Delivery completed indicator is not working

Hi Experts
Inspite of setting delivery indicator in po it is allowing make gr with tcode MIGO.
How to configure/set effective workingness of the same
Thanks in Advance
Prashanth

Hi,
The standard behaviour of SAP is as below.
If have created a PO for say 100 kg.
You receive 70 KG.
For some reason you don't expect to receive more and set delivery complete indicaor.
The effect is,
1. The PO will not come as open PO in the reports, even if 30KG is pending.
2. If you still want to post this 30 KG, system will NOT stop you, however. You can post.
So I think you don't have any problem in your system. Just the understanding of the effect of the indicator was not correct.

Similar Messages

Delivery completed indicator is not tick on generic article

Hello Expert,
I create a normal purchase order with generic article and variants.
Then, I do goods receipt with full quantity.
Delivery completed indicator is automatic set 'X' on variant items.
But with generic article, Delivery completed indicator is not set 'X'.
Do I miss any configuration ?
Please help me !
Regards,
Minh

Hi Minh,
as far as I know, this is a normal system behaviour and not an error or missing configuration.
The generic article in the goods receipt has a statistical character. No goods receipt can take place for the generic article. The goods receipt only takes place for the variants of the generic article and so the delivery completed indicator only gets set for the variants and not for the generic article.
Hope it helps.
Regards
Tobias

Delivery completed indicator is not coming in PO

Dear All,
I have two users A and B
In A user I am not abl to see delivery completed indicator in PO while is user B I am able to se it.
There is no screen varient used and also have not done any personal settings.
Regards,
Gitesh

Hi,
Normally for service POs delivery completed indicator is not reflected,
please check if your looking for service PO & normal PO by mistaken,
regards
chenna

Delivery Completed Indicator(ELIKZ:0COMPL_DEL) in 2LIS_02_SCL

Hi Experts,
I am using the datasource 2LIS_02_SCL for Purchasing reports and this extractor has the 'Delivery Completed Indicator'[ELIKZ] which is mapped to 0COMPL_DEL in BW. The ODS which in our system has the 0PROCESSKEY as one of the key fields. Hence there are multiple records for one PO item with different 0PROCESSKEY. However the 'Delivery Completed Indicator' is not correctly extracted. For example, for one of the PO items which are not marked as delivery completed in R/3, the records extracted are as follows:
Purch.Doc. Item( Deliv.date Pur Purc D
POD Doc             Item    Schedule Line Process Key Delivery Completed Indicator
3000000583          00001 0001               001
3000000583          00001 0001               002                X
The delivery completed indicator was set & unset in R/3. This is an issue with all the similar PO items. The indicator in not set for all the records. Is there any rule that only certain process keys should be considered to identify the indicator?.
Kindly help.
Regards,
Shilpa

Hi,
You can have more than these 3 depending on your system setup.
If remember correctly, everything ending with 1 is PO related, 2 is GR related and 3 is invoice related. So, for GR related records, look at Process Keys 1 (so you know the Line Item quantity), 2 for GR's, 12 (GR reversals or issues?), 22 (GR issues or reversals?).
Of course, with all things SAP, every system is different and you may have other keys you need to include. As someone else wrote, looking to the transaction key mapping for the movement types.
Also, you should ask the functional guys or the business (if there are no functional people) for all of the GR related scenarios for Purchasing. They should give you a list of 5 -10 scenarios on how material can be bought and brought into the system. With that list, run through each one and see what records are created and when. This will display to you how the system works and you can program based on the results. This will take a while, but will be very beneficial to you.
Brian

Deliver completed indicator is not getting updated in the PO item Overview

Hi Gurus,
We have the PO with quantity of 10 and it has been GR/IR, but the Delivery completed indicator is not getting updated (Checked).
The deliver completed indicator is selected in the config of t-code OMCD.
Also there is no tolerance limit is maintained.
Could you please suggest us why the indicator is not getting updating.
Thanks & Regards,
Sada

Hi check follwoing
1. Set Delivery complete indicator at plant leve
spro - mm --inventory mgmt ---Goods receipt --- Set delivery complete indicator
2. Control field selection for MIGO to disable users from changing it.
spro -- Materials Mgmt -->Inventory Mgmt -- Settings for enjoy Transaction -->Field Selection for MIGO
and chek this link
["Delivery Completed" Indicator
Regards
Kailas Ugale

"Delivery Completed" Indicator in Goods Receipt

Hi,
While doing GR, we want to check the "Delivery Completed" on the Goods Receipt Screen if we are expecting no future receipt against the Purchase Order.
Currently we are not able to check the Delivery Completed Indicator as it is not in editable mode.
Is there any issue if we enable the Check Box on Goods Receipt Screen. If no, how can we enable the Check Box.
Please guide.
Regards,

Hi
This is handled by the system automatically. you can change only in purchase order.
Refer SAP note 1093582 for more info
About delivery completed indicator functionality
The purchase order item is considered closed, even though the total
quantity may not have been delivered.
o Although a further delivery is not expected, it is still possible.
o At the time of the next goods receipt, the system suggests the item
as unselected.
o The purchase order item can be deleted, even if the total quantity
was not delivered.
Although the "delivery completed" indicator is not set, a purchase order
item is still considered closed if the full quantity has been delivered. In
this case, the "delivery completed indicator" is not required.
In Customizing for Inventory Management/Goods Receipt/Set Delivery
Completed Indicator, you can define at plant level that the "delivery
completed indicator" is set automatically in the order if:
o the total quantity was delivered
o the underdelivery or overdelivery lies within the tolerances
Hope it helps
Thanks/karthik

Delivery Completed indicator of Production Order

Dear Experts,
I met a problem. Our production order goods receipt is in the last operation with a automatic 101 goods movement control key.
I found that the production orde qty. is 8. And in some operation do scraping. The scrap qty. is 1. And at last Production Order goods receipt qty. is 7. So the production order should be set delivery completed. But why the delivery completed indicator can not be set by system. I need to do this by manually?

Hi,
Once a scrap is posted during confirmation, the ExpectYieldVar field in order header will be updated. So in your case it should be shown as 1-.
Check if you find the same. If not check how the scrap confirmation was posted.
If it indicates as 1-, then when you post the confirmation (Auto Final confirmation) for the last operation with 7 as yield, system will automatically flag the delivery completed indicator.
Revert if you face issues.
Regards,
Vivek

Delivery completed indicator not working..

HI SAP expers,
some purchase orders not getting chick mark of Delivery completed indicator ater receiving goods
i have PO with 100 qty . then GR 100 qty . but its not taking in the purchas eorder
Delivery completed indicator not check automaticalley. i did all the configuration in spro-mm-inventory-GR-indi extt...
most of th ePO or getting but some POs or not getting.. is there any settings behind MATERIAL MASTER or any .?
Regards,
Anthyodaya.

Try the following config..
1. Set Delivery complete indicator at plat leve
spro - mm --inventory mgmt -
Goods receipt -
Set delivery complete indicator
2. COntrol field selection for MIGO to disable users from changing it.
spro --> Materials Mgmt --> Inventory Mgmt --> Settings for enjoy Transaction --> Field Selection for MIGO
set field : "Del.Completed" Ind. GOITEM-MIGO_ELIKZ to Display

Delivery completion indicator not working

Hi ,
I am giving delivery completion indicator in the delivery tab of the PO thru ME22N and saving the PO . After that when I am trying to do GR it is allowing me to do GR. It is is not stopping me from doing goods receipt even after giving delivery completion .
Please help . HOw it can be sorted out.
Regards
Nandini

Hello nandini,
It is std SAP functionality. The Delivery completed indicator will Indicates that the item is to be regarded as closed.
The delivery complete indicator will just remove the said PO item from the open PO list. It will not object from further goods receipt if we try to do. The PO - line item whihc is marked as complete will not appear in any std open PO reports (ME2M / ME2L / ME2N with selection parameter as WE101).
If you dont want the users to make further GR to the PO, what you can do is that, mark the PO - item as delivery completed and also block the PO line item in Me22n. (Select the line item and click the lock icon)
Regards
Gregory Mathews

Not able to put delivery completed indicator in scheduleing aggrement

Hi ,
We are unable to put delivery completed indicator in scheduling aggrement . We are geting following message and its common scheduleing aggremnt and material don't have any stock and sub contracting order . Still what the point s we need to check in this case .
"Delivery completed" indicator cannot be set for item 00010
Message no. 06 848
Diagnosis
You have set the "delivery completed" indicator for a stock transfer item.
System Response
You can only set the "delivery completed" indicator in stock transfer items if
the sum of the goods issue quantities in the supplying plant equals the sum of the goods receipt quantities in the receiving plant
the sum of the delivery note quantities is equal to the sum of the goods receipt quantities.
Procedure
Cancel the "delivery completed" indicator."
RB

Is there an old/any STO pending.(Plant to plant delivery) of that particular item....
like Completion of stock transfers with GI qty > GR qty scenario....
plz check and revert back,if there is one plz close it and then put indicaor in SCHLD AGREE...

Not able to do GR for PO's , Delivery Completion Indicator Not Ticked

Hi ,
In SRM 5.0
Users Not able to do GR for PO's eventhough Delivery Completion Indicator Not Ticked , having Confirmation Roles
Either the PO is not appearing in the List or when they click the confirmation icon , the screen is not taking to the next screen to enter the quantity.
What all must be the probable reasons.
Thanks & Regards,

Hello,
You can check following things,
1. User in the PO should be correctly assigned in org without any sync errors(check users_gen)
2. Check in PO if the Confirmation/services performed tick is assigned properly.
3. Check if the PO in SRM and backend is correctly synchorinzed with PO in Ordered status.
4. Finally if there is any existing confirmation for the PO, then they can create the next confirmation only after the earlier conf is synchronized with backend, which means it would depend upon your schedule of clean_reqreq_up report.
Regards,
Sanjeev

Delivery completion indicator not getting checked after GR against STO

Hi All,
I am facing the following issues while posting GR against the Stock Transport Order -
Issue No. 1 - While posting GR against Outbound Delivery, I am receiving Error M7865
Issue No. 2 - While posting GR against Stock Transport Order, the deliver completion indicator is not getting checked in PO even if the GR qty. is same as OBD qty.
Can someone help me to come across these issues.
Thanks,
Pankaj

Hi,
Generally, in case of Stock Transport Order, Goods Receipt is to be done w.r.t. Outbound Delivery only. Otherwise, it will not update Delivery Completion and also will not update the Sales Document Flow as well as Po History properly. So, better try to resolve Error M7 865 and do GR w.r.t. OBD only.
To rectify error M7 865, check following;
Diagnosis: -
    The goods receipt for the delivery cannot be posted.
    The error according to the error code:
    1. The delivery does not exist.
    2. The delivery type is unknown.
    3. The delivery is not goods issue posted.
    4. There are no delivery items.
    5. The receiving plant could not be determined.
    6. The delivery items have already been goods receipt posted or contain zero quantities.
    7. Goods receipt(effect)movement type to goods issue movement type could not be determined.
    8. It is not currently possible to block the delivery.
Procedure: -
    Error code 1      : Check your entry.
    Error code 2,3,4,6: Check the delivery and its document flow.
    Error code 5      : The delivery must be related to a purchase order or the customer must be a retail business.
    Error code 7      : Check the settings for your movement types.

Change Button Not Active even after Delivery Completion Indicator is Remove

Hi ,
In SRM 5.0 ,Change Button Not Active even after Delivery Completion Indicator is Removed for Completed PO to cancel the GR or make changes.
Thanks & Regards,

Hi,
Please check these notes.
Note 1267916 - PO item flags do not stay checked
Note 1174982 - Return/deletion of confirmation does not update the PO flag
Thanks
Zameer

Delivery Completed Indicator Not Displaying in Purchase Order Screen

Hi,
Here clinet system has 2 document types for service orders. In one type of service order I can see the delivery completed indicator checkbox in purchase order screen & in other type of service order I am not able to see the delivery completed indicator chekbox.
I have checked the screen layout for both purchase order types & assignement of layout to both order types. In both screen layout types I found that Delivery Completed Indicator Checkbox as Optional Entry. System should display delivery completed indicator in both type of Purchase Order create/change/display screen. Then why it is showing in one type of service order and not in other type of service order.
Awaiting your reply.
Regards
Pradip

Hi Pradip,
You check the for your document type which field selectio is assigned in config
spro-MM-Purchasing-purchase order- define document types
And then go to
spro-mm-purchase- purchae order-Define Screen Layout at Document Level
select the field slection which is assigned to your document type and then go details and then double click the GR/IR and then select it as optional if it is selected as hidden.
Cheers
Chris

Delivery Completed Indicator - Open PO Quantity Issue

Hi All,
I have an issue relating to our Open Purchase Order Report. I have some POs which are appearing on the report eventhough they are marked, 'Delivery Complete' ie NOT open. The example of a PO is where the PO Quantity is 100 and the Goods Receipt is 99. The user knows that there will be no further deliveries and therefore marks the PO 'Delivery Complete'
In the Extractor to BI we have extracted this field ELIKZ 'Delivery Completed Indicator'. The structure of our datamodel is
PSA -> DSO (Write Optimised DSO) -> Cube
We calculate the Open PO Qty by taking 'PO Qty' minus 'Goods Receipt Quantity' I have checked the example PO in the cube & DSO. I can see that for the infoobject 'Delivery Complete Indicator' that it has been marked 'X' but only on the records relating to the Goods Receipt for this PO. The original PO record is added to the cube eg on 1st Jan and then the Goods Receipt record, including the delivery complete indicator is added to the cube on 31st Jan, but the original record is not updated by this indicator. Therefore at the moment I cannot use this to filter out records in my query. See below how it looks in the Cube;
Created Date - PO No - PO Line - Del Complete Indicator - PO QTy - Goods Receipt Qty
01.01.2011 123 10 (Blank) 100
31.01.2011 123 10 X 99
What should I do? How have you created this report?
Just to let you know I have already read the post Delivery Completed Indicator(ELIKZ:0COMPL_DEL) in 2LIS_02_SCL
Many thanks for your help,
Michelle

Hi Kalyan,
Thanks very much for your message,
In my case if the Order Qty is not equal to receipted this does not always mean that it is open. Sometimes the receipted quantity can be over or under (not equal) and the PO can be closed. What do you mean by confirmed quanity? Also, this is a Purchase Order report not a Sales report.
You have said...
"Then I would suggest to still keep the condition on the Net ord qty and Net confirmed qty and exclude the del compl indicator as X and also the status as open "
I don't understand how this will work. My issue is that the indicator is not on all the records of a PO only the receipted records.
Can you help again please?
Many thanks
Michelle

Delivery completed indicator is not working

Similar Messages

Maybe you are looking for