Delivering Caller ID via 28XX to Nortel Option 61
We would like to introduce caller ID into a phone system that is currently running a Nortel Option 61. Two PRIs will be terminated into two 28XX routers that will be frontending the Opt61. We are doing this to position ourselves to eventually migrate to IPT. The connection between the 28XX and the Opt 61 I am assuming will be PRIs running QSiG? Any gotchas out there or things I need to be aware of that people may have seen? No CUCMs yet so these gateways will be standalone caller id gateways for the OPtion 61. Any advice would be appreciated.
Hi Johnny,
You will probably want to use the 2-PRI (VWIC2-2MFT-T1/E1) to maximize the 2800 series potential here;
VWIC2-2MFT-T1/E1 Support;
Any native HWIC slot on Cisco 2801, 2811,
2821, 2851, 3825 and 3845 and any VIC slot
on NM-HDV, NM-HDV2, NM-HD-2VE,
NM-2W, NM-1FE1R2W, NM-1FE2W-V2,
NM-2FE2W-V2
Cards, Ports, and Slots
Cisco 2801: 2 HWIC slots, 2 VWIC slots, 2 PVDM slots, 2 AIM slots
Cisco 2811: 4 HWIC slots, 1 expansion network module slot, 2 PVDM slots, 2 AIM slots
Cisco 2821: 4 HWIC slots, 1 expansion network module slot, 1 extension voice/fax module slot, 3 PVDM slots,
Cisco 3825: 4 HWIC slots, 2 expansion network module slot, 4 PVDM slots, 2 AIM slots
Cisco 3845: 4 HWIC slots, 4 expansion network module slot, 4 PVDM slots, 2 AIM slots
http://www.cisco.com/en/US/prod/collateral/routers/ps5854/product_data_sheet0900aecd80169812.pdf
Hope this helps!
Rob
PS: We found the 2821's to be an excellent choice.
Similar Messages
-
CUCM 8.6 QSIG to Nortel Option 81 No Caller ID
Working on an H.323 QSIG trunk to Nortel Option 81. Everything is working except caller ID on local calls. Cisco phones making local (7digit) calls only display the lead trunk (BTN) number for caller ID. Long distance calls display the correct caller ID. The Nortel has a separate local and LD trunks. Nortel phones have correct caller id displayed for both local and LD calls.
Topology/Call Flow
Cisco Phone -> CUCM -> 2911GW -> Nortel ->PSTN
Gateway is a 2911 running 15.0(1)M5
It looks like we are sedning the same information to the Nortel on both callS AND the Q931 information on both calls looks to be correct.
Local Call (Not Working)
*Sep 19 20:24:26.865: ISDN Se0/0/0:23 Q931: Sending SETUP callref = 0x5429 callID = 0xD3B2 switch = primary-qsig interface = Network
*Sep 19 20:24:26.865: ISDN Se0/0/0:23 Q931: TX -> SETUP pd = 8 callref = 0x5429
Sending Complete
Bearer Capability i = 0x8090A2
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98384
Exclusive, Channel 4
Calling Party Number i = 0x0081, '4065565382'
Plan:Unknown, Type:Unknown
Called Party Number i = 0x80, '95998310'
Plan:Unknown, Type:Unknown
*Sep 19 20:24:26.941: ISDN Se0/0/0:23 Q931: RX <- CALL_PROC pd = 8 callref = 0xD429
Channel ID i = 0xA98384
Exclusive, Channel 4
*Sep 19 20:24:28.077: ISDN Se0/0/0:23 Q931: RX <- ALERTING pd = 8 callref = 0xD429
Long Distance Call (Working)
*Sep 19 20:26:31.213: ISDN Se0/0/0:23 Q931: Sending SETUP callref = 0x542A callID = 0xD3B3 switch = primary-qsig interface = Network
*Sep 19 20:26:31.213: ISDN Se0/0/0:23 Q931: TX -> SETUP pd = 8 callref = 0x542A
Sending Complete
Bearer Capability i = 0x8090A2
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98383
Exclusive, Channel 3
Calling Party Number i = 0x0081, '4065565382'
Plan:Unknown, Type:Unknown
Called Party Number i = 0x80, '912088306374'
Plan:Unknown, Type:Unknown
*Sep 19 20:26:31.293: ISDN Se0/0/0:23 Q931: RX <- CALL_PROC pd = 8 callref = 0xD42A
Channel ID i = 0xA98383
Exclusive, Channel 3
*Sep 19 20:26:31.449: ISDN Se0/0/0:23 Q931: RX <- PROGRESS pd = 8 callref = 0xD42A
Cause i = 0x81E4 - Invalid information element contents
Progress Ind i = 0x8188 - In-band info or appropriate now available
*Sep 19 20:26:35.313: ISDN Se0/0/0:23 Q931: RX <- ALERTING pd = 8 callref = 0xD42A
So it apprears to be something on the Nortel side??? What can I check on the Nortel to see how these two calls are recieved and routed to the locan and LD trunks.Have you had any luck solving this issue?
I am having the exact same problem. What I have found is that the local provider is saying that the number is not coming across in E.164 format which then appears to them as an unknown number so they just append either the main phone number to the caller ID or sometimes the phone number associated with billing contact. The nortel works just fine in both senarios, but there seems to be something lost in translation between the Cisco and Nortel. So far I haven't been able to find a setting to fix this. -
VoIP between Norstar and Nortel option 11
Hi, i have some problems in the calls between a Norstar and a Nortel option 11, both are connected to a 2811 via E1 with the IOS is c2800nm-spservicesk9-mz.124-15.T3.bin both routers are using h323. We also have a Callmanager 5.1.2.3000-2 that interact with both PBX.
The problem is that when i make a call from the Norstar to the Nortell or CCM the call listens choppy and sometime the voice goes only one side.
Do you know of some debug that i can apply to see ISDN errors, h323 errors, or QoS errors.
Thanks in advanced
JoseWell the IAD is configured for E&M immidiate which is completely different from R2 even though they are both a way to do CAS.
http://cisco.com/en/US/tech/tk652/tk653/tk755/tech_protocol_home.html
E&M:
http://cisco.com/en/US/products/sw/iosswrel/ps5207/products_configuration_guide_chapter09186a008020ecf6.html#wp1021994
R2:
http://cisco.com/en/US/tech/tk652/tk653/technologies_configuration_example09186a00800ad389.shtml
http://cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a00800942f2.shtml -
Error calling appl. via OLE OA175 after inst. Patch4 or 5 of SAPGUI 7.20
I have maintained a OLE application with the "oaa4 ArchiveLink:Application Maintenance" to do special work on documents with special type.
It worked very well until I installed the Patch4 or Patch5 of the SAPGUI 7.20.
Now I get the message: "Error calling Application via OLE ...".
It looks like a bug in the patches but may be there is something wrong with me (or my application). Has someone any experience with this patch or with this error message.
In the meantime I got an answer:
You have to grant your OLE application in the security options in the SAP-GUI-Configuration.
Edited by: Terkosh on Feb 13, 2012 3:48 PMhow do I grant the OLE application ?
-
Hi All,
I'm trying to connect our SolMan development to the CEN. However when registering ccmsr within J2ee admin it gives the following errors.
Does anybody have an idea?
Output for : /usr/sap/DSM/SYS/exe/run/sapccmsr(-j2ee,-v,pf=/usr/sap/DSM/SYS/profile/DSM_DVEBMGS00_ijmdsm01)
CCMS version 20040229, 64 bit, multithreaded, Non-Unicode
compiled at Oct 28 2006 systemid 324 (IBM RS/6000 with AIX)
relno 7000
patch text patch collection 2006/4, OSS note 914721
patchno 83 intno 20050900
running on ijmdsm01 AIX 3 5 00C97C6E4C00
Logfile for : /usr/sap/DSM/SYS/exe/run/sapccmsr(-j2ee,-R,-f,/tmp/csm53771.conf,pf=/usr/sap/DSM/SYS/profile/DSM_DVEBMGS00_ijmdsm01) [Thr 01] Mon Mar 26 13:29:05 2007
INFO: CCMS agent sapccmsr working directory is /usr/sap/ccms/DSM_00/sapccmsr
INFO: CCMS agent sapccmsr config file is /usr/sap/ccms/DSM_00/sapccmsr/csmconf
INFO: Central Monitoring System is . (found in config file)
INFO: additional Central Monitoring System is . (found in config file)
INFO: found ini file /usr/sap/ccms/DSM_00/sapccmsr/sapccmsr.ini.
INFO: Checking Distributed Statistical Records Library dsrlib.o
INFO: checking version an Unicodeness of dsrlib.o
INFO: DSR: Dynamic Library dsrlib.o (version 22) successfully loaded.
INFO: DSR: Dynamic Library dsrlib successfully loaded.
INFO: DSR: Path /usr/sap/ccms/DSM_00/dsr for Distributed Statistical Records.
INFO: CCMS version 20040229, 64 bit, multithreaded, Non-Unicode compiled at Oct 28 2006 systemid 324 (IBM RS/6000 with AIX) relno 7000 patch text patch collection 2006/4, OSS note 914721 patchno 83 intno 20050900 running on ijmdsm01 AIX 3 5 00C97C6E4C00 pid 479452 profile /usr/sap/DSM/SYS/profile/DSM_DVEBMGS00_ijmdsm01
INFO: Attached to Shared Memory Key 73 (size 40000000), no pool used
INFO: Connected to Monitoring Segment segment status WARM_UP segment started at Thu Mar 22 08:58:40 2007 segment version 20040229
INFO: DSM:000:999999 connected to DSM, host ijmdsm01, System Nr. 00, traceflag
INFO: DSM release is 700 , (kernel release 700 )
ERROR: DSM:000:CSMREG calling SALS_MS_GET_LOCAL_MS_INFO via RFC failed, can not get version of DSM. RfcRc = 2, C_CALL_FAILED</b>
INFO: SLM:000:999999 connected to SLM, host rthuas50, System Nr. 10, traceflag
INFO: SLM release is 700 , (kernel release 700 )
INFO: SLM:000:CSMREG connected to SLM, host rthuas50, System Nr. 10, traceflag INFO: SLM release is 700 , (kernel release 700 ), CCMS version 20040229 INFO: RFC logon info for SLM:000:CSMREG can be updated at any time with -R option: sapccmsr -R INFO: Updated saprfc.ini in agent work directory /usr/sap/ccms/DSM_00/sapccmsr
ERROR: Registration failed: Can't get version of DSM. RfcRc = 2, C_CALL_FAILED RFC Error Info for SALS_MS_GET_LOCAL_MS_INFO message: status: EXCEPTION C_CALL_FAILED RAISED intstat: Mon Mar 26 13:29:10 2007 INFO: dsr: dsrlib unloaded.
...closing this logfile...
Registration of CCMS Customizing Destination
Error during registration of CCMS Customizing destination
Source system cannot be set to UnicodeHi,
Check these notes.
641339 - RZ20: CCMS monitoring context loses client assignment
558608 - Correction: Starting/stopping LDAP Connector via CCMS
827843 - Access Alert Analysis Methods that are Defined Locally
Feel free to revert back.
--Ragu -
Hi experts
in interaction center, the users can see the call lists assigned, but they can't modify it.
So, is possible change/delete call lists via WEB UI??? For example add a call at the list, or delete all the call list??
Best regards
MarcoHi,
Starting CRM 7.0 SP4 a lean version of the Call List Management application was developed.
It does not cover all the functionality of the SAP GUI application.
Here is a list of features that are covered in this version of the WebUI application:
- Quick search
View options: tile layout and editable overview page with assignment block
- Advanced search
View options: tree view and table view
- Creation of new call lists
- Edit existing call lists
Update contact persons: When editing a call list, you can update the contact persons. By default, the relationship type Has contact person is considered. Contact persons for whom the Do not contact checkbox is selected, are not added to the list of contact persons.
The following tabs are available:
Call List Details
Execution Progress
Assignment
You can create and delete assignments.
Calls (display only)
Business context (display only)
If you are interested in using this lean version you must upgrade to CRM 7.0 SP4, where this functionality has been made available or else you can always carry on with the SAPGUI version of the transaction CRMD_TM_CLDIST.
Hope this information helps.
Best Regards,
Vinod -
QoS - Nortel Option 11c thru 2811s
Looking for config assistance on a couple of 2811s, connected via a T1 that will carry voice traffic between 2 Nortel Option 11c's.
Will 'auto qos voip trust' on the serial interfaces suffice?
Does a 'map' function need to be defined?Hi, that is the minimal config to protect voice traffic:
class-map voice
match ip dscp ef
policy-map test
class voice
priority percent 50 <--- you are allocating no more than 768 Kbps to voice
interface serial X/Y
service policy output test
Hope this helps, please rate post if it does! -
Questions regarding FaceTime: When I call someone, it rings but they can't answer and when someone calls me via FaceTime it won't even ring.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
Cheers, Tom -
Just downloaded FACETIME on my 4yr. olf Imac running Snow Leopard. When making a call to my friend's Imac all works correctly going both ways. When my wife calls me via Facetime from her Ipad, I cannot click on "accept"- not there? When called by the Imac (newest), the "accept" or "reject" radio button appears for me to click and connect. On my wife's Ipad the two radio buttons always appear when a call actiivates Facetime and comes on?
There is nothing I can find in "Preferences" in Facetime to turn that on or off. I suspect it has to do with having a more current operating system; that the "controls" are in the operating system? [I'm guessing] It's frustrating getting Facebook calls from several friends on Ipads! Any ideas...VFPI suspect it has to do with not having a more current operating system
Exactly, what Apple is doing is leveraging new features only on newer OS X versions to force you to upgrade OS X to 10.7 or later.
What they don't tell you is 10.7 or later will NOT run your PowerPC based software, some of it you can't get Intel versions like for perfectly working printers, scanners and games etc. So it can be a very expensive OS X upgrade to 10.7 or later with third party software.
http://roaringapps.com/apps:table
Also they don't tell you is the risk in bricking your machine if the update goes badly, so you have to have AppleCare in case that occurs so it's on them to fix it. Else your paying money to replace the logicboard or buying a new machine prematurely.
A four year old machine can't have AppleCare, it's only good for 3 years from date of purchase new.
Your machine came with a boot hard drive, it's usually got about 4-5 years of life on it, then it needs to be replaced.
Also they don't tell you the newer OS X version has more abilities and features that causes your machine to slow down in performance, especially on older machines.
Also they implement new, idotic and extremely fustrating new user interface features in a arbitrary "you take it or leave it" manner with little or no fall back method.
So upgrading OS X is a gamble on older machines that otherwise would likely work perfectly fine for the next 5 years if one didn't need to have to mess with it.
Since Snow Leopard has slightly over 25% OS X version market share, your still good for security updates etc for the next few years if you just want to stay where your at and be happy.
OS X 10.4/10.5 need to upgrade, 10.6.8 ok still
The Lions are, well, not so welcome due to Scott Forstall retard UI issues, OS X Mavericks 10.9 is likely going to fix things a bit better.
But basically what is occuring is Apple is trying to force a faster hardware upgrade cycle with the more expensive products by leveraging features on the smaller devices that expire sooner.
Apple is a hardware company that leverages whatever it can to get you to buy more hardware, it's why they are as rich as they are. -
Hi,
I would like to know the procedure to call BEx via VB script. Some background about the issue.
I am in the process of performing the stress test for the BI 7.0 using mercury load runner. So, from the mercury i will be calling the VB script to execute the BI query.
Any help will be highly appreciated.
Regards
SachinHi,
Have a look at this Doc:
www.bwexpertonline.com/downloads/boeke04.doc
Hope this will be helpful.
Regards,
Prema -
How application call servlet via https
Hi guys
Does anybody know how application call servlet via https? Is it same as
http? How can I set up trusted certification? Thanks in advance.
Regards,
Mark.I meant to give a code example in the last one, sorry.
URL u = new URL("https://mysecureURL.com");
javax.net.ssl.HttpsURLConnection conn = (javax.net.ssl.httpsURLConnection) u.openConnection();There is other good info in the JSSE forums.
Cheers,
Peter. -
I am using ios7 , while i am getting call i am not getting reject option, What could be the issue?
Hello Mallikarjunaj
The decline button will only come up when you are using the phone, like surfing the web or reading a message. Check out the article below for more information.
iPhone: Silencing or Declining a Call
http://support.apple.com/kb/TA38605
Decline a call
Do one of the following:
Press the Sleep/Wake button twice quickly.
Press and hold the mic button on the headset for about two seconds, then let go. When you let go, two low beeps confirm that the call was declined.
Tap Decline. Decline appears only when you’re using iPhone.
Regards,
-Norm G. -
if we dont want to use sleep/wakeup button for dissconnect the call so there is any other option for dissconnect the call without using sleep/wakeup button in ios 8.1.3 . kindly suggest..!
Hello kumar kalptaru,
Thank you for participating in the Apple Support Communities.
It sounds like you're wondering how to hang up a call besides using the Sleep/Wake button.
Other than this, you can tap the red hang up button on the Phone app. See the iPhone User Guide for more help:
While on a call - iPhone
End a call. Tap or press the Sleep/Wake button.
Best Regards,
Jeremy -
OLE with c# for SAP AL - Error calling application via OLE GUIScanDoc
Hi,
I am creating a small scanning application which should be accessible from SAP. I read the documents from SAP side which says, we need to create an OLE 2.0 Enabled application. I created an OCX application in vb6 and configured with SAP. the call is going to my ocx application but dont know how to implement "GUIScanDoc @AID,N" in my application. I tried to create a function named GUIScanDoc () in ocx but getting the same error stating *"Error calling application via OLE GUIScanDoc".
If anyone has solution then plz plz help me out.
Thanks in advance.
P. Ramesh
Edited by: rapr04 on May 22, 2011 2:37 PMI think you posted this in the wrong section of the forums, this area is just for SDK's relating to the BusinessObjects products.
-
OAWD - Error calling app. via OLE
OAWD is a new transaction for my users. We are in testing and are receiving an error message "Error calling application via OLE ...".
ST01 trace is clean, but a workflow item does not always route to the mailbox. Functional consultant says it is a security issue. S_OLE_CALL is assigned to the users with required values (does not appear in trace). I have already checked the standard role SAP_BC_SRV_ARL_USER and the Archive link documentation with no success.
Any suggestions? Have you seen this error before?I have teh same problem, when i am trying to attach a zip document in transaction ME53N.
I am getting the following error:
" Error Calling Application via OLE ALVIEWER.APP"
Could anyone help me with this issue?.
Thanks a lot
David
Maybe you are looking for
-
My new Zte Open c IMEI is disappeared after update.
Hello, I try to make a manual update on my Zte Open C following the instructions you provide here ( https://developer.mozilla.org/en-US/Firefox_OS/Developer_phone_guide/ZTE_OPEN_C ). Everything appear to be ok until the phone was rebooted(at 98% of t
-
Hi, I have an issue with Leave Request for Edit/Cancel options: - if employee cancels/edit leave request (that has been previously created in portal), the application works fine. - if employee has an absence created directly in backend, when he
-
All of a sudden my weblogic server is giving error while I am trying to run startWeblogic.cmd The admin server log trace is : D:\Middleware\SOASuite11g\user_projects\domains\SOAOSBDevDomain\servers\AdminServer\data\ldap\XACMLRoleMappermyrealmInit.ini
-
I have become cheesed off with the slow speed at which my Java programs execute. I believe that Java doesn't really compile its source code, rather it converts it into some other kind of wierd stuff that will work on any computer. As you have guessed
-
Acrobat 9.1 Pro erkennt Scanner Canon MP980 nicht
Guten Tag, gerade wollte ich ein Formular einscannen um es am Rechner auszufüllen. Ich nutze Win 7 Home Home Premium 32bit und Acorbat 9.1 Pro. Ichgehe also zu Formulare - Formularassistent starten und wähle dort meinen Scanner aus, der angeboten wi