Delivery block 01 does not allow requirements

Hi,
I am doing assembly processing for creation of Projects through sales order,
selected the following requirement class 212-PS04
requirement types- KMPN-212.
Now when i am creating Sales Order and saving,it is not creating any projects,
and is giving following error
"Delivery block 01 does not allow requirements"
also i have created standard WBS and Network and assignment material to it.
Please help.
Thanks,
Nitin

hi
please check in the sales order header whether delivery block indicator is set "01"
if so remove and save.

Similar Messages

I am trying to stream via ESPNWatch but I get a message saying I have a popup blocker that does not allow the streaming to happen. I unchecked the pop up blocker box in the Safari preferences to no avail. Any ideas?

I am trying to stream via ESPNWatch but I get a message saying I have a popup blocker that does not allow the streaming to happen. I unchecked the pop up blocker box in the Safari preferences to no avail. Any ideas?

Might be a Safari extension...
From your Safari menu bar click Safari > Preferences then select the Extensions tab.
If there are any extensions installed, turn that OFF, then quit and relaunch Safari to test.

How to block a payment in F110, when the system does not allow us to block

Hi all
Blocking of a payment happens in the following areas :
1. In a single document Fb02 transaction we can block a document by giving A as option for not paying for that document before going to F110.
2. We can also block a vendor through Vendor master area
3. We can block a Vendor from paying through Xk05.
Now my doubt is that.... i had saved a proposal in F110, after saving it, now i want to block a payment for a vendor. But the system does not allow me to block it. Why the system does not allow the block. Or is there any type of error like this, that system does not allow the block after setting up the proposal for payment.
Can anyone help me out in this...
thanks and regards
SL

Dear,
Even you set payment block after saving the proposal system will execute that payment. So better you delete this proposal and then set payment block in the vendor line item. Thereafter system will pick that bill for payment.
Regards,
Chintan Joshi

I added exceptions for the pop up blocker but most of the time it still does not allow the pop ups for the sites I listed as exceptions

the pop up blocker is inconsistent. i added websites to the exceptions list but most of the times when i load firefox it does not allow the exceptions...sometimes it does but i can't find any reason or consistency as to why it sometimes allows them and sometimes doesn't. They are clearly listed on the exceptions option.
What is wrong?

<blockquote>Locking duplicate thread. 
Please continue here: [[/questions/945652]]</blockquote>

I have 2 emai accounts which worked perfectly on iphone 4 but on iphone 5 my msn account wont let me reply to emails sent to that account, it leaves the message in my outbox saying recipient was rejected by the server because it does not allow relaying

I have 2 email accounts which both worked perfectly well on my ipone 4 but since going over to iphone 5 my msn account will not allow me to reply to any emails. It places a message on my screen stating a copy has been placed in your Outbox. The recipient @.com was rejected by the server because it does not allow relaying. Any ideas on how I can sort this. Would it be worth deleting my MSN account ant putting re-inputting the details again?

Your email provider has blocked the standard mail port 25 for sending emails and is requiring a different port. This is to avoid mail relays that use mail clients to send spam. You need to find the port that is used by your provider for sending outgoing mail. Then change the settings in your email account on your phone to match the port. You will also have to provide some security credentials for the account.
You can also try deleting the email account from your iphone, and the adding the email account back as this will many times set the correct port for sending emails.
You could also do a Google search on the the settings for your device with your email provider. That will provide you with the proper settings.

My Iphone 4 will not let me send an email or reply to an email. The message states it has put it in my outbox and it is rejected by the server because it does not allow relaying??? I can't seem to find an answer to fix this. Any help?

My Iphone 4 will not let me send an email or reply to an email. The message states that it has put my email in my outbox and that my server does not allow for relaying. Can anyone help with this? I have read some other answers and nothing has worked Thanks

Your email provider has blocked the standard mail port 25 for sending emails and is requiring a different port. This is to avoid mail relays that use mail clients to send spam. You need to find the port that is used by your provider for sending outgoing mail. Then change the settings in your email account on your phone to match the port. You will also have to provide some security credentials for the account.
You can also try deleting the email account from your iphone, and the adding the email account back as this will many times set the correct port for sending emails.
You could also do a Google search on the the settings for your device with your email provider. That will provide you with the proper settings.

I keep getting a message "cannot send mail" a copy has been placed in your outbox. The recipient was rejected by the server because it does not allow relaying

I keep getting a message "cannot send mail" a copy has been placed in your outbox. The recipient was rejected by the server because it does not allow relaying. How can I fix this error so I can send emails.

The issue definitely sounds like your Outgoing/SMTP settings need to be changed. Simply set them to the proper settings for your provider as was suggested above.
I found this link for Knology: http://support.knology.net/content/email.setup.cfm
The SMTP settings can be edited on the iPad/iPhone by going to Settings--> Mail, Contacts, Calendars, edit the account having trouble, click the Account, then at the bottom is the SMTP server info, click on it to edit it further.
It should allow you to edit the primary smtp server and let you enter all the good stuff as you see in the Knology link above.
Some providers require you to register your account on their service like AT&T.

Dreamweaver does not allow me to edit the editable region

Oh my, I'm so desperate in this, I have a .dwt and have set up the editable region as well. When I want to make a new html file from the said template dreamweaver does not allow me to edit it. I mean, all the code is completely grayed out as if the template itself is locked by default.
What I want to do is to create several new pages such as new albums, charts, genres, contacts (which all based on the home template) The home template itself has slider in its body. For the new html files I'm about to create (which I'm so desperate why I can't do so) I want the header and footer to remain the same.
Here is an image of my index.dwt (my homepage) anything inside the red frame is what I want to edit for new albums, charts, genres, contacts, login page, etc. The top part is the header and the bottom one is the footer (Excuse the right image, I'm working on dual screen)
Any help will be appreciated!
Sorry for my english

Hello SeptianNugraha,
here some hints concerning while handling templates (I quote):
The main principle of DW Templates is:
Non-editable regions = propagate to all child pages. The content of non-edtable regions is identical on all child pages. When you edit a non-editable region, DW propagates all changes to all child pages.
Editable regions = do not propagate because they're unique to every child page. The whole idea of editable regions is that they contain page specific content which does not appear on any other child page.
And:
PART 1
1. Create a prototype page with all the sitewide elements (common header, footer, sidebar, etc..) that you will need for your entire project. This requires some careful pre-planning even for small web sites.
2. Validate your code & test this prototype page in all major browsers. 3. When you're completely satisfied with your layout, SaveAs Template. DW will save this as a .dwt file in a site folder called Templates.
4. DW will ask you to add Editable Regions for stuff that will change from page to page. Do this and SAVE.
5. Close your Template.dwt file.
PART 2
1. File > New Page > from Template. Select the template you wish to use. Hit OK.
2. This is a child page. You can only edit content within editable regions. Everything else is locked.
3. SaveAs index.html (your home page) to the root in your local site folder.
PART 3
Repeat PART 2 for each additional page required.
PART 4
1. Open your main TEMPLATE file and add a navigation menu with links to your site pages.2. SAVE.3. DW will ask if you want to populate changes to child pages. Hit yes.
4. Publish all site pages to your server.
PART 5
If you should ever need to edit your TEMPLATE .dwt file, Repeat PART 4.
Good luck!
Hans-Günter

Farm Remote App 2012 R : Your system administrator does not allow the use of default credentials to log on to Work Resources

Hi
Here is the situation:
I have a Farm with 3 servers W2012R2 in a Domain
Server1                           Server 2
Server3
RDSession Host            RDSession Host
RDSession Host
Connection Broker        Connection Broker (Passive)
RD Web Access
2 DNS Alias : - poc.mydomain.local (Use for the RD Web Access and points to Server1
                  -poccb.mydomain.local (Use for the Connection Broker and points to Server1)
I have setup the Connection broker in HA with Server2 as Passive Server : DNS Round Robin poccb.mydomain.local (Server1)
The certificate Manager has generated 2 CA certificates :
- 1 for the RD Web Acc (poc.mydomain.local
-1 for Connection Broker SSO and for publishing
I have created 1 Group Policy for these 3 servers and 1 GP for my client Windows 7 SP1.
Server GPO :
Computer/Administrative Templates/Windows Components/Remote Desktop Services/Remote Desktop Session Host/Security
Always prompt for password upon connection=Disabled
Require use of specific security layer for remote (RDP) connections : SSL (TLS 1.0)
Set client connection encryption level : High Level
Client GPO
Computer/Administrative Templates/System/Credentials Delegation = Allow delegating default credentials (Concatenate OS defaults with input above)
TERMSRV/POCCB.mydomain.local
I use no Gateway and in my collection,I have activated SSL (Like in my Server GPO)
I have now problem with SSO.
Connection with remote desktop client with server name = poccb.mydomain.local
Your system administrator does not allow you the use of default credentials to log on to the remote computer poccb.mydomain.local because its identity is not fully verified
If in my client GPO I add the physical name of the 3 servers, it works :
TERMSRV/Server1
TERMSRV/Server2
TERMSRV/Server3
Open RDP Files with server name = poccb.mydomain.local
if my connection broker connects me on Server1 , no problem
But If I arrive on Server2 & Server 3=
Your system administrator does not allow the use of default credentials to log on to Work Resources
I have searched on internet. No result for " to log on to Work Resources"
Any idea ? Thanks for your help

Hi,
Thank you for posting in Windows Server Forum.
Firstly check that, your user is using domain\username to enter the credential in the dialog box.
Now for a try, you can edit .rdp file with notepad and just place “enablecredsspsupport:i:0” line in it, save it an launch to check whether you are facing same issue.
As you are using windows 7 then upgrade to RDP 8.1. Also as you have already enter the FQDN name of server under “Allow delegating default credentials”. For a try please enable and configure for all the remaining settings as follow and check the result.
Start / Run / gpedit.msc / Computer Configuration / Administrative Templates / System / Credentials Delegation, and make sure you have the following four options enabled and configured:
Allow Delegating Default Credentials with NTLM-only Server Authentication
Allow Delegating Default Credentials
Allow Delegating Saved Credentials
Allow Delegating Saved Credentials with NTLM-only Server Authentication
Finally, open a command prompt and use “gpupdate /force” command to apply the policy directly.
More information:
Remote desktop credentials did not work
Hope it helps!
Thanks.
Dharmesh Solanki

Sales order does not allow make-to-order production

Dear Friends,
I am trying to do do planned order for sales order in MD50 it was showing the error message as
"Sales order does not allow make-to-order production"
Can any one solve this
Shakthi

Hi Shakthi,
It is also possible to set the priority for Requirement Type determination like
0 Material master strategy, then item category and MRP type
1 Item Category and MRP Type
2 as 1, with check for allowed requirement type.
The transaction for this is same as "Requirement Type Determination :
Sales and Distribution --> Basic Functions --> Availability Check and Transfer of Requirements --> Transfer of Requirements --> Determination Of Requirement Types Using Transaction
Look for "Source".
In this transaction, Please, check "Requirements".
Please, make sure of the following 2 things :
1. If you do not set an indicator for maintaining the requirements class: Transfer of requirements is not carried out, irrespective of the specification you make at schedule line level for the transaction.
So it is necessary to mantain the setting first at the Requirements Class. As mentioned in my earlier posts, the requirement class for the material can be found out from Planning Strategy / MRP3 view --> Main strategy (defined in the strategy group) --> Requirement Class for Customer Requirements.
The IMG path for "Define Strategy" is Production --> Production Planning --> Demand Management --> Planned Independent Requirements --> Planning Strategy --> Define Strategy.
2. Once the "Requirements" indicator is set in Requirement Class, the requirements indicator at the Schedule Line decides whether or not you require transfer of requirments for the relevant transaction.
I hope this should solve your problem.
Regards,
Sandeep

Delivery block in sales order and requirements md04

Hello and good morning to all,
we have the following scenario:
From our customer we received some sales order via EDI. "XI"/"SAP" created the standard sales order TA with delivery block Z1 ( header ) - all things are blocked.
The problem is, for the sales orders with delivery block Z1 we have also requirements in md04.
We have also set Reasons for and Scope of Deliv.Blocks: Transfer of Req.Block
How we can block / stop the requirements in md04 for sales orders with delivery block?
Thanks for your help!
Best regards
Petra Schober

I dont think with Standard Customization you can achieve this with Delivery blocks. As you aware, with delivery blocks you can just stop the confirmation ,pick, pack & GI. but the TOR.
Even if you set the Delivery block "01- Credit limit', then system re-set confirm qtty as "Zero". But still order requirements will pass to MD04 ( assumption , Block is temparory, anytime it can be released, but if requirement is not transferred for planning, then its difficult for the planner to make the requirement available on specified time) .
Only "reason for rejection" will restrict to not to transfer to MD04. So try to explore the functionality of "Reason for rejection" & apply the same with "Delivery Blocks". But you may need enahancement to achieve this.
Regards,
Reazuddin MD

Error : RFC Partner does not allow to start the Program.

Hello Guys,
     I have a requirement where in BAPI_DOCUMENT_CHECKOUTVIEW2 need to be called from the front end (JAVA).
     When i run this BAPI in SAP it works fine ,when i run the same form front end it throws the error saying
          "RFC Partner does not allow to start the Program."( I have checked the error in debug mode).
         SAPGUI is installed at the JAVA developers desktop,still am facing this error.
        The error is thrown at the below code:
                  CALL FUNCTION 'RFC_PING'
                                                DESTINATION 'SAPGUI'
                 EXCEPTIONS: communication_failure = 1 MESSAGE lf_msg_text
                                              system_failure        = 2 MESSAGE lf_msg_text.
Please suggest.
Regards,
Najam

HI,
You need a RFC path in this case.You can check SM59 and contact your basis team regarding this.

Why does ipod does not allow to download free app free??

My Ipod touch does not allow to download anything that is free or paid apps on my ipod. even if an app is free it asks for verification which directs me to payment gallery how come this is happening if an app is free it should not charge me it should not go for verification payment info How do I rectify this problem please help as this is frustrating I cannot download anthing from the app store!!!!!!!!

To purchase anything with a normal account requires a valid payment method. Yu can however create a new account that is oly good for app. To do that see:
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card

I want to mirror an iOS device to my computer for demonstration and training purposes. I cannot use Airserver as my company VPN does not allow the connection. Is there a hardware solution instead?

I want to mirror an iOS device to my computer for demonstration and training purposes. I cannot use Airserver as my company VPN does not allow the connection. Is there a hardware solution instead?

Shoeb, hi.
Thanks for replying and apologies for my tardiness in responding. I have just completed a re-creation of my web page using CSS/HTML rather than XML/XSLT and now I find that when saving in MHT format the watermark/background image is saved, which is nice, but trying to save it as 'webpage complete' under 'save as' in the browser still does not work. (For those who are new to Firefox, MHT files are not supported by the browser, but using the FF extention UnMHT one can open such files and save web documents as MHT files, meaning no accompanying folder is required to properly view the file.)

JFrame which does not allow resizing (maximizing, minimizng)

I want to develop a login frame which does not allow resizing (maximizing, minimizing as this does not make sense) and with 2 fields, JTextField and JPasswordField.
The frame is developed but has the usual resizing handles.
How to do?
Many tks for any information.
John Pashley

Don't use a JFrame. Also, don't expect code like this again; I did it for fun.
It requires your modification.
* Title: Login Screen
* Description: Login Screen
* Class: Login ScreenLoginScreen
* Copyright: who cares
* Company: who cares
* @author who cares
* @version who cares
import java.awt.*;
import java.awt.event.*;
import java.net.URL;
import java.util.Vector;
import java.io.File;
import javax.swing.*;
public class LoginScreen extends JDialog implements ActionListener, FocusListener
 private JTextField name;
 private JPasswordField password;
 private JButton loginButton;
 private JButton cancelButton;
 private JDialog thisDialog = this;
 private ImageIcon splashImage;
 private String appTitle;
 private int logCounter;
 public LoginScreen()
 super();
 this.toFront();
 setTitle("Login");
 addWindowListener(new WindowAdapter()
 public void windowClosing(WindowEvent e)
 System.exit(0);
 getContentPane().setLayout(new BorderLayout());
 splashImage = new ImageIcon( getClass().getResource("images" + File.separator + "image.jpg")) );
 getContentPane().add(new JLabel(splashImage), "North");
 getContentPane().add(makeLoginPanel(), "Center");
 getContentPane().add(makeButtonPanel(), "South");
 pack();
 setResizable(false);
 setLocationRelativeTo(null);
 setVisible(true);
 * make login panel
 private JPanel makeLoginPanel()
 JPanel loginPanel = new JPanel();
 JLabel label;
 loginPanel.setBorder(BorderFactory.createEmptyBorder(20, 20, 0, 20));
 GridBagLayout gbl = new GridBagLayout();
 GridBagConstraints gbc = new GridBagConstraints();
 loginPanel.setLayout(gbl);
 gbc.weightx = 1.0;
 gbc.fill = GridBagConstraints.HORIZONTAL;
 gbc.insets = new Insets(0, 5, 10, 5);
 gbc.gridx = 0;
 gbc.gridy = 0;
 label = new JLabel("Login Name:", SwingConstants.LEFT);
 gbl.setConstraints(label, gbc);
 loginPanel.add(label);
 gbc.gridx = 1;
 name = new JTextField("insider", 10);
 name.addFocusListener(this);
 gbl.setConstraints(name, gbc);
 loginPanel.add(name);
 gbc.gridx = 0;
 gbc.gridy = 1;
 label = new JLabel("Password:", SwingConstants.LEFT);
 gbl.setConstraints(label, gbc);
 loginPanel.add(label);
 gbc.gridx = 1;
 password = new JPasswordField("insider",10);
 password.addFocusListener(this);
 gbl.setConstraints(password, gbc);
 loginPanel.add(password);
 return loginPanel;
 * make button panel
 private JPanel makeButtonPanel()
 JPanel buttonPanel = new JPanel();
 buttonPanel.setBorder(BorderFactory.createEmptyBorder(10, 10, 10, 10));
 //make LogIn button
 loginButton = new JButton("Login");
 loginButton.setActionCommand("Login");
 buttonPanel.add(loginButton);
 rootPane.setDefaultButton(loginButton);
 loginButton.addActionListener(this);
 this.getRootPane().setDefaultButton(loginButton);
 //make Cancel button
 cancelButton = new JButton("Cancel");
 cancelButton.setActionCommand("Cancel");
 buttonPanel.add(cancelButton);
 cancelButton.addActionListener(this);
 this.addKeyListener(new KeyAdapter()
 public void keyReleased(KeyEvent e)
 if(e.getKeyCode() == KeyEvent.VK_ESCAPE)
 cancelButton.doClick();
 return buttonPanel;
 * Action handler for login and cancel buttons
 public void actionPerformed(ActionEvent e)
 JButton btn = (JButton) e.getSource();
 if (btn.getActionCommand().equals("Login"))
 // Because login() process happens before swing process (above),
 // force it to happen "later"
 SwingUtilities.invokeLater(new Runnable()
 public void run()
 login(); //create this method, okay?!
 else if (btn.getActionCommand().equals("Cancel"))
 System.exit(0);
 * Focus gained handler for username and password buttons
 public void focusGained(FocusEvent e)
 JTextField tf = (JTextField) e.getSource();
 tf.selectAll();
 * Focus lost handler for username and password buttons
 public void focusLost(FocusEvent e) {}
 private void showErrorMessage(String message, String header)
 JOptionPane.showMessageDialog(getContentPane(),
 message, header,
 JOptionPane.ERROR_MESSAGE);
 * This method controls the cursor for login window. If isWait is set to
 * true, dialog's cursor is set to Cursor.WAIT_CURSOR. If isWait is set
 * to false, the cursor is set ta Deafult.
 * While the window is in WAIT mode, this method will also disable Login
 * and Cancel buttons to ensure the user does not accidently request
 * a cancel while loging in or launching a second login.
 private void setWaitCursor(boolean isWait)
 /* In order to disable login and cancel buttons while logging in to the
 application, this method will temporarely change action commands and
 reset them when login process failed to give user another chance.
 Note: Disabling the buttons by calling setEnabled(false) did not work
 since login() method is called from an action event handler and the
 process will not be released to AWT until login method is complete.
 if (isWait)
 this.getGlassPane().setCursor(new Cursor(Cursor.WAIT_CURSOR));
 this.getGlassPane().setVisible(true);
 loginButton.setActionCommand("none");
 cancelButton.setActionCommand("none");
 else
 this.getGlassPane().setCursor(Cursor.getDefaultCursor());
 this.getGlassPane().setVisible(false);
 loginButton.setActionCommand("Login");
 cancelButton.setActionCommand("Cancel");
} //end loginscreen

Delivery block 01 does not allow requirements

Similar Messages

Maybe you are looking for