Delivery Date with Zero Order Quantity in Sales Order

Dear All,
I have created a sales order in va01 with different delivery date in schedule lines. I want to save delivery date with zero order
quantity because he has not delivery on time.

Dear All,
I have created a sales order in va01 with different delivery date in schedule lines. I want to save delivery date with zero order
quantity because he has not delivery on time.
Deatils :
Delivery Date     Order Quantity  Delivery Qty
02.09.2011       10                    10
05.09.2011       10                    10
09.09.2011       10                    10
15.09.2011       10                    10
21.09.2011       10                    0
Now i want to insert a new schedule line 10.10.2011 with order quantity 10. or 21.10.2011 schdeule date with 0 quantity.
Presently system can't save schdeule date 21.09.2011 with o quantity.

Similar Messages

  • Free goods determined in Delivery over Order Quantity in Sales Order Item

    Hi Gurus,
    I've a problem about using free goods determination.
    First I created free goods master record with following information
    ZG1010012060075 From 100 PC -> Free good ZG1040012060075 2 PC
    Free goods Category = '2' (Exclusive)
    Free goods delivery control = 'E' (Delivery proportional to quantity in main item)
    Then I've created Sales Order with
    Item 10 ZG1010012060075 4,000 PC.
    Item 11 ZG1040012060075(Free good) has been automatically determined for 80 PC
    Then I've splitted Item 10 into 4 deliveries. The result of free goods determine in each delivery are as follow:
    Delivery#1)
    Item10 ZG1010012060075 = 1,176 PC
    Item20 ZG1040012060075 = 24 PC
    Delivery#2)
    Item10 ZG1010012060075 = 1,176 PC
    Item20 ZG1040012060075 = 24 PC
    Delivery#3)
    Item10 ZG1010012060075 = 1,176 PC
    Item20 ZG1040012060075 = 24 PC
    Delivery#4)
    Item10 ZG1010012060075 = 472 PC
    item20 ZG1040012060075 = 9 PC
    *Remark : Total quantity of 'ZG1040012060075'(free goods) = 92424+24 = 81 PC
    (Greater than 80 PC)*
    I think the system determined free goods in Delivery#4 correctly due to rounding up. But It might not be over the order quantity in Sales Order Item 11. Even though I've set the item category in delivery with Check overdelivery = 'B' (Situation rejected with an error message), the free goods are determined over order qty. BUT if I change delivery qty in delivery#4 Item20 from 9 PC -> 8 PC -> 9 PC, the error message occurred.
    My point is to fix the system not determine free goods in delivery items over order quantity in sales order item.
    Has anyone met this situation before? Do you have any idea about this issue?
    Best Regards,
    Prachya Lalitnorasate

    Dear Sai,
    Thank you for your advice, but it didn't solve my problem.
    I would like the system to determine free goods with proportional to main item AND In the last delivery main item delivered completely free goods must be determined equal to remaining open delivery item.
    Do you have any idea about configuration/customization?

  • Restricting order quantity in Sales Order

    Hi Folks
    I have a requirement that my material can only be ordered in multiples of 5 KG, 15 KG and 25 KG. Could you suggest how can i control the ordered quantity in sales order ?  is there a standard way in SAP to do it or does it require customization.
    Thanks

    Hi
    The delivery units like in the multiples of 5  like 5 or 10 or 15 can be maintained in sales org data 1 tab of the material master delivery units field
    Having set this So when creating the delivery if the multiples are not properly given the system will throw a warning message message no V4 and 081
    You can set this message as errr message in t code OVAH
    But there is a risk involved here
    If the delivery units is maintained as mutiples of 5  that is  5 ,and 10 and 15 like that in MMR sales org data 1 tab andin OVAH it set as error message V4 and 081 then if the sales order is for 21 units then the delivery will be allowed only till 20 units
    So carefully lookimg at many angles this should be used
    Regards
    Raja

  • In which table,i could find order quantity for sales order..??

    In which table, i could find order quantity for sales order..??
    and also in which table i could find delivery for sales order..
    need help..??
    Moderator message: please search.
    Edited by: Thomas Zloch on Feb 23, 2012

    Check the table AUFM.
    Give the order number in AUFNR.
    For movement type 261 (GI) & 101 (GR), you can get the material document number (MBLNR), Material (MATNR), Qty (MENGE) & UoM (MEINS).

  • How to get the back order quantity for sales Order

    Hi Friends,
    I want to get the back order quantity for sales order . in MD04 t-code,
    there is a field(MDEZ-MNG01) for Received Qty/ Required qty.  But MDEZ is a structure.
    I tried from MDTB table, but the table is not updated with the values in MD04.
    Please guide me from which table I can get the back order Qty for sales Order
    (ref: t-code  MD04, MRP element = CusOrd).
    Thanks,
    Sagar

    >
    VIdya Sagar wrote:
    > Hi,
    >
    > Isn't  there any difference b/n Open Sales Order and Back order??
    Yes Quite Difference.
    Read:
    http://www.sap-img.com/sap-sd/explain-the-meaning-of-an-open-sales-order.htm
    http://help.sap.com/saphelp_sbo2005asp1/helpdata/en/b6/bdb9b2f02842348c9edbe78af863c4/content.htm

  • Order quantity on Sales Order

    Hi All....
            When we create a sales order with reference to Quotation, then the quantity will be copied from quotation. Later on if user tries to change that quantity in sales order then it is giving a warning message......but what we need is a error message rather than a warning message....so that user will not be allowed to change quantites which are copied from quotation.
    Thanks in advance....

    Hi Rajesh and Vinay...
             Thanks for your replies.....
    I went in to that of message variables but how to proceed from there...every thing is greyed out....
    Regarding that user exit they want me to do this in configuration.....
    The message no which i am getting for warning is V1503
    Thanks in advance......
    Message was edited by:
            ravi chimmili

  • Required delivery date not to be cpoied into sales order from quotation

    My requirement is that required delivery date should not be copied when i create a sales order with reference to quotaion,
    In the sales document types i have unchecked propose delivery date .it works fine while creating quotaion but then when i create sales order with ref to quotation the required delivery date is copied into the sales order which i dint want.
    Kindly guide me on this

    Hi,
    I think if u dont want to copy only required delivery date from QT to OR  you need to write the routine and has to assign in VTAA -Coping requirements.
    if u assign 502 it ill not copy quantiy in schedule lines i think.
    Just ask your ABAPer about 502 , if it work then assign the same to ur document types in VTAA.
    Hope this will helps u
    Regards,
    Ramesh
    Edited by: Ramesh on Mar 30, 2009 11:25 AM

  • How to pass delivery date through BAPI while creating a sale order

    Dear frndz,
         I am using 'BAPI_SALESORDER_CREATEFROMDAT1'
    to create a sale order .
        I don't have any problem..
        But I have to pass schedule line delivery date through this bapi .
       I used REQ_DATE in structure BAPISCHDL.
       But I can' t get it.
       Through which parameter can i meet this..
       The sale order should be created line item wise along with my delivery date..
      Any suggestions...
    regards.
    siva

    Dear frnd,
        Danq for your response..I can't use DLV_DATE for this requirement..
        But I used REQ_DATE in the structure BAPISCHEDULE .
       I came to know that the problem i faced previously  was only
    internal data conversion.
        Now am able to pass my delivery date..
        so I am closing the thread..
    Regards.
    siva

  • Req. delivery date and Delivery date should be same in a sales order

    Hi experts,
    We need a customization for getting Requested delivery date, Material Availability date and Delivery date should be same.
    Example if I keep request delivery date as 12/12/2012, system should consider same dates for MAD and Delivery and confirm the requested quantity.
    How to achieve this customization..
    Thanks,
    Bala.

    system should consider same dates for MAD and Delivery and confirm the requested quantity
    What you are going to achieve by this?  Hope you know the concept of MAD and confirmed quantity fields.  Let us assume, if stock is not there for a material for which sale order is created, can you let me know, you want the system still to confirm the quantity? You can post the goods issue only if system confirms the quantity in schedule line which is possible, only if stock is made available.  If client asks something which is not possible in SAP, think in a logical way how SAP works and convince them accordingly. 
    G. Lakshmipathi

  • Zero confirmed quantity in sales order

    Hi Experts,
    In a sales order, there is a material for which confirmed quantity is zero in the schedule lines.
    I checked the stock in MMBE, there is around 46 qty in unrestricted.
    Still confirmed qty is zero. Order is not processed since many days.
    I cant figure out why this is happening.
    Am I missing something?
    Please guide.

    hello, friend.
    this means that product allocation is active in your system (QAS).  even if there are stocks existing, but the allocated quantity to your sold-to's order is limited or non-existing, then you cannot confirm sales order.
    you have several options:
    1.  increase the sold-to's allocated quantity, if the previous allocation has already been reached
    2.  if sold-to's allocation has still not been reached, and stocks have already been allocated to other sold-tos, increase overall stock availability (but this is easier said than done)
    3.  deactivate product allocation, re-run availability check (or re-enter items in order) to confirm quantities
    regards.

  • Minimum order quantity for sales orders

    Hi,
    I need to check the configuration settings where the sales orders can be blocked if the ordered quantity is less than that of minimum order quantity.
    Pls threw some light on this.
    Points assured
    Kitty

    Dear Krishna
    Go To OVAH t code
    message class V4 and message no 082
    Change from warning to error
    The mininum order qty for a material can be set in sales org data 1 tab
    If for a material mininum order qty is set to 10 and if an order is placed for anything less than 10 you will get error message straight away
    No need of any userexit
    With Standard customizing it is possible
    This has has been tested by me recently and you too can test it
    Regards
    Raja

  • Total of the ordered quantity in sales order

    Hi
    Is there any settings or functionality for the totalling of the order quantity in the sales order as the user requires to see the total number of the units of quantity of order taken and if its less they can still ask for more order from the customer so that the truck is used for its fullest capacity for transport of the materials.
    thanks
    AJ

    Hi AJ,
    In the standard system up to ERP 5.0 you could use weight and volume for aggregation. Not very useful.
    In SAP ERP 5.0, there is a new functionality called "loading units".
    Quick copy/paste from the release notes:
    As of SAP ECC 5.00, SCM Extension (EA-SCM 500) you can use a loading unit in Dynamic Transportation Planning of the DSD Backend process. A loading unit is an additional capacity limit that limits the maximum delivery quantity of a vehicle. A loading unit is a unit of measure that is independent of the units of measure in order processing.
    For aggregation purposes, the delivery quantities are converted into the loading unit using their conversion factor in the material master. The total quantity in the loading unit is calculated in the order and the delivery and displayed together with the aggregation categories. The loading unit is also shown for information purposes in the shipment as the sum of the deliveries contained in the shipment.
    It says SCM Extension, but that's not APO, only an extension, so it is part of the standard system. Even if it is part of the DSD Backend, you might think of using it independently of DSD.
    Best Regards,
    Franck

  • Order quantity in sales order

    Hi all,
    In my sales order when I enter the materials and quantity in the item level it does not updates the total quantity. Can anybody give the reason for this? Is it something wrong with my document type customization?

    Dear Sonia Plate
    Please check in Copy control -- UPDATE Document Option is updated
    As per my understanding You have created sales order but unable to check Updated Qty IN MD04 ? If it is right
    Run this program SDRQCR21 Then only it will be updated
    please clear Your issue
    Regards
    venu gopal

  • Change order quantity in sales order

    Hi,
    I have a sales order created. Now i want to change the Order qty depending on certain conditions through  an ABAP Program. Can any one tell me how to change it? I tried bapi SD_SALESDOCUMENT_CHANGE ..but couldn't succeed. I tried passing field to  req_qty in table ITEMS_EX and update flag in table ITEM_INX along with item number.please correct me where i went wrong?
    Thanks,
    Bhaskar.

    i stand in awe ... is such a thing legal in your country? you create a sales-order, probably sent a confirmation document (including quantities, prices and so on) to the customer and then you change the quantity according to some constructed logic?
    would you care to describe what the business-process exactly demands at this stage?

  • To POP up the open sales order quantity in Sales order

    Hi gurus,
    I hav a requirement that for example,I raised an order for 100 Qty and delivered 80 materials 20 is open,So when i raise an order for the same material for 50 Quantity,I need to get POP up box saying that 20 qTY IS OPEN. in Sales order.
    I am an SD consultant Please assist me in doing this requirement.
    Regards
    Narayana
    Edited by: manam narayana on Feb 6, 2008 12:08 PM
    Edited by: manam narayana on Feb 6, 2008 12:30 PM

    Hi Usha,
                    Thanks for ur early reply,can u make it clear for me.Like when i enter a sold to party  and material in VA01,This should check the open order quantities for a particular combination of sold to party and material and POP UP a message saying that the customer has open quantities for this material,So this Open quantities i found in VBBE table.Can u please explain me in clear how can i compare the values in T.code VA01 to VBBE table and how can i get  POP UP message.
    Regards
    Narayana
    Edited by: manam narayana on Feb 6, 2008 12:15 PM

Maybe you are looking for