Delivery created even GTS block

Hi All,
I have created sales order with 2 materials,while saving the sales order system shows GTS block pop up,when i try to create delivery system allow me to created delivery,if we can see the below screen in the two materials one product has no GTS block and 2nd material have GTS block ( legal control),can any one please light on this, what should be done to prevent to create subsequent doc in this case
Regards,
Sravan

Hello
Copy control level you need to ensure item level GTS relevant routine in ECC, whether you assigned, .

Similar Messages

Purchase order is creating even for blocked vendors

Dear Friends,
FI guys have blocked the vendor for some reason.
But when we select the blocked vendor in PO creation screen (ME21n), it allows us to create the PO without showing any error message. Based on that, even it is allowing to create service entry sheet/GRN document number. Only during MIR7/MIRO invoice entering stage, it is showing the error message.
Could you please let me know how to resolve this issue at the PO creation stage itself - any sap note number/workaround procedure/providing any error message etc.,
Regards,
Dwarak.

FI team might have blocked at company code level.
However it will allow you to make PO's but you cant make the payment against that vendor.
If you block it at PORG level you ll not be able to do the Po's anymore.

Delivery is created even if there is no stocks

Hello All,
Pl find the issue as follows.
In our tranship process, a sales order for a variant config material is placed on a distribution warehouse. This creates a stock transport order to be placed on the production plant to produce and send the product to the warehouse. On the delivery creation date for the STO, a delivery will get created even if no stock is available at the supplying plant. It should only be created if the material has been produced. Also, once the delivery is created, neither the STO or the delivery shows on the stock/requirements list at the producing plant, and the demand is no longer relevant for MRP.
We checked for the Checking group,Checking rule and scope of check.
Thanks in advance.
Ulhas

Thanks a lot for the answer.
Pl guide me for the check you mention @ "RLT indicator set in the requirement type".
Actually what we though was that system could not found the transfer of the requirements
Pl correct me for the following.
In order to carry put an availability check in the delivery, the delivery needs to find a requirement class.and to do this,the delivery first needs to find a requirement type.This we maintain in Transaction OVZI. So this entry was missing for a particular item category at your end.(it was not maintained for That item category and mrp type PD )I think system will search for the requirement type here.
Next is requirement class should be assigned to the requirements type in transaction OVZH and the requirement class is defined in transaction OVZG where ATP check and requirements transfer can be activated.
Pl suggest.
Thanks in advance.
Ulhas

Error when creating VLO1N: u201Corder blocked for delivery as a result of credi

Error when creating VLO1N: u201Corder blocked for delivery as a result of credit checku201D.
Observations @ FD33:
Credit limit     :     3,50,000.00
Receivables     :     1,53,903.94
Credit exposure:     1,55,185.17
Current sales order value:
Net: 43127.74
Tax: 7331.72
Total sales order value : 50,459.46
Sales order created on : 18/8/09
Horizon                      : 2/9/09
Risk Category                : HRR (High Risk Re-check)
====================
Need to know:
Tax amount is also included in the credit check?
Is the total sales order value: 50,459.46 is included in the Credit exposure value?
If it is not included then the total will go beyond the Credit limit value. Fine the block is ok.
If it is included in the Credit exposure, then the total amount will be 3,09,089.1. Which is less than 3,50,000. So credit check should not happen.
But it is blocked and the error is through as u201Corder blocked for delivery as a result of credit checku201D.
Please let me know the reason & what other checks I have to look on.
So that I can provide the reason for this action.
Thanks in advanceu2026

Hi,
Generally total value of the sales order is considered for the Credit management.
Now if you want tax should not be included for the credit management.
Then you have to make small changes in pricing procedure.
Go to V/08 and select your pricing procedure and go to control data.
Check out the setting where your grand total is happening.
In the subtotal column you will find out A has been put up.
This A trigger the credit exposure of the credit management.
So if you want that tax should not be included then, check out where your total net value has been calculated before tax.
Over there put the A in the sub total column and remove it from the previous setting.
Save this setting now check whether the credit is happening including the tax or not.
Regards
Raj.

GTS block for return purchase order

Hi,
Our ERP system is integrated with GTS system. After creating a return purchase order in ME21N the order is blocked on 'Sanctioned Party List Screening' and 'Legal Control'. However, it is still allowing to create return delivery with movement type 161 in VL10B even if the GTS block is not released.
We need to build control to stop allowing to create return delivery if the order is blocked in GTS. Is there any standard way of controlling this or we have to custom develop it? Kindly guide me on how to achieve this.
Thank you,
Ranjith

Hi,
VL10B- is the PO due for delivery.
Find the standard process for VL10B
Stock transport order is also a Purchse order type only When you do STO via SD Route (via delivery.picking, pgi etc) then Shipping tab must appear in your PO Then only it is possible to do via SD Route For shipping tab to appear in PO there are some necessary configurations to be done in SPRO This is done under img- -purchasing- -set up STO 1.Define shipping data for plants 2.Create checking rule 3. Define checking rule 4.Assign delivery type and checking rule 5.Assign doc type,one step procedure and under delivery tolerance These five are important activities Enclosing here with a model settings study this and understand and then configuration will be more easy Sales area 0003, 04, 21 plant is 1002 Sales area 0004, 05, 21 plant is ABCD If you transport material from 1002 to ABCD plant then 1002 is supplying plant and ABCD is receiving plant Now this ABCD plant should be made as a customer in XD01 mainly with shipping conditions in that data in sales area 0003, 04, 21 and this internal no has to be noted In STO the receiving plant is being made as a customer in the supplying plants sales area and the internal customer no has to be assigned In- -mm- -purchase order- --define shipping data for plants Now in that img activity that i mentioned above against plant 1002 you have to give sales area as 0003, 04, 21.
Ashish

Delivery created without Stock

Hi all,
I'm using Function Module SHP_VL10_DELIVERY_CREATE to create a delivery
with reference to Sales Order. Everything is working fine, with one exception:
The delivery is always created, even when the salesOrder is block without stock confirmation.
If i try to do it, with va02, menu SalesDocuemnt->Delivery the system gives the correct error, saying "No schedule lines due for delivery up to the selected date
" wich is correct.
Does anyone knows why the FM doesn't work like the standard?
Thanks,

Hi,
Good morning and greetings,
Please go through the following SAP OSS Notes
Note 192423 - Delivery Processing Performance: Consulting
Note 415716 - User exits in delivery processing
Please reward points if found useful
Thanking you
With kindest regards
Ramesh Padmanabhan

Delivery created with out stock

Hi folks,
Sales order has been created for 'X' material,but there is 0 stock available for this material "X", ATP has been carried out and has proposed a further date, but when try to create a delivery,delivery documnet has been created even though there is 0 stock ( no stock ) for material 'X'.
How is this possible..................? actually SAP doesn't allow to create a delivery with out stock.............
please suggest.................
points will be rewarded................

Hello,
The system will allow you to create a delivery even if there is not stock. But it will not allow you to create post goods issue until the stock available in the storage.
I think there are user exits to prevent system to create the delivery if stock is not available.
Prase

Even though block popup windows is unchecked in content tab of options, I am still not getting any popups. Please help me.

Hi - Even though block popup windows is unchecked in content tab of options, I am still not getting any popups. Please suggest how to over come this problem.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Did you make sure that your security software isn't blocking the pop-ups?
Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test.
*http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/

Oracle Forms - How can I create a Data Block with query

Dear friends I have a question, I couldn't do this..
I have a sql query, I want to show the datas of the query.. How can I do this. ?
Data Block Wizard wants a table, view or stored procedure, but I have a query, how can I create a data block with my query.. I m waiting your helps..? Please...
Semih

Hi,
You have two options
1. create a view and base the block on the view
2. create a block with a query Data Source Type of 'FROM clause query'
Hope this helps
Neil

Delivery date getting calculated wrongly in delivery created via VL10D

Hi Gurus,
We have a strange issue, where in delivery date is getting calculated wrongly for replenishment delivery created via VL10D.
When we are creating via VL10D , delivery date is getting the additional 30 days from MaxDlvCrteDate . With initial investigation i see that VL10D has delivery creation profile 0101 for which no of days maintained in max delv creation date is 30 .
I assume that the delivery date is getting the additional days from delivery creation profile felid no of max delv creation date .
I have created the delivery on 24.03.2011, as per the route no of TL time is 9 days , So Ideally the delivery date should be 04.04.2011 , however system has calculated it as 23.04.2011
Delivery no No of days in MaxDlvCrteDate Delivery date
213443158 30 23.04.2011
If I create the delivery for the same PO using t-code VL10B, then delivery date is calculating correctly.
Not sure why system behavior is strange.
Please help me with your inputs to resolve the issue..
Thanks in advance

Please request one Abaper to solve this problem.
You cannot due nothing as the problem is in Code.
Regards
William

I created a new library so I can use it for just my music, but now my ipod will only sync to my old library and not the new one I created, even though I'm in the new library when I open itunes. Any solutions?

I created a new library so I can use it for just my music, but now my ipod will only sync to my old library and not the new one I created, even though I'm in the new library when I open itunes. Any solutions?

The point is that there are four i product users for one computer in my house, and not everyone wants the same music on their device. Like I said before, the ipod is not syncing to the new library even though I plug it in when the new itunes library is pulled up. It keeps syncing to the old library...

Promise to Pay not creating a dunning block

Hi,
I inserted the dunning block in config in the 'Make Settings for Promise to Pay', however when I create a promise to pay 9even when its broken) the dunning block does not update the line item (where i would have expected it) nor does it update the amster record. We also have BTE 0001765
Has anyone come across this before and can you point me in the right direct for this to work, thanks
Eoin

sounds like it is working according to the SAP Help from F1
Dunning Block for Items with Open Promises to Pay
Use
Has the effect that no dunning notices are sent to a business partner for an item if there is a promise to pay for the respective invoice and the promise to pay can be kept within the agreed deadline. The tolerance days are taken into account.
Dependencies
If you have entered a dunning block, during the dunning run, the system checks whether there is a promise to pay that is not overdue for the invoice of an item to be dunned. If this is so, the system excludes the item from dunning using the dunning block entered.
You can reset the dunning block when you are processing the dunning proposal. Therefore, we recommend that you create special dunning blocks for promises to pay. This enables you to differentiate these items when processing the dunning proposal.
Technical information
The integration with dunning is implemented with Business Transaction Event 00001765 (Publish and Subscribe). The event can be implemented more than once. This means that you can influence the system behavior delivered by SAP without modifications.

I want to create new popup block screen in CO11N SCREEN for condition check

in standard CO11N screen after completing filling the required field , when i click the save icon I NEED TO CREATE THE POBUP BLOCK SCREEN FOR CONDITION CHECKING WHICH CONSIST
YES NO CANCEL
IS THERE ANY FUNC MODULES TO DO THIS? OR IS IT POSSIBLE BY CODING?

Don't rely on 'Preview'.
Share/Export as .ibooks file and then drag that to iTunes and sync to your iPad.
Still no joy, find a pre-processing recipe ( that includes export for iPad) that doesn't spoil the quality in the process.
Just keep in mind that low quality in means low or lower quality out, in this example.

Delivery Created with out Material Number

HI
I created an STO for material, when i have done the VL10B i got a message "See log for information about creating deliveries"
A Delivery got created with out the Material number, When i look in the Document Flow for the Delivery Created its preceding document (PO) is not linked
In the log information i see an error, Please advise
Diagnosis
The sales unit is not allowed for the material in item
    000001.
System Response
The system does not allow further processing of this item.
Procedure
Check your entry.
    Select a sales unit which is defined for the material in the
    material master record. Normally the sales unit will be
    determined immediately from the master master record.

see the change log of material master in MM04.
check if the sales unit got removed recently (after the PO creation - before delivery creation)
if it is not caused by material master directly, then check if you have any userexit in place that changes the sales unit in the delivery.
SAP has a sales unit in mind which is not available in material master, hence it issues this error.

Cash Sale 106 has been saved (no delivery created)

Dear Team,
while Saving the Cash Order i am facing a error called Cash Sale 106 has been saved (no delivery created)
and also when i check the pricing
In pricinh Condition value is also showing 0
Can u help me out
Regards
VP

Hi VP
--Go To T.Code VOV8 & select your Cash Sale Document
--Under the Shipping Tab check the delivery type is BV
--Mark X for Immediate Delivery & Shipping condition is 10 immediate delivery & Save it
--Go To T.Code VOV7 item category BVN & Check the Billing Relevance u2013 B & Pricing is X u2013Std Pricing
--Change the shipping condition for customer in XD02, under Shipping Tab as 10-Immediate delivery
--Check the shipping point determinationu2014OVL2
Put Shipping condition for Customer u201810u2019+ loading group of Material + Plant+ Proposed Shipping point +Manual shipping point
--Check the Storage location Determination-OVL3
Shipping point+ Plant+ Storage condition + Storage location
--Check in Copy Controls in VTFA
--Check the Validity periods for you condition record in VK11 for the Material
Please let me know when your problem is solved
Regards
Pradeep

Delivery created even GTS block

Similar Messages

Maybe you are looking for