Delivery block on item level in ERP when document is changed in CRM

Hi,
we have integration order management from CRM replicated to ECC 6.
each time we change the document in CRM, the item in ECC then will have delivery block.
even the header delivery block is removed, the item will remain block for delivery.
unless we manually remove the delivery block on item level for each item.
what we'd like to have is standard delivery block on header level.
any advice is really appreciated.
JD
Edited by: Jushan Djuwardi on Jun 13, 2008 4:13 AM

Hello,
I have tried to add a header delivery block in CRM GUI, or CRM Webclient,
but didn't find the required field.
Also, I have tried to set a header delivery block via a BADI implementation, but it cant be set.
Does anyone knows if there is a possibilite for setting CRM header delivery block?
The item delivery block can be set manually or via a BADI Implementation.
Best Regards
Jesus Padilla

Similar Messages

  • Delivery block at item level in sales order,Qty should not be confirmed

    Dear all
    We have a below requirment
    We will have multiple line items in sales order and put delivery block at item level.If delivery block is put at item level it should not confirm the qty and pass on to MRP
    But if we put at header level delivery block,schedule line qty at item level are not getting confirmed.So requirements are not passed to MRP-This is correct .Working as per SAP standard configuration.
    Can you tell how to activate the same for item level delivery block.if same delivery block is put at item level,it is confirming the quantity.But we don't want confirmation of qty to happen.
    Can you give us solution
    Regards
    Sudha

    We had similar issue , there will be confirmed quantity but the requirement will not transfer to MRP , We used Item category configuration ( Copied new item category assignment and it should behave as Inquiry item category)
    Check OVZ7 T code for customizing the u201CDelivery Blocku201D in your sales document to block Confirmation block
    Check the  customizing OVZ8: if the flag  Transfer of Requirement
    Transfer of requirements of the requirement class should be ON.
    In the sales order the requirement type is determined by the combination sales order item + MRP type.
    Refer SAP Help URL below
    [Setting a Delivery Block |http://help.sap.com/saphelp_470/helpdata/en/93/744bf2546011d1a7020000e829fd11/content.htm]

  • How to auto reset delivery block in item level in sales order

    hi i have one scenario. After creation of sales order it needs to be approved through work flow at item level so that without approval no delivery can be made. We have blocked the items in sales order now we want after approval the blocked status should be auto reset from block to free. how to do it.

    Hi,
    How is the approval taking place? Is it through work flow? If yes, You can write code for BDC or BAPI for removing the block after the approval step.
    If it is manual approval, then you can write a program with BDC/BAPI for removing the block with input as sales order number.
    Ask the approver to run this program after the approval.
    Thanks,
    Vinod.

  • Delivery & Billing block at item level when I create order with config mat

    HI All,
    I am getting delivery & Billing block at item level when I create an order with config material.
    And I am unable to remove the blocks manually since they appear in display mode even in change mode of sales order.
    but I could see a biiling document for this order in document flow with 0 value.
    Note:
    1. The item does not have any reason for rejection
    2. Ther is no block set at schedule line category too.
    Please give me your valid suggestion as soon as possible since it is production issue.
    Thanks & Regards

    Dear chandrashekar,
    Goto  VOV8 , select your order type - Billing - Billing block - keep this field as blank .
    Second one , take the default billing type in order type (VOV8) , and Goto OVV4 and click on selection criteria and select billing type , enter your billing type and choose , you will now get the listing of that biling type and check your settings are correct.
    saravanan

  • Delivery & Billing Block at Item level in Sales Order ( Urgent)

    HI All,
    I am getting delivery & Billing block at item level when I create an order with config material.
    And I am unable to remove the blocks manually since they appear in display mode even in change mode of sales order.
    but I could see a biiling document for this order in document flow with 0 value.
    Note:
    1. The item does not have any reason for rejection
    2. Ther is no block set at schedule line category too.
    Please give me your valid suggestion as soon as possible since it is production issue.
    Thanks & Regards

    Hi Chandra,
    Please try with this
    Run VKM5 transaction with that delivery
    I hope it will help you,
    Regards,
    Murali.

  • Delivery address on item level in Sales Order causes delivery split

    Hi all,
    I have an issue where our customer is sending in EDI-orders with delivery address on item level. This generates different SAP addresses for each line in the Sales Order later causing a delivery split in VL01n. Normally a SO contains 20 items where 10 needs to go to one physical address and the other 10 to another. What I would like is to only split on the physical address and not on each SAP address. E.g. 2 deliveries created instead of 20.
    Its ECC 5.0.
    Anyone has experience to share on this issue?
    Thanks
    BR
    Peter

    We had similar issue , there will be confirmed quantity but the requirement will not transfer to MRP , We used Item category configuration ( Copied new item category assignment and it should behave as Inquiry item category)
    Check OVZ7 T code for customizing the u201CDelivery Blocku201D in your sales document to block Confirmation block
    Check the  customizing OVZ8: if the flag  Transfer of Requirement
    Transfer of requirements of the requirement class should be ON.
    In the sales order the requirement type is determined by the combination sales order item + MRP type.
    Refer SAP Help URL below
    [Setting a Delivery Block |http://help.sap.com/saphelp_470/helpdata/en/93/744bf2546011d1a7020000e829fd11/content.htm]

  • DELIVERY BLOCK AT HEADER LEVEL FOR ORDERS VIA EDI...

    Hi Experts,
    I have got a situation, My client gets an EDI inbound sales orders from Canada, for those orders he faces delivery block at header level..which they dont want...
    Can someone please guide me exactly where he receives those orders, how he processes it, and whats the background configuration for bloking those orders...how to start the checking  the settings
    Thanks & Regards,
    Srikanth.R

    Hi,
    Get the posted Sales order number # via EDI ie We02. Now got to VA03 and input that sales order.When the sales order is opened.
    Now from the Menu  -->Go to >header>Sales .Note down the order type.
    Now go to the Transaction code:VOV8 for the order type check whether the delivery block is maintained.
    Regards,

  • Report on delivery data in item level for list of po

    Dear all
             How to take Report on delivery data in item level for list of po
    regards
    M.Chandra mohan

    You can check any of the standard reports like ME2M with the selection variant as "PO where GR exists"

  • Complete Delivery at Line item level in Sales Order

    Hello Gurus,
    While creating a sales order for some customers (the sales area tab in the customer master data has complete delivery and full delivery at item level), the complete delivery flag should be enabled and partial delivery flag at item level shoulb be C.
    We have a situation where this is not working in some cases. I need to know what user exits are copying the customer master data into the sales order fields. Please give me a lead how I can proceed with this.
    Regards,
    Balu

    Hi Balu,
    Please check user exits in program MV45AFZZ.
    i.e USEREXIT_MOVE_FIELD_TO_VBAK 
    Regards,
    Gumanti

  • Confirm Goods / Service display delivery date on item level

    Hello all,
    in transaction Confirm Goods / Service user can see creation date of the purchase order. Is it possible to somehow display required delivery date on item level. Field "Required on" which is visible in Basic data of the item.
    Would like to have as minimum modification as possible, maybe through customizing (of course if possible) :o))
    TIA
    Gordan

    Hello all,
    in transaction Confirm Goods / Service user can see creation date of the purchase order. Is it possible to somehow display required delivery date on item level. Field "Required on" which is visible in Basic data of the item.
    Would like to have as minimum modification as possible, maybe through customizing (of course if possible) :o))
    TIA
    Gordan

  • Route value is not changing for item level in VA02 when we change shipping

    Hi experts,
    I was facing a problem in VA02. When we change shipping condition type in header level,
    the item level route data has to be changed. But in  my case it is not happening. This is happening for only one line item and rest of the line items route values are same as prvious(last) shipping condition type.
    Where do i change the code.
    Can anyone please explain this one and help me out this.<priority normalized by moderator>
    regards,
    Sree.
    Edited by: Vinod Kumar on Aug 26, 2011 1:29 PM

    a

  • How to update Item level shipping data when item category is changed

    Hi All,
    My requirement is when user changes a sales quoatation item category value and presses 'Enter' then based on item category's value the corresponding item and it's sub-items' shipping data(delivery status) should be modified.
    To achieve the same, i tried implementing the BADI CRM_ORDERADM_I_BADI which gets triggered when user makes changes in sales quoatation item level and presses enter. Now my query is within this implementation i am not able to use CRM_ORDER_MAINTAIN as it throws "Recursive_call" error so how can i update item level shipping within this implementation?
    Regards,
    Bharathy.

    Hi Shwetha!
    I have never used this FM....but i have had a look and u hace to update the structure:
    PRODUCTS STRUCTURE BAPIBUS20001_PRODUCTS
    In this structure: BAPIBUS20001_PRODUCTS-SHORT_TEXT.
    Regards,
    Mon

  • Billing block at item level still billing is possible for the item.

    Hi friends,
    I have billing blocks at header and item level. When the block at the header and item  levels are  active no billing takes place, but if the block at header is removed then an item with a billing block is also billed. How do i stop this ? Please suggest.
    Regards,
    Udaynath.

    Rectified. It was wrong copying requirement at the item level.
    Regards,
    Udaynath.

  • User Exit for Updating Delivery Plant at Item Level in Sales Order

    Hello Experts
    There is a requirement to determine the delivery plant for each item level and than update the items with newly determined plant.  There is a user exit MV45AFZZ routine FORM USEREXIT_MOVE_FIELD_TO_VBAP. to update the item level entries in Sales Order in VA01 or VA02. Is this the right place to do this?, if yes , do i need to perform any other standard logic (like re determine Shipping points , schedule lines ) for newly determined plant? If not , can you please suggest any other place , BADI or user exit to change the delivery plant of sales order.
    Thanks a lot....
    -Harkamal

    Best place is MV45AFZZ-USEREXIT_SAVE_DOCUMENT_PREPARE. Populates the values just before saving the document. You can have your own deriving logic. Make sure that peice of code is trigger only for Sales Order create or change (VA01/VA02).
    Are you kidding???  You do realize that this is AFTER all validations against configuration, ATP, pricing, etc. have been performed??!!!  Never, ever change a critical value like plant in the SAVE user exits...

  • Delivery address at Item Level and not at the Header Level

    Hello Experts,
    We are facing an issue as described below:-
    We are in SRM 7.0 using classic scenario.
    After approval of multi line Shopping Cart in SRM ,PR's are getting
    automatically created in backend R/3 system.After converting PR's into
    POs in backend R/3,we are observing that the delivery address for these
    PO'are getting printed at Item level and not at the Header Level
    inspite of the delivery address being same for all the Item level.
    As desired,the delivery address in the PO's should have the delivery
    address at the header level if the the delivery address is identical
    for all the Item Levels.
    However,if we create a PR directly in R/3 system and then convert these
    PR's into PO's in the backend R/3 system,we find that the deliver
    address are getting printed at the Header Level if the delivery address
    is same for all the item level(which is as desired)
    Any pointers will be highly appreciated.
    Thanks & Regards,
    RKS

    It is standard process only.
    In Po delivery address is maintained at item level because to which address perticular material to be delivered,
    this may change from material to material or may not change

Maybe you are looking for