Delivery for subcontractor

Hi Gurus,
while performing a delivery for a subcontracting vendor, the system is not allowing to deliver the goods. In ME2O it is giving the error message essential transfer paarameters are missing in record 000001.
I checked in vl03 the status of the line item says, fully picked.
can anybody please help me with this
Thanks
Anusha

Cancel the movement through manual 542 and get back this stock from the subcontractor to your storage location.
It does not matter if the 541 transfer to subcontractor is done in MM or using a SD delivery. The result is the same: A 541 movement.
The delivery is helpful for the picking, but not mandatory, you can do this process through MM stock transfer.
Regards,
Franck

Similar Messages

  • Automatic creation of delivery for a PO

    Hi,
    We are in ECC 6.0. We have a requirement to automatically  create delivery for a product based on PO.
    Here is the scenario:
    We have a sub contracting scenario where in material MAT1is made by breaking up MAT2. 1CAR of MAT1 is made from 2 CAR of MAT2 and packaged.
    Now the requirement is when a when a Purchase order is created MAT1, we also manually create a delivery for MAT2s  for the subcontractor to pickup the stock of MAT2 to make MAT1.
    The requirement is when I create a PO for MAT1, the system should automatically create a delivery for MAT2. MAT2 is always in stock.
    I hope my explanation is clear.
    Can some body suggest me if there is a way to do this?
    Thanks.

    Hi,
    I would try to build solution based on WF events related to PO creation. Once PO is created(saved in system), the event is being raised. Here you can build function where you check whether PO is for MAT1 -> if yes -> raise automatic delivery creation for MAT2 (two possibilities:
    1. use bapi 2. batch imput).
    for this, you have to have some WF knowledge.
    hope it helps.
    regards,
    wojciech

  • Urgent Delivery for Subcontracting

    Dear All,
    I have a question regarding the delivery. We use VL10d for creating the delivery for STO Purchase orders. We enter shipping location and PO number in VL10D.
    Is there anyway similar we can do for the subcontracting PO. In subcontacting PO no shipping tab is generated. Please let me know the way to do the deliveries for subcontracting PO's.
    Thanks..
    Suraj

    Hi,
    Basically in ME2O, u can create a delivery for the materials which can be on a single or multiple POs. Once the material is sent to subcontractor, the consumption against particular PO can be identified having different batches for the same.
    This delivery doesnot have actual hardcoded reference to PO unlike outbound delivery for STO or SO.
    Steps:
    ME2O - In initial selection screen, enter PO vendor & execute. Then in subsequent materialwise, you will list of POs under the node "Requirements via SC Orders". Select material & click on Create Delivery button. You can create seperate delivery for the each individual PO qty or single delivery for cumulative  PO qty. Go on entering the data requested & continue.
    Thanks & Best Regards,
    Devendra Gaware
    PS - Reward if found useful.

  • Inspection UD for subcontractor quality stock

    Dear All SAP Guru's
    I have created one PO , in that stating to delivery at subcontractor and selecte the appropriate checkbox in the PO .After MIGO stock posted to subcontractor with movment type 101 O in quality .Our QM consultant release the inspection lot,he found that there is no stock to post to unresticted.And stock remains in the quality only after  inspection lot cleared with UD.
    Please suggest the solution.
    Thanks and Regards
    Mahesh Lotake

    Hi Mahesh,
    For subcontracting  -- stock types available are Unrestricted and Blocked ( no QI stock is there ).
    Regards
    Ankur

  • Delivery for subcontracting

    Hi,
         Could anyone tell me when the delivery has to be done for subcontracting and when the goods movement 541 should be used. The transaction ME20 doesnt exist when i tried to create delivery for the subcontracting PO.
    Thanks in advance
    Aparna

    hi
    the code is ME2O and not ME20
    Process Flow
    This scenario consists of the following steps on goods delivery:
    Purchase order creation based on a scheduled purchase requisition created by last MRP run
    Optional: manual purchase order creation
    Purchase order approval (if required)
    Components of the Material sent to the subcontractor through a Transfer Posting
    Creation of Subcontracting Challan
    This scenario consists of the following steps on goods receipt:
    Goods receipt for purchase order delivered by subcontractor
    Component reservations and consumption of component quantities as provision of material
    Reconciliation of Challan
    Completion of Challan
    Invoice receipt by line item
    Invoice verification and validation of tax expenses
    Outgoing payment
    Key Points
    BoM explosion triggers follow-on functions such as delivery to subcontractor
    Automatic posting of value flow
    Automatic posting of stocks into corresponding stock types
    Subcontracting info record shows added value
    regards
    kunal
    Edited by: kunal ingale on Aug 14, 2008 7:53 AM

  • Replenishment delivery for material with MRP areas and Avl Check

    HI We have MRP area at storage location level maintained for materials. Stock exists in the plant in the storage location which is part of the MRP area.
    Now when I create STO and try to create delivery for the same, system is giving message 0 stock available and not creating delivery. Material has 02 Avl Chck group.If I deactivate the MRP area in the material master, it allows creation of delivery.
    How can I ensure that system creates delivery even though stocks exist in MRP area relevant sloc only in the plant?
    Sriram

    1) According to SAP when inbound deliveries are used and your delivery item category is set up for mvt type 101, these should be received with transaction VL32N. If you use MIGO/MB0A instead the GR status in the delivery will not be updated. If you then report on open deliveries you'll notice that nothing is received in the course of time. Amazing. Now if you set up the delivery item category without the movement type your inbound will not even be GR relevant. Just one of these things that's nice to be aware of.
    Check note 199703.
    may b it helps...

  • How to create a single delivery for two sales orders?

    Hi Experts,
    I need to create one delivery for two sales orders. But it fails.
    The route, shipping point, ship to party are same for both orders but INCOTERMS are different.
    Delivery date, Good issue date, loading date,material availability date, transportation planning date for 1st order is 12/07/11 and for second order is 14/07/11.
    I have created delivery on 14/07/2011 but the delivery is created for 1st order only, the second order is missing in the delivery.
    It not happened because of incoterms.? different dates
    Kindly help regarding this.
    Thanks
    Raghu

    Prerequisite for Grouped delivery
    1. Header data should be same like Inco terms,Payment terms
    Go to VL10A
    Enter the sales order Numbers and execute
    Select the sales order Nos  for the group delivery and select "Background"  Tab in Tool Menu Bar
    If delivery is created coloured line items will get generated
    Check the log for delivery docuements
    Check and confirm
    Senthils

  • Open Qty is not copied in Delivery for Stock Transfer Order

    Hi,
    In the Stock Transfer Order process, Once the STO Order is created, I am creating delivery in the transaction VL10B or VL10G.
    When I am clicking the background button Delivery gets generated. Then when i am going in the transaction VL02N and increasing the delivery Quantity which is more than STO order quantity, the system is accepting it. But i want the system to throw an error message if the delivery quantity is more than the order qauntity. For this I have made the following settings.
    In the Transaction Code 0VLP, i have selected B in Check Over Delivery field. But still it is not throwing an error.
    The reason for the same may be, the system is not copying the Open Delivery Qty from the STO Order (Which normally happens in Sale Order to Delivery process, bcos of Copy Control). This field has 0 value. So the system is not able check for over delivery.
    If I get this value in the delivery then it should be working fine and the sytem will throw an error for over delivery.
    Can you please suggest me a way to get this open qty value in delivery for STO order or suggest me some other option to check for over delivery in STO.
    Regards
    Vijay

    Dear Friend,
    If I can understand you clearly.
    to achieve your task the best way you can sit with your abaper and configure a routine and assign the same to T-code OVLK delivery type customizing :
    In the Item requirement : Generally it is 202
    reward points if helpful,
    regards,
    Amlan

  • Auto-create delivery for multiple sales orders

    I would like to ask how to create auto-create 'single' delivery
    for multiple sales order during release sales order in R11i.
    It is found in my example during release sales order, multiple
    sales orders fulfill release sales order criteria, a single pick
    slip is generated but it is found that each sales order have
    individual delivery with it. It will casue multiple pack slips
    for a singles pick slip. Is it normal feature for auto-create
    delivery, or any setup to solve it?
    Thanks in advance.

    Am not able to do Single Delivery for Muktiple sales orders
    Have you searched the forum for this question as to why you were not able to generate ??  It could be due to multiple reasons.  Please search the forum and update here what steps you have taken after taking the inputs from here, if the problem is still not resolved.
    thanks
    G. Lakshmipathi

  • Create a single delivery for different schedule lines in the scheduling agr

    Hi
    I want to create a single delivery for different line items with different delivery dates in the scheduling agreement,  as Iam aware it is possible to combine different line items into one delivery through sales order.
    Need your inputs
    Aravind

    Hi,
    Try with below solution and see I am not confirm about this
    VL01N >>> Menu outbound delivery >>> Deliver sales order
    Here you put order number and selected date as your ANOTHER SCHEDULE LINE
    Kapil

  • Inbound Delivery For Scheduling Agreement Lines using LSMW

    Hi,
    We need to create inbound deliveries for scheduling agreements. Our scheduling Agreements are too big with 200 lines. But the vendor used to send only few discrete lines in his ASN. Is it possible to create inbound deliveries for the Scheduling agreement using LSMW? Is there any standard BAPI or IDOC available to handle this in LSMW? Has anyone done this before?
    Our requirement is as follows.
    1. Create Inbound Delivery for few lines of the Scheduling Agreement
    2. The delivery quantity of the inbound delivery will be a partial quantity of the Scheduling Agreement
    3. Materials are batch managed and the batch number for each inbound delivery item need to be captured.
    4. Vendor's ASN Number and its item number need to be captured at inbound delivery header and item level respectively.
    Note: Delivery Schedule of the Scheduling Agreement is not used in the above scenario.
    If you have any input, it will be really appreciated.
    Regards,
    SP0526

    Hi,
    You can give your scheduling agreement number in the field Purchase Order.
    If you want select from the list, you can click on PO tree (just under create inbound delivery). There selet document category as "L". You will get the scheduling agreement list.
    Regards,
    Prabu

  • How to create one inbound delivery for multiple purchase order?

    Hi Experts,
    Please let me know how can I create one inbound delivery for multiple purchasing documents(PO or SA)? 
    Is there a configuration needed for this?  If yes, please let me know the configuration to make this happen.
    Appreciate your help on this.  Right answers will be rewarded.
    Thank you.
    with regards,
    Muthu Ganapathy.

    Hi,
    my situation is:
    - a WM managed warehouse, society A;
    - a HU managed warehouse (without WM), society B;
    - a purchasing process of HU from society A towards society B.
    Society B have a scheduling agreement; when a delivery schedule appears, in society A born a sales order and a delivery. After the registration of the delivery good issue, an idoc transfer information for inbound delivery creation.
    This process is ok without WM, but with a WM managed warehouse the idoc has the following problem:
    "V51VP - item was not found - process cancelled".
    Can you help me to transfer these HU?

  • How  to create one delivery for two sales orders?

    Hi Experts,
    I need to create one delivery for two sales orders. But it fails.
    The route, shipping point, ship to party are same for both orders but INCOTERMS are different.
    Delivery date, Good issue date, loading date,material availability date, transportation planning date for 1st order is 12/07/11 and for second order is 14/07/11.
    I have created delivery on 14/07/2011 but the delivery is created for 1st order only, the second order is missing in the delivery.
    It not happened because of incorterms.? different dates
    Kindly help regarding this.
    Thanks
    Raghu

    Hi
    To understand splitting behavior, see SAP Note 546668 - FAQ: Delivery split when creating deliveries. And yes, incoterms happens.
    I think that with the help of question 6 you can try to force the merging of SO. Then, see SAP Note 166397 - Delivery split according to customer field ZUKRL, and handling the field ZUKRL in a VOFM in the copy rule I think that you can try to do it.
    Finally See  Note 4505 - Duprec when adding delivery (VL04, VL01, VL10*) to avoid problems while you are merging.
    Regards
    Eduardo

  • How to create one delivery for multiple sales order

    Hi!! Friends,
    Can some one explain the steps to be followed in creating one delivery for multiple sales order in SAP SD.
    Regards
    AKASH
    Message was edited by:
            AKASH TAMBI

    Hi.,
                  You can combine different orders in to one delivery ,But for the customer Order combination should be checked in  the sales area data of the shipping tab,we can combine orders but the ship to party,Route,Inco terms,Shipping date,shipping point should be same,you can do in T.code VL04 & VL10
    REWARD if helpfull
    Thanks & Regards
    Narayana

  • One delivery for Multiple sales orders

    Dear friends,
    Am not able to do Single Delivery for Muktiple sales orders. Can you guide me what r the configuration settings i have to do on this?
    Regards,
    Madhav

    Am not able to do Single Delivery for Muktiple sales orders
    Have you searched the forum for this question as to why you were not able to generate ??  It could be due to multiple reasons.  Please search the forum and update here what steps you have taken after taking the inputs from here, if the problem is still not resolved.
    thanks
    G. Lakshmipathi

Maybe you are looking for