Delivering Plant not visible

Hi Friends
I an unable ti understand why the delivering plant is not visible in the delivering plant field in a sales order. I have maintained the delivering plant in customer master but when i create the sales order the plant is visible at the item level but not at the header leve(on the front screen of sales order next to req. delivery date)
Can some one please help me with the solution.
Regards,
Wasim.

Hi Vishal,
Thanks for your feedback. My issue is when you are making a sales order using VA01 on the first screen itself there is the field of delivering plant in the middle of the screen next to the required delivery date. This field is different than the plant field at item level.
I want to populate this field with the delivering plant. But when I enter the plant in this field it is not getting saved. What could be the problem and the possible solution.
Plz help, its very critical.
Regards,
Wasim.

Similar Messages

Plant not visible in PR and PO

Dear All
I have defined new Plant and the same is showing when I create Quotation.However when I am trying to create PR or PO it is not showing in Purchase Requisition or Purchase Order.
Any reason for this?

Dear All
The issue was due to factory calendar incorrectly defined.I removed the assignment and it started working.I am yet to analyze what went wromg with factory calendar definition ,once I get to know I will update the thread for everybody's reference
Thanks all for the replies.
Regards
Vaibhav Mahajan

Country of Delivering Plant is not showing in Sales Order Pricing Analysis

Hello All,
I have created a new condition table with the field Country of Delivering Plant (KOMK-WKCOU).
But in the sales order pricing analysis this field is not fetching the country of the plant (it is showing the Yellow color exclamation icon).
This is a standard field, I am not able to understand why it is not fetching this field.
I have used the same field for tax condtions in my previous projects as well, there it worked well.
Even I have activated the KOMK structure in SE11 also, but still the same problem.
Can anybody tell me how to resolve this issue.
Thanks & Regards,
Sreehari.

Rightly suggested by Shiva.
As plant determines at item level.
So, instead of KOMK-WKCOU, field should append in KOMP.
FYI, for checking any inconsistency in condition table, you can use TCode VK+C.
Regards
JP

NOT VALID DELIVERING PLANT

Hi,
When i am entering the PLANT while trying to create a sales order, using the same customer for SP and SH,system is giving a message that delivering plant is not valid and the customer for the delivering plant is the same as the SOLD TO PARTY.But while creating customer master I ve assigned this plant as the delivering plant
plz help to solve
thanks,
smita

Hi,
Just to elaborate a bit on the neterprise stru assignment
Check the sales area that you are using to create a sales order.
Check if the sales area is assigned properly to the Credit Control area.
Check if the Delivering plant is assigned to the cos code.
Check if the sales org is assigned properly to the Cos code.
Check if the sales org and distribution channel is assigned to the plant.
Check if the Distribution channel is assigned to the sales org
Check if the Division is assigned to the sales org
Then create the material for the sales area and plant. or extend it for that plant by using MM50.
Lastly create a customer in the cos code and for the specific sales area.
If you do each step systematically then you wont face any probs.
Edited by: Christino Ronaldo on Aug 6, 2008 11:38 AM

How to update the Delivering plant in sales order

Hi Guru's
I have a scenario where the delivering plant(RV45A-DWERK) in the sales order overview is not updated.
I have maintained the VD51 customer info record
in customer master and also in material master.
Even if i update manually in the sales order and then save it is not updating
when i got va02 and check it is blank
regards
sphoorthi

***Hi,***
***As replied by many ,Plant is determined from CMIR/MATEIRIAL MASTER/CUSTOMER MASTER.***
***First check by maintaining plant in CMIR and check whether it is determined in SALES ORDER?***
***Before that check in VOV8 in document type check the field "Read inford record",***
***then check by maintaining plant in Customer master,and check if determined in SALES ORDER?***
***then check by maintaining plant in material master and check if deterimined in SALES ORDER?***
***If still ,problem then u can check the user exits,***
***Thanks***
***Jai***

Delivering plant on sales orders

Hello
I know that if I access to transaction XD02 under Sales Area Data on Shipping tab, I can set the Delivery Plant field, in order to take it automatically when I create a new sales order for that client, but, I am able to change it, does anyone know a way to lock it in order to no one could change it at sales order?
Thank you in advance
Regards

I saw that I was able to change it on the sales order,
Sorry by oversight, I have not seen this comments. To achieve this requirement in sale order, I am not sure whether your requirement is at header level or item level. If I am correct, for header level delivering plant, the object name is C_AFKO_AWK which you have to change this field to display with the help of your basis team.
thanks
G. Lakshmipathi

Plant not taking in purchase order

Hi Frnds,
I got a problem while raising PO.
In ME21N, after entering all the details, the plant is not taking up even i enter the plant.
I have 8 plants and out of that if i press F4, only 2 plants are visible. I have checked in OMS@ for qty and value update and its ok..
Kindly help me frnds..
Thanks in advance.
Prabhu
Note : Please search ERP MM forum before posting.
Edited by: Jeyakanthan A on Jun 7, 2011 5:31 PM

Hi
check this
1) check company code and purchsing organization at header level in Po on Purch.Org tab
2) check you have assigen all plant to your company code in t-code OX18
3) check your material inMM60 you defien for your plant or not
Regards
Kailas ugale

VA01 - Plant not showing in Sales Order view

Dear Gurus,
I want to create a sales order and have selected a SP + 1 Item.
The plant has been maintained both in the Customer and the Material MD
Why then is it not showing in the plant'/s table field: RV45A
If I enter the plant manually: TCSP, the system sends me the following message of error:"The delivering plant will not be copied into the existing items".
What does that mean?
Please help.
Regards
Chris

Hi Palani,
Yes I have maintained it and it shows. As I said, I maintained the plant in the customer and the material master data.
So what shall I do to show it into the document header?
Please advise
Kind regards
Chris

How to download Delivering Plant of R/3 Customer Master in CRM BP

Hi,
We have successfully downloaded the Plants from ECC to CRM using the object DNL_PLANT which has successfully created BP's for PLants in CRM with BP Role=Plant and have updated the mapping in table CRMM_LOCMAP.
Now I want that the Delivering Plant mantained in ECC Customer Master Data (XD02 -> Sales Area Data -> Shipping Tab -> Delivering Plant Field) to be updated in the CRM Business Partners as BP Relationship.
The BP(Customer BP) should be updated as a BP Relationship "ZPLANT - Has Plant" with BP(BP of the Plant in CRM). This is not happening.
Can you please tell me the Steps to be performed in both CRM and ECC side to bring the ECC Delivering PLant as Relationship in CRM ?
Is the Delivering Plant change in ECC Customer Master Data does not gets captured in the BUPA_MAIN BDoc ?
When we change the Delivering Plant in ECC Customer Master Data, a BUPA_MAIN Bdoc gets triggered but when we look into the Bdoc we can not find the changed information of the Delivering Plant. I am not usre if this behaviour is right or not.
There is an OSS Note - 493947 which is quite old and talks about creating a Customer each for all the Plants in ECC and creating a Partner Function for Plant in the Customer Master Data. I am not sure if this process is still to be followed Or SAP has given some stadard settings to bring ECC Delivering Plant mantained in Customer Master to CRM.

To my knowledge oss note 493947 is still relevant
Edited by: Anders Brock-Faber on Apr 6, 2009 1:06 PM

The stock in transit field is not visible in MD04

Hi Team
Stock in transit visible on MD04
STPO 28801084 is internal stock transfer from FI25 to FI28.
Qty of PO is visible in the ´stock in transit´ field on SAO transaction MD04 under plant FI28
when corresponding delivery 1202400481 have been PGId at FI25 (2014/07/07)
Stock in transit NOT visible on MD04
STPO 28502250 is internal stock transfer from FI31 to FI28.
The ´stock in transit´ Qty of PO is not visible on MD04 under plant FI28.
even if the corresponding   delivery 1202323564 have been PGId at FI31 (2014/06/23)
Br, Kiran Unde

Hello
Please take a look on question 9 of the following FAQ note, which explains the standard system behavior:
549752 - FAQ: MRP elements in transaction MD04/MD05
9. Question: Why does the system not display stock in transit for stock
    transport orders with order confirmation (notified orders)?
    Answer:
    Purchase order confirmations do not have to match the original
    purchase order delivery schedule lines. Moreover, the purchase order
    confirmation (view MDLA in materials planning) does not contain the
    same information as the purchase order to determine the stock in
    transit. The display of the stock in transit is therefore not
    implemented for the purchase order confirmation in the materials
    planning evaluation transactions.
BR
Caetano

Regarding : Delivering Plant Creation

How to create a new delivering plant in SD?
This value , we want to use while creating the a new customer , in the sales area data section.

Dear Mukesh,
Plants are getting created in to MM-Module
Path: SPRO --> IMG --> Enterprise Structure --> Definition --> Logistics-General --> Define, copy, delete, check plant --> Define plant
and are assigned to
1. Company Code (In Logistic-General)
Path: SPRO --> IMG --> Enterprise Structure --> Assignment --> Logistics-General --> Assign Plant to Company Code
NOTE: Alternatively, you may use, T. Code: OX18
AND
2. Sales Org + Dist. Channel ( In Sales and Distributioin)
Path: SPRO --> IMG --> Enterprise Structure --> Assignment --> Sales and Distribution --> Assign Sales Org -- Dist. Channel - Plant
You may also view Structure: Plant -> Sales Org./ Dist. Channel: Overview in T. Code: OVX6
Hope, this may help you.
Best Regards,
Amit

Deliver Plant on Item overview tab of VA01, VA02, & VA03

Hello -
We have an issue when we create a sales order, the field RV45A-DWERK found in the header section of the Item Overview tab is not populated. The ship-to partner has a deliverying plant setup on the customer master.
Once we start entering material on the sales order the item plant field VBAP-WERKS is populated with the delivering plant from either the material master, customer info rec, or the ship-to customer master.
We would like to have the deliver plant at the header section populate with the deliver plant to start with.
We are currently on ECC6 SP4.
Thanks,
Matthew Fee

Dear all,
I came across this thread because I had the exact same requirement.
I was able to implement this requirement in two different ways:
1. Populating VBAP-WERKS in user exit MV45AFZB
FORM USEREXIT_SOURCE_DETERMINATION
*>>>MET@ROFF 11.12.2012 - Set VBAP-WERKS based on user parameter
* DATA: lv_param_value LIKE USR05-PARID.
* DATA: lv_werks LIKE VBAP-WERKS.
* DATA: lv_werks_aux LIKE VBAP-WERKS.
** Clear value
* CLEAR: lv_param_value, lv_werks, lv_werks_aux.
** Get parameter from user data
* SELECT SINGLE parva INTO lv_param_value FROM usr05
*         WHERE bname = sy-uname
*         AND   parid = 'WRK'.
* lv_werks = lv_param_value.
* SELECT SINGLE werks INTO lv_werks_aux FROM t001w
*         WHERE WERKS EQ lv_werks.
* if sy-subrc = 0.
*    VBAP-WERKS = lv_werks.
* endif.
**<<<MET@ROFF 11.12.2012
2. Populating RV45A-DWERK in user exit MV45AFZZ (Better solution)
    FORM USEREXIT_MOVE_FIELD_TO_VBAK
*>>>MET@ROFF 11.12.2012 - Set RV45A-DWERK based on user parameter
   break rf-mteixeira.
   IF svbak-tabix = 0. "Create header
     DATA: lv_param_value LIKE usr05-parid.
     DATA: lv_werks LIKE vbap-werks.
     DATA: lv_werks_aux LIKE vbap-werks.
* Clear value
     CLEAR: lv_param_value, lv_werks, lv_werks_aux.
* Get parameter from user data
     SELECT SINGLE parva INTO lv_param_value FROM usr05
            WHERE bname = sy-uname
            AND   parid = 'WRK'.
     lv_werks = lv_param_value.
     SELECT SINGLE werks INTO lv_werks_aux FROM t001w
            WHERE werks EQ lv_werks.
     IF sy-subrc = 0.
       rv45a-dwerk = lv_werks.
     ENDIF.
   ENDIF.
*<<<MET@ROFF 11.12.2012
I hope this may help other consultants in the future.
Regards,
Moisés Edgar Teixeira

How can i show delivering plant in credit memo request

hi gurus,
why is the delivering plant field under the sales tab in VA01 is hidden for order type CR and DR? how can i unhide that field?
thanks,
paul

Dear John
Delivering plant for these documents is not necessary bcoz while creating these documents, you would be referencing a preceding document in which already the delivering plant will be there.
thanks
G. Lakshmipathi

After creation producton order long text not visible inCO03

Hi
while creating production order with co01 i entered long text in longtext tab of the production order
after that in display mode co03 that long text is not visilbe. tell me why and what are the setting required.
thanks
RAVI

when i am creating production order
i enter materil, plant, order type
after that in producto header screen
i enter total quantiy 1 and scheduling type current date in genaral tab
after that i go to long text tab i enterd long text and i saved the order
then i check in co03 the long text in entered not visible.
i am in single tc code that time co01
thanks
ravi

Delivering Plant In CRM Order

Hi,
I need SAP CRM Field delivering plant.
Does Anyone know how I can get this field from sales order CRMD_BUS000115.
I need it for a condition pricing.
Thank you
Lidisaid

Dear friend,
I had lots of problem with PLANTs in CRM because the only information about that it is stored in the table CRMM_LOCMAP (access with SM30 ). If the table is empty you need to download object DNL_PLANT.
In this table there is only a BP id in CRM that represent the Plant, and their ids in ECC or R/3 system.
In this subject CRM behaving different, because in ECC or R/3 there is a specific place to store Plants details, for CRM plants are Business Partners.
In the sales document CRM fill at the partner procedure a partner type Plant with the BP id that represent the Plant, and then, through the middleware this information arrive in ECC or R/3, and in the back end system all necessary processing for Plant happening. The execution to transform a BP in CRM in the Plant in ECC system the moust part it is hard code in the middleware, so it is impossible to change this behaving.
In my previous project I sent a message to SAP support complaning about the different behaving and information about Plant in CRM and ECC system, and SAP answered me that, for SAP vision, Plant it is not relevant for CRM process (front end).
So, if you need to create a new condition based on Plant information, in CRM could be impossible.
In my case, the solution was, sales order that needed information about Plant I create in CRM through BOR conection, so in fact, the order was create in ECC system with a link in CRM.
Good luck,
Lalas

Delivering Plant not visible

Similar Messages

Maybe you are looking for