Delivers: iBots failing with message "No devices for user: "

All,
My iBots were working fine until Sunday morning when they started failing with the message;
+++ ThreadID: 1e0c : 2011-05-02 11:42:31.096
iBotID: /XXX/XXXX/XXXX
No devices for user: XXXXXXXXX (starred for anonymity)
I have my users set up with e-mails in the SA System tables and nothing has chanced - the ibots were delivering fine on Satuday night and failing on Sunday morning. During that time there were no configuration changes.
Can anyone please shed some light on what's going on here? I have a lot of extremely frustrated business users wondering where their reports are!
Thanks :)

Update: I have found that for some reason, no user has an Active Delivery profile any more. Under "Delivery Options" of "My Account" it's blank.
Why would this change, and how do I add this info back in for all my users?

Similar Messages

Hi, I've been trying for days to download Windows support software via Bootcamp assistant, but it always failed with message 'Can't install Windows Support Software because it is not currently available from the Software update server.' Any advice welcome

Hi,
I've been trying for days to download Windows support software via Bootcamp assistant but it always fails with message 'Can't install windows software because it is not currently available from the software update server.'
Anyone else had problems or success with this?
Thanks in advance.

9thdoc wrote:
I'm getting a similar but distinct error message in snow leopard: Download could not continue. "The windows support software is not available" and have no original snow leopard instal disc with me.
Your issue is completely different. You are running Snow Leopard. There is no download for Windows Support software for Snow Leopard, hence the error you see. Snow Leopard Windows Support software is on the Snow Leopard installation disk.
You need the Snow Leopard installation disk or a replacement for it.

RFC logon failed with message: Failed: Connect to SAP gateway failed

I installed CI instance fine and i am stopped here with this error at the end of DB instance install. Could someone let me know what could be the reason for this. Is there any fix or workaround to continue the install.
INFO       2006-09-16 01:13:02 [iaxxrfcimp.cpp:398]
          CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value hostSAP.
INFO       2006-09-16 01:13:02 [iaxxrfcimp.cpp:398]
          CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 09.
INFO       2006-09-16 01:13:02 [iaxxrfcimp.cpp:543]
          CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
ERROR      2006-09-16 01:13:02 [iaxxrfcimp.cpp:450]
          CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
ERROR      2006-09-16 01:13:02
          CJSlibModule::writeError_impl()
FRF-00063 RFC logon failed with message: Failed: Connect to SAP gateway failed
Connect_PM GWHOST=hostSAP, GWSERV=sapgw09, ASHOST=hostSAP, SYSNR=09
LOCATION    CPIC (TCP/IP) on local host
ERROR       partner not reached (host hostSAP, service 3309)
TIME        Sat Sep 16 01:13:02 2006
RELEASE     640
COMPONENT   NI (network interface)
VERSION     37
RC          -10
MODULE      nixxi_r_mt.cpp
LINE        8528
DETAIL      NiPConnect
SYSTEM CALL connect
ERRNO       146
ERRNO TEXT Connection refused
COUNTER     4
Thanks,
Ram

at the end of the database instance installation SAPInst is doing some RFCs to the CI.
The logfile states that the gateway on host hostSAP with the systemnumber 09 is not reachable.
Please check if you have started the central instance on this machine.
peter

FRF-00063 RFC logon failed with message: Failed: Connect to SAP gateway fa

We are getting below error while installing CRM 4.1 on oralce,sunsolaris.
ERROR      2007-09-27 01:19:46
           CJSlibModule::writeError_impl()
FRF-00063 RFC logon failed with message: Failed: Connect to SAP gateway failed
Connect_PM GWHOST=uapkb2dh, GWSERV=sapgw29, ASHOST=uapkb2dh, SYSNR=29
LOCATION    CPIC (TCP/IP) on local host
ERROR       partner not reached (host uapkb2dh, service 3329)
TIME        Thu Sep 27 01:19:46 2007
RELEASE     640
COMPONENT   NI (network interface)
VERSION     37
RC          -10
MODULE      nixxi_r_mt.cpp
LINE        8642
DETAIL      NiPConnect
SYSTEM CALL connect
ERRNO       146
ERRNO TEXT Connection refused
COUNTER     2
Regards,
Madhu.

We are getting below error while installing CRM 4.1 on oralce,sunsolaris.
ERROR      2007-09-27 01:19:46
           CJSlibModule::writeError_impl()
FRF-00063 RFC logon failed with message: Failed: Connect to SAP gateway failed
Connect_PM GWHOST=uapkb2dh, GWSERV=sapgw29, ASHOST=uapkb2dh, SYSNR=29
LOCATION    CPIC (TCP/IP) on local host
ERROR       partner not reached (host uapkb2dh, service 3329)
TIME        Thu Sep 27 01:19:46 2007
RELEASE     640
COMPONENT   NI (network interface)
VERSION     37
RC          -10
MODULE      nixxi_r_mt.cpp
LINE        8642
DETAIL      NiPConnect
SYSTEM CALL connect
ERRNO       146
ERRNO TEXT Connection refused
COUNTER     2
Regards,
Madhu.

Failed to activate authorization check for user SAPSYS

Hi Experts
I am trying to run the sdcc, it was throwing time_out error. i have increased the work process runtime. now
i am getting a error Failed to activate authorization check for user SAPSYS.
Please help me to solve this issue.
Regards
Venkat

Hi, Mr. Joe Bo.
Thanx for your reply. We are using ECC6 (HP Unix with Oracle)
Basis Patch - 15, Kernel 159
I have seen the the note but it's showing ccms method defination settings, but for my case we are yet to go live we have not made any settings from sap they are planning to run a session for the go live. When i am running sdcc i am getting a error in the system log "Failed to activate authorization check for user SAPSYS"
Thanks & Regards
Venkatesan J

Failed to reconcile provision object for User

Hi,
I am doing RACF reconciliation for users.
But reconcilaition events are in Event Received state.
If I try to reapply th recon matching rule.
Exception is Failed to reconcile provision object for User.
any pointer?

Once Verify reconsilation Data, specially which are mandatory for User.

Lucreate fails with: Root slice device ... for BE ... is not a block device

Hi,
I'm running lucreate on a Sol10u7 x86 system as I wanted to get it to u8 level. I installed:
SUNWlucfg
SUNWlur
SUNWluu
from u8 and then a patch: 121431-58
System is not zoned and it is on ZFS with following pools:
pool: rpool
state: ONLINE
scrub: none requested
config:
NAME STATE READ WRITE CKSUM
rpool ONLINE 0 0 0
c1t0d0s0 ONLINE 0 0 0
errors: No known data errors
pool: spool
state: ONLINE
scrub: none requested
config:
NAME STATE READ WRITE CKSUM
spool ONLINE 0 0 0
c0t0d0 ONLINE 0 0 0
This is what happens:
Creating Alternative Boot Environment..
lucreate -n s10x_u8
Checking GRUB menu...
Analyzing system configuration.
No name for current boot environment.
INFORMATION: The current boot environment is not named - assigning name <s10x_u7wos_08>.
Current boot environment is named <s10x_u7wos_08>.
Creating initial configuration for primary boot environment <s10x_u7wos_08>.
The device </dev/dsk/c1t0d0s0> is not a root device for any boot environment; cannot get BE ID.
PBE configuration successful: PBE name <s10x_u7wos_08> PBE Boot Device </dev/dsk/c1t0d0s0>.
Comparing source boot environment <s10x_u7wos_08> file systems with the
file system(s) you specified for the new boot environment. Determining
which file systems should be in the new boot environment.
Updating boot environment description database on all BEs.
Updating system configuration files.
Creating configuration for boot environment <s10x_u8>.
Source boot environment is <s10x_u7wos_08>.
Creating boot environment <s10x_u8>.
Cloning file systems from boot environment <s10x_u7wos_08> to create boot environment <s10x_u8>.
Creating snapshot for <rpool/ROOT/s10x_u7wos_08> on <rpool/ROOT/s10x_u7wos_08@s10x_u8>.
Creating clone for <rpool/ROOT/s10x_u7wos_08@s10x_u8> on <rpool/ROOT/s10x_u8>.
Setting canmount=noauto for </> in zone <global> on <rpool/ROOT/s10x_u8>.
Creating snapshot for <rpool/ROOT/s10x_u7wos_08/var> on <rpool/ROOT/s10x_u7wos_08/var@s10x_u8>.
Creating clone for <rpool/ROOT/s10x_u7wos_08/var@s10x_u8> on <rpool/ROOT/s10x_u8/var>.
Setting canmount=noauto for </var> in zone <global> on <rpool/ROOT/s10x_u8/var>.
ERROR: Root slice device </dev/dsk/c1t0d0s0> for BE <s10x_u8> is not a block device: .
ERROR: Cannot make file systems for boot environment <s10x_u8>.
Please help,
Cheers,
Tom

devfsadm fixed the issue,

Set-AzureServiceDiagnosticsExtension or publishing with diagnostitcs enabled fails with Azure SDK2.5 for existing Azure services

Similar to https://social.technet.microsoft.com/Forums/systemcenter/en-US/487234f4-9748-4f49-ab7b-ce523da4c500/publish-cloud-service-fails-from-visual-studio-2013-update-4-published-asset-entry-for-image but since the given answer provides no solution
and I found more details, I felt that opening this new question providing more details was necessary.
I have an existing Azure service with two web roles (service and worker) published first in May 2012. Recently I tried to update from SDK2.2 to SDK2.5 and Visual Studio 2013 Update 2 to Update 4. The main reason behind this was to move from log4net to WAD
and in doing so, of course directly move to the new diagnostics version. So before publishing I enabled WAD diagnostics logging in the properties of both roles.
Trying to publish from Visual Studio to the exisiting Azure Service fails, VS output shows the following lines:
11:45:24 - Checking for Remote Desktop certificate...
11:45:25 - Applying Diagnostics extension.
11:45:45 - Published Asset Entry for Image Microsoft.Azure.Diagnostics_PaaSDiagnostics_europeall_manifest.xml not found.
What's working 1: For testing purposes, I have created a new Azure service in the Azure portal.
Publishing the same solution from the same development environment to this new service is possible without problems - the service with WAD diagnostics logging is working fine. Unfortunately this is no solution to my production service, with
DNS alias and SSL certificates bound to the existing Azure service.
What's working 2: Publishing the solution to the existing Azure service WITHOUT diagnositics enabled works.
Problem with that: Trying to activate WAD diagnostics logging after publishing using the Azure cmdlets also fails WiTH a similar error message. Following http://blogs.msdn.com/b/kwill/archive/2014/12/02/windows-azure-diagnostics-upgrading-from-azure-sdk-2-4-to-azure-sdk-2-5.aspx I
tried:
PS C:\> Set-AzureServiceDiagnosticsExtension -StorageContext $storageContext -DiagnosticsConfigurationPath $public_config -ServiceName $service_name -Slot 'Staging' -Role $role_name
VERBOSE: Setting PaaSDiagnostics configuration for MyWebRole.
Set-AzureServiceDiagnosticsExtension : BadRequest : Published Asset Entry for Image
Microsoft.Azure.Diagnostics_PaaSDiagnostics_europeall_manifest.xml not found.
At line:1 char:1
+ Set-AzureServiceDiagnosticsExtension -StorageContext $storageContext -Diagnostic ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Set-AzureServiceDiagnosticsExtension], CloudException
+ FullyQualifiedErrorId : Microsoft.WindowsAzure.CloudException,Microsoft.WindowsAzure.Commands.ServiceManagement.
Extensions.SetAzureServiceDiagnosticsExtensionCommand
The problem seems to be related to those service configuration parts in the cloud which are not replaced by a new deployment, so I compared both services using Azure cmdlet Get-AzureService.
I found that the new service has properties which the old one is missing:
ExtendedProperties : {[ResourceGroup, myazureservice], [ResourceLocation, North Europe]}
Is this a hint? Reinstalling or repairing Visual Studio is not the answer to this problem!!!
What's the meaning of "Published Asset Entry for Image Microsoft.Azure.Diagnostics_PaaSDiagnostics_europeall_manifest.xml"?
[Perhaps MS will publish a newer version of its Azure cmdlets, but that's not today's story]
So what are possible reasons or fixes for this behaviour? Going back to log4net is not my favorite. Even worse, while there are alternative logging solution,
I currently have no performance counter monitoring in the Azure portal (Remote desktop and perfmon is NO solution). Is there any alternative to going back to SDK2.4?
Best regards,
Andreas

Hi Andreas,
Thanks for your feedback.
I will test and reproduce your issue on my side. Any information, I will post back for you.
Thanks for your understanding.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Transport fails with return code 12 for 0CHANOTASSIGNED Characteristics

Dear Experts,
I am transporting the 0CHANOTASSIGNED characteristics from BI Dev to BI QA.
In BI Dev, I use the option Necessary Object.
While importing request into BI QA, it fails with a return code 12. Some of the errors are:
Start of the after-import method RS_IOBJ_AFTER_IMPORT for object type(s) IOBJ (Activation Mode)
System error in lock management
Error AD 025 during after import handling of objects with type(s) IOBJ
Start of the after-import method RS_IOBC_AFTER_IMPORT for object type(s) IOBC (Activation Mode)
Error when checking the InfoObjectCatalog 0CHANOTASSIGNED
InfoObject 0ABCINDIC is not available in active version
InfoObject 0ABCPRC_TYP is not available in active version
InfoObject 0ABCPROCESS is not available in active version
InfoObject 0ACCT_TYPE is not available in active version
InfoObject 0ACTIONREAS is not available in active version
This goes on for lot of infoobjects. If I were to goto RSA1 of BI QA and check any of the above objects, they are 'INACTIVE'.
But they are 'ACTIVE' in BI Dev.
Please help me in resolving this issue.
Thanks and BR,
Raj Jain

Hi I.R.K,
I recreated a trasnport for just one Infoobject (0ABCINDIC) which was one of the objects not active as shown in the logs of BI QA while transport.
I did not make any changes or delete any data etc. I then just transported these request from BI Dev to BI QA.
The transport was successful with return code 0. I then checked this object in RSD1 of BI QA and it was activated.
Any ideas what may be the cause???
Thanks,
Raj Jain

Mac OS X 10.7 drivers for HP LaserJet 1300: installation at the "Add Printer" process ended, every time, with message "Currently drivers for this printer are UNavailable..."! PLEASE HELP?

APPLE [see Apple Support's Article HT 3669] says Mac OS X 10.7 (Lion) has drivers for this Printer.
But, every time I've tried installing it to my Mac Book Pro (which came with OS X 10.7), it does recognize that the Printer (connected via USB cable) is HP LaserJet 1300 -- in fact, right below, this statement appears: "The drivers for this Printer are available...". But, when it comes to the actual process of downloading, the "Add Printer" window -- after 20+ minutes of its "searching" for the drivers -- always ends with the message: "Currently drivers for this printer are UNavailable... contact the manufacturer."!!! (Can you imagine? Apple says it's available... but its own "Add Printer" process says it's UNavailable!)
I went to HP's support site, and it, too, says that drivers for this Printer are available! -- see the 2 links:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01664444&lc=en&cc=us&dlc=en &product=4152639
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02915680&tmp_track_link=ot_ faqs/top_issues/en_us/c02915680/loc:4&cc=us&dlc=en&lc=en&product=4152639#N507
Can somebody help me? Would very much appreciate it.

You haven't installed any of the Photoshop updates for CS5.
Go download and install the updates.

Update trigger fails with value too large for column error on timestamp

Hello there,
I've got a problem with several update triggers. I've several triggers monitoring a set of tables.
Upon each update the updated data is compared with the current values in the table columns.
If different values are detected the update timestamp is set with the current_timestamp. That
way we have a timestamp that reflects real changes in relevant data. I attached an example for
that kind of trigger below. The triggers on each monitored table only differ in the columns that
are compared.
CREATE OR REPLACE TRIGGER T_ava01_obj_cont
BEFORE UPDATE on ava01_obj_cont
FOR EACH ROW
DECLARE
v_changed boolean := false;
BEGIN
IF NOT v_changed THEN
    v_changed := (:old.cr_adv_id IS NULL AND :new.cr_adv_id IS NOT NULL) OR
                 (:old.cr_adv_id IS NOT NULL AND :new.cr_adv_id IS NULL)OR
                 (:old.cr_adv_id IS NOT NULL AND :new.cr_adv_id IS NOT NULL AND :old.cr_adv_id != :new.cr_adv_id);
END IF;
IF NOT v_changed THEN
    v_changed := (:old.is_euzins_relevant IS NULL AND :new.is_euzins_relevant IS NOT NULL) OR
                 (:old.is_euzins_relevant IS NOT NULL AND :new.is_euzins_relevant IS NULL)OR
                 (:old.is_euzins_relevant IS NOT NULL AND :new.is_euzins_relevant IS NOT NULL AND :old.is_euzins_relevant != :new.is_euzins_relevant);
END IF;
[.. more values being compared ..]
    IF v_changed THEN
    :new.update_ts := current_timestamp;
END IF;
END T_ava01_obj_cont;Really relevant is the statement
:new.update_ts := current_timestamp;So far so good. The problem is, it works the most of time. Only sometimes it fails with the following error:
SQL state [72000]; error code [12899]; ORA-12899: value too large for column "LGT_CLASS_AVALOQ"."AVA01_OBJ_CONT"."UPDATE_TS"
(actual: 28, maximum: 11)
I can't see how the value systimestamp or current_timestamp (I tried both) should be too large for
a column defined as TIMESTAMP(6). We've got tables where more updates occur then elsewhere.
Thats where the most of the errors pop up. Other tables with fewer updates show errors only
sporadicly or even never. I can't see a kind of error pattern. It's like that every 10.000th update
or less failes.
I was desperate enough to try some language dependend transformation like
IF v_changed THEN
    l_update_date := systimestamp || '';
    select value into l_timestamp_format from nls_database_parameters where parameter = 'NLS_TIMESTAMP_TZ_FORMAT';
    :new.update_ts := to_timestamp_tz(l_update_date, l_timestamp_format);
END IF;to be sure the format is right. It didn't change a thing.
We are using Oracle Version 10.2.0.4.0 Production.
Did anyone encounter that kind of behaviour and solve it? I'm now pretty certain that it has to
be an oracle bug. What is the forum's opinion on that? Would you suggest to file a bug report?
Thanks in advance for your help.
Kind regards
Jan

Could you please edit your post and use formatting and tags. This is pretty much unreadable and the forum boogered up some of your code.
Instructions are here: http://forums.oracle.com/forums/help.jspa

DB installs fails with [INS-30060] Check for group existence failed

Hi folks
as user jjayet I'm running on OEL 5.6 64 bits the following command to install DB 11gR2 :
$ /mntmats/SOAVM0504/AUTO_WORK/dbzip_shiphome/database/Disk1/runInstaller -ignoreSysPrereqs -invPtrLoc /ade/jjayet_dte9672/oracle/work/DATABASE1/oraInst.loc -force -silent -waitforcompletion -responseFile /ade/jjayet_dte9672/oracle/work/DATABASE1/db.rsp
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 120 MB. Actual 15258 MB Passed
Checking swap space: must be greater than 150 MB. Actual 16454 MB Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-04-05_06-07-54AM. Please wait ...[FATAL] [INS-30060] Check for group existence failed.
CAUSE: Unexpected error occurred while trying to check for group existence.
$ id
uid=511053(jjayet) gid=8500(dba) groups=8500(dba),59031(oinstall)
the problems seems relater to accessing /tmp
as the local disk is not enough to use the default /tmp (the DB install will fail with full disk error as the local disk space is very low )
I've created a partition from new disk to /tmp which I have then mounted (default is nfs3) :
# mount /dev/xvdc1 /tmp
# mount
/dev/xvdc1 on /tmp type ext2 (rw)
the result of DB install into /tmp is :
# cd /tmp
# ls -altr
drwxr-xr-x 32 root root 4096 Apr 5 06:07 ..
drwxr-xr-x 2 jjayet dba 4096 Apr 5 06:36 CVU_11.2.0.2.0_jjayet
drwxrwxrwx 7 root root 4096 Apr 5 06:36 .
if I umount /tmp but use the local /tmp
re-running the DB installer as user jjayet it does not raise the error above
and now local /tmp contains :
# cd /tmp
# ls -altr
drwxr-xr-x 32 root root 4096 Apr 5 06:07 ..
drwxr-x--- 10 jjayet dba 4096 Apr 5 06:25 OraInstall2012-04-05_06-25-28AM
drwxr-xr-x 3 jjayet dba 4096 Apr 5 06:25 CVU_11.2.0.2.0_jjayet
drwxrwxrwt 5 root root 4096 Apr 5 06:25 .
do you know how to use tmp over nfs with user jjayet so that the DB can install properly ?
it seems that the files created as user jjayet into mounted /tmp are not identified properly
thks in advance
jean

thks for the pointer
I found the post you mention but it does not help
it does not explain the root cause of the problem but just propose a workaround to pass an option to installer which will popi\up an interactive messgae at install time
as installation is done automatically through ADE / DTE I cannot use this workaround
any expert in oracle DB install can help ?
thks
Jean

Windows Update of Office 2010 SP2 fails with message Code B56

I have been trying to update a Windows 7 Ultimate + Office 2010 professional with SP2 as supplied both by Windows Update and dowanloaded SP2 from KB2687455.
All attempts fail with a Windows Update error code B56.
I have tried the 'get help with this error' but there is no entry that matches the problem.
I have tracked the event viewer error which is 0x80070643 - this appears to relate to error occurring with .NET, so I am no furrther on.
Help Please from anyone.
Alan Cameron

Thank you for your input. The email prompted me to come back and share what I have been able to do to solve the problem. No answers as to why it worked but what I did was using a dvd with a copy of Office 2010 Professional Plus I started the setup and when
it asked what I wanted to do I answered Repair.
When this was finished I retried the update to SP2 and it worked.
It would be nice to know why it was failing but the pressure is off now.
Alan Cameron

Will apple come out with a iTrip device for nano?

Will apple come out with an iTrip device made for the nano? I just spent 250 on it and I don't want to have to spend another 80 more for the monster cable!!!

If you specifically are referring to the iTrip, it's made by Griffin Technology; you'll have to ask them if they'll be releasing one for the nano.

Blackberry desktop software cannot communicate with the connected device for the playbook

Hey whats up..... I'm new to the playbook and I'm having serious problems trying to connect my playbook with the blackberry desktop software. when i tried connecting it, a small windows popped up, saying "blackberry desktop software cannot communicate with the connected device.............. and if error to update". So i did. I'd already backed up the playbook the day before so it was ok when the small windows said, "all data would be remove and playbook would return to factory settings". I did all the procedures and the blackberry desktop software still wont connect to the playbook. I tried uninstalling the blackberry desktop software and re-installing it, but the same thing keep on showing up. So i cant access my playbook.
Can someone plz help me????????
PS... My Playbook is on OS 2.1.0.1088 and is 16GB
I tried the updating method 5 times now and uninstalling and reinstalling the blackberry desktop software 7 twice. I dont know what else to do, and also Is there another way i cant access the playbook?
Solved!
Go to Solution.

Try this:
http://btsc.webapps.blackberry.com/btsc/viewdocument.do?externalId=KB26904&sliceId=2&cmd=displayKC&d...
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

Delivers: iBots failing with message "No devices for user: "

Similar Messages

Maybe you are looking for