Delivery created with out stock

Hi folks,
             Sales order has been created for 'X' material,but there is 0 stock available for this material "X", ATP has been carried out and has proposed a further date, but when try to create a delivery,delivery documnet has been created even though there is 0 stock ( no stock ) for material 'X'.
How is this possible..................? actually SAP doesn't allow to create a delivery with out stock.............
please suggest.................
points will be rewarded................

Hello,
The system will allow you to create a delivery even if there is not stock. But it will not allow you to create post goods issue until the stock available in the storage.
I think there are user exits to prevent system to create the delivery if stock is not available.
Prase

Similar Messages

  • Delivery Created with out Material Number

    HI
    I created an STO for material, when i have done the VL10B i got a message "See log for information about creating deliveries"
    A Delivery got created with out the Material number, When i look in the Document Flow for the Delivery Created its preceding document (PO) is not linked
    In the log information i see an error, Please advise
    Diagnosis                                                                               
    The sales unit is not allowed for the material in item               
        000001.                                                                               
    System Response                                                                               
    The system does not allow further processing of this item.                                                                               
    Procedure                                                                               
    Check your entry.                                                    
        Select a sales unit which is defined for the material in the         
        material master record. Normally the sales unit will be              
        determined immediately from the master master record.

    see the change log of material master in MM04.
    check if  the sales unit got removed recently (after the PO creation - before delivery creation)
    if it is not caused by material master directly, then check if you have any userexit in place that changes the sales unit in the delivery.
    SAP has a sales unit in mind which is not available in material master, hence it issues this error.

  • Can position be created with out creating Job..

    Hi Experts,
    A simple question but quite complicated.
    Can position be created with out creating the job. ( yes it will give the warning and create).
    Here my actual question comes, what is the need of creating the Job. when we can create position without job in general Scenario.
    Is it compulsory to create job whenever we create position.
    Your replies are highly appreciated.
    Thanks in advance.
    Regards,
    Dollly

    Hi Dolly,
    I definitely aggree with what guru Sikindar mentions.
    One more point:
    SAP advises to create separate positions for each of the employees in your organizational structure.
    For example, there may be a hundred "Engineer" positions in your company (with codes: 50000001, 50000002, ... 50000100).
    At this point, when you're asked to take a report of all of the "Engineer"s in your company, then you need to enter all these position codes into the selection screen : Nearly impossible scenario!
    However, if you had linked all of these positions to a single job named "Engineer" and numbered "50000000", then you would be able to find all the positions linked to this job and all the employees holding these positions by entering a single object ID and evaluation path in the selection screen of a particular report.
    Regards,
    Dilek

  • My apple id cannot create with out credit card

    my apple id cannot create with out credit card

    To create an Apple ID without a credit card, you need to follow the instructions in this link:
    https://support.apple.com/en-us/HT204034
    Follow the instructions under "If you don't have an Apple ID" to create an Apple ID with None as the payment option.
    If you are using an existing Apple ID, you must put a credit card on the account before you can change it to None, as the instructions under "If you already have an Apple ID" indicate.
    Cheers,
    GB

  • Delivery deleted  with out reversing the GR in Inter company PO

    Hi Ever one
    Can any body suggest the below issue.
    By mistake user has deleted Out bound delivery with out reversing the GR in Inter company PO
    At the other end receiving site has sold the goods where I am unable to do reverse the GR bez stock is not available, even If create the delivery once again I need to do GR other wish It will be In transit.
    kindly help me out
    Regards
    sudha

    Hi Kishor
    yes, first Goods receipt has to be reverse, but user did mistake
    After PO creation, delivery and PGI in VL02N, and Invoice in VF01 finally GR in MB0A with ref to delivery
    in reverse also first GR need to be reverse in MBST and Invoice and delivery in VL09.
    but by mistake delivery has bee reversed in VL09 with out reversing GR where as it is allowing to do so( this delivery had not been Invoiced )
    Awaiting for your reply
    Thanks & Regards
        sudha

  • Delivery created with 0 quantity

    Hi,
    We have scenarion in which the delivery was created with 0 quantity.
    I am creating delivery using transaction VL10D. Even though there is no available stock, delivery was successfully created with 0 delivery quantity.
    Is this issue with material master or issue with Material availablity check.
    Regards,
    Shahu

    Dear,
    Basing on the control elements availability check settings in customizing.
    System Determines date for availability check on basis of earliest material availability date of all schedule lines in delivery.
    If there is insufficient stock the system behaves:
    1. Sufficient quantity of material not available by material availability date, a delivery quantity '0' is entered in delivery. If item category of delivery permits '0' quantity then it would be included elese item would not be allowed in delivery.
    2. Quantity available of material is lower than order quantity, system would enter available quantity as delivered quantity and order would get updated accordingly. If partial delivery is not allowed, this would be noted in delivery log.
    Regards,
    Syed Hussain.

  • Return delivery BAPI with out ref

    looking for  bapi or fm to create a return delivery with out reference.

    Hi Priya,
    Try below BAPI  programs
    BAPI_OUTB_DELIVERY_CREATENOREF
    SHIP_DELIVERY_CREATE_NOREF
    Regards
    Ram

  • Control over qty in outbound delivery created with reference to P.O

    Dear Gurus,
    I am trying to create a outbound delivery document with reference to the purchase order. But, the system is allowing more
    quantity in delivery document than in purchase order. How to control it.
    Regards,
    Krishna

    Hi,
    You can control this through item category fetched in delivery. Please check whether you have set error message or note about situation for overdelivery under following customization path;
    SPRO>>Logistics Execution>>Shipping>>Deliveries>>Define Item Categories for Deliveries
    Here for your relevant item category, check under quantity table the entry maintain under 'Check Overdelivery'
    You can set it as A- So that user get the note of the situation or B- so that it gives error message.
    Regards,
    Udaya.

  • Delivery should not create with out company code data

    Hi all,
              We have created a customer master without company code data with T code VD01 and subsequently created sales order and delivery with PGI and invoice also saved but no accounting document is getting generated. But we want to stop at delivery only; system should not allow creating delivery. Please do the needful
    Thanks in advance
    Regards,
    Nagesh

    hi nagesh,.
    from standard SAP it might not be possible.
    but check this work around:
    after creating the COMPANY CODE DATA by the marketing people only you please go ahead and create a delivery till that time the sales order will be in open status.
    if you want to stop it through the SAP system:
    then you need to contact TECHNICAL PERSON on the same:
    MV45AFZZ : USEREXIT_SAVE_DOCUMENT_PREPARE for checking while creating a delivery if not created then to throw an ERROR message - this is the only probability to check
    but he may not be having solution for your query.
    except the work around.
    please check and confirm
    balajia

  • Inbound delivery creation with out reference to purchase order

    As per my requirement i am third party warehouse who provides space for my customers . i receive  goods from lot of customers who have their own ERP system or may not be any ERP system . The goods i am going to receive is non valuated material. How do i receive GR in the above scenario.
    I am thinking to create one dummy purchase order and then create inbound delivery. Otherwise How do i create inbound delivery without reference to any documents?.

    Hi,
    Inbound delivery
    You can create  purchase Order(ME21N),inbound delivery in t.code: VL31N and Goods Receipt in t.code: VL06IG and post the goods wrt PO into the GR blocked stock (movement 103) and finally you can release goods from blocked stock to unrestricted stock with 105 Movement type, if satisfy quality or other criteriau2019s.
    Or
    As you said, you just keeping customer stock better create material with non-valuated material type UNBW and do regular process like PO, GR & GI etc.Inbound delivery  not required for above said process.
    Regards,
    Biju K

  • Issue in V_V2: Can system rescheduling the sales order with out stock

    Hello All,
    I created sales orders with one material. For that material the stock is zero now. The system has not confirmed the qty in sales orders while creating.
    After that as per the client we ran the V_V2 for rescheduling, but system has not rescheduled any schedu lines in any sales orders.
    Is it due to lack of stock?
    One more point is we do not have Delivery proposal option in sales order. Only One time delivery option.
    Is it due to this setting?
    Please help me to solve this issue.
    Regards
    Lakshmikanth

    Hi
    Because there is checking rule set at order level , thats why once stocks is not there due to unavailabilty of stocks system not allow to go for V_V2.
    for this u hav to deactivate under oVZ8/9
    thanks
    mk

  • Incorrect  status in delivery created with BAPI_OUTB_DELIVERY_SPLIT_DEC FM

    Hi, a cordial greeting.
    I turn on this opportunity to present a case being presented with the subsequent delivery split.
    Then the details:
    1.-  We have a couple of deliveries (A and B) in a shipment.
    2.-  To one generates a TO (A), but for the partial quantity of each item delivery. The other delivery (B), was not generating any OT.
    3.-  It confirms the previous OT.
    4.-  Delivery (A) that were processed its partial quantities, we made subsequent delivery split. It uses the BAPI BAPI_OUTB_DELIVERY_SPLIT_DEC.
    5.-  According to the split profile, confirmed quantities, are in the original delivery (A). The delivery result of the partition, it´s excluding from shipment, and the original delivery which keeps the split remainder, remains in the original shipment.
    6.-  The new delivery (C) is generated with the items and quantities that were not included in the TO of the first delivery (A).
    7.-  In this delivery (C), it sets the Transportation Planning Status as Completely Processed (VBUK-TRSTA = "C") at the header, but this is not included in any shipment.
    Described the situation, the problem occurs in the Transportation Planning Status that is fixed in the new delivery, which is incorrect, since it should set the status Not Processed (VBUK-TRSTA = "A").
    It should be noted, that if the subsequent split delivery is effected by the VLSP transaction to delivery to the above conditions, the new delivery fixes the Transportation Planning Status like No Processed.
    Appreciate the help you can offer in this case.
    Greetings

    Dear,
    Update VBUK-TRSTA field-by-field.
    Under the following conditions, the update should not run in the update task:
    If indicator "Execute billing" is set in the activity profile and new deliveries have been included in the transportation; or
    if indicator "Execute billing" is set in the activity profile and the overall status of the shipment cost calculation of the transportation has changed.
    Also note Customer-specific rules for the specification of the transportation planning status can be taken into account with user exit EXIT_SAPLV56U_007.
    Regards,
    R.Brahmnkar

  • Need urgent help -update customer account with out stock(Reserve Invoice)

    hi
    when we creating an invoice ,it will update both customer account and
    invetory account. i need only customer account. how can do with this function using oInvoice buisness object and oinvoices lines. i am using
    C#
    Thanks
    Edited by: sap_beginer on May 1, 2008 2:55 PM

    Its same as I wrote you in other thread, use service type of invoice as
    .DocType = SAPbobsCOM.BoDocumentTypes.dDocument_Service
    Petr

  • STO PGI happening with out stock checking

    Dear All,
    My base unit of EA. Order unit CV - Case. Conversion rate is 1 CV = 144 EA.
    While I stock in MMBE if found 143.998 EA.
    I raised STO for 1CV and created deliery (VL10B) and done PGI (VL02N) for 1 CV, system allowed me to proceed all these activities.  When  I am doing GR for STO it is throwing the error saying that PL stock in transit exceeded by 0.002 EA.
    How to over come this (i.e) during PGI itself system should not allow me to proceed as there are 0.002 EA is in deficit, Pls guide me how to proced now?
    Rgds
    Srini

    Dear Srinivasan
    Unfortunately we are not having any such control during PGI , No message settign also available if PGI qty is higher than the STO quantity. Take the help of your abaper if the Badi mentioned below is of any help to you- LE_SHP_GOODSMOVMNT this controls the qty duirng PGI. If not, there are two options. either maintain tolerance level in materialmaster ( purchasing value key) or Cancell th PGI doc in VL09 & re_ do the STO as per available quanitity and Do the Picking and PGI again.
    Regards

  • Invoice created with out GR and posted after GR matches

    Hi ,
    can you help any body regarding this issue, where i need to do settings and all.
    GE Water has the ability to enter invoices even if there is no goods receipt in SAP.  Invoice is entered and "R" block is placed on the document in SAP.  MRBR is run nightly to look at "R" blocks and see if they can be matched with goods receipt.  If match is found SAP removes "R" block and invoice pays.  If no match found, invoice still sits in SAP unpaid. Need SAP to be configured to do this in GE Energy. Currently if no goods receipt is found for an error message is received that no document exists.  On blanket PO's blank lines are shown and invoice can not be entered without creating GRIR issues and payments not posting to the correct accounts
    Thanks
    Madhu
    Edited by: madhu mandapati on Oct 23, 2008 12:47 AM

    Hi,
    This essentially shoud be put in MRBR only by creating ZMRBR probabaly
    You need ABAP development to put your desired logic
    You are entering invoice before GR it means that you are doing PO based invoice verification
    Then at the time of releasing blocked invoices you want system to Check the goods receipt
    and provide you the message and or work further as directed
    Please discuss with technical ABAP team
    Diwakar

Maybe you are looking for

  • How do I delete rows in Numbers for iPad?

    I am new to numbers for iPad. How do I delete rows in Numbers for iPad? I am able to delete the data in the rows/cells but I can't delete/move up the rows so I can move data in it's place.

  • Using adobe pro 9 to move photos out of jpeg into a word doc and keeping name of file as well

    Hi I had an issue at work today and I wanted to move 300 jpeg photos into word.  The file became very large and I query whether adobe pro 9 can reduce size of the picture and also the size of the file before putting it into word.  I also wanted the n

  • Export and Import Simultaneously

    Hi All, we daily get requests to sync a schemas. ex: copy data from user a to user b (both users are in the same database) as usual we take export of user A schema and import into user B. This process takes somewhere around 80 to 100 mins ( after tun

  • How to publish news without iWeb

    Hello, I would like to know if we can add news directly from the site without using iWeb, like a comment ??

  • How to use scheduling in Mapping?

    Hi, can i use the schedular in Mapping?. I have created a schedule, but dont know how to use it in Mapping. Does anyone some ideas oder example. Thanks Mandi