Delivery date mandatory and not defulted current date

Hi all,
I want to make the delivery date mandatory in the purchase Requisition and currently the current date is defaulted there , i want that nothing should be there initially.
Please provide the configuration setting.
Regards,
Kapil.

Hi,
U can make the delivery date field as mandatory in PR , by setting delivery date field as required entry in PR sscreen layout in customization.
Go to SPRO- MM - Purchasing - PR- Define screen layout at doc level - ME51N - Deadline monitoring - Delivery date ( Make this field as reqd entry ) and save it.
And regarding ur second question the default date should be blank, the date gets calculated here based on the planned del time maintained in materila master in MRP2 view.
So if the date showing is todays date when u r creating PR today means, the planned delivery time maintained in MMR is zero days.

Similar Messages

Date picker is not available in date/time field

Hi there,
I'm wondering while using a date/time field. Since I made some changes on this field the date picker (Arrow down right next to the field to show up a calendar) is no longer available. Has anybody got a clou what the problem might be or how I can bring the date picker back to this field.
Thanks in advance.
Best,
Maja.

Hi there,
I'm just wondering about the following settings/patterns:
As you can see this field is from the type "Date/Time Field". So far so good, but when I'm opening the dialog "Patterns", this dialog is just for a "Date Field" and not for a "Date/Time Field". No trouble so far, but the confusion thing is that the date picker is available in this field. Has anybody a clou how this is working? Or can anybody help me to convert a "Date/Time Field" to a normal "Date Field" which provides this date picker?
Thanks in advance and kind regards,
Maja

How Do i create a list that will show in a dropdown box with the list being pulled from another tab and not the cell data format junk?

How Do i create a list that will show in a dropdown box with the list being pulled from another tab and not the cell data format junk?
I currently run OS X 10.10.1
Now i have been trying to work on this for a while now and what i want to do should be simple but its apparently not.
Here is an example of what i want to happen.
I will have 2 tabs: Contact | Sales
Now Contacts will have the list of names and various information about a customer, While Sales will have one drop-down box for each Cell Row that will show the names of the person in tab contacts
for what i am wanting to do i cant use the data format pop-up menu because the list is edited everyday several times a day.
Now how do i do this, Excel can do this so how can numbers do it?

Hi Shegra,
Paste this into a applescript editor window and run it from there. In the script you may need to adjust the four properties to agree with your spreadsheet. Let me know if you have any questions.
quinn
Script starts:
-- This script converts column A in one table into an alphabetized list of popups. It copies the last cell in that column. Then reverts the column to text. It then refreshes popups in column A of a data table starting with a user defined row.
property DataEntrySheet : "Sheet 1" --name of sheet with popups to be refreshed
property DataEntryTable : "Sales" --name of table with popups to be refreshed
set copyRange to {}
property PopValueSheet : "Sheet 1" --name of sheet with popup values table
property PopValueTable : "Contacts" --name of table with popup values
set PopStartRow to {}
tell application "Numbers"
set d to front document
set ps to d's sheet PopValueSheet
set pt to ps's table PopValueTable
set s to d's sheet DataEntrySheet
set t to s's table DataEntryTable
set tf to t's filtered --this records filter setting on data Entry Table
display dialog "Start from row #..." default answer "" with icon 1 -- with icon file "Path:to:my.icon.icns" --a Week # row
set PopStartRow to {text returned of result}
tell pt --convert list to alphabetized popups
set ptRows to count rows
set copyRange to ("A2:" & name of cell ptRows of column "A")
set selection range to range copyRange
set selection range's format to text
sort by column 1 direction ascending
set selection range's format to pop up menu
-- popupsmade
set selection range to cell ptRows of column 1 of pt
set v to value of cell ptRows of pt
end tell
activate application "Numbers"
tell application "System Events" to keystroke "c" using command down
tell pt
set selection range to range copyRange
set selection range's format to text
end tell
tell t
set filtered to false
set tRows to count rows
set pasteRange to ((name of cell PopStartRow of column "A") & ":" & (name of cell tRows of column "A"))
set selection range to range pasteRange
tell application "System Events" to keystroke "v" using command down
set filtered to tf
end tell
end tell

VF01 Determine Billing date for billing index and printout to current date

Hi
we need to determine the Billing date for billing index and printout to current date
What can I do to determine automatically at the time of creation current day to Billing date for billing index and printout?
please let me know
Best Regards,

Hi Beatriz ,
You have two options here. you can chose either of these solutions:
1.
A. T-Code: VTFL ( if using del related billing) For the billing document and delivery, at item level assign the copying requirement 011 or if you are currently using some other routine then you can use following in that
VBRK-FKDAT = SY-DATUM.
B. T-code VTFA (if using order related billing)
Similar to A, using copying requirement 011.
2. You may also try option of Checking in the User Exit for the Program RV60AFZA & RV60AFZA.
Please let us know if this helps
Regards
Harpreet

How do I delete one of the user accounts on my computer and not lose the data in that account?

How do I delete one of the user accounts on my computer and not lose the data in that account?

I actually have the opposite of this problem. haha.
https://discussions.apple.com/thread/4484354

Having arranged some scanned pictures in an album in I-Photo how can I keep them in the order I have chosen when I move the album. They all have the scan date and not the taken date and move to new positions if I move them from one album to another.

Having arranged some scanned pictures in an album in I-Photo how can I keep them in the order I have chosen when I move the album. They all have the scan date and not the taken date and move to new positions if I move them from one album to another.
Is there any way to re-number them in the order I have chosen so that they can then be sorted by number? The scans are all from pre-digital images that I wish to move to a photobook and I don't want to have to organise them twice!
Thanks for any suggestions.

I was a bit short, Chris, sorry. It is limited, what can be posted, when typing on an iPad.
Now I am back on my Mac. I meant the following: Batch Change the date for a large range of photos, that should have a date stepped in increments.
Select all Photos at once and use the command "Photos > Batch Change".
Then set the date for the first photo and select an increment, e.g. one minute.
Now all photos will get a new date assigned, incremented by one minute, in the sequence you have selected. So you will be able to sort them by date. This way it will be unnecessary to change the titles or filenames.

When insert my lexar USB flash drive I get the message that the disk was not readable by this computer. It has worked previous to this and I do not want to lose the data by reformatting the drive. How can I reformat this drive and not lose my data?

When insert my lexar USB flash drive I get the message that the disk was not readable by this computer. It has worked previous to this and I do not want to lose the data by reformatting the drive. How can I reformat this drive and not lose my data?

You can't reformat it and not wipe everything on it.
Have you tried a different USB port?
Only other option, back it up on a different computer.

Jpeg attachments appearing as a .dat file and not .jpeg files

Please can someone tell me how I can change jpeg attachments that are coming through on emails on my new iPhone 5 as a .dat file and not as a .jpeg file.
These .dat files cannot be opened - I assume that this will happen with PDF files as well.
Thanks

I am surprised at this point in time no one has chimed in, seeing how many people have tried this in the pasta. I actually solved the whole clusters issue, but now I have discovered another problem that is making me throw in the towell on this one as I just can't explain it.
I am finding for some silly reason while the code will work in one VI it won't seem to work in another. See my photos below. The one where the code works, I have created the whole thing as a subroutine inside of a greater VI which I can not publish due to proprietary code. Next I tried pulling out the functioning part of the code and putting that in a stand alone file. See the photo where the code doesn't work. I have also ran the same code that doesn't work with both 1 and 2 variables. Each time Matlab can't open it. I am using the same to MAT subvi in each of these. For some reason though when I run the code in the working picture it runs, and I get a nice little mat file that I can open in Matlab. When I run the same exact code as a standalone I get the matlab error code every time.
I have tried reviewing every possible variable I can think of and worked with them. In all cases the two new VI's I made the code doesn't want to give me a valid mat file. However in the greater program it does! I am really stumped at this point. So unless I can find a better convert to matlab file code I don't think this will work.
Attachments:
where_code works.png ‏14 KB
where code fails.png ‏15 KB
matlab_error_code.png ‏23 KB

When I tried to Mail Merge for Data is is not exporting any data.

HI,
EBS-12.1.3
DB-11gR1
OS - RHEL 5.6
[With my Login User and SysAdmin Login User] When I enter into to the "People -> Enter and Maintain" Form and then I press the "Export Button", there is error Alert
Function is not available to this responsibility. Change Responsibilities or Connect to the System Administrator
I Added the Function "HR ADI Seeded Integrator Form Functions" into the "AE HRMS Manager" Responsiblity. It is also working and Export Data icon is enable.
Problem:
But Problem is when I tried to Mail Merge for Data is is not exporting any data.
====================================================================
Steps
1.Move to the "People -> Recruirment" and then "Request Recruitment Letter" .
2. Enter the New Request. as
Letter Name "App. Letter Contract Site",
Automatic or Manual = Manual.
Select the Name from the LOVs for the Request for Detail Block.
3. Press the "Export Data" icon.
4. Integrator Page Appear with my Custom Integrator Name as "Appointment Letter - Contact Site".
5. Select the "Word 2003" from the View List. and Reporting is Checked.
6. Review the Folowing Enteries as:
Integrator Appointment Letter - Contact Site
Viewer Word 2003
Reporting Yes
Layout App. Letter Contract Site
Content XXHR_MBE_APP_LET_CONT_SITE_V
Session Date 2011/08/02
Mapping XXHR_MBE_APP_LET_CONT_SITE_V Mapping
7. Press "Create Document" Button.
8. It will open the Excel 2003 and then Word 2003. But no data down download from the Form.
9. It open the Mail Merge Letter but no Data is Display.
===========================================================
Note:
a. I am following the Steps from the Link:"http://apps2fusion.com/at/38-ss/351-generate-recruitment-letters-web-adi".
b. From the "Desktop Integrator Manager", "Oracle Web ADI", "HRMS Web ADI", it is working fine and Dowload the Data.
===========================================================
Thanks
Vishwa

Please try the solution in ("Function not available to this responsibility" Error While Cliclking On Forms Personalisation [ID 1263970.1]) and see if it helps.
Thanks,
Hussein

Is there a way to allow setting of "Due Date for All Tasks" to current date in OOB Workflow

Is there a way to allow setting of "Due Date for All Tasks" to current date in OOB Workflow
I need to set it today because there are tasks that is needed to be completed on the same day.
Is there a way without modifying the page/form. like a configuration or something?
----------------------- Sharepoint Newbie

Hi ,
As Ajeet said, for implement your requirement, you can change the data validation on the Due data field.
You can do as the following :
Open the site with SharePoint Designer 2010
Click on Workflows on the left launch, then find ‘Approval-SharePoint 2010’, click on it
On the Forms section, click ‘ReviewApproval_***.xsn’
Then you can find Due Data for All Tasks, and change the validation
In addition, if you create an approval workflow with SharePoint Designer, you can use a specific date, it contains hour and minute.
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

I have microsoft word for for my Mac book pro. When I open saved letters /documents on word the date automactically changes to the current date. How do I stop this happening? Many Thanks

I have microsoft word for for my Mac book pro. When I open saved letters /documents on word the date automactically changes to the current date. How do I stop this happening? Many Thanks

I suggest you post your qeustion on the Microsoft Mac forums as it's their software you're having issues with and that's where the MS experts hang out
http://answers.microsoft.com/en-us/mac

The '' secondary data source is not a relational data source, or does not use an OLE DB provider.

Hi,
We are using Teradata as data source in SSAS 2008R2, it’s using ‘.Net Providers\.Net Data Provider for Teradata’.
In DSV, we have two data sources both using Teradata. While processing dimensions, all dimensions coming from secondary data source has error message”
The '' secondary data source is not a relational data source, or does not use an OLE DB provider.”
But we are not using OLE DB provider for now, we’ve searched some threads that named queries can be replaced for secondary ds, but since we have a lot of tables, it’s hard to implement using named queries.
Any inputs would be appreciated.

Hi memostone,
When defining a data source view that contains tables, views, or columns from multiple data sources, the first data source from which you add objects to the data source view is designated as the primary data source (you cannot change the primary data
source after it is defined). After defining a data source view based on objects from a single data source, you can then add objects from other data sources.
If an OLAP processing or a data mining query requires data from multiple data sources in a single query, the primary data source must support remote queries using
OpenRowset. Typically, this will be a SQL Server data source.
Here are the restrictions:
The primary data source should be SQL Server and support OpenRowset to the secondary data source.
Or you design the cube in such a way that rocessing for each object only needs to access data from a single data source
I recommand you refer to the following article:
Defining a Data Source View (Analysis Services):
http://technet.microsoft.com/en-us/library/ms174600.aspx
Regards,
Bin Long
TechNet Community Support

I have Elements 11. Sometimes, if I edit a photo in Elements Editor, the date gets changed to the current date. Why does that happen? It doesn't happen all the time, so I can't isolate the cause. Any ideas?

I have Elements 11. Sometimes, if I edit a photo in Elements Editor, the date gets changed to the current date. Why does that happen? It doesn't happen all the time, so I can't isolate the cause. Any ideas?

I have Elements 11. Sometimes, if I edit a photo in Elements Editor, the date gets changed to the current date. Why does that happen? It doesn't happen all the time, so I can't isolate the cause. Any ideas?

Mapping between oracle data types and ms sql server data types

hello
i need mapping between oracle data types and ms sql server data types
where can i find them ?

read this
http://download.oracle.com/docs/cd/E10405_01/doc/appdev.120/e10379/ss_oracle_compared.htm

Data Warehouse and ETL tools for data verification ?

Data Warehouse and ETL tools for data verification ?
How need to to data verification using ETL tool ? Also how to relate this thing to datawaehouse ?
Thanks in Advance

Hi Shyamal Kumar,
1) BW it self facilitates to do the ETL (Extraction Transformation Loading) steps:
     example:
                 Extraction - from SAP or other data bases
                 Transformation - using transfer rules, Updates rules
                 Loading - Loading into ODS, Cube, master data
2) Typically used ETL tools in the industry are:
     a)   datastage from Ascential (owned by IBM)
     b)   Informatica
     c)   Mercator
Regards, BB

Delivery date mandatory and not defulted current date

Similar Messages

Maybe you are looking for