Delivery could not be created

Hi Experts,
We have several POs type UB stock transport order from plant XXXX to YYYY. For some products in those POs delivery could not be created due to Sales status of material on used sales org.
Even though that delivery could not be processed, shipping notification has been created and shipment as well. This means that goods are in transit to plant YYYY but could not be goods receipted against PO as no delivery and goods issue have been done.
Now status has been changed in sales org .
Thereafter we try to create delivery via VL10D but it is not possible as not stock is available as in transit.
How could delivery be created in order to be able to PGI and PGR?
Regards

hi,
this is to inform you that,
you can see * the deliveries that could not be created*: in VL06F you will find in STATUS OUTBOUND DELIVERIES FUNCTION.
you can see * successfully created deliveries* : in VL06F you will find in STATUS OUTBOUND DELIVERIES FUNCTION
in the above you will find 4 options
NONE: not relevant.
A: not yet processed
B:partial processed
c:completley processed.
take a pick of the options which ever you want to you can find out.
regards,
balajia

Similar Messages

HT201269 When I try to setup my new iPad air, I go through all the steps for the iCloud sign-in and choosing security questions and what not. But after I hit the agree to the terms and conditions... It says Apple ID could not be created because of a serve

When I try to setup my new iPad air, I go through all the steps for the iCloud sign-in and choosing security questions and what not. But after I hit the agree to the terms and conditions... It says Apple ID could not be created because of a server error. Have no clue what to do... I've restarted the iPad and get the same message. But my internet works just fine.

1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

I am having issues with Time Machine. Error message "The backup disk image could not be created.

Error message "The backup disk image could not be created." I have tried everything I have found online in the community from TM full reset to changing my computers name. Anything else I can try? I am using a Seagate external HD with a connection through my router. I spent an hour on the phone with seagate and everything is ok on the HD end.
TM sees it and it is mounted but cannot go any further. HELP?!!!!
Thanks
-A

How should it be connected? It has a usb port and ethernet. The USB on the ExHD looks like the port on the back of my computer, so I would need one wth the same ends? Do they make those?
I can usually fix most my comp problems myself, but this new ExHD has stumped me.
Thanks for your help.
-A

I'm having trouble backing up my second macbook to a new time capsule. continue to get an error message -- "Time Machine Error. The backup disk image could not be created." Is there something I need to change in my time capsule or time machine?

I just set up a new time capsule. it worked fine on my first macbook. But now I cannot backup my second macbook. Getting "Time Machine Error" "The backup disk image could not be created." Do I need to change settings on my time capsule to allow the second computer, or do I need to change something on the computer to allow time machine to work right?

Try #C9 in Pondini's Time Machine Troublshooting
http://pondini.org/TM/Troubleshooting.html

PO could not be creating using the Enjoy-BAPI

Hi expersts.
I have a problem with BAPI function module BAPI_PO_CREATE1. When program will generate orders for several suppliers for one supplier "PO could not be creating using the Enjoy-BAPI" and "Purchase order item 00010 still contains faulty schedule lines" and
"Source not included in list despite source list requirement" messages occur. Order won't be generated.
When I am generating order only for that supplier, everything is fine. They are generated and no messages are displayed.
Could anyone help me ?
Thanks, regards.
Dan.

Hi expersts.
I have a problem with BAPI function module BAPI_PO_CREATE1. When program will generate orders for several suppliers for one supplier "PO could not be creating using the Enjoy-BAPI" and "Purchase order item 00010 still contains faulty schedule lines" and
"Source not included in list despite source list requirement" messages occur. Order won't be generated.
When I am generating order only for that supplier, everything is fine. They are generated and no messages are displayed.
Could anyone help me ?
Thanks, regards.
Dan.

Training & Event Management Course type ** could not be created Message no. LSO033

Dear Gurus;
I'm trying to record a Business Event Group through S_AHR_61011889 - Business Event Group , then a Business Event Type through S_AHR_61011888 - Business Event Type.
Actually when I'm recording the data of the Business Event Type then I save i get a message stating
Course type **** could not be created
Message no. LSO033
to be able to save the event type I have just to record its name and the capacity then after saving I have to select change "F6" and record each data infotype separately, something which is not logical for the users.
Even when they make change and record the remaining Infotypes like the description then they select display what they've recorded doesn't come
Does anyone know how can I fix this?
Thanks in advance.
Best Regards;
Lobna

Dear,
Looks like has issue in authorization access, verify and fix it.
Regards,
TG

Is there a way to fix 'Sent mailbox could not be created?'

I have OS 10.8.5 and am using Mail as the mail program, since November. I have not had this problem before. I have four accounts in mail, iCloud, Gmail, Roadrunner and Earthlink. The main one i use is Gmail. Today i noticed that there was an exclaimation point next to my Gmail Sent mailbox. i opened the mailbox and it showed only one sent message that i sent earlier today. There should have been a few months of mail in the mail box, maybe 30 to 50 messages. i clicked on the exclaimation point and the message said:
The Sent mailbox could not be created on the mail server. The local "Sent Messages (Gmail) mailbox was created instead. Mail has changed your account's Mailbox Behaviors preferences to use the local "Sent Messages (Gmail)" mailbox.
i don't know what this even means. My other account mailboxes have their mail in them, only the Gmail mailnbox is not created (although it does have that one message in it). There wasn't anything different i did that would change any preferences that i know of. I see the Gmail Sent messages mailbox at the bottom of the mailbox list and the missing messages are there, but instead of listing the name of the recipient under a To: column, instead there is a From: column, and my name is all that is listed. There is no To: column. I need to know who the messages were sent to if i need to search for one later. i want the recipient to be idendified in the header, as it is in my other Sent mailboxes.
There is one thing that happened right before this occurred. I got a brand new Time Capsule and replaced my very old Airport Extreme with it. I didn't change anything. i just replaced the old base station with the new one, keeping all settings, network names and passwords the same, i just switched the hardware.
After setting up the Time Capsule, when i checked my email, i found this problem with my Gmail mailbox missing.
I found this problem raised in a few other postss on these discussion forums, but there was little or no discussion on the threads. None of them mentioned a new Time Capsule. i'm hoping someone who reads this can say what might have caused this and where the mail box is, and how to get it back.

Glenn--thanks for the reply. I think i tried your first suggestion---i highlighted the Gmail account Sent mailbox and went to the Mailbox menu, went to 'Use this mailbox for,' but all of the four options were grayed out (Sent, Junk, Trash, Drafts). i tried highlighting (or selecting) other mailboxes in the column on the left, including the ones on the server and the ones 'on this mac.' No matter which one i selected, the options were grayed out. Do you know why they would be grayed out? Am i not understanding what to do, or is there some other reason? i'm in Classic mode, in case that matters as to what's in the left column.
I have not yet tried disabling the Gmail account. i was going to, but when i went to Preferences > Accounts > Gmail, i saw and remembered that i had changed one of the settings not long ago, a week or so--where it says "Use only this server" under Outgoing Mail Server (SMTP) i had unchecked 'use only this server,' since none of the other accounts had that checked. So i rechecked it and am wondering if that would protect against what happened.
I feel nervous about disabling the account and removing it from Mail and wanted to ask you, will everything come back when i re-enable it?
Thanks

COREid Federation Error: A local user session could not be created for the

Hi,
I installed two instances of COREid Federation in my machine. Also installed SiteMinder and LDAP. Source Domain of COREid (8101) uses LDAP as IdMBridge and Destination Domain (9101) uses SiteMinder as IdMBridge. I am trying to access the resource protected by the SiteMinder from the source domain using the URL which is constructed using the pattern given in the PDF:
http://mymachine.domain.com:8101/shareid/saml/ObSAMLTransferService?DOMAIN=DestinationDomain&method=POST&TARGET=http://mymachine.domain.com:8887/Source/Source.html
Assertions are generated and I can see the assertion in the Source domain and transferred to the Destination Domain.
I get the following error in the Destination Domain Shareid Log file:
ERROR - [http10113-Processor3] - RECEIVER: ERROR: A local user session could not be created for the assertion
Please help me to solve this issue?
Note: The Web agent runs on the web server instance 8887.
SiteMinder is able to protect the resource when accessed.

Typically that error occurs when the destinations access management system can't find the user based on the SAML attribute. Check to make sure that the attribute that you are matching on matches exactly.

RFC destination BW could not be created in the source system R3073

I'm creating a source system for our BW (version 7.0) dev client.I'm linking it to our R/3 4.7 QA client. From RSA1 I select create source system, I enter the system information and in the next screen I'm prompted to log on as system administrator. I'm in QA now and the system automatically crated the RFC connection. I test the connection and it runs ok. I log on to the BW client from QA and it logs on just fine. When I exit the screen I get the following message:
RFC destination BW could not be created in the source system message number R3073
Why is this happening? The connection tests just fine.
I'm using RFCREMOTE user in BW and ALEREMOTE in QA with the same password
Any ideas?
thanks

Hi,
I cannot tell you surely the settings for SCC4 now (I can't connect to my sys).
Nevertheless, create your R3QA RFCDEST manually in your BWDEV with SM59.
Create your BWDEV RFCDEST manually in your BWQA .
Perform test and authorization test within SM59 from both sys.
When creating the source system in BW the system will detect the RFC and ask you if you want to use it; accept an proceed the the rest of the procedure.
hope this helps...
Olivier.

SHAREid - A local user session could not be created for the assertion

Problem: We have a client trying to federate to our environment using POST profile but we are getting the following error, "RECEIVER: ERROR: A local user session could not be created for the assertion".
I verified that the user exist in the directory and I am able to execute a test successfully as that user.
Thanks.

There is a requirement that the client needs to send an attribute called "traveler" in the assertion. We found out that the problem occurs only when client sends a attribute in the assertion. When the assertion does not include the attribute, there is no issue. Not sure why that is the case as we have other clients sending the same attribute in the assertion.
Here is the AttributeStatement.
<saml:AttributeStatement xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><saml:Subject><saml:NameIdentifier Format="urn:oasis:names:tc:SAML:1.1:nameid-format:unspecified">XXXXXX</saml:NameIdentifier></saml:Subject><saml:Attribute AttributeName="XXXID" AttributeNamespace="http://schemas.xmlsoap.org/claims"><saml:AttributeValue>XXXXX</saml:AttributeValue></saml:Attribute></saml:AttributeStatement>
It does not have <saml:SubjectConfirmation> and <ConfirmationMethod> element. Can that be a problem?
Thanks,
Vinay
Edited by: user504421 on Jul 9, 2009 2:17 PM

ORA-20100: AppDomain could not be created for the specified security level

We recently updated our development environment to Visual Studio 2010. We have previously deployed (with success) .Net stored procedures from Visual Studio 2005 to our Oracle 10gR2 database. I am currently trying to configure a local instance (called local) of Oracle 10gR2 database to test deployment of .Net stored procedures to Oracle 10gR2 via Visual studio 2010 and ODT version 11.2.0.1.2. I have built the demo from the ode developer guide and gotten as far as deploying it but executing the stored procedures from VS 2010 or SQL*Plus produces the following error...
ORA-20100: AppDomain could not be created for the specified security level
ORA-06512: at "SYS.DBMS_CLR", line 152
ORA-06512: at "SCOTT.GETDEPTNO", line 7
Here is what I have done.
(Server)
1. Installed oracle 10gR2 with ODE.Net
2. Installed Oracle 10gR2 patch set 22
3. Installed ODE upgrade from Oracle Developer Tools for Visual Studio .NET with Oracle 10g Release 2 ODAC 10.2.0.2.21
(Client)
4. Installed Oracle Developer Tools for Visual Studio .NET with Oracle 10g Release 2 ODAC 10.2.0.2.21 (In new client home).
5. Installed patch set 22 on 10g client home.
6. Installed Oracle 11g Release 2 ODAC 11.2.0.1.2 with Oracle Developer Tools for Visual Studio(in new 11g client home, only for VS 2010)
I have made some minor changes (GAC) etc. per the following threads...
ODE.NET 11.1.0.7.20 on 10g Database?!
Re: Error: System.TypeInitializationException
The database appears to be fully functional via TOAD - SQL plus etc. I can't find much on this error but it appears Oracle needs some permissions to launch an ASP.Net application that it does not have. Any help would be GREATLY appreciated, don't hesitate to ask for additional details.

The KB article is almost what we have apart from theitalic underlined
part
Consider the following scenario:
You use a domain administrator account to log on to a computer that is running Windows 7 or Windows Server 2008 R2.
You use the Active Directory Users and Computers Microsoft Management Console (MMC) snap-in to connect to a domain controller.
You open the Properties dialog box of a user account.
The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
You set the Remote Desktop Services Home Folderattribute to the shared folder path.
NoteThis attribute is located on the
Remote Desktop Services Profiletab.
You click Apply or OK.
In this scenario, you receive the following error message:
The home folder could not be created because: The network name cannot be found.
Note If you click Apply or OK again, no error message is returned. However, the setting is not saved.
I think the important bit is
The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
We manually create the shares on our NAS and then just want to enter the path in the profile tab, I suppose the question is how to we stop it trying to create the shares ?

When I try to open a project, the only option for a new track is for external MIDI device; when I try to open an audio or software instrument track, I get an error message saying that "the specified number of tracks could not be created. Reduce the n

When I try to open a project, the only option for a new track is for external MIDI device; when I try to open an audio or software instrument track, I get an error message saying that "the specified number of tracks could not be created. Reduce the number of tracks to create and try again." I didn't specify ANY number of tracks. Thanks for help!

Ah.. then I suspect you just need to go to Logic's prefs/Audio and check CoreAudio...
It has been unchecked somehow...
Also.. as an aside.. Be careful not to create such large subject names in future when posting here.. They can cause issues with replying to posts in such threads.. due to a bug in the forum software.. so please keep them short and to the point...
Cheers..
Nigel

RFC Destination could not be created in TREX administration tool

Hi All,
Recently i installed the TREX server, I am trying to connect the ABAP system with the RFC connection. I entered all necessary data for the RFC connection it giving error as
RFC Destination could not be created.
To solve the above problem i created one RFC connection of type TCP/IP in ABAP server eventhough it is not solved.
Can i have the solution for the above problem?
Regards,
Vivek.

Hi Michale,
Thanks for your quick response; I tried all the mentioned possibilities in that help document, still i am facing the same problem.
It is giving the below error
Connect to SAP System failed.Possible reasons:
-Logon data incorrect
-Password is not uppercase(must also be uppercase)
-SAP system user locked
-SAP user not in specified client
-SAP User rights are insufficient
-SAP system not reachable
-saprfc.ini unavailable or entries incorrect
-TREXTcpipClient.ini section[communication],parameters rfcdestination, sapsystem not set
-SAP system Basis component below 6.20 or SP too low
-->check also latest TREXTcpiplient trace file entries.*
The above all are check by me everything is fine.
The below information from the saprfc.ini file
DEST=NPI
TYPE=B
MSHOST=server1
GROUP=server1_group*.
Is there any mistake, please let me know.
Regards,
Vivek.

RFC destination BW could not be created in the source system

Hi,
Recently I installed BI 7.0 on Win 2003 and try to create a SAP system in RSA1.
I try to connect R/3 system (on UNIX) and getting RFC connection error u201CRFC user logon failed. Check the connection.u201D & u201CRFC destination BW could not be created in the source systemu201D. However, I test the connection and it is working fine.
Please suggest the solution.
Regards,
Rajesh

Rajesh,
Answer is very simple. I did get same kind of problem. It is very simple answer depending on your R3 version.
Use password all capital letters. Don't include any small letter at all. unlock your user id and change password to capital letter. BW doesn't like small and capital letter mix. this bug is fixed in ECC 6.0
<removed_by_moderator>
*Do not ask for points
Read the "Rules of Engagement"
Regards
RK
Edited by: Juan Reyes on May 21, 2009 9:30 AM

PARCONV phase Index could not be created ERROR

Upgrading Solution Manger 3.2 to 7.0 Windows Nt SQL Server 2000
We are in teh PARCONV phase now and getting errors regarding tables with missing indexes.
Example from PARCONV.ELG file:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CONVERSION ERRORS and RETURN CODE in NCONV00.TS3
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2EEGT236 The SQL statement was not executed
2EEDI006 Index " " could not be created completely in the database
Long text:
    Cause
      It was not possible to create the index in the database.
      This could be caused by the fact that an index with the same name
      exists in the database, but it is unknown to the ABAP/4 Dictionary.
      Activating the index in the ABAP/4 Dictionary is possible, but it is
      not possible to create it in the database.
    System Response
    What to do
      For more information about the cause of the error, analyze the SQL
      error messages in this log.
2EEGT221 Creation of secondary indexes for table "BBP_PDHGP" failed
Long text:
    Cause
      There might be a SQL error.
    System Response
    What to do
      Check the SQL codes for errors.
2EEGT239 Error in step "BBP_PDHGP-STEP6"
2EEGT094 Conversion could not be restarted
Long text:
    Cause
      The conversion could not be restarted, i.e. it was not possible to
      continue the conversion at the point where it was interrupted.
    System Response
    What to do
      Information about the cause of the error can be found in the restart
      log.
2EEGT236 The SQL statement was not executed
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I have gone into se14 the index name exists but the index doesn't exist on the database. I've tried using the Create to create teh index on the databse but that fails with a name may already exist.
How to I clear these errors?
Thanks
Laurie McGinley

It appears on all the ABAP Dictionary: Restart Log List, that the same error is occuring on creating the secondary indexes...
Database error 170 at EXE
Line 1: incorrect syntax near '('
Same error occurs if I use the SE14 to "Continue Adjustment".
Note 1180553 u2013 Syntax error 170 during index creation on SQL 2000 and
Note 1346662 u2013 Avoid index creation errors in 7.0 EHP and higher upgrades.
Note 1365755 - Scripts to fix fillfactor issues on SQLServer 2000
These seem to be the key.... but...
I ran the scripts in 1180553 ... no change in the errors. In fact, there isn't a dbo.[TATAF~] table and the dbo.[TATAF] table doesn't have the 'With fillfactor" entry. So i wonder if I'm at a different phase?
I'm looking at 1365755 and think I'd like to give that one a try, but it says to unpack the ZIP file in the <upgr dir>\abap\bin directory. Well there isn't one. I have the upgrade dir \usr\sap\put and its subdirectories, but no \abap\bin dir.
So I'm not sure where to unpack this to give it a try.
Perhaps it would be better to go back to teh beginning of the UPGRADE (after PREPARE) and start again?
I didn't upgrade to SQL Server 2005 because the version of SolMan we are on isn't certified on it, so thought I'd get through the Sol Man upgrade then do SQLServer 2005... maybe need to rethink this to?
I'm open you suggesions, ideas, answers!
Thanks
Laurie McGinley
Edited by: Laurie McGinley on Sep 28, 2009 12:23 PM

Delivery could not be created

Similar Messages

Maybe you are looking for