regards
Madhu M
Edited by: M Madhu on Jan 31, 2011 1:19 PM

Batch Classification data not getting updated during the GR of the PO

Dear Gurus,
While doing the GR of the Purchase order the classification data for the batch should get updated .However we can see those data in MSC2N (Change batch) but not in MSC3N (Display Batch) .While consultuing with SAP we found that the data in MSC3N is directly picked in the AUSP table but the data in MSC2 N reads the information directly from the
reference table field (MCH1-LWEDT & MCH1-LIFNR .My Qusetion is why this the AUSP entries are not getting updated during the GR itself.
Sumit Mohan

Hi Sumit,
I am not sure about your question, but if you want to populate the classification data during goods receipt then you need to maintain characteristics values in material master for classification tab under class type batch i.e. 022. After then it will apper during goods receipt for characteristics value for batch.
Regards,
Bhagat

Consumption values not getting updated on the material mastere

HI Gurus,
can anbody please explain me the reason why the consumption values not getting updated on the material master. What kind of movements qualify to get updated on the material master? is it 261, 101, 701 and 702 etc only? or any movement that means issues, receipts etc? I just happened to see a few materials which had some movements occur in the past but they did not get updated on the material master. These materials used to have ND MRP type until recently and these were changed to VM few days agao. could this be a reason? Please throw some ligjht on this. Helpful replies will be appreciated
Thanks
Anushga

Dear ,
Use tcode - OMJJ and then do the following setting -
for movement - 261,262, 201 and 202
Statistically relev. - 2
Consumption posting - R
for movement - 701 and 702
Statistically relev. - 2
Abhinay
Edited by: Abhinay Sachan on Sep 10, 2010 1:38 PM

BDOC status completely processed: data not getting updated

Hi Experts
I'm downloading BP data from R/3 system to CRM system , data is successfully getting into the CRM system when checking the SMW01 it was showing the status fully processed (status green) ,but data is not getting updated in tables.
Please let us know what could be the possible reason
Thanks & regards
Rajasekhar

1) First check the data in the BDOC. Check if the partners are really cmoing.
2) Check if there are any dumps created in ST22. If yes Pls analyze them.
3) Check the flow defintion for bdoc type BUPA_MAIN. You can check this in SMW01. Check if the actual call to upload the data and create BP is done.

Service Number is not getting updated in the Purchase Requisition

Hi All,
When i create a Service PR using bapi BAPI_REQUISITION_CREATE FM , service details ( Service number, Qty, Gross price, ) are not getting updated in Service tab of Purchase requisition transaction. I am passing all the services related parameters in the FM.
Please clarify this.
Thanks for the help.
Vinoth

Hi Vinoth,
Are you getting any error in the return table?Can you show your coding?
Regards,
ravi

Service Number is not getting updated in the PR called by BAPI

Hi ,
When i create a Service PR using bapi BAPI_REQUISITION_CREATE FM , service details ( Service number, Qty, Gross price, ) are not getting updated in Service tab of Purchase requisition transaction.
I am passing all the services related parameters in the FM.
Thanks for the help.
F.F

Hi Amar,
need your help. i am facing the same issue.
how did you resolved it . please let us know.
Thanks,
Santosh

Few keyfigures are not getting updated in the backup cube

Hi,
We run the daily backup process chain which extract data from planning
area and store in the cube & ods.
There are infopackages which update cube & ods, the datasource & info
source is same for both ODS & backup cube.
But a few keyfigures do not get updated in backup cube where as we see
ODS getting updated for those keyfigures. Also there exist data in the
planning area for these keyfigures.
There is direct mapping between the keyfigures in cube & planning area.
We tried to debug it and noticed that data gets updated in update routine table but not get updated in cube.
There are total 25 keyfigures in the cube , out of this only 5 keyfigures are not getting updated.
Need expert opinion on this.
Regards,
Chetana

Hi Chetana,
Check the backup step in your process chain. The Data Selection tab may have certain conditions on account of which certain keyfigures in your Backup Cube are not getting updated.
Check if any ABAP routine or any selection conditions are maintained which are causing certain keyfigs to be excluded.
~Rishi

MIRO - Business Area not getting updated in Vendor Line item

Hello friends,
I am posting Vendor invoice in MIRO transaction.
After Posting if i see the financial document generated,
Business area has not got updated in Vendor Line item.
What could be the problem ?
Please help me out.
Hari Prasath

Hi Kale,
Make sure the field Business area is not supressed in tx. OB14. for the GL account in line item 001.
On the other hand, have a look to the note and kba below:
41294 - Business area in customer/vendor item
Kba 1727802 - Business area not getting populated in sales/ purchase tax

Check number not getting updated in vendor line items

Hi
I am giving check to vendor. Hence i am assigning manual checks in FCH5. Then i did FCHU. After i did FCHU, my check number got updated in assignment field in bank line item. But i am getting problem for vendor line item.
My vendor line item is not updated with check number. Hence i am unable to see what check number is issued against which payment document. I do not want to go in each every document and then click on environment and check information.
I tried with check register also, but i am not getting vendor wise bank details smoothly.
So i want to know how can i get check number in FBL1N vendor-wise. Is there any standard report?

You should activate the PAYR-CHECF in FBL1N report. Execute FBL1N report for a vendor and go to Menu->Settings-> Special Fields. A new screen would open. There add the table PAYR and field CHECF. Save and exit out. Now the check number should be displayed in FBL1N report.
Thanks,
SD.

Excise Part-2 is not getting updated during the MIGO

Dear Experts,
When I am doing GR (MIGO), I am selecting the Excise posting transaction in "Excise" header tab as "Capture & Post Excise Invoice".
But, here after posting the GR, only Part-1 is getting updated. Part-2 is not updating. Moreover, if I try to post the same vendor excise invoice in J1IEX, it is giving the error as " Part-1 not yet posted even though Part-1 is updated. Can any body suggest what is the root cause for the same?
One more thing is, once I select "Only Capture Excise Invoice" during GR, in the normal process Part-1 is updating and I'll be able to post the Part-2 in J1IEX. There is no issue. But, I can't be able to post the Part-2 during GR.
Note: I am receiving the goods against with the STO. And, we are paying the customs against with the STO. After paying the Customs Invoice, we are receiving the goods into our manufacturing Plant from logical plant.
Thanks in advance for your action!!!!
Regards,
Satya
Dear

Hi Ashok,
I went through the above note. It explains the causes that why the posting is not happening in J1IEX.
And, as per the solution that is in that note, if we change the status of that excise invoice from 'P' to Blank in the table J_1IEXCHDR, then Vendor excise invoice will be cancelling.
So, I guess this can't resolve my issue. Because, my issue is if I select "Only Capture Excise", the Part-1 is updating in MIGO and I am able to post the Part-2 in J1IEX. But, If I select "Capture & Post Ecxise Invoice" in MIGO, then only Part-1 is updating and even I am not able to post the Part-2 in J1IEX also as the status of the Excise Invoice is "Posted".
And, this is happening frequently during MIGO while selecting "Capture & Post Excise". So, I guess the Function Module / BADI which updates the J_1IPART2 is not getting triggered during MIGO. Once it triggers in MIGO, then Part-2 will be posting in GR itself.
Could you please let me know the standard FM / BADI which updates the Excise Invoice Part-2 (J_1IPART2). So that I'll check with my ABAPer whether it is triggering or not during the MIGO.
Thanks,
Satya

APEX-The manullay created column is not getting updated in the database

Dear all
I have a form on page, which is created along with a report using Form on a Table with Report option. From the form I have deleted one field and recreated manullay as set the property as database column. When I am calling from the report page (using defualt edit option) the value is showing there, but if I am 'Apply Changes' , the column value in database is get updated with null.
Please help
DJ.

This is the SQL and PL/SQL forum.
Please re-post this on the APEX forum.
Oracle Application Express (APEX)

Cost center field not getting updated to the second level dso

Hi Experts,
Data is going from one DSO to other high level DSO where in the source DSO there is cost center filled for a Purchase order but it is not in the target DSO. Target DSO fetches data from 5 DSO's and this is one of them.
Please suggest.
Thanks
Sudha

Hi Sudha,
As you say that the load from source DSO to Target DSO is the final load, so question of overwrite does not come into picture.The only point which I feel is that the data might be getting resticted somewhere...
Is there any routine in the transformation for that field available which will be restricting the load from the source DSO to the target DSO. Is there any start routine available..Please check all these things...
Hope it Helps,
Thanks,
Amit Kr.

Deliver completed indicator is not getting updated in the PO item Overview

Similar Messages

Maybe you are looking for