Delivery date time format in when logged in German
Hi All,
I have a case statement for the 3 types of deliverydateformat: DeliveryDateTime , DeliveryYearWeek and DeliveryYearMonth.
the format for these 3 types are 'D', 'W' and 'M'.
I have separate processing for these 3 types in the case statement.
When logged in German, the formats are different from 'D' , 'W' and 'M'.. Hence my case statements are not executed.
Please let me know if there is some conversion routine for these DeliveryDateFormat.
Many Thanks,
Srilakshmi B
If your coding was copied from MV45AI0R_RV45A-KEDATU_EINGABE
everything should be OK
For special date-format issues check function CONVERT_DATE_TO_INTERNAL
Similar Messages
-
Delivery Date Time spot contains unformated value in PO in Auto PO creation
Hi Experts,
We have created a program that fetches the recent changes done in Purchase Requisition documents given as input and updates the corresponding Purchase Order document created from those PRs accordingly. We are using the FM BAPI_PO_CHANGE for the purpose of updating the changes to the POs. We are facing a peculiar situation while updating the scheduling lines. When we are passing the delvery date (EKET-EINDT) change, the system automatically passes the delivery date time spot (EKET-UZEIT) in an unrecognised format, something like '00::0:1' instead of '00:00:00'. Due to this the system doesn't allow to open the Purchase orders since it is giving format error message. This issue does not happen in debug mode but happens in the foreground without the debug on.
Please let me know how to go about solving this issue
Thanks
DevarajanHi ,
Thanks for the reply. But the issue is we are not passing any value to the Delivery Date Time Spot field (EKET-UZEIT). So by default when the BAPI_PO_CHANGE FM is called the value passed to this field is '000000'. It is that the system automatically changes the value to '00::0:1'. And it does so only if we execute the program without debugging the code. May be there might be a OSS note to update.
Thanks
Devarajan -
Importing ansi date time format into diadem
Hi,
I have an ANSI data log txt file with the time channel format 30/03/2006 15:51:08.846 and i am trying import into DIADEM using the date/time format dd/mm/yyyy hh:nn:ss.fff , but when the file is imported, the time channel cells appear as NO VALUE. Can anybody help please ?
AdeKHi Adek,
Here is a DataPlugin which loads your data file into DIAdem 10.2. There are a number of advantages to using a DataPlugin over the ASCII Import Wizard, so long as your data files follow a similar data file structure. To register the DataPlugin, just detach the ZIP file, unzip the URI file within, then double-click on the URI file in Windows Explorer. After that, you will be able to load your TXT data files by dragging&dropping them directly from the NAVIGATOR tree view or Search Results into the Data Portal on the right hand side of DIAdem. DataPlugins also support selective loading, register loading, reduced loading, and DataFinder indexing, so all of these immediately become available to you with your TXT files. Note also that header lines 2-4 are now declared as both File and Group properties.
Ask if you have questions using the DataPlugin,
Brad Turpin
DIAdem Product Support Engineer
National Instruments
Attachments:
Adek_TXT.zip 2 KB -
Wrong DATE-TIME FORMAT among REPORTS NOTIFICATION EMAILs
Dear all,
I create a report request with url
https://ocixxxx2.oci.xxcl.net/reports/rwservlet?>destype=printer&desformat=PDF&server=rep_xxxxx2_orahome&userid=ixxxxxx/xxxxxxx@saas¬ifysuccess=IASL¬ifyfailure=IASL&report=R1000R13.rdf&jobname=R1000R13&desname=HPLaserJet4150PCL6
Email notification was generated with wrong date format .
It's expected to be in UK English but it shows encoded text , may be random. I route it to another email servers such that find the date time is in chinese characters . That caused problem on original email server in which was not supported
Could any expert please advice ?
Warmly
Edited by: MosielleKwan on 2010年2月26日 下午11:31It's indeed an expected behavior.
When a Reports Server starts on a Windows machine, it likely detect the Windows Regional Settings in order to use it when needed later. This let the Reports Server communicate in the same format/way the Server machine uses. For example, if the System / Application Server administrator prefers to use the Windows (on which the Application Server is installed) with Chinese Regional Options, it is normal that the Reports Server send the Notification Email with a "Date/Time" Format matches the Windows.
Thence, you like to get English/Western Date and Time format in the Reports Server Notification Email, it is required to change the Windows Regional Settings from Chinese to English and restart the Reports Server and restart the corresponding compoent. This will let the Reports Server detect the change and will send the Notification Email(s) then with English/Western Date and Time formats.
If English/Western Date and Time format in the Reports Server Notification Email but still have the Windows Regional Settings set to Chinese, you can implement it
that :-
1. Change the Windows Regional Settings from Chinese to English.
2. Restart the Reports Server and restart others.
3. Change the Windows Regional Settings back from English to Chinese. .
With these 3 steps, the Reports Server will keep sending the Notification Emails with English/Western Date and Time format, and maintain original settings. -
Hi there,
I live in the United States but prefer my dates to be in the dd/mm/yy format as opposed to the US mm/dd/yy format. I also like 24-hour time rather than AM/PM. I System Preferences>Language & Text>Region, I found the tool to modify my preferred date/time formats. However, I notice that the format of the date in my menu bar does not change (it still reads Sep 25 when it should read 26 Sep). All other dates/times appear to function correctly. I briefly switched the Region of the computer to the United Kingdom but quickly switched it back because of how autocorrect handled words like "color."
Ideas?That did the trick - sometimes the easiest thing to do is hard to see. Seems I have been working too long on a Windows machine (unfortunately, I have to do so at work)...
Thanks for the quick help! -
ASN Delivery Date/Time Issue
Hi
We are having issue wherein vendor navigates to Create ASN screen from DCM screen there he enters the ASN number, Shipping date and time, quantity and PO number etc. After this he presses the Check button for calculating delivery date and time. Here instead of adding number of hours mentioned in Means of Transport entry to Shipping time, system adds some fix number hours to MoT hours and calculates the delivery time.
But if vendor directly goes to Create ASN screen then system only considers number of hours mentioned in MoT entry. I want to know from where system is adding this fix number of hours while scheduling delivery date/Time.
ThanksHi ,
Thanks for the reply. But the issue is we are not passing any value to the Delivery Date Time Spot field (EKET-UZEIT). So by default when the BAPI_PO_CHANGE FM is called the value passed to this field is '000000'. It is that the system automatically changes the value to '00::0:1'. And it does so only if we execute the program without debugging the code. May be there might be a OSS note to update.
Thanks
Devarajan -
Difference between LV 6.1 and LV 7.0 - Date\Time Format
I found different behviour of numeric controls in Date/Time format, or
in "Seconds to Date\Time String" function in LV6.1 and LV7.0
In LV 6.1:
Absolute time in seconds is formated in control with date/time format,
output depends on local time format on computer, where this VI runs.
So if I start LabView on machine with specific time zone, and for
example DST on, the output was changed by these settings. ANY number
of second is handled by this settings.
In LV 7.0:
Output still depends on specific time zone, but the use of the DST
on/off depends on absolute time value. So if the number represents
absolute time which fits period when DST was off, the output is
wihtout DST, even if the DST is on when this vi runs.
The solution in LV 7.0 is much more better than in LV 6.1, but ...
If data are measured and stored (store of absoulte time DBL) in one
time zone, and if they are processed in different time zone (for
exapmle where DST change is in different time), the data
representation is wrong.
In LV 6.1 it was not correct too, but anyway there was a way how to
solve this problem:
I stored absolute time DBL and GMT delta for every time stamp. When I
process this stored data on different computer with different time
zone, I recalculate time stamps in this way:
absolute time + stored GMT delta - GMT delta of computer where data
are presented.
So in final I have correct time does not matter on time zone or any
other settings which are on computer where are data presented.
But on LV 7.0, the GMT delta is not constant for every data and this
algorithm is useless. I can simply show correct time when data are
from same time zone without any calculation, but it is almost
imposible to correct show data
from different time zone.
My question is:
Is there any "ini file item", which can tell LabView 7.0 to use time
representation style as in LV 6.1 ?
Thank you and best regards
Jiri HulaThanks for the well written question.
Unfortunately, there is no ini token or any way of specifying LabVIEW use the LV 6.1 style.
I am attaching a LabVIEW 7.0 VI that calculates the UTC Offset for a given time value (I don't think the same code would work correctly in LabVIEW 6.1). The VI comments are:
The attached VI will take Daylight Saving and Time zone into account to compute the offset in seconds from UTC Time to the Local time (as specified by the computer). Note: This VI can aid in converting from Local Time to UTC time, but not in converting from one Timezone to another.
I hope it helps. Basically, your data is in UTC (absolute time) as it has always been, but LabVIEW 7.0 changed the way it displays the UTC data (trying to be more correct). If you wish to display it the way it was in LabVIEW 6.1, things are going to get a little tricky. LabVIEW 6.1 displayed the same DBL absolute time differently depending on if the current computer time was in DST or not. To get this behavior in LabVIEW 7.0, the equation:
absolute time + stored GMT delta - GMT delta of computer where data are presented
is still correct, but for LabVIEW 7.0 the GMT deltas now vary depending on whether the absolute time is in DST or not. It may be possible to convert the GMT offset you have saved from LabVIEW 6.1 into a set or pair of UTC Offsets. This would require a knowledge of what the DST state was for each of the data points in question.
The DST state or GMT/UTC offset that the computer currently is using may be obtained from the attached VI.
The absolute time is stored in GMT/UTC so that in different time zones it will still equate to the same time, even though it will be displayed differently. Another data format (such as storing the Hour, Minute, Second, Day, Month, Year; or storing the date as a string) might be more appropriate if the time should be displayed as the same local time regardless of the time zone.
I hope this helps. Please respond if you have any comments or questions.
Shawn Walpole
Attachments:
GetUTCOffset.vi 52 KB -
Specifying date time format in Finder
How can I specify the date-time format in Finder for the "date-modified" and "date-created" columns in list view?
About three years ago, I got a command line instruction to set these formats and I kept it at mm/dd/yy
Then a couple days ago, I changed the date format in iStat menus and the date-time formats started acting weird. I want the dates to be like "07/08/05" (mm/dd/yy) and then the formats started changing to "November 07, 2008" (month/dd/yyyy). This change seemed to take effect any time I open the view options for a folder. Now I discovered that the date format change depending on the column width according to the format specified in system preferences, international, formats.
Narrow column, short date format; a little wider to long format, with ellipses if the column is not wide enough; then full format.
Does anyone know the command line to set the format to keep it to the one I want?this doesn't seem to be it. however I now like the way Finder does display dates -- format gets more compact as the width of the column decreases; although there still is some excess space left on the left -- perhaps for AM & PM which I don't use; I use a 24 hour time format instead.
Happy New Year -
Convert Epoch Date Time to Date Time format
I am trying to convert Epoch Date time in GMT to Human Readable Date time format in UTC. I used the one below but it returns just the date in GMT but how can get datetime in UTC ?
select To_Char( To_Date( '01.01.1970 06:00:00','DD.MM.YYYY HH24:Mi:Ss') + STARTIME / 86400,'DD.MM.YYYY HH24:Mi:ss') FROM HQ_AVAIL_DATA_RLE;
I refered a couple of forums and applied everything, but still I wouldn't get the timestamp.
Please note that i'm looking for datetime stamp, not just the date.
Thanks in advance!
Edited by: 830754 on Jan 27, 2011 11:18 AM
Edited by: 830754 on Jan 27, 2011 11:19 AMWorks for me. I see date and time (submitted 1000 for STARTTIME):
select To_Char( To_Date( '01.01.1970 06:00:00','DD.MM.YYYY HH24:Mi:Ss') + 1000 / 86400,'DD.MM.YYYY HH24:Mi:ss')
from dual
TO_CHAR(TO_DATE('01
01.01.1970 06:16:40Or do you mean something else? -
Date/Time Format Stored Procedure Calls in ADVANCE MODE in JDBC ADAPTER
Hi Experts,
What is significance of Date/Time Format Stored Procedure Calls in ADVANCE MODE in JDBC ADAPTER.
Thanks,
ABDURI guess this would be applicable for the folowing formats - DATE, TIME, TIMESTAMP.
This is the correct link
http://help.sap.com/saphelp_nw04/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/content.htm
Regards,
Prateek -
GregorianCalendar datetime format convert to sql server date time format
please help me
my GregorianCalendar date time format is like this. *08/01/29 02:25:59* . I try to insert my database(sql server 2000 )
data type is datetime ,in my database table display like this *2029-08-01 02:25:59.000* .can you help me to insert correct date in my database table like ( . *08/01/29 02:25:59*)use [PreparedStatement |http://java.sun.com/javase/6/docs/api/java/sql/PreparedStatement.html] and setTimestamp:
[http://java.sun.com/docs/books/tutorial/jdbc/basics/prepared.html] -
How to get the date time format in OCI
How to get a date time format in OCI instead of only date
You would have to use the OCIDateTime datatype for this. Refer to
OCI documentation for more details. -
Date time formatting issues!!!!
guys,
I am trying to format date and time in the same variable.
heres my code...
<cfset dtimes = LSDateFormat(now(),'YYYY-MM-DD
h:mm:ss')>
the problem is, that it gives me the year month and day
correctly.... the hour correctly, but where the minute is supposed
to go, it gives me the month again (which makes sense cuz obviously
its the same characters)... and then seconds are ok too. how do i
fix it so it gives me the correct minutes? Thanks in advance!!!!
JEA limitation of CF functions there is not a single date &
time format
function you have to combine the two.
<cfset dtimes = LSDateFormat(now(),'YYYY-MM-DD') & ' '
LSTimeFormat(now(),'h:mm:ss')>
johnegbert wrote:
> guys,
> I am trying to format date and time in the same
variable. heres my code...
>
> <cfset dtimes = LSDateFormat(now(),'YYYY-MM-DD
h:mm:ss')>
>
> the problem is, that it gives me the year month and day
correctly.... the
> hour correctly, but where the minute is supposed to go,
it gives me the month
> again (which makes sense cuz obviously its the same
characters)... and then
> seconds are ok too. how do i fix it so it gives me the
correct minutes?
> Thanks in advance!!!!
> JE
> -
Sql ---sum of Date-time formate ......
id time
1 1.20
2 2.30
3 4.20
4 5.30
5 1.00
result expected = 14:40 or (if AM/PM so result is ???)
how can i calculate the sum of time ???
please give me some fast tricks of handling date/time formate in oracle....942425 wrote:
id time
1 1.20
2 2.30
3 4.20
4 5.30
5 1.00
result expected = 14:40 or (if AM/PM so result is ???)
how can i calculate the sum of time ???
please give me some fast tricks of handling date/time formate in oracle....Hi,
First you post in wrong forum. Please post at PL/SQL
Before posting there close it and mark as answered.
if your time is number data type then you can try this
SELECT SUM(NVL(ROUND(TRUNC(DAC_OT_HOUR)+((TO_NUMBER (SUBSTR (DAC_OT_HOUR, INSTR (DAC_OT_HOUR,'.',1,1)+1)))/60)),0))
FROM DA_CHECKHope this helps
Hamid
Mark correct/helpful to help others to get right answer(s).* -
Batch file - how to Date & Time Format as January 6, 2014 - 8:54 PM Eastern
Batch file - how to Date & Time Format as January 6, 2014 - 8:54 PM Eastern
Hi Dhiravia,
If you want to convert the month format, please refer to the batch script below:
SET Month=%DATE:~4,2%
if %Month%==01 set Month=JAN
if %Month%==02 set Month=FEB
if %Month%==03 set Month=MAR
if %Month%==04 set Month=APR
if %Month%==05 set Month=MAY
if %Month%==06 set Month=JUN
if %Month%==07 set Month=JUL
if %Month%==08 set Month=AUG
if %Month%==09 set Month=SEP
if %Month%==10 set Month=OCT
if %Month%==11 set Month=NOV
if %Month%==12 set Month=DEC
echo %Month%
To convert the date format via cmd, please also check this article:
http://myblog4fun.com/archive/2012/01/06/getting-the-current-date-and-time-from-bat-files.aspx
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Maybe you are looking for
-
Can't uninstall/update Can't find iTunes.msi file
Something happened to my itunes. Could have been my daughter's creative genius or any one of a thousand other things.... All I know is (and I don't use iTunes a lot) I can't get iTunes to load. When I click on my desktop icon or try to run it from my
-
Deleted PO Approval Notification Accidently, now cant approve Draft. (2007)
My Customer accidently deleted an approval notification. The PO displayes in the Document Drafts report, but when the user drills down into the draft to add it, they get a message: "An authorization for this document has allready been sent. Document
-
Problems with iTune rentals?
My rental download was interrupted by an error "There wa a problem downloading (movie). An unknown error occurred (-50). Please check that the connect to the network is active and try again", but it is connected! Help please?
-
Multiple Previous Level Eliminations
Hi experts, We are developing a Consolidation app in Netweaver 10. The requirements are to provide different audit members for conso adjustments depending on the origin of the data, that is imput data or manual adjustments. It is doing it ok in a pla
-
does somebody know how to get to the desktop via hot corners whilst being in full screen mode? it doesn't work on my mac... :/ thx for helping!