Deliveries have to clear

we have Deliveries that are created previous month, but not invoiced and there are extremely old items that we need to get cleaned up . The amounts are small and nothing new has hit since 2009 so no one has ever bothered to clean these up, but we need to start doing so. Please advise as to how we can get these cleaned up. Do we need to invoice them and then write them off in AR? Or can we just cancel them somehow?

It has to be decided by the client due to the fact that already the inventory value has already been reduced by doing PGI. Now your client has to decide whether the related customer has to be debited or to increase their stock thereby their inventory value also !!!!!!!!
This is purely a functional decision.
thanks
G. Lakshmipathi

Similar Messages

Cannot remove autocomplete entry from address bar; have already cleared history, and entry is not in the drop-down menu of the address bar either.

I am having problems removing an autocomplete entry from my address bar; I have tried clearing my history, so it's no longer in that, and I do not have it bookmarked either, so it's not getting the URL from that location either. The autocomplete entry isn't even showing up in the drop down menu, so I can't even scroll through that to delete it.
Basically, I want to be able to type "st" and go to "store.steampowered.com"; however, despite numerous times of typing in "st" and then going down into the drop-down menu to choose "store.steampowered.com", the bar continues to autocomplete "steamtrades.com", which is exceptionally annoying because I do not have that website bookmarked, or in my history, yet it continues to autocomplete to that address, which I do not want it to autocomplete to, and cannot figure out how to remove because I've already cleared my history multiple times, do not have it bookmarked, and it is not showing up in the drop down of the address bar for me to go down and force delete it.

Did you try to remove some letters from steamtrades.com to see if that bring this entry up in the drop-down list?
If it is not in the history then it might be present with a typed=1 flag indicating that you have typed or pasted it in the location bar.
You can use the SQLite Manager extension in Firefox to inspect the places.sqlite file to see if this entry comes up in the moz_places table.
*SQLite Manager: https://addons.mozilla.org/firefox/addon/sqlite-manager/
<pre><nowiki>SELECT datetime(visit_date/1000000,'unixepoch') AS visit_date, url, title, visit_count, frecency
FROM moz_places, moz_historyvisits
WHERE moz_places.id = moz_historyvisits.place_id AND url LIKE '%steamtrades.com%'</nowiki></pre>

Same thing is happening to me. Adobe has not responded to anyone about this error. It appears that Abobe XI is not compatible with IE 11. I do not get this error when I use Chrome or Firefox. Only IE 11 does this. I have tried clearing cache and cookies.

Same thing is happening to me. Adobe has not responded to anyone about this error. It appears that Abobe XI is not compatible with IE 11. I do not get this error when I use Chrome or Firefox. Only IE 11 does this. I have tried clearing cache and cookies. I even uninstalled and re-installed IE 11. It is still doing it. I am surprized that a company like Adobe would just ignore our posts and leave us hanging this this.
Error message is FAILED TO GET DISPATCH FROM IBRWSR2. Then when you click on it the next error message says: PHTML IS NULL. You have to click this error message twice and then the PDF finally loads. Happened every time
Does anyone have a solution since Adobe will not respond?
As a last resort I will try uninstalling the Adobe Reader XI and install Adobe Reader 10 instead. It seems to work ok. But when I try to install version 10 the Adobe site tries to install XI. Any ideas?
JimP08758

It worked just fine for me.
Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache and
* Remove Cookies '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
Type '''about:preferences'''<Enter> in the address bar.
* '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
* '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
If there is still a problem,
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.

970 GAMING black screen when boot on cold start, have to clear CMOS everytime

I have 970 GAMING w/ FX8320, it shows black screen when boot on cold start, have to clear CMOS everytime to enter default.
I have updated it to the up to date M11 bios. Once it boot up, it functions OK no matter whether you reboot or reset it. But after turned off a few hours (cooled down), it shows on black screen again on boot, all LED lights up OK, but I can hear the fan like keep rebooting, any idea?
PSU seasonic 430W, GPU HD7750.

In what DIMM slots did you insert your memory? I just got and at this moment building a new computer with a 970.
A horrible experience I had with my last build reminded me of it. My board was am MSI A88XM-E45. DIMM1 is blue, DIMM2 is black, DIMM3 is blue, & DIMM4 is black. When using two sticks of RAM, it says to install one on DIMM1 & the other in DIMM3 (Makes sense... After all, it's color colored that way).
Well it would not boot. I reseated every component and for HOURS tried almost everything. Finally I decided to place my two sticks of RAM in the first two DIMMS and viola!
I think I will begin this build the same way.

My iTunes account keeps syncing someone else contacts to my fone which is wiping my ones I have to clear my fone then back it up again then it does it again can someone help please

My iTunes account keeps syncing someone else contacts to my fone which is wiping my ones I have to clear my fone then back it up again then it does it again can someone help please

If it is itunes on your computer - stop people from connecting their phones to your computer, do not connect to others.
If it is icloud - change your apple id password here
iforgot.apple.com

Why do I get Publish Failed Error Message when trying to publish a project to SWF. I am using Captivate 6 (32 Bit) Version 6.0.1.240. I have tried clearing the Cache and renaming my Preferences folder

Why do I get Publish Failed Error Message when trying to publish a project to SWF. I am using Captivate 6 (32 Bit) Version 6.0.1.240. I have tried clearing the Cache and renaming my Preferences folder

Try the troubleshooting tips here:
http://www.infosemantics.com.au/adobe-captivate-troubleshooting/basic-troubleshooting-tech niques
You may have something in your project on one of the slides that is tripping up the publishing process.

Have to "clear arp" table to get traffic to pass

I have a very unusual problem that I can't figure out. We have a 2800 series router we are using as our voice gateway. It has been running fine for about 6 months but then a few days ago, it started dropping off the network every 10 minutes or so. We initially found that unplugging the patch cable and pluggint it back in would correct the problem temporarily for another 10 minutes or so. However, now we have discovered that the simply running "clear arp" on the router gets it back up and running.
Here is what happens. The router drops off the network, not pingable by CallManager or Unity. If we do a clear arp, it is immediately back up and going again.
We have updated the IOS, even changed from spservices to ip voice ios, moved it to a different switch, and even set the arp entries manually, but we still have to clear arp every few minutes to keep it up. When it stops responding on the network, we can console into it and look at the arp table, and its right. But until we issue a clear arp, it can't connect to certain network devices like CM and Unity.
Any ideas?

The problem is almost surely due to duplicate addresses somewhere. Someone has probably accidentally configured the gateway address as the static IP address on a different device on the same LAN segment. Or, the gateway address was accidentally given out via DHCP.
Regardless, I'd bet money that something like this happened.

What is the best program and/or method to have crisp clear text in FCP?

What is the best program and/or method to have crisp clear text in FCP?
I have the CS4 Production suite.
Thanks

What is the best work flow to use? For example creating text in Motion, AE, PS, or AI and then bringing it into FCP.
I used Motion and the text looks jagged. I though Motion was vector based and I don't understand why the edges aren't crisp and smooth.
I'm just starting to learn these programs and want to create good working habits.

Do i have to clear cmos after updating bios?

hi im about to update my bios to 1.9 ... do i have to clear cmos after bios update finish? and also clearing cmos is as easy as removing the battery for a while then putting it back in right?

in my opinion Clear Cmos should be always done after flashing,
to ensure that new BIOS will operate as intended
if you need see here for guide:
>>Clear CMOS Guide<<

Does it cost any money to go to apple and have them clear my iPad 2? I want it wiped out.

Does it cost any money to go to apple and have them clear my iPad 2? I want it wiped out.

GreenwichCardinal72 wrote:
Does it cost any money to go to apple and have them clear my iPad 2? I want it wiped out.
ERASE / Clear All Data
See Erase your device Here > http://support.apple.com/kb/HT4137
Go to Settings > General > Reset > Erase all content and settings
More Info here...
What to do before selling or giving away your iPhone, iPad, or iPod touch

Hp 3915. vista 32 "print queue issue" and i have to clear print queue and redo print.

hp 3915. vista 32 "print queue issue" and i have to clear print queue and redo print. I think it may be a driver issue. Is there a driver for 3915 using Vista. Mine says only 2000 and XP. Thanks.

Hi there ken4863,
Try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Firefox isn't always compatible with logging onto my comcast email account. I have to clear the cache and then I'm able to back into my email account. Is there a way to permanently resolve this problem? Thanks.

Firefox isn't always compatible with logging onto my comcast email account. I have to clear the cache and then I'm able to get back into my email account. Is there a way to permanently resolve this problem? Thanks.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
*https://support.mozilla.com/kb/Cannot+log+in+to+websites

Does anyone have a clear solution as to why my new iPhone will not send text messages to some numbers.

Does anyone have a clear solution as to why my new iPhone 5 will not send text messages to some numbers?

I had problems the first few days with text messaging on my new cell. I checked my new contract service thru AT&T online, and it turned out the guy who set up my phone didn't sign me up for the unlimited texting I told him I HAD to have! I just had to add texting back into my contract.....problem solved. I hope your problem is solved this easily.

TS4009 i have deleted items that seem to have filled my storage but it does not seem to have emptied/cleared it out.

i have deleted items that seem to have filled my storage but it does not seem to have emptied/cleared it out. What step have I missed to clear out my icloud storage? Thank you.

How long was it in storage & what battery percentage was it originally stored with? You can kill Lithium batteries if they are not stored properly is why I ask.

Cookie settings are correct;history,cookies and cache have been cleared.Still some sites say I need to enable cookies

Cookie settings are correct;history,cookies and cache have been cleared.Still some sites say I need to enable cookies.

You need to enable third-party cookies if you want to logout from Hotmail. If you do not want to enable third-party cookies (I don't) then you need to remove the live.login and passport.net cookies yourself.
See also [[Disabling third party cookies]]

Deliveries have to clear

Similar Messages

Maybe you are looking for