Delivery and replenishment delivery

hello all,
I would like to know the difference between delivery and replenishment delivery. pl. let me know in which scenario replenishment delivery is used and how it is created.
Thanks,
Maxx

Hi,
Longman online dictionary:
to put new supplies into something, or to fill something again
Dictionary.com:
to make full or complete again, as by supplying what is lacking
Cambridge online dictionary:
to fill something up again
Well, I think in terms of SAP it is used in the same meaning: if you use a material somewhere continually (consume it continually) you need continually supply that material to be able to continue your consumption.
In SAP you use this expression in connection with
- storage location MRP scenario
- fixed bin replenishment
- KANBAN replenishment
- generally in connection with material staging
- etc.
Please consider that characteristics of this processes: you "continually" produce / consume (e.g. raw) materials and that's why you need "replenishment".
In connection with certain MTO scenario where certain raw materials are very specific and are used only once maybe there's no point in speaking "replenishment".
The procurement of these goods seems to be a very simple process (very simple purchasing activity).
So, I think delivery is delivery and there's no separate "replenishment delivery" type / document, a delivery becomes "replenishment delivery" because it is used for "replenishment".
(E.g. delivery created with reference to STO can be called replenishment delivery if you provide the raw materials from one plant to another, or from one SLoc to another SLoc).
Just my ideas..
Regards,
Csaba
Edited by: Csaba Szommer on Jan 27, 2009 9:39 PM
Edited by: Csaba Szommer on Jan 28, 2009 8:16 AM

Similar Messages

Stock transfer order (STO) Without delivery and With delivery?

Hi experts,
Could any body explain step by step procedure
Stock transfer order (STO) Without delivery and With delivery?
Thanks
Reddy

Hi
Stock Transport Order Without SD Delivery.
U dont have to maintian sales view for the materials.
1. Extend the material to those 2 plants.
2. Create UB purch document.
3. Goods issue wrt to the STO in the supplying plant ( 351 mvt type).
4. Good Receipt in the receiving plant ( 101 mvt type ).
5. Invoice verified (MIRO).
U should have specific pricing procedure for STO. In MEK0 u have to choose the appropriate pricing procedure with the accrual key linked for freight charges.
Vishal...

Under delivery and over delivery tolerances at prod order level

Hi, Pls advise how to maintain the under delivery and over delivery tolearnce at production order level (other than maintaining material master)? is ther any setting at order type or order level? pls advise.

Dear,
Go to Co01or CO02 click on Good Receipt tab here you will get option to maintain the under delivery and over delivery tolerance at production order level. There is no other setting than this and material master.
Regards,
R.Brahmankar

Over delivery and under delivery tolarance limit.

Hi all,
I want to configure the over delivery and under delivery tolerance limit
fix i.e. 5%.
Any user can give tolerance up to 5% and not more than that.
Please help me
Regards,
anant

Hi,
U can configure the same . Please refer
SPRO-MM-PURCHASING--PURCHASE ORDER--SET TOLERANCE LIMITS FOR PRICE VARIANCE
Here u can finalise the upper and lower limits as 5%. the PO shall automatically pick up the same.
Hope this helps.
Regards,
Prasanna
Award pls if helpful.

Authorization for PO fields of over delivery and under delivery tolerance

Hi,Any one know how to set authorization for PO fields of over delivery and under delivery tolerance?
For example to allow certain user to edit the these fields but other users will be only display mode.

Better create variant for restricting fields over & under delivery tolerance for certain users than applying authorization.

Create STO,Delivery and PGI delivery from an interface

Hi,
We are using a third party WMS system to manifest and ship orders froma distribution center to a store. The only data that is going to come into SAP is the Bill of Lading as to how much has shipped for a material to the store from the DC. This has to drive a Stock transport order cycle of creating an STO, create and PGI delivery. As we are building the interface, I am a bit confused as to how we can make all this happen from one data feed. Since there is only one feed and it has to trigger mutliple processes should we trigger multiple idocs (different types) to trigger the STO creation, create the delivery and PGI it (Delivery 03 idoc)?
Will it be too cumbersome to build all this logic in the interface?
Another option would be to create the STO using the feed, then run VL10B in a given time interval (Background) to create the delivery.
However, I am not 100% sure how you can spawn off a PGI job? Even if I were to run the VL02n program in the background how can I populate the pick quantity?
Any insight would be very useful.
Thanks..

My assumption is just you need to adopt delivery qty as pick qty.You are not doing any TR ,TO as your ware house is third party managed.
you need to define the picking form EKOO to your shipping point type and then the quontity will copy
You can do it in the difintion of the shipping point, you have to difine send time = 4
I will explain how need to set up this automatic picking, and then you can
work backwards from there. The automatic picking you are experiencing
is actually related to the output type EK00 assigned to your shipping
point.
Consider the following two setup steps which will result is automatic
picking:
Set the output type to EKOO, in the print picking list of the shipping
point in customizing.
Make sure the parameters below are set:
Message Language
Number of Messages
Send Time <<<<<<<<<<< this must be set to 4 (send immed)!!
Transmission Medium
1) you have to set the parameters for EK00 in the shipping-point-
maintenance in customizing:
-> Enterprise Structure
-> Definition
-> Logistics Execution
-> Define, copy, delete, check shipping point
2) as second step you define the shipping-print-parameters in
customizing:
-> Logistics Execution
-> Shipping
-> Basic Shipping Functions
-> Output Control
-> Define print parameters shipping
-> Shipping (Spec.case)
Therein there should be an entry for every shipping-point, where
you like to use the picking-list EK00!
If you have 1 & 2 setup for a particular shipping point you will
experience the "automatic" picking of deliveries.
and finally picking storage location determined as per storage conditions maintained in material master.

Uder delivery and over delivery tolerance....for matl

Hi,
Is it possible to maintain uder and over delivery tolerance for matl. If yes then please explain how?
I will award for each points.
regards,
Imran Shek

Hi,
At Material master level:
1. Maintain under delivery / over delivery tolerance in percentage in Material master Work scheduling view. U can use the indicator Unlimited instead of Over delivery tolerance if needed. (Indicator that specifies whether the quantity actually delivered may infinitely exceed the required production order quantity)
At production order level:
2 . Maintain Under delivery / Over delivery tolerance in percentage in Production Order Goods receipts tab for Finished/semi finished material.
Customization settings to get warning message:
In customization, OPK4(Parameters for Order confirmation), for the plant and order type, maintain Warning when Quantity falls below Under delivery tolerance and Warning when Over delivery tolerance is Exceeded.
By these settings you can able to give over delivery quantity and System prompts you whether this quantity is within the specified delivery tolerance or not with Warning message.
But If Delivery tolerance is varying from order to order it is suggestible to have the same settings at order level.
Hope this clears all your doubts.
Regards
Venkat

GI for over delivery and under delivery

Could you please reply to the following query
It should be possible to post the GI for an outbound delivery if the quantity effectively picked is over or under the requested quantity.
where is the control for this?Where we set this in the standard SAP scenario?
The goods isssue is applicable foe sales orders stock transport orders.
Thanks

Dear anil
Go to 0vlp (zero), select your item category and click on magnifying lens on top. Now under the tab "Quantity", you can see a field "Check overdelivery". There if you want the system to give a warning message, maintain "A" and if you want to have error message without proceeding further, maintain "B" and save.
thanks
G. Lakshmipathi

Return Delivery and Subsequent Delivery part 2 updating

Hi Experts
I made GR for PO by capturing Excises as it is defective I have returned the stock to vendor in MIGO using Return Delivery against Material Document number, at this stage part 2 is deducing the G/L account of BED, ECS and SHCess and adding with G/L account of CENVAT Suspense account. Fine it is as I expected.
But the problem is, when I making subsequent delivery for the item instead of deducing with G/L account of CENVAT Suspense account and adding the G/L account of BED, ECS and SHCess IT IS DOING REVERSELY THAT IS AGAIN IT IS deducing the G/L account of BED, ECS and SHCess and adding with G/L account of CENVAT Suspense account.
Kindly where I've make the changes for it to capture correctly.
Regards
K.R.Srinivasan

not yet answered

Return delivery and Planned delivery costs

Hi guru
scenario: I create a PO (Vendor A) with Planned delivery costs on order item.
I store planned delivery costs in the purchase order item on the Item conditions screen. ( I enter a different vendor for "freight vendor" - Vendor B, select the desired condition on the condition screen and choose Goto - Details. Overwrite the content of the Vendor field).
I create GR. OK
I create a return delivery (122) but I have to pay invoice for "freight vendor" to Vendor B.
Can I make it?

Hi,
At the time of GR;
Stock A/c - 110 - Dr
GR/IR Clearing - 100 - Cr
Freight Clearing - 10 - Cr
And when you return it then same entry gets reversed.
So at the time of MIRO, it will not propose the freight value automatically but you refer the PO and select "Planned delivery cost" and then under "GL Account" Tab, enter Freight Expense A/c - Dr and "Simulate", it will credit vendor and then Post

STO under del. and over delivery tolerance limit

Hello friends
Can anyone tell me the all settings for limiting STO for over delivery and under delivery. Its working fine for normal order (OR) and delivery but iam not able to apply on STO.
Please help
Regards
Inder

hi
follow the menu path u can mention over and under delivery tolerance for STO
IMG
|
|
MATERIALS MANAGEMENT
|
|
PURCHASING
|
|
PURCHASE ORDER
|
|
SET UP STOCK TRANSPORT ODER
|
|
ASSIGN DOCUMENT TYPE,ONE STEP PROCEDURE, UNDER DELIVERY TOLERANCE
REGARDS

No delivery created & partial delivery postings[Non SAP(FTP) to SAP(idoc)]

Dear All,
When the sales posting(invoice,returns etc) is triggered later in SAP PI/XI it is successful.
Once it reached ECC system the idoc's are successfull but the delivery is not created.
Please find attached images for your reference.
It is basically file to idoc scenario.
Thanks and Regards,
Rajesh

Dear All,
When the sales posting(invoice,returns etc) is triggered later in SAP PI/XI it is successful.
Once it reached R3 system(ECC) the idoc's are successful but the delivery is not created.
Please find above attached screenshots.
It is basically file to idoc scenario.
For successful delivery completions, an delivery no is created and saved.
These are basically splitted in to 3 postings namely Fully delivery, Partial delivery and No delivery.
This needs to be corrected at base level. Please advice on above issue.
Thanks and Regards,
Rajesh
SAPSD Enquiry sapsd sapsd SD MODULE SD MODULE SAPXI XIPI SD SD IDOC_Err_Processing?? SAP PI XI EXPERT SAP PI SAP SD SAP MM sap sd InboundDelivery inbound idoc-deficit IDOC-XML to IDOC-Flat file conversion

Replenishment Delivery and STO relation in SAP APO

Dear SAP Gurus,
I need to find a table (or function or BAPI) where I can relate the replenishment delivery with the STO (schedule line item) that generated the replenishment delivery. I know that this information is available in the table LIPS on the ECC side on fields LIPS-VGBEL and LIPS-VGPOS.
We need this information for a customized report that uses pegging relationships to identify more critical products.
The point is: On the source location we have the replenishment delivery as a demand in which we can identify pegging relationhips, on the target location the same document appears with quantity zero so we cannot identify pegging relationships but the STO that originated the mentioned replenishment delivery appears with the quantity and shows pegging relationships.
We couldn't link on the APO side the replenishment delivery on the source location to the STO on the target location to build the report based on pegging relationships.
Any idea on how to get the link?
Thanks and BR
Mauricio

Dear gurus
We have the STO return intercompany scenario with billing challenge.
In the company A we use standard valuation and material ledger in three currencies - EUR USD and GBP.
In the company B we use moving average valuation and material ledger in three currencies - EUR USD and GBP.
When we had sold in STO from company A to B goods in standard intercompany scenario
1. ME21N -> STO (NB) with transfer price (from B to A)
2. VL10B -> Intercompany outbound delivery (NLCC) from A to B
3. VF01 ->IV billing from A to B
4. MIGO_GR with 101 movement type on B side
the material ledger valuated the goods in e.g. 1USD, while the exchange rate was 1USD=0.57EUR.
Now we have to return these goods. The exchange rate is 1USD=0.50EUR.
The steps are as following:
1. ME21N STO (NB) with flag R from B to A
2. VL10B from A to B
3. MIGO_GI with 161 goods movement
The problem is that the material ledger remembers the value in USD and in the moving average of the current EUR and blocked the GI from B to A
expected could not be done
4. VF01 with credit IV billing.
Is it a bug that could be solved?
We already evaluated SAP notes OSS 430074 and 489543 without success.
Kind regards,
Eddie
SAP SD Functional Analyst
Visonic
(C) +972-54-7805649
(C UK) +972-54-6775-716
(O) +972-3-6456-716
www.visonic.com

Replenishment delivery for material with MRP areas and Avl Check

HI We have MRP area at storage location level maintained for materials. Stock exists in the plant in the storage location which is part of the MRP area.
Now when I create STO and try to create delivery for the same, system is giving message 0 stock available and not creating delivery. Material has 02 Avl Chck group.If I deactivate the MRP area in the material master, it allows creation of delivery.
How can I ensure that system creates delivery even though stocks exist in MRP area relevant sloc only in the plant?
Sriram

1) According to SAP when inbound deliveries are used and your delivery item category is set up for mvt type 101, these should be received with transaction VL32N. If you use MIGO/MB0A instead the GR status in the delivery will not be updated. If you then report on open deliveries you'll notice that nothing is received in the course of time. Amazing. Now if you set up the delivery item category without the movement type your inbound will not even be GR relevant. Just one of these things that's nice to be aware of.
Check note 199703.
may b it helps...

Replenishment delivery NL created without reference to STO

Dear All ,
I have noticed in SAP that replenishment delivery ( NL ) is created manually in SAP without referencing to Stock transport Purchase order. Can any one explain how it can be created or is it a glitch in SAP system .
Looking forward to your valuable suggestions/solutions .
Thanks and regards
Veera

Hi,
This can be done in transaction VL01NO.
BR

Delivery and replenishment delivery

Similar Messages

Maybe you are looking for