Delivery Document has been created - showing the status of Being Processed.

Hi All.
I am facing the following typical problem.
1. Sales order has been created - showing the status of COMPLETED.
2. Delivery Document has been created - showing the status of Being Processed.
3. Goods Issue document created successfully- showing status as COMPLETE
4. Billing Document has created successfully - showing the status as COMPLETED.
5. Customer Account got updated properly.
Query: Despite of completion of SO, DELIVERY, GOODS ISSUED, AND BILLING DOCUMENT u2013 and accounting document is cleared why the outbound Delivery document status is showing as BEING PROCESSED.
If I go T-code Vlo3n see document flow
Delivery 5080789885 being processed.
Go to VF03 document flow also it is showing
Delivery 5080789885 being processed.
Aditya

Hi ALL,
Further to my query I would like to clarify the following:
It is happening since 2004 all Bom components status (Delivery being processed) all the BOM main items header status is showing completed.
It not impacting the business, but suddenly user raise query SO, DELIVERY, GOODS ISSUED, AND BILLING DOCUMENT completed why still delivery showing as being processed.
1. I have checked at SO level -- all the line items were delivered. ie: delivery, goods issue, billing completed.
2. I checked the Header Level data completed and Item Level data being processed.
3. If I look into the each item level also it is showing as being processed.
4. Even the SALES ORDER HEADER LEVEL showing the status of Completed.
5. Removed credit check in delivery.
The only issue is OUTBOUND DELIVERY DOCUMENT: Status alone it is showing as ' Being Processed' -- surprisingly!
Aditya.

Similar Messages

Document has been checked out by A user for processing

Hi Friends,
We have three status in our process. CT (Create), IW (Inwork), RE(Release).
We have following doc. status type for each status.
CT- I (Initial)
IW- O (Original Processing status)
RE- S (Locked stats)
User A has created document. Uer B has changed status to IW . User C trying to change to RE. In that case we are getting the following message. Document has been checked out by A user for processing.
We are having Characteristics associated to doc. type. Those are not able to change while in RE release mode.
I change the doc. status type to
CT- I
IW - C (Check in Status)
RE- S
and
CT- P
IW - I
RE- S
Even then problem remains the same.
How to get rid of this.
Regards,
Sai Krishna

hi,
U can use only, Primary staus P
And chec in status C
And relesed statuse S
This should work
Benakaraja
??p

Can the message, this document has been sent to the printer be turned off?

I have the Officejet Pro 8500A
When ever I send a document to print I get a message that the doc has been sent to the printer, I also use PDF creator and get the same message. Can this be turned off?

You should be able to turn this off. Here are some steps to try.
1.Right-click the Windows taskbar, and then click Properties.
2.Click the Taskbar tab.
3.Under Notification area, make sure the Hide inactive icons check box is selected, and click > Customize. > 4.Under Current items, make sure the Printer icon is set to Always hide. Then click OK two times. >
Let us know if this helps, Thanks !
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

After a library has been created with the "Copy items to the iPhoto library" option unselected, can it later be made to create those copies?

iPhoto 9.4.3
iPhoto Library Manager 3.6.8
MacBook Pro - OS X 10.7.5.
I have a large number of iPhoto libraries, organized with iPhoto Library Manager, that I created with the "Copy items to the iPhoto library" option unselected because I wanted easier access to the individual files. I am now going to be migrating to a new computer and have run into some problems with iPhoto losing the path to the file, and as a result showing me the exclamation point of doom. What's more, the program doesn't seem very intelligent about rebuilding those lost connections, and I have to go back through and correct it manually almost one at a time. How do I get around this problem?
If I rebuild my new computer from a Time Machine backup (I usually enjoy taking this opportunity to start from a clean slate, but...), will the paths all be preserved without me needing to abandon my organization system?
Or is there some way to ask iPhoto or Library Manager to create and organize copies of all the photos in the library that are not currently present within the library?
On a tangentially related note, what's the best way to save keywords (and ideally also faces) added in iPhoto to the photos' meta data?
Much obliged.

Not with iPhoto by itself. If you have the lastest version of Aperture and iPhoto referenced libraries can be converted to managed with Aperture.
You can convert to a managed library with iPhoto Library Manager by rebuilding the library with iPLM. This will create a new, managed library with all your photos in it and with all Events, albums, keywords, titles, descriptions and places intact. However, books, calendars, slideshows and cards will not be retained. They will end up as albums containing the photos.
OT

Best way to see if a Delivery No has been created starting with Sales Order

Thanks.

From VBFA table
Go to VBFA table
In the field VBTYP_N = 'J ' and VBTYP_V = ' C ' and execute..
You will get all the deliveries which are created with respective sales order....
J -- stands for delivery C -- Stands for sales order..
Please let me know if you need furthe info
Regards
Satish Boguda

Impdp specific schema from dump which has been created using full=y

Hi,
I have received a dump (expdp) which has been created using the parameter FULL=Y. I just want to import (impdp) only one schema into my database. I have used remap_schema and exclude=grants. The schema i want to import is carried out successfully, but in my import log i keep getting the messages such as :
ORA-31684: Object type TABLESPACE:"TS_BCST1" already exists
ORA-31684: Object type USER:"OUTLN" already exists
ORA-31684: Object type SEQUENCE:"SYSTEM"."MVIEW$_ADVSEQ_GENERIC" already exists
How can i use impdp only to import objects under my specific schema and not have impdp attempt to create system/sys users and its objects, create tablespaces, etc etc.
Kindly assist.
Regards,
Karan

Use SCHEMAS parameter in the impdp command to import the scpecific schema.
Eg.
impdp system/password schemas=user1 remap_schema=user1:user2 directory=dir dumpfile=user1.dmp...........
You can specify list of schemas you want to import with , (comma) saperated in the SCHEMAS parameter.

BAPI 001 No instance of object type purchaseorder has been created

Hello All,
I get teh following error message in SC monitor (backend application error) as well as in RZ20. I tried to push into backend but no luck.Scenario Classic.SRM 5.0
Shopping cart XXXXX(PO XXXXX) BAPI 001 No instance of object type purchaseorder has been created.
The latest log in BBP_PD
0000000001 I1111 Item in Transfer Process X
0000000001 I1112 Error in transmission
Any clue is appreciated.
Muthu
Edited by: Muthuraman Govindasamy on Oct 7, 2008 2:59 PM

Hi Andrea
We can create a PO vis sourcing cockpit in classic mode.
SC: Error in transmission BAPI 001
Note :- 973952 and follow the Peter instructions. This error message misleads
regards
Muthu

The invitation status shows 'pending' but no email has been received by the team member.

I have invited a team member to our creative cloud. The invitation status shows 'pending' but no email has been received by the team member. I've canceled the invite and tried a few times. Is there another route?

Please check with another Email ID that if the Email invite is being send.
Check the domain of the person whom you are inviting, it might have some securities attached.
Let us know the status.
Regards
Rajshree

Delivery status still 'Being Processed' although invoice had been created

Dear all,
I have a problem in production server.
Delivery status still 'Being Processed' although invoice had been fully created and status is cleared.
First, I get a problem when I tried to create invoice refer to this DN. Then I applied a message (execute report ZZBRE003: update table VBUK-WBSTK & VBUP-WBSTA = 'C'). Invoicing was created and status was cleared. But the delivery status still 'Being Processed'.
Could you help me, how to make this delivery status: Completed?
thanks,
Fella

Dear Fella,
I think that you haven't posted GI (confirmation of service) for the full delivery qty. Please check GI status for each item in the delivery. If any item shows partial delivery, post GI for the balance qty.
If any item has Partial Delivery Indicator 'D', the order can never have status 'fully delivered'. You must complete such items by entering a reason for rejection.
If that is not the case, there is a chance that copying ctrl (Delivery->Invoice) is not configured correctly. Choose a right value for 'Update Document Flow' in the copying control for the Invoice type from the delivery type used.
Please reward if helpful
Regards,
Noufel P

Is it standard behavior for VL10A/table VEPVG to show two records when a Sales Document has been blocked?

Hi Experts,
Is it standard behavior for VL10A to show two records when a Sales Document has been blocked? Their only difference is the field Delivery Block. In VL10A, the first record has a delivery block of BLANK, the second has 99.
Here's how to replicate the issue.
Create sales order.
When you check VL10A, the Sales document is there.
Change sales order field (RSD) in VA02, Save.
When you check VL10A, there are now two records, one has a blank delivery block, the other has 99.
The expected result here is that after changing in VA02, there will be only 1 record in VL10A and it should have delivery block of 99.
Assumptions:
1. We know that VL10A retrieves its records from VEPVG. The problem is, in VEPVG, delivery block is a key field. So I think that during VA02, when the delivery block of 99 is assigned, this creates a record in VEPVG instead of updating the existing one. Is this standard behavior, and are my assumptions correct?
Thanks in advanced experts. Appreciate your prompt response,
Jack

Hello Jack,
This is the standard behavior. When I check in our system, I too can see two entries but with different good issue date and delivery date and the block is specific to good issue date, delivery date.
So there is no problem in it. try to give the delivery date which includes two table entries delivery date and execute the transaction VL10A.
Regards,
TP

For iOS the ipad version shows the folio that has been published, but the iPhone app is not.

I am responsible for handling the apps and not at all involved with or know how the folio creation process works.
When I build the app for iOS the iPad version shows the folio that has been published, but the iPhone app is not showing the folio.
Is this something related to the build process or how the folio was created?
The folio also shows up in the Android app (at least the phone I have tested with).
Thanks,

"Android and iOS viewers have different requirements for displaying folios. Any folio size you create can appear in an Android viewer. The articles are scaled and letterboxed as needed. However, on the iPad, the viewer displays only folios with a 4:3 aspect ratio. The iPhone viewer displays only folios with a 3:2 or 16:9 (1136x640) aspect ratio."
Here is the entire post if you'd like to read more: Digital Publishing Suite Help | Creating documents for multiple devices

How to get the exact time when condition records has been created?

Hello All,
Can anyone thorw some light on - how to find the exact time on which a particular condition record has been created?
I have tried to get it from KONP {by inputting condition record number}, but unfortunately time is not tracked over there, but the date is tracked.
Await your valuable inputs on the same.
Regards,
Hrishi

Dear Hrishi,
Try with this
Go to display mode of the condition record through VK13 transaction from the condition record overview screen go to menu Environment >Changes>Click on Change report now system will take you to the Change Documents for conditions selection screen here you input proper selection data then execute now system will give the all the details here you can find the time also.
I hope this will help you,
Regards,
Murali.

How to get the times a document has been opened

Does somebody know if exists any kind of property attached to documents that can tell who many times a document has been opened? Or there is a way to know this in a different way?
Thank you in advanced.

Hi Pablo,
To obtain such statistical information wecan implement KM apis.. in the sense create repository services That can count the actual number of times a document is accessed
see this link for repository services
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how to develop with the repository framework apis.pdf
Also refer to the following forum Looking for way to count a specific document hits(Not with Activity Report) for further assistance.
Hope this helps,
Regards,
Uma.

IDoc Error IDocs showing the status 53 "Application Document Posted".

Hi All
IDocs showing the status 53 "Application Document Posted". But values are not updated in SAP.
Plaese sugggest on this,
Thanks
Ajit K Barik

Ajit, there might have been a dump--check in ST22 or a update termination error, check in SM13.
Either of these you'll have to take help of your ABAP consultant to analyse.
Regards,
Raghu.

Error workflow has been created successfully, but failed to publish and will not be listed in the Project Center

hello,
when i try creating projects in Project center am posted on with this error.
Your new XXXX workflow has been created successfully, but
failed to publish and will not be listed in the Project Center.For more information on the failure, visit the My Queue Jobs page or contact your administrator.
Any help would be appreciated!!!!!
Thanks regards, Vignesh.

hello Rouyre,
Thanks for ur reply
Am using
Microsoft Project Server 2013
15.0.4420.1017
Yes! It is Custom EPT with Custom Workflow(Declarative Workflow) built through VS2012
after associating the Site workflow with EPT i try creating Projects using my Custom EPT since then am posted on with this error.
ULS Error:Log
07/04/2014 10:21:38.03 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue
ad3fy Critical
Standard Information:PSI Entry Point: <unknown> Project User: <unknown> Correlation Id: <unknown> PWA Site URL: SA Name: <unknown> PSError: <unknown> A queue job has failed. This is a general
error logged by the Project Server Queue everytime a job fails - for effective troubleshooting use this error message with other more specific error messages (if any), the Operations guide (which documents more details about queued jobs) and the trace log
(which could provide more detailed context). More information about the failed job follows. GUID of the failed job: 39cd36d6-3603-e411-b33e-00155d00091f. Name of the computer that processed this job: 3eebbc1d-7558-4050-bf5d-d985b23b89f5 (to debug further,
you need to look at the trace log from this computer). Failed job type: ReportWorkflowProj...
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.03* Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue
ad3fy Critical
...ectDataSync. Failed sub-job type: ReportWorkflowProjectDataSyncMessage. Failed sub-job ID: 1. Stage where sub-job failed: (this is useful when one sub-job has more than one logical processing stages).
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.03 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue Jobs
ad3fy Medium
Error is: GeneralQueueJobFailed. Details: Queue Attributes: 39cd36d6-3603-e411-b33e-00155d00091f 3eebbc1d-7558-4050-bf5d-d985b23b89f5 ReportWorkflowProjectDataSync ReportWorkflowProjectDataSyncMessage 1 2c1ea19c-5849-002d-b89f-50aaf0a752fd
. Standard Information: , LogLevelManager Warning-ulsID:0x000DD158 has no entities explicitly specified.
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.03 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Project Server Database
ah91z Medium
Successfully got the connection string (database name=[ProjectWebApp_Practice], id=1f6004ae-5d8a-41d2-81f9-e424a31484aa, type=Consolidated). Requested access level=ReadWrite: Data Source=XXXX;Initial Catalog=ProjectWebApp_Practice;Integrated Security=True;Enlist=False;Pooling=True;Min
Pool Size=0;Max Pool Size=100;Connect Timeout=15
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.04 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue Jobs
ad3fz Medium
PWA:http://XXXX:10000/PWAPactice, ServiceApp:Project Server Service Application, User:PROJECTSERVER\system, PSI: [QUEUE] receiver http://XXXX:10000/PWAPactice: Group 3bcd36d6-3603-e411-b33e-00155d00091f type = ReportWorkflowProjectDataSync aborted at
Message 1, LogLevelManager Warning-ulsID:0x000DD159 has no entities explicitly specified.
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.04 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue Jobs
ad3f2 Medium
PWA:http://XXXX:10000/PWAPactice, ServiceApp:Project Server Service Application, User:PROJECTSERVER\system, PSI: [QUEUE] receiver http://XXXX:10000/PWAPactice: Group 3bcd36d6-3603-e411-b33e-00155d00091f correlation 82705dc5-3603-e411-b33e-00155d00091f
type = ReportWorkflowProjectDataSync failed at Message 1 Errors: GeneralQueueJobFailed, LogLevelManager Warning-ulsID:0x000DD15C has no entities explicitly specified.
2c1ea19c-5849-002d-b89f-50aaf0a752fd
Thanks regards, Vignesh.

Delivery Document has been created - showing the status of Being Processed.

Similar Messages

Maybe you are looking for