Delivering plant different in freegoods order

Hello,
Material is created in x and y plants, but Y is the delivering plant defined in Material Master. it does not have CMIR, in customer there is no delivering plant maintained. this material is the free goods material for material A. now when i raise a sales order with A material, free goods material is determined, but the delivering plant is X. could you please assist me on this.
points will be given accordingly, for the immediate responses.

Hello All,
thanks for your replies and i have awarded points as well.
But the issue is not solved fully.
Freegoods material is been extended to plant X and Y. but the delivering plant is Y. user wants the plant Y to get determined in the order. but it is determining the plant X. before they extended the material to plant X, material was created in plant Y. when the sales order is raised, thought it is a freegood and the main item has plant X, it was determining plant Y as the delivering plant for freegood material.
i have verified this. now i am confused how shalli go about.
please suggest me some ways to go head.
thanks in advance.

Similar Messages

One sales order delivering plants are different one plant is excisable

Dear SD Experts,
My requirement in sales order is to calculate taxes when two line item has different delivering plant for one customer. One plant is excisable and another plant is non excisable what pricing procedure should i use and what condition record i should maintain for that. Plz guide me How to do this?
Regards,
Manzoor

what pricing procedure should i use
Only one pricing procedure is enough
One plant is excisable and another plant is non excisable
For this, you should have two tax codes maintained in VK11 by differentiating with material tax classification.
sales order is to calculate taxes when two line item has different
delivering plant for one customer
Change the tax classification in sale order at item level for one line item.
thanks
G. Lakshmipathi

Delivering Plant In CRM Order

Hi,
I need SAP CRM Field delivering plant.
Does Anyone know how I can get this field from sales order CRMD_BUS000115.
I need it for a condition pricing.
Thank you
Lidisaid

Dear friend,
I had lots of problem with PLANTs in CRM because the only information about that it is stored in the table CRMM_LOCMAP (access with SM30 ). If the table is empty you need to download object DNL_PLANT.
In this table there is only a BP id in CRM that represent the Plant, and their ids in ECC or R/3 system.
In this subject CRM behaving different, because in ECC or R/3 there is a specific place to store Plants details, for CRM plants are Business Partners.
In the sales document CRM fill at the partner procedure a partner type Plant with the BP id that represent the Plant, and then, through the middleware this information arrive in ECC or R/3, and in the back end system all necessary processing for Plant happening. The execution to transform a BP in CRM in the Plant in ECC system the moust part it is hard code in the middleware, so it is impossible to change this behaving.
In my previous project I sent a message to SAP support complaning about the different behaving and information about Plant in CRM and ECC system, and SAP answered me that, for SAP vision, Plant it is not relevant for CRM process (front end).
So, if you need to create a new condition based on Plant information, in CRM could be impossible.
In my case, the solution was, sales order that needed information about Plant I create in CRM through BOR conection, so in fact, the order was create in ECC system with a link in CRM.
Good luck,
Lalas

Split Sales Order Line - by Delivering Plant ?

Hi there,
Does anyone know (config or ABAP) how to split a sales order line for this scenario:
1 Sales Org - SOrgA
3 Plants (PlantA, PLantB & PlantC)
Can fulfill SOrgA sales orders from all 3 plants
No WM
User enters MatA Qty 10 on sales order line item 1.
MatA has qty 5 in plantA and qty5 in PlantB.
System gives Qty 5 to line item 1, reduces qty requested to 5.
Stytem creates new sales order line & gives Qty 5 to new line item 2.
I am essentially trying to fulfill the sales order from multiple plants but so far in R/3 I do not see any way to do this with config. Alternative is to do this manually but business requirement is to automate it.
Any ideas?
Has anyone done something similar with ABAP?
Thanks,
Niall

Thanks for your comments Ashutosh,
My strawman schema is currently:
Biz Hours:
Orders created.
Nightly:
[No (minimal) orders being entered so allocation should be a non-issue or very minimal].
Backorder rescheduler job runs
Bespoke job runs to split lines if can fulfill from multiple plants
- it may be FIFO based on a combination of dates such as customer delivery date and delivering plant lead time (will be bespoke)
Delivery Due List runs
Currently our sales order lines have delivering plant (e.g. from customer master, CMIR or material). Against this plant ATP is run, even though the material may also be in another plant. The business issue is that sometimes, for some customers, we want to fulfill the order from a different plant or combination of different plants.
This is not for every order thankfully!
N.

Delivering plant's maintenance and determination on sales order

Hi
We would need to maintain delivering plant on vendor level for sales order but as this is not possible we might want to maintain it on article master data. Our biggest problem si the time perspective. It should be possible to maintain the plant so that it has a validity period. An article's delivering plant might hence change in the future and the sales order items that have a delivery time after this date should get the new plant. We have a huge amount of articles and a huge amount of sales orders so manual maintenance of each sales order item is out of question.
Any suggestions for soving this? Amount of articles and sales order item is so big that manual maintenance is not possible. Sales order items are also created far to the future.
Thanks and br
Seija

Welcome to SDN forum.
Well, the delivering plant is proposed from the the ship-to party customer master.
Provided the ship-to party is different from the sold-to party.
So, if you have same partner numbers to ship-to party & sold-to party then preference will go to sold-to party.
Say,
Case1
Sales Partner
Customer Number
Delivering Plant
maintain in respective customer master
SP - Sold-to Party
ABC123
ZY02
SH - Ship-to Party
ABC123
ZY01
In above case, the delivering plant ZY02 will be from sold to party.
Case2
Sales Partner
Customer Number
Delivering Plant
maintain in respective customer master
SP - Sold-to Party
ABC123
ZY02
SH - Ship-to Party
ABC321
ZY01
In above case, the delivering plant ZY01 will be from ship-to party.
Regards
JP
Here I have assumed that delivering plant determination is happening on based on customer master

How to update the Delivering plant in sales order

Hi Guru's
I have a scenario where the delivering plant(RV45A-DWERK) in the sales order overview is not updated.
I have maintained the VD51 customer info record
in customer master and also in material master.
Even if i update manually in the sales order and then save it is not updating
when i got va02 and check it is blank
regards
sphoorthi

***Hi,***
***As replied by many ,Plant is determined from CMIR/MATEIRIAL MASTER/CUSTOMER MASTER.***
***First check by maintaining plant in CMIR and check whether it is determined in SALES ORDER?***
***Before that check in VOV8 in document type check the field "Read inford record",***
***then check by maintaining plant in Customer master,and check if determined in SALES ORDER?***
***then check by maintaining plant in material master and check if deterimined in SALES ORDER?***
***If still ,problem then u can check the user exits,***
***Thanks***
***Jai***

Delivering plant on sales orders

Hello
I know that if I access to transaction XD02 under Sales Area Data on Shipping tab, I can set the Delivery Plant field, in order to take it automatically when I create a new sales order for that client, but, I am able to change it, does anyone know a way to lock it in order to no one could change it at sales order?
Thank you in advance
Regards

I saw that I was able to change it on the sales order,
Sorry by oversight, I have not seen this comments. To achieve this requirement in sale order, I am not sure whether your requirement is at header level or item level. If I am correct, for header level delivering plant, the object name is C_AFKO_AWK which you have to change this field to display with the help of your basis team.
thanks
G. Lakshmipathi

Country of Delivering Plant is not showing in Sales Order Pricing Analysis

Hello All,
I have created a new condition table with the field Country of Delivering Plant (KOMK-WKCOU).
But in the sales order pricing analysis this field is not fetching the country of the plant (it is showing the Yellow color exclamation icon).
This is a standard field, I am not able to understand why it is not fetching this field.
I have used the same field for tax condtions in my previous projects as well, there it worked well.
Even I have activated the KOMK structure in SE11 also, but still the same problem.
Can anybody tell me how to resolve this issue.
Thanks & Regards,
Sreehari.

Rightly suggested by Shiva.
As plant determines at item level.
So, instead of KOMK-WKCOU, field should append in KOMP.
FYI, for checking any inconsistency in condition table, you can use TCode VK+C.
Regards
JP

Can i restrict a manufcaturing plant as delivering plant in order type

dear all,
How can i restrict a manufcaturing plant as delivering plant in order type of Depo sales,
thanks...

A manufacturing plant is where stocks of a material are kept and is assigned to a company code.
If a plant is assigned to the Sales Organization and Dist Channel, it is called Delivering Plant. Basically without this assignment, you cannot make any deliveries.
The system copies the plant data into the sales order from the relevant entries in the master records based upon the following priorities:
1. Customer material information master record
2. Customer master record
3. Material master record
The plant data is coming into sales order because of assignment of plant to Sales Organization and Dist Channel.
Hope this clears your doubt

Delivering plant in sales order

hi all,
how to make delivering plant is sales order mandatory without using any incompletion procedure.....
the requirement is the user after entering Sold-to party must enter delivering plant and only
after that the material can be enterd at item level.
Please suggest some alternatives.

Hello Sushant,
If you don't not want to use incompletion log then try this out by using authorization object t-code "SU21".
1. Here just create object class and then create a authorization object.
2. When you want to change the authorization field for an object then this is only possible after all the authorization the object uses and all the calls of the AUTHORITY-CHECK language command have been deleted.
3. Just create an activity "ACTVT" in the authorization object and specify the activity permitted for this under "ACTVT".
4.Use user-exit and call the the function module "AUTHORITY-CHECK".
Let me know if you are able to resolve the requirement now.
Regards,
SARTHAK

Authorization for Delivering Plant in Sales Order

Dear All:
We need to set up authorization for a user based on 'delivering plant' in Sales Order registration (VA01). It appears there is no standard available for this.
Can you kindly help by giving hints to achieve this?
Regards,
K. Dwarakanath

Hi,
1. You can create a custom authorization object (via SU21 or equivalent); add field 'ACTVT' with permissible values '01', '02', '03'.
2. In form USEREXIT_CHECK_VBAP of include MV45AFZB, you can call the function module AUTHORITY_CHECK, to check the authorization and throw an error.
This user exit is triggered everytime a user makes any change to item level, i.e. applicable for change of plant too. The call for authority check can be based on whether plant is changed or not. I guess *VBAP and VBAP can be compared to check whether plant is changed. If *VBAP-WERKS is not equal to VBAP-WERKS, then call authority check FM by passing username, custom object name, FIELD1 = 'ACTVT', VALUE1 = 01 or 02. If exception returned by FM is USER_NOT_AUTHORIZED, you can throw an error message.
Cheers,
KC

Sales order number based on delivering Plant.

Hello,
I have a requirement where in , it is expected that SO nr should be based on the delivering plant. In other words number range should be based on delivering plant. Has any one come across such a requirement and if yes how was this requirement met?
thanks in advance
Best Regards
Shripad

Hi Shripad,
For this Use the User Exit "MV45AFZZ" and Include Program " FORM USEREXIT_NUMBER_RANGE " OR SAVE_Document_ PrePare" Any one of the above which suits the requirement
Ask ABAPer to change the Code Accordingly. Give the Functional Specifications
to the ABAPer that Specs need to map the requirement .
Ask him to develop one table that holds Sales Document Type, Delivering Plant. and other Requirement Specific.
and he will call the table in the user exit when the Sales Document is going to Save.
Reward If Helpful...
Regards..
Praveen.D

For LUMF - BOM, Plant field in Sales Order should be editable for TAP

Dear Gurus,
I have the following requirement.
Requirement...
TheComponent level BOM (LUMF) should be exploded in sales order with one by default plant when iI enter the main component in Sales order but if I want to change the plant of main item manually system should allow me in order change mode. And this changed plant to be determined automatically for all the components of that BOM.
As we know if we maintain the BOM at component level we will use the Itm Catg Grp "LUMF" so the pricing will be determined on the component level.
In CS01 we maintain the BOM for a main item. I have followed the same process in CS01 by entering Main Item material, Plant and BOM usage (5). whenever i enter the main item in sales order it explodes correctly with components, quantity and Plant.
The Plant field for main item (TAP itm Catg) becomes gray. But now my query is that if I want to change the plant of main item system is not allowing me as I have created BOM for a specific Plant. Same Bom I have maintained with other plants also
I know that We have one more option in CS01 like we can create a BOM without entering Plant also. But before I doing it for trial and error I want to know whether it will work for my latest requirement.
And what is the Group BOM ? how to use it? will it be helpful me in this requirement?
Please help me for the issue, I need to configure it as soon as possible.
regards,
Vojas

Dear Kapil,
Thanks for your suggestion i followed it also but yet I am facing the same problem.
I did as follows
I extended the Main item and components to the different plants.
And also created the same BOM for different plants in CS01.
After doing this if I create a Sales order and enter the Main Item with quantity system asks me for the Plant to explore the BOM, as i enter a plant BOM get explodes and the plant for main item becomes gray which i dont want. Any how I want the this plant field for main item in editable mode.
Let me explain my requirement in short
I maintain the LUMF BOM (Pricing at component level) .
once I enter the BOM material with quantity system should explode the bom with one plant by default. and in change mode of sales order the Plant for main item should be editable instead of gray mode. Becoz decision can be changed later on the delivering plant location.
Please suggest me. Its a high priority issue for me.
regards,
Vojas

Intercompany Billing and Delivering Plant

Hi,
I had selected a delivering plant for my intercompany billing, that was different from the one previously assigned to my sales organisation and company code. However, even after cancelling those assignments, I still cannot use my original plant to process sales orders.
I keep getting the error message" enter a valid delivering plant"
Could you tell me how to resolve this issue and oblige?
Regards,
Aditya

Hi,
check whther the assignemnt for intecompany settings. The Delivering plant should be asigned to the ordering Sales org and distribution channel combination.
Prasanth

Deliver Plant on Item overview tab of VA01, VA02, & VA03

Hello -
We have an issue when we create a sales order, the field RV45A-DWERK found in the header section of the Item Overview tab is not populated. The ship-to partner has a deliverying plant setup on the customer master.
Once we start entering material on the sales order the item plant field VBAP-WERKS is populated with the delivering plant from either the material master, customer info rec, or the ship-to customer master.
We would like to have the deliver plant at the header section populate with the deliver plant to start with.
We are currently on ECC6 SP4.
Thanks,
Matthew Fee

Dear all,
I came across this thread because I had the exact same requirement.
I was able to implement this requirement in two different ways:
1. Populating VBAP-WERKS in user exit MV45AFZB
FORM USEREXIT_SOURCE_DETERMINATION
*>>>MET@ROFF 11.12.2012 - Set VBAP-WERKS based on user parameter
* DATA: lv_param_value LIKE USR05-PARID.
* DATA: lv_werks LIKE VBAP-WERKS.
* DATA: lv_werks_aux LIKE VBAP-WERKS.
** Clear value
* CLEAR: lv_param_value, lv_werks, lv_werks_aux.
** Get parameter from user data
* SELECT SINGLE parva INTO lv_param_value FROM usr05
*         WHERE bname = sy-uname
*         AND   parid = 'WRK'.
* lv_werks = lv_param_value.
* SELECT SINGLE werks INTO lv_werks_aux FROM t001w
*         WHERE WERKS EQ lv_werks.
* if sy-subrc = 0.
*    VBAP-WERKS = lv_werks.
* endif.
**<<<MET@ROFF 11.12.2012
2. Populating RV45A-DWERK in user exit MV45AFZZ (Better solution)
    FORM USEREXIT_MOVE_FIELD_TO_VBAK
*>>>MET@ROFF 11.12.2012 - Set RV45A-DWERK based on user parameter
   break rf-mteixeira.
   IF svbak-tabix = 0. "Create header
     DATA: lv_param_value LIKE usr05-parid.
     DATA: lv_werks LIKE vbap-werks.
     DATA: lv_werks_aux LIKE vbap-werks.
* Clear value
     CLEAR: lv_param_value, lv_werks, lv_werks_aux.
* Get parameter from user data
     SELECT SINGLE parva INTO lv_param_value FROM usr05
            WHERE bname = sy-uname
            AND   parid = 'WRK'.
     lv_werks = lv_param_value.
     SELECT SINGLE werks INTO lv_werks_aux FROM t001w
            WHERE werks EQ lv_werks.
     IF sy-subrc = 0.
       rv45a-dwerk = lv_werks.
     ENDIF.
   ENDIF.
*<<<MET@ROFF 11.12.2012
I hope this may help other consultants in the future.
Regards,
Moisés Edgar Teixeira

Delivering plant different in freegoods order

Similar Messages

Maybe you are looking for