Delivery address of PO is not geting disp in print o/p when it is changed

Hello,
When delivery address is changed at PO line item it is not getting displayed in print output.
Before change it is getting displayed.
Note - system is 4.6C.
Thanks - aadil

Hi,
Why you want delivery address should change once you change storage location in your purchase order?
Universally purchase order considered as committed document by business which provides to vendor with defined delivery conditions such as price, delivery date and delivery condition etc.
Now you need to check/understand – how delivery address designed for your purchase order layout where some times delivery address hard coded in your PO Smartform( refer NACE t.code wwith EF application and find your  purchase order  ouput type assigned to Smartform ) or delivery address picks from plant address which is available in t.code:OX10
Regards,
Biju K

Similar Messages

  • Hello I send imessages to a phone number I receive delivery notice but sms does not show on receiving phone. Otherwise when receive imessage from other phone I reply and receiver sees SMS !!! Any explanation ?

    Hello I send imessages to a phone number I receive delivery notice but sms does not show on receiving phone. Otherwise when receive imessage from other phone I reply and receiver sees SMS !!! Any explanation ?

    To my knowledge, I've only seen this for imessage only and not SMS.
    The other users would need to have send read receipts enabled on their phone.

  • My imessages are gone. i cant activate them now. When i go into send and recieve its only my e-mail address thats ticked and not my phone number ticked also. When i sign in with my apple ID it is ticked there. can anyone help me please.

    my imessages are gone. i cant activate them now. When i go into send and recieve its only my e-mail address thats ticked and not my phone number ticked also. When i sign in with my apple ID it is ticked there. can anyone help me please.

    Hi,
    Go to the iPhone
    GO to Settings > Messages
    Is the iPhone Number ticked to be enabled (It will be greyed out and not editable but should be On)
    If it is Off (Unticked remove the Apple ID)
    Place the iPhone in Airplane mode for a few minutes.
    Go back to Settings Messages and make sure the Message app Is Enabled overall.
    Check the iPhone Number is verifying.
    When Completed test by sending an iMessage to your Apple ID (Mac)
    If that works add back the Apple ID to the iPhone's Settings.
    Restart the Mac App and Accept the op ups that appear as to what the iPhone is using.
    9:52 pm      Friday; April 4, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • TS3297 What can I do I can not to purchase credit on my game when I was change my credit card information....and it said please contact the iTunes support to complete this transaction

    What can I do I can not to purchase credit on my game when I was change my credit card information....and it said please contact the iTunes support to complete this transaction

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • HT204053 i changed my email address (apple id) on my pc, but now my ipad is asking me for my password with the old email address...and not accepting the old or new password.how do i change it/sync it?

    I changed my email address (apple id) and password on my pc, but now my ipad mini icloud is asking me for my  icloud password with the old email address and not accepting the old one or the new one..how do i change it / sync it?

    To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use.  If you don't know the password for your old ID, or if it isn't accepted, and your old ID is an earlier version of your current ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • Photoshop CC not defaulting as first priority "open with" when attempting to change all

    Can anyone help, I have both Photoshop CC and Photoshop CS6, when I go to change all files ending in .psd to Photoshop CC it reverts back to CS6.
    This is happening in the info sub-tab when I right-click a .psd file.
    Any ideas?
    Thanks in advanced

    I think that is an operating system issue with file associations
    Search http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US for Windows information

  • Shopping cart delivery address not transferred to ECC PR

    Hi Forum,
    We recently upgraded from SRM 701 to 713 and to ECC EHP6. After upgrade the SC Delivery address is not getting transferred to back end PR instead the PR shows Plant address as delivery address. As per this wiki article
    Shopping Cart Delivery Address transfer from SRM to ECC - Supplier Relationship Management - SCN Wiki
    the standard behavior is that SRM Delivery address should be transferred to PR but to our OSS SAP replied that standard behavior is opposite i.e.
    PR Takes Plant address as delivery address as default.
    Response from SAP:
    Please see that the standard fields of EMLIF and LBLKZ are not
    available in BAPI structures. This is the standard functionality of
    BAPI_REQUISITION_CREATE.
    If you are using a release newer than Release 4.7 , which I believe
    you are , you can use BAPI_PR_CREATE instead. However , this is not
    possible using BAPI_REQUISITION_CREATE.
    I am sorry that I do not have a better answer for you at this time but
    the behavior that you are experiencing is standard SAP system design.
    Q1. What is the standard behavior - SC Delivery address is transferred to PR or Plant address is used in PR?
    Q2. What are the changes required to transfer SC Delivery address to back end PR?
    Thanks,
    Anubhav

    Hello Anubhav,
    Its unfortunate that SAP has not  tested the transfer of Delivery Address from Shopping cart to ECC Requisition.
    SRM uses BAPI_REQUISITION_CREATE  which is deprecated in the newer releases of ECC.  This is why the Delivery address is no longer transferred to ECC.
    Check this note:2132886 - BAPI_REQUISITION_CREATE - Delivery address is not updated
    Interestingly I found another note in SRM area which asks customers to themselves implement a call to BAPI_PR_CREATE to fix such issues.
    Check note:2108097 - Shopping cart transfer to ECC fails when using BAPI_REQUISITION_CREATE
    We have an upcoming Go Live with SRM 7.13/ECC 6.17 and I just noticed that Delivery address from Cart is not transferred to ECC Requisition.
    I have to rush an urgent change due to this.
    I dont know what else data is not being transferred without detailed testing.
    Thanks,
    Sushil.

  • User exit/BADI for Return PO item delivery Address

    Hi Guyz,
    We have a requirement where in when a PO item is marked as return PO item(In ME21n/ME22n/ME23n We have check box at item level) and click on enter/Check/Save, In delivery address of item details we have to populate Vendor address. By default SAP populates Plant address. If we manually give Vendor number in item details=>Delivery address tab then it populates vendor address. We want to automate this functionality.
    Is there any Exit/BADI which serve this purpose.
    Note: We need this functionality for few doc types(i.e PO doc type should also be available in the exit).
    Any ideas could be really helpfull.
    Thanks,
    Vinod.

    Hi,
    there are some user-exit & enhancements....
    MEQUERY1                                Enhancement to Document Overview ME21N/ME51N
    MEVME001                                WE default quantity calc. and over/ underdelivery tolerance
    MM06E001                                User exits for EDI inbound and outbound purchasing documents
    MM06E003                                Number range and document number
    MM06E004                                Control import data screens in purchase order
    MM06E005                                Customer fields in purchasing document
    MM06E007                                Change document for requisitions upon conversion into PO
    MM06E008                                Monitoring of contr. target value in case of release orders
    MM06E009                                Relevant texts for "Texts exist" indicator
    MM06E010                                Field selection for vendor address
    MMAL0001                                ALE source list distribution: Outbound processing
    MMAL0002                                ALE source list distribution: Inbound processing
    MMAL0003                                ALE purcasing info record distribution: Outbound processing
    MMAL0004                                ALE purchasing info record distribution: Inbound processing
    MMDA0001                                Default delivery addresses
    MMFAB001                                User exit for generation of release order
    MRFLB001                                Control Items for Contract Release Order
    MELAB001                                Gen. forecast delivery schedules: Transfer schedule implem.
    AMPL0001                                User subscreen for additional data on AMPL
    LMEDR001                                Enhancements to print program
    LMELA002                                Adopt batch no. from shipping notification when posting a GR
    LMELA010                                Inbound shipping notification: Transfer item data from IDOC
    LMEQR001                                User exit for source determination
    LMEXF001                                Conditions in Purchasing Documents Without Invoice Receipt
    LWSUS001                                Customer-Specific Source Determination in Retail
    M06B0001                                Role determination for purchase requisition release
    M06B0002                                Changes to comm. structure for purchase requisition release
    MEFLD004                                Determine earliest delivery date f. check w. GR (only PO)
    MEETA001                                Define schedule line type (backlog, immed. req., preview)
    ME590001                                Grouping of requsitions for PO split in ME59
    M06E0005                                Role determination for release of purchasing documents
    M06E0004                                Changes to communication structure for release purch. doc.
    M06B0005                                Changes to comm. structure for overall release of requisn.
    M06B0004                                Number range and document number
    M06B0003                                Number range and document number
    Some BADI s:
    ME_PROCESS_PO                           Enhancements for Processing Enjoy Purchase Order: Intern.
    ME_PROCESS_COMP                         Processing of Component Default Data at Time of GR: Customer
    ME_PO_SC_SRV                            BAdI: Service Tab Page for Subcontracting
    ME_PO_PRICING_CUST                      Enhancements to Price Determination: Customer
    ME_PO_PRICING                           Enhancements to Price Determination: Internal
    ME_INFOREC_SEND                         Capture/Send Purchase Info Record Changes - Internal Use
    ME_HOLD_PO                              Hold Enjoy Purchase Orders: Activation/Deactivation
    ME_GUI_PO_CUST                          Customer's Own Screens in Enjoy Purchase Order
    ME_FIELDSTATUS_STOCK                    FM Account Assignment Behavior for Stock PR/PO
    ME_DP_CLEARING                          Clearing (Offsetting) of Down Payments and Payment Requests
    ME_DEFINE_CALCTYPE                      Control of Pricing Type: Additional Fields
    ME_COMMTMNT_REQ_RE_C                    Check of Commitment Relevance of Purchase Requisitions
    ME_COMMTMNT_REQ_RELE                    Check of Commitment Relevance of Purchase Requisitions
    ME_PROCESS_PO_CUST                      Enhancements for Processing Enjoy Purchase Order: Customer
    SMOD_MRFLB001                           Control Items for Contract Release Order
    MM_EDI_DESADV_IN                        Supplementation of Delivery Interface from Purchase Order
    MM_DELIVERY_ADDR_SAP                    Determination of Delivery Address
    ME_WRF_STD_DNG                          PO Controlling Reminder: Extension to Standard Reminder
    ME_TRIGGER_ATP                          Triggers New ATP for Changes in EKKO, EKPO, EKPV
    ME_TRF_RULE_CUST_OFF                    BADI for Deactivation of Field T161V-REVFE
    ME_TAX_FROM_ADDRESS                     Tax jurisdiction code taken from address
    ME_REQ_POSTED                           Purchase Requisition Posted
    ME_REQ_OI_EXT                           Commitment Update in the Case of External Requisitions
    ME_RELEASE_CREATE                       BAdI: Release Creation for Sched.Agrmts with Release Docu.
    ME_PURCHDOC_POSTED                      Purchasing Document Posted
    ME_PROCESS_REQ_CUST                     Enhancements for Processing Enjoy PReqs: Customer
    ME_PROCESS_REQ                          Enhancements for Processing Enjoy PReqs: Internal
    ME_COMMTMNT_PO_REL_C                    Check for Commitment-Relevance of Purchase Orders
    ME_CCP_BESWK_AUTH_CH                    BAdI for authorization checks for procuring plant
    ME_CCP_ACTIVE_CHECK                     BAdI to check whether CCP process is active
    ME_BSART_DET                            Change document type for automatically generated POs
    ME_BAPI_PR_CREATE_02
    ME_BAPI_PR_CREATE_01
    ME_BAPI_PO_CREATE_02
    ME_BAPI_PO_CREATE_01
    ME_BADI_DISPLAY_DOC                     BAdI for Internal Control of Transaction to be Invoked
    ME_ACTV_CANCEL_PO                       BAdI for Activating the Cancel Function at Header Level
    MEGUI_LAYOUT                            BAdI for Enjoy Purchasing GUI
    EXTENSION_US_TAXES                      Extended Tax Calculation with Additional Data
    ARC_MM_EKKO_WRITE                       BAdI: Enhancement of Scope of Archiving (MM_EKKO)
    ARC_MM_EKKO_CHECK                       BAdI: Enhancement of Archivability Check (MM_EKKO)
    ME_CCP_DEL_DURATION                     Calc. of Delivery Duration in CCP Process (Not in Standard)
    ME_COMMTMNT_PO_RELEV                    Check for Commitment-Relevance of Purchase Orders
    ME_COMMITMENT_STO_CH                    BadI for checking if commitments for STOs are active
    ME_COMMITMENT_RETURN                    Commitment for return item
    ME_CIP_REF_CHAR                         Enables Reference Characteristics in Purchasing
    ME_CIP_ALLOW_CHANGE                     Configuration in Purchasing: Changeability Control
    ME_CIN_MM06EFKO                         Copy PO data for use by Country version India
    ME_CIN_LEINRF2V                         BADI for LEINRF03 excise_invoice_details
    ME_CIN_LEINRF2R                         BADI for CIN India - Delivery charges
    ME_CHECK_SOURCES                        Additional Checks in Source Determination/Checking
    ME_CHECK_OA                             Check BAdI for Contracts
    ME_CHECK_ALL_ITEMS                      Run Through Items Again in the Event of Changes in EKKO
    ME_CHANGE_OUTTAB                        Enrich ALV Output Table in Purchasing
    ME_CHANGE_CHARACTER                     Customer-Specific Characteristics for Product Allocation
    No.of Exits:         35
    No.of BADis:         55
    Arunima

  • Purchase Order Output delivery address

    Hi, All,
    I have issue on the delivery address in the Purchase Order. I need to a PO with multiple items, and each item there is different plant. In the item details, there is delivery address tab, showed up all plants address for each item.
    Then I need to print out the PO. But all the 'delivery to' address for each item is printed out.
    The issue is that I won't get that plant delivery address print out. I want to only 1 ship to address in this Purchase Order. This address maybe I can maintain manully somewhere? Or I need to setup somewhere?
    How to solve this issue?
    Thanks in advance

    Hi
    As has been suggested by Kl you can achieve that  by modifying your PO script or Smart form. Which one you are using? Please tel your ABAPer to hide the delivery addresses which you do not want to be pinted and tell him to bring the the delivery address in the output which you want to be printed. It should not  difficult at all for.
    Best regards

  • Delivery Address Change in Contract (Urgent)

    Hi
    we created  contract on that the  delivery address is coming wrong not our company address it comes some vendor address how to remove that
    please guide me urgent
    Regards
    Chidu
    Thanks Guys
    it has been solved
    Edited by: Chidambaram Muthukumarasamy on Feb 13, 2008 11:57 AM

    From Store loc it take the address while remove the store loc in po it comes correct
    Thanks

  • Delivery Addresses

    Hi Friends,
    We have a requirement in our project. We have different Ship To Party codes which are entered in sales order. But these Ship to parties have different Delivery Addresses on which in the invoice will be printed.
    When Ship to party is entered in sales order a selection should be available to mention the delivery address where material is to be shipped.
    In delivery note, Packing Note & Invoices thew ship to party code & the delivery address needs to be printed.
    But the ship to party code will have to be kept only one.
    Please suggest how this can be tackled.
    Quick responses will be highly appreciated
    Regards
    Dhananjay

    Hello,
    Through this we will have to change the address every time in delivery.
    My requirement is that like we have multiple ship tp party under a single sold to party, I want multiple
    delivery addresses under a single ship to party.
    Option should be available in order creation only to select the delivery address for single ship to party.
    EG:
    Sales Order
    Sold To Party = 60001
    Ship to party  = 004211
    Delivery Address = 001 (Viman Nagar, Pune)
    Delivery Address = 002 (Balaji Nagar, Pune)
    At order level after entry of sold to party & ship to party, I must be able to select a delivery address for this ship to party from above mentioned two (001 or 002)
    Please tell me how can this be tackled
    Regards
    Dhananjay

  • Default delivery address parameter in ME21N

    Hi all.
    If I have a delivery address number specified, I have to manually put it in every PO I create - is there any way of making this delivery address number default? Perhaps there is a parameter for this? It would be nice to be able to use the address number as default instead of the plant address.

    I have come across this issue as well and was looking for a solution, since we have a scenario where 2 different buildings are represented by a single storage location.  So even if we put 2 addresses on the storage location in configuration, the default will just be the first address in configuration.  As has already been mentioned, there is no link between either purchase organization or material and a default delivery address, and SAP does not provide a parameter ID on the address field in the PO.
    A possible solution appears to be the creation of your own parameter ID, which is then assigned to the delivery address data element (ADRN2).  If that is done, then a user may enter a default address number as a parameter ID in their user setup.  Note that this is a development activity, and some may consider it a customer modification because you are making a change to a SAP standard data element.  However, it is a very small change, and I do not see how it could conflict with an upgrade or application of OSS notes.  The process for doing this is explained in the following forum thread which I found on SDN:
    Error while creating Parameter Id
    I am going to pursue this option and see how it comes out.

  • Delivery address field

    Dear Experts,
    I want to do hard code one line  in delivery address .please tell me the table name for delivery address.
    Regards
    Rajesh

    hi Rajesh,
    T001W is customising table for plants. when you go to SPRO-->define plant and click F1 on plant, it gives this table.
    then you go to address from menu. click on any field and press F1. you will get a data element.
    double click on data element and click on where used list to get all tables where the field is used. you will get table ADRC.
    regards
    Seema

  • My apple tv is not working on my panasonic projector even when I changed the resolution

    My apple tv is not working on my Panasonic projector even when I have changed the resolution to all of the different settings

    What is the model #? Is it a direct HDMI connection? Have you tried a different cable and port? If possible try a different display.

  • Delivery address at Item Level and not at the Header Level

    Hello Experts,
    We are facing an issue as described below:-
    We are in SRM 7.0 using classic scenario.
    After approval of multi line Shopping Cart in SRM ,PR's are getting
    automatically created in backend R/3 system.After converting PR's into
    POs in backend R/3,we are observing that the delivery address for these
    PO'are getting printed at Item level and not at the Header Level
    inspite of the delivery address being same for all the Item level.
    As desired,the delivery address in the PO's should have the delivery
    address at the header level if the the delivery address is identical
    for all the Item Levels.
    However,if we create a PR directly in R/3 system and then convert these
    PR's into PO's in the backend R/3 system,we find that the deliver
    address are getting printed at the Header Level if the delivery address
    is same for all the item level(which is as desired)
    Any pointers will be highly appreciated.
    Thanks & Regards,
    RKS

    It is standard process only.
    In Po delivery address is maintained at item level because to which address perticular material to be delivered,
    this may change from material to material or may not change

Maybe you are looking for