Delivery cost for Stcok transfer through M.type : 351
Hi Experts,
Can anybody explain how to capture the delivery costs for Stock transfer through M.Type 351.
Also kindly explain the steps involved in configuration of the same.
Thanks in advance,
Prabu
Hi,
Once the Config releated to Setup stock transfer order is done.
To include the cost you need to include the pricing procedure related to STO needs to be assigned to your schema group.
Goto SPRO -MM-Purchasing -- Conditions
Here you need to assign the Schema determination RM2000 to your Purchasing organization.
Then when you create the STO in the recieiving plant, then you will get the condition tab in the item details of STO, there you can maintain the delivery costs for that material & send the STO to your supplying plant.
Supplying plant will send the material through MB1B & with mvt type 351 to recieving plant.
At the time of Goods reciept system will capture the delivery costs in the recieving plant for that STO.
rgds
gsc
Similar Messages
-
Planned delivery cost for the scheduling agreement
Hi Experts
1. I have an requirement to post Invoice ver. for the Planned delivery cost (freight,customs duty,CVD etc) against the Scheduling Agreement just like Import Purchases with checking off the GR Based IV Indicator before doing the GR
I tried it but its giving me that no delivery costs are Planned in the Scheduling agreements it runs fine in case of the PO because PO is a time independent. Please inform how to post the same for schedule agreement with time dependent indicator on. I tried switching off the time dependent indicator and the system allowed, but my requirement is to Post I.V for the delivery cost with the time dependent indicator on.
Appreciate if you can suggest something in this case Urgently .
2. Aother issue is we have some uploaded Scheduling agreement from legacy system with Time dependent conditions. For this we need to post planned delivery cost in Miro. Since the system is not allowing to post, how to about for this. Shall we enter the delivery cost in unplanned delivery cost in Miro and post. Please suggest if any alternate solution is available.
Regards
ArvindHi,
As you know if the delivery cost document is not posted during GR the
delivery cost is not proposed during invoice (MIRO). Planned delivery
cost will be proposed in invoice only when there are records in EKBZ
table. The EKBZ table will be updated when delivery cost is posted
during GR itself.
Please ensure in the PO itself thatr the conditions have been defined
properly with the relevant amounts and values.
During GR when planned delivery cost conditions are present in PO,
system checks for values in amount field. Then only appropriate
calculations will be done for delivery cost and planned delivery cost
document will posted during GR and hence updates EKBZ table.
Solution to this issue is described in below steps,
1) reverse the invoice document
2) reverse GR document.
3) You have to give values in amount field in relevant conditions ZGDS
in the PO.
If you face any issues changing the values, delete above conditions
and put it again manually and give values in amount field also.
4) Post GR once again, delivery cost document will also be posted.
You can check it in PO history.
5) During invoice select Item + planned delivery cost and post the
invoice. If you need planned delivery cost to be posted separately,
then you can post individual invoice for item and delivery cost.
Please note it is not possible to post delivery costs for documents with
multiple accountassignments.
For your second question, I am afraid I can not answer. Please open a new ntry in the forum, so that someone else can answer it.
Best Regards,
Arminda Jack -
Is the standard delivery cost for calendar in UK really £7.19?
Is the standard delivery cost for calendar in UK really £7.19? I want two different calendars, already designed, and think £14.38 is a ridiculous amount to pay for postage......help please!
The shipping prices for the UK are listed here: The prices are really that high:
http://store.apple.com/uk/help/print_products -
Total Delivery Cost for partial Item delivery
Hi Guru,
I have a requirement wherein I have to apply the total delivery cost for partial Item delivery.
For example: Even if there is partial GR, delievery cost must be paid in full.
Say PO is for 100 PC and delivery cost is 100 EUR. Now at MIGO if the delivered quantity is 60, the freight vendor must still be paid 100 EUR.
Is this possible by configuration or do we need to make any changes at code level? If yes, Please guide me on how to do that....Create a PO without tick GR-Bsd IV, suppose I have created PO with qty 20 and rate 1 INR and give freight 50 INR (Fixed Amount)..
Then I have done partial GR for qty 5. My freight amount booked as 12.5 INR (for partial GR)
Then I have gone for MIRO..
Here select Goos/Service item + Planned delivery cost.
Enter the PO, you can see two line items appear..
One for goods and one for freight...
Goods will come as qty 5 and amount 5 INR and Freight will come as qty 5 and amount 12.5 INR.
Just change the freight qty and amount as 20 and 50 INR.
Then post the MIRO, you can see your total freight will be booked to vendor..
Now again do GR for qty 2, at that time your freight amount will booked as 5 INR.
Then when you will go for MIRO, you can see only the GR item, Freight qty and amount will not come at the time MIRO..
(Note : I have told the scenario as per my previous screen shot) -
Can't create a delivery order for stock transfer #
Hi All
I stuck with one ticket ...
Can't create a delivery order for stock transfer #
Kindly provide input to resolve this.
ThanksHi,
Can you tell us as to what is the issue here? What transaction are you using?
Anyways, check below things:
1. Check for the inputs which must be relevant for the delivery creation
2. Check if table VETVG is updated with the STO number.
Please revert back with more inputs if problem still persists?
Regards
SD -
Dear SAP Guru,
I need some advice how to do the following scenario.
In My Purchase Order there will be 2 material A dan B. And B is a free goods (no invoice receipt).
And in this Purchase Order there will be added some type of Delivery Cost.
How can I make this Delivery Cost to be distributed propotional to material A and B since in line item B no condition type are allowed to be added.
Please help.
Thanks in Advanced
Best Regards,
SugihartoHi ,
free goods Delivery charge
If it is imported free goods..please go through the following link
PO for goods free of charge
Regards,
Nani. -
Handling delivery cost for Assets
Hi Friends,
Can we have delivery cost in POs of Assets. How to handle these ?
Regards
Sai KrishnaHI,
Normally in asset procurement, the delivery of asset shall be handled by Third party transporter on freight to pay basis. In this case, you create a condition type by copying the existing condition type like FRA1 for freight ( delivery cost) and include the same in condition tab in PO and create a vendor master and assign the same by selecting the condition type of freight in details.
Now the freight will be captured and payment can be made to the freight vendor.
Regards
Ram -
Entering delivery costs in stock transfer order
I am entering delivery costs via a condition type in a stock transfer order. When I am doing MIGO, AUM key gets invoked which is a price difference key. How do I enter delivery costs in a sto order without the aum key getting invoked because really freight or delivery charges should not be hitting the price difference account
thanksUnderstood why system does that
-
Unplanned delivery cost for different Vendor
Hi,
For a import PO we need to pay OCTOI to Municipal corporation.
Unfortunately while PO creation the octroi condition was not entered.
Now we need to post a invoice for this and the condition is, we must post this to material.
We dont want to do direct FI entry as then this will not load on material.
Entring Unplanned delivery cost at the time of invoice will not be possible is the Vendor is different.
Any suggestions please...
RajeshDear Rajesh,
unplanned delivery cost is basically which not plan at the time of PO and it will be expected at the time of invoice.
you can enter extra amount in unplanned delivery cost, but check at the time of Stimulate which a/c is being captured.
The Unplanned Delivery cost is default in separate GL or in Stock Account depends upon the configuration.
check In SPRO ,Maintain settings as shown
MM---> Logistic Invoice Verification -->Incoming Invoice --> Configure How unplanned delivery costs are posted
Please check the below link for more information
http://www.sap-img.com/financial/unplanned-and-plan-delivery-costs-in-stock-and-gl-account.htm
Unplanned delivery costs in MIRO
Regards,
PK. -
Steps for File Transfer through FTPS...!!!
Hi ,
Can anyone please tell the steps for file transfer with FTPS.
Does PI file adapter has bulilt in feauture to handle this? or
Do we need to deploy anything to handle this?
Do we need to install any certificates by requesting from partner or It will do the encryptions/authentications on its own?
Any additional Steps we need to mention in File receiver adapter while we send the file through FTPS?
File is going through port 1090(unsecure connection) but it is not going through port (990) which is a secure connection.
Please suggest me.
Thanks
KrupakarHi Shabarish,
We got the certificate from the partner and loaded into the trusted CA's. I tried running by giving
Connectivity Security as "FTPS for Control and Data Connection" and Command Order as "AUTH TLS,USER,PASS,PBSZ,PROT"
Ip: XXX.YY.YY.ZZZ
Port: 990
User and pwd.
and I am getting the same below error
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: iaik.security.ssl.SSLCertificateException: Peer certificate rejected by ChainVerifier
I tried by selecting different options like
1. Without selecting the X509 certificate for client authentication.
2. Keystore as TRUSTED\view\entry-cert
X509 certificate and private key as TRUSTED\view\entry-cert
3. Keystore as TRUSTED\view
X509 certificate and private key as TRUSTED\entry-cert
4.Keystore as "view"
X509 certificate and private key as "entry-cert"
Please help me in this.
Thanks
Krupakar -
Unplanned Delivery Costs for separate freight bill
Hi !
We have a scenario where the freight vendor is different from the PO vendor. When we are posting MIRO for the freight invoice and there happens to be unplanned delivery costs, we are not able to post them to the inventory.
Any help/advise appreciated.
Thanks,
Anisha.In this case, you are posting MIRO to the freight vendor, so you have post the unplanned delivery cost to the freight vendor or freight G/L.
Other way:
To post this unplanned delivery cost to the Inventory, bring that unplanned cost into picture when you are doing MIRO for the Inventory PO, not at the time of posting MIRO to freight vendor -
Planned delivery cost posting in MIRO through IDOC_INPUT_INVOIC_MRM
Hi Experts
I came to know from the OSS Note 119092 that the planned delivery costs can not be posted for logistics(MM) incoming invoice throgh inbounf Function Module IDOC_INPUT_INVOIC_MRM.
I just want to know whether this problem is rectified in ECC 6.0 or still this problem exists?
Awaiting for your earliest response.
Regards
MohamedHi,
There is a modification note that is released.
1386272 EDI: Planned delivery costs..
If you require this functionality please raise a message with SAP..
Since this is a Pilot note release for few customers.
regards,
Lalita -
I need to pick po amount+ delivery cost for bill of lading in miro
i have a requirement from customer by using miro tcode when they select use bill of lading it shoud pick po amount and delivery cost default it is picking delivery cost.plz give me solution for picking both amounts
can anyone suggest me an idea can go for badi/ exit or implict enhancement.plz give a solution
Moderator Message: You have asked the same question with a different UID here: Re: Facing a problem in miro Well, looks like its time ban you from SCN.
Edited by: kishan P on Aug 5, 2011 11:43 AMi have a requirement from customer by using miro tcode when they select use bill of lading it shoud pick po amount and delivery cost default it is picking delivery cost.plz give me solution for picking both amounts
can anyone suggest me an idea can go for badi/ exit or implict enhancement.plz give a solution
Moderator Message: You have asked the same question with a different UID here: Re: Facing a problem in miro Well, looks like its time ban you from SCN.
Edited by: kishan P on Aug 5, 2011 11:43 AM -
BAPI for Goods Issue (MIGO) movement type 351 with reference to PO
Hi,
Is there an BAPI for Goods issue in MIGO with reference to PO movement type 351, i tried using "BAPI_GOODSMVT_CREATE", but there is no PO field in this, is there any other BAPI's available for the same?
Thanks in Advance,
Santoshfor goods mvt type , the available is that itself . for 351 mvt type Po number is not required .
if its a must , create a Z bapi with additional field for PO and make it as reference . -
Message type for data transfer through ALE
Hi Gurus,
I am working on master data transfer throgh ALE.We want to transfer data from Dev. server to Quality server.Here the client is same that is 123.We have defined logical systems and RFC also.Now for transferring inspection characteristic what is the message type that should be used in transaction BD64.please help.
Regards
Amitnot found any replies
Maybe you are looking for
-
I cannot launch bridge from photoshop cc 2014
I cannot launch bridge from photoshop cc 2014
-
Baseline Date error in Billling
Hi, While billing a document, I got the error "Baseline date for payment not permissible - correct this date" : The specified baseline date for payment is more than 99 years after the current date. Could anyone tell me what could have gone wro
-
Assigning of Classes to superior classes Using SXDA_Tools...Urgent
Hi All, I have a requirement in which i have to create classes(Material classes, CL01) and subclasses for them. In the second step i will have to assign the created sub classes to their respective superior classes. I could create classes using batch
-
Photos sync with PC computer instead of iCloud
iTunes 12 is no longer sync photos with my PC computer using Windows 7. I have very large photo collections to show my family, relatives and friends. I don't want any photo on iCloud due family privacy. also iCloud do not support folders on phot
-
Windows Server 2003 R2 32bit keeps unexpectedly rebooting - System Stop Failure
Good morning all, I am currently having a very difficult time with my servers running Windows Server 2003 R2 32Bit SP2. I have had this server running over night last night and to come in this morning to find it has rebooted 4 times due to unexpected